[ubuntu-tn] Embedded Linux

[Amine Aouled Hamed]

what message? you mean about the USART1 issue? well, if you check the
electrical schema of the board, you will see that USART1 is connected to a
capacitor, and you need some configuration to make it work properly.
USART6(and others as well) don't need such configuration.


On Sat, May 3, 2014 at 7:41 PM, ilbreebchi tn <breebchi.com at gmail.com>wrote:

> I've got this message too a few days ago. I didn't get why it is! But for
> other reasons, I switched to USB VCP. It works properly.
>
>
> 2014-05-03 17:44 GMT+01:00 Amine Aouled Hamed <amine.ahd at gmail.com>:
>
> Hello again,
>> well my problem with USART1 was that it was connected to a capacitor,
>> therefore I was received corrupted messages from the board.
>> I change to USART6 as someone advised me in the ST forum and everything
>> was good.
>>
>>
>> On Sat, May 3, 2014 at 12:56 AM, ilbreebchi tn <breebchi.com at gmail.com>wrote:
>>
>>> Hey guys,
>>> So, if ever, one would want to make this be a community project, what
>>> does one need to do? How would the community organize itself to make sure
>>> of getting results?
>>> Well, to be honest, I really like the idea of getting the community to
>>> work on embedded projects, this one seems fairly consistent to start with.
>>> Sincerely.
>>>
>>>
>>>
>>> 2014-05-02 3:04 GMT+01:00 Ahmed Sghaier <ahmed.sghaier at ubuntu.com>:
>>>
>>> Hello,
>>>> I am interested in high level development on ARM platforms like RPI and
>>>> BBB.
>>>> I might find more free time during the summer to work a little bit on
>>>> some high level embedded projects (I will consider contacting you anyway to
>>>> check if you are working on something in common or if you want to join
>>>> another project)
>>>> Good luck for your project.
>>>> Best regards.
>>>>
>>>>
>>>> On Thu, May 1, 2014 at 11:07 PM, ilbreebchi tn <breebchi.com at gmail.com>wrote:
>>>>
>>>>>  On Wed, Apr 30, 2014 at 11:21 PM, ilbreebchi tn<
>>>>> breebchi.com at gmail.com> :
>>>>>
>>>>>  Why do one need to change the USART for the USART6 ? What diffrence
>>>>> does it make? I mean what in USART6 is needed for U-Boot to run and is not
>>>>> in the other USARTs on the board?
>>>>> Thanks!
>>>>>
>>>>>
>>>>>
>>>>>> 2014-04-30 18:14 GMT+01:00 Amine Aouled Hamed<amine.ahd at gmail.com>:
>>>>>>
>>>>>> well my project is supervised by my teacher and its a school project
>>>>>>> too.
>>>>>>> what I have made till now is :
>>>>>>> -I've got a clue on how U-boot really works, how the different
>>>>>>> header files and C files are linked to each other and what files I need to
>>>>>>> change.
>>>>>>> -I've found a U-boot version that supports the STM32F429-Disco board
>>>>>>> (made by Emcraft, here <https://github.com/EmcraftSystems/u-boot>)
>>>>>>> and it works for my board as well ( you need to change the USART to USART6).
>>>>>>> -My partner is currently working on the kernel, we are working on
>>>>>>> the UClinux kernel (here <http://www.uclinux.org/>).
>>>>>>> my first goal is just to run it on the board, by using the Emcraft
>>>>>>> version. I will then try to study what files need to be changed and how
>>>>>>> they work.
>>>>>>> as for Node.Js, a quick search led me to this link<http://events.linuxfoundation.org/sites/events/files/slides/nodejs-presentation_0.pdf>,
>>>>>>> it describes how to build Node.Js for ARM processors, thats a good starting
>>>>>>> point.
>>>>>>> this link <http://howtonode.org/how-to-install-nodejs>, tells that
>>>>>>> a Linux host is needed to install Node.Js along with some dependencies.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Apr 30, 2014 at 5:48 PM, ilbreebchi tn<
>>>>>>> breebchi.com at gmail.com> wrote:
>>>>>>>
>>>>>>>> I am interested! I am actually working on a little school project,
>>>>>>>> which is to take end by mid may, on an STM32F4Discovery (VG). And I had in
>>>>>>>> mind to work on porting node.js this summer. But I have no idea how to do
>>>>>>>> it. Could you give me more details on the advances you made on your
>>>>>>>> project? I can participate if that doesn't bother you.
>>>>>>>>
>>>>>>>>
>>>>>
>>>>> 2014-05-01 18:18 GMT+01:00 Amine Aouled Hamed <amine.ahd at gmail.com>:
>>>>>
>>>>>> Hello,
>>>>>> I would like to know if there are people here who are interested in
>>>>>> Embedded Linux projects or are working on some right now.
>>>>>> I am currently trying to port the Linux kernel to the STM32F4-Disco
>>>>>> board with my teacher and I have made a good progress.
>>>>>> please let me know if anyone is interested in making other projects
>>>>>> or is looking for someone to help him in something.
>>>>>> have a nice day.
>>>>>>
>>>>>> --
>>>>>> Ubuntu-tn mailing list
>>>>>> Ubuntu-tn at lists.ubuntu.com
>>>>>> Modify settings or unsubscribe at:
>>>>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-tn
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> Ubuntu-tn mailing list
>>>>> Ubuntu-tn at lists.ubuntu.com
>>>>> Modify settings or unsubscribe at:
>>>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-tn
>>>>>
>>>>>
>>>>
>>>> --
>>>> Ubuntu-tn mailing list
>>>> Ubuntu-tn at lists.ubuntu.com
>>>> Modify settings or unsubscribe at:
>>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-tn
>>>>
>>>>
>>>
>>> --
>>> Ubuntu-tn mailing list
>>> Ubuntu-tn at lists.ubuntu.com
>>> Modify settings or unsubscribe at:
>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-tn
>>>
>>>
>>
>> --
>> Ubuntu-tn mailing list
>> Ubuntu-tn at lists.ubuntu.com
>> Modify settings or unsubscribe at:
>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-tn
>>
>>
>
> --
> Ubuntu-tn mailing list
> Ubuntu-tn at lists.ubuntu.com
> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-tn
>
>
-------------- section suivante --------------
Une pièce jointe HTML a été nettoyée...
URL: <https://lists.ubuntu.com/archives/ubuntu-tn/attachments/20140503/ef1bee6b/attachment.html>