tascam us 122
soifran
soifran at piem.org
Mon May 14 01:15:04 BST 2007
yes! it's working!
still need to finish the conf of the machine and jack, having a lot of
xruns with one xmms playing via jackasyn at 69.7 ms latency.
still browsing.
thanks for the advice
soifran
Le dimanche 13 mai 2007 à 13:10 +0100, Toby Smithe a écrit :
> You should just install the alsa-firmware and alsa-firmware-loaders
> packages.
>
> On Sat, 2007-05-12 at 12:56 +0200, soifran wrote:
> > hi everybody
> >
> > after the install of ubuntustudio on a hp dv1253ea laptop, i tried to
> > configure a tascam us122 soundcard (no fw)
> >
> > i followed this howto :
> > http://alsa.opensrc.org/Tascam_US-122
> >
> > no luck 'til now. somebody may help ?
> > logs following
> >
> > cheers
> > soifran
> >
> >
> > $ lsusb
> > Bus 004 Device 001: ID 0000:0000
> > Bus 001 Device 004: ID 1604:8007 Tascam US-122 Audio/Midi Interface
> > Bus 001 Device 001: ID 0000:0000
> > Bus 003 Device 001: ID 0000:0000
> > Bus 002 Device 001: ID 0000:0000
> >
> > $ lspci
> > 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV
> > Processor to I/O Controller (rev 02)
> > 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV
> > Processor to I/O Controller (rev 02)
> > 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV
> > Processor to I/O Controller (rev 02)
> > 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM
> > Integrated Graphics Device (rev 02)
> > 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated
> > Graphics Device (rev 02)
> > 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
> > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
> > 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
> > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
> > 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
> > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
> > 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
> > EHCI Controller (rev 03)
> > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
> > 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface
> > Bridge (rev 03)
> > 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
> > Controller (rev 03)
> > 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
> > SMBus Controller (rev 03)
> > 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
> > (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
> > 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
> > AC'97 Modem Controller (rev 03)
> > 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> > RTL-8139/8139C/8139C+ (rev 10)
> > 02:06.0 Network controller: Intel Corporation PRO/Wireless 2200BG
> > Network Connection (rev 05)
> > 02:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus
> > Controller
> > 02:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394
> > Host Controller
> > 02:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated
> > FlashMedia Controller
> > 02:09.4 Generic system peripheral [0805]: Texas Instruments
> > PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
> >
> >
> > $ dmesg
> > [ 0.000000] Linux version 2.6.20-15-lowlatency (root at palmer) (gcc
> > version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP PREEMPT Sun Apr 15
> > 07:39:03 UTC 2007 (Ubuntu Unofficial)
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] sanitize start
> > [ 0.000000] sanitize end
> > [ 0.000000] copy_e820_map() start: 0000000000000000 size:
> > 000000000009f800 end: 000000000009f800 type: 1
> > [ 0.000000] copy_e820_map() type is E820_RAM
> > [ 0.000000] copy_e820_map() start: 000000000009f800 size:
> > 0000000000000800 end: 00000000000a0000 type: 2
> > [ 0.000000] copy_e820_map() start: 00000000000ce000 size:
> > 0000000000002000 end: 00000000000d0000 type: 2
> > [ 0.000000] copy_e820_map() start: 00000000000dc000 size:
> > 0000000000024000 end: 0000000000100000 type: 2
> > [ 0.000000] copy_e820_map() start: 0000000000100000 size:
> > 000000004dde0000 end: 000000004dee0000 type: 1
> > [ 0.000000] copy_e820_map() type is E820_RAM
> > [ 0.000000] copy_e820_map() start: 000000004dee0000 size:
> > 000000000000c000 end: 000000004deec000 type: 3
> > [ 0.000000] copy_e820_map() start: 000000004deec000 size:
> > 0000000000014000 end: 000000004df00000 type: 4
> > [ 0.000000] copy_e820_map() start: 000000004df00000 size:
> > 0000000002100000 end: 0000000050000000 type: 2
> > [ 0.000000] copy_e820_map() start: 00000000fec00000 size:
> > 0000000000010000 end: 00000000fec10000 type: 2
> > [ 0.000000] copy_e820_map() start: 00000000fee00000 size:
> > 0000000000001000 end: 00000000fee01000 type: 2
> > [ 0.000000] copy_e820_map() start: 00000000ff800000 size:
> > 0000000000400000 end: 00000000ffc00000 type: 2
> > [ 0.000000] copy_e820_map() start: 00000000fffffc00 size:
> > 0000000000000400 end: 0000000100000000 type: 2
> > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> > [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000
> > (reserved)
> > [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000
> > (reserved)
> > [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000
> > (reserved)
> > [ 0.000000] BIOS-e820: 0000000000100000 - 000000004dee0000 (usable)
> > [ 0.000000] BIOS-e820: 000000004dee0000 - 000000004deec000 (ACPI
> > data)
> > [ 0.000000] BIOS-e820: 000000004deec000 - 000000004df00000 (ACPI
> > NVS)
> > [ 0.000000] BIOS-e820: 000000004df00000 - 0000000050000000
> > (reserved)
> > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000
> > (reserved)
> > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
> > (reserved)
> > [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000
> > (reserved)
> > [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000
> > (reserved)
> > [ 0.000000] 350MB HIGHMEM available.
> > [ 0.000000] 896MB LOWMEM available.
> > [ 0.000000] found SMP MP-table at 000f7e30
> > [ 0.000000] Entering add_active_range(0, 0, 319200) 0 entries of 256
> > used
> > [ 0.000000] Zone PFN ranges:
> > [ 0.000000] DMA 0 -> 4096
> > [ 0.000000] Normal 4096 -> 229376
> > [ 0.000000] HighMem 229376 -> 319200
> > [ 0.000000] early_node_map[1] active PFN ranges
> > [ 0.000000] 0: 0 -> 319200
> > [ 0.000000] On node 0 totalpages: 319200
> > [ 0.000000] DMA zone: 32 pages used for memmap
> > [ 0.000000] DMA zone: 0 pages reserved
> > [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> > [ 0.000000] Normal zone: 1760 pages used for memmap
> > [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
> > [ 0.000000] HighMem zone: 701 pages used for memmap
> > [ 0.000000] HighMem zone: 89123 pages, LIFO batch:15
> > [ 0.000000] DMI present.
> > [ 0.000000] ACPI: RSDP (v000 HP )
> > @ 0x000f7e00
> > [ 0.000000] ACPI: RSDT (v001 HP 09B8 0x06040000 LTP
> > 0x00000000) @ 0x4dee76bb
> > [ 0.000000] ACPI: FADT (v001 HP 09B8 0x06040000 PTL
> > 0x00000050) @ 0x4deebe8c
> > [ 0.000000] ACPI: HPET (v001 HP 09B8 0x06040000 PTL
> > 0x00000000) @ 0x4deebf00
> > [ 0.000000] ACPI: MADT (v001 HP 09B8 0x06040000 PTL
> > 0x00000050) @ 0x4deebf38
> > [ 0.000000] ACPI: MADT (v001 HP 09B8 0x06040000 PTL
> > 0x00000000) @ 0x4deebf92
> > [ 0.000000] ACPI: BOOT (v001 HP 09B8 0x06040000 LTP
> > 0x00000001) @ 0x4deebfd8
> > [ 0.000000] ACPI: SSDT (v001 HP 09B8 0x00000001 INTL
> > 0x20030224) @ 0x4dee7afe
> > [ 0.000000] ACPI: SSDT (v001 HP 09B8 0x00002000 INTL
> > 0x20030224) @ 0x4dee76fb
> > [ 0.000000] ACPI: DSDT (v001 HP 09B8 0x06040000 MSFT
> > 0x0100000e) @ 0x00000000
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] ACPI: 2 duplicate APIC table ignored.
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > [ 0.000000] Processor #0 6:13 APIC version 20
> > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
> > 0-23
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> > level)
> > [ 0.000000] ACPI: IRQ0 used by override.
> > [ 0.000000] ACPI: IRQ2 used by override.
> > [ 0.000000] ACPI: IRQ9 used by override.
> > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] Allocating PCI resources starting at 60000000 (gap:
> > 50000000:aec00000)
> > [ 0.000000] Detected 1596.033 MHz processor.
> > [ 7.610021] Built 1 zonelists. Total pages: 316707
> > [ 7.610026] Kernel command line:
> > root=UUID=70a8d5e0-83ad-4a53-8cce-199d6e447bd7 ro quiet splash
> > [ 7.610206] mapped APIC to ffffd000 (fee00000)
> > [ 7.610209] mapped IOAPIC to ffffc000 (fec00000)
> > [ 7.610213] Enabling fast FPU save and restore... done.
> > [ 7.610217] Enabling unmasked SIMD FPU exception support... done.
> > [ 7.610227] Initializing CPU#0
> > [ 7.610304] PID hash table entries: 4096 (order: 12, 16384 bytes)
> > [ 7.611930] Console: colour VGA+ 80x25
> > [ 7.612392] Dentry cache hash table entries: 131072 (order: 7, 524288
> > bytes)
> > [ 7.612910] Inode-cache hash table entries: 65536 (order: 6, 262144
> > bytes)
> > [ 7.671933] Memory: 1254492k/1276800k available (2018k kernel code,
> > 21432k reserved, 898k data, 328k init, 359296k highmem)
> > [ 7.671946] virtual kernel memory layout:
> > [ 7.671947] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
> > [ 7.671949] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> > [ 7.671950] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> > [ 7.671952] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> > [ 7.671953] .init : 0xc03df000 - 0xc0431000 ( 328 kB)
> > [ 7.671954] .data : 0xc02f8b15 - 0xc03d96d4 ( 898 kB)
> > [ 7.671956] .text : 0xc0100000 - 0xc02f8b15 (2018 kB)
> > [ 7.671960] Checking if this processor honours the WP bit even in
> > supervisor mode... Ok.
> > [ 7.731176] Calibrating delay using timer specific routine.. 3193.10
> > BogoMIPS (lpj=1596552)
> > [ 7.731241] Security Framework v1.0.0 initialized
> > [ 7.731257] SELinux: Disabled at boot.
> > [ 7.731282] Mount-cache hash table entries: 512
> > [ 7.731519] CPU: After generic identify, caps: afe9fbbf 00000000
> > 00000000 00000000 00000180 00000000 00000000
> > [ 7.731536] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 7.731540] CPU: L2 cache: 2048K
> > [ 7.731544] CPU: After all inits, caps: afe9fbbf 00000000 00000000
> > 00002040 00000180 00000000 00000000
> > [ 7.731559] Compat vDSO mapped to ffffe000.
> > [ 7.731566] Remapping vsyscall page to ffffe000
> > [ 7.731583] Checking 'hlt' instruction... OK.
> > [ 7.735368] SMP alternatives: switching to UP code
> > [ 7.735693] Freeing SMP alternatives: 9k freed
> > [ 7.735902] Early unpacking initramfs... done
> > [ 8.086015] ACPI: Core revision 20060707
> > [ 8.086759] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not
> > found, using machine DSDT.
> > [ 8.170046] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
> > [ 8.170072] Total of 1 processors activated (3193.10 BogoMIPS).
> > [ 8.170207] ENABLING IO-APIC IRQs
> > [ 8.170390] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> > [ 8.281618] Brought up 1 CPUs
> > [ 8.281905] Booting paravirtualized kernel on bare hardware
> > [ 8.281976] Time: 10:45:46 Date: 04/12/107
> > [ 8.282011] NET: Registered protocol family 16
> > [ 8.282105] EISA bus registered
> > [ 8.282111] ACPI: bus type pci registered
> > [ 8.283380] PCI: PCI BIOS revision 2.10 entry at 0xfd9c2, last bus=2
> > [ 8.283383] PCI: Using configuration type 1
> > [ 8.283385] Setting up standard PCI resources
> > [ 8.301564] ACPI: Interpreter enabled
> > [ 8.301567] ACPI: Using IOAPIC for interrupt routing
> > [ 8.302184] ACPI: PCI Root Bridge [PCI0] (0000:00)
> > [ 8.302191] PCI: Probing PCI hardware (bus 00)
> > [ 8.303128] Boot video device is 0000:00:02.0
> > [ 8.303435] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
> > [ 8.303439] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
> > [ 8.303935] PCI: Transparent bridge - 0000:00:1e.0
> > [ 8.303988] PCI: Bus #03 (-#06) is hidden behind transparent bridge
> > #02 (-#02) (try 'pci=assign-busses')
> > [ 8.303991] Please report the result to linux-kernel to fix this
> > permanently
> > [ 8.304007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > [ 8.308912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> > [ 8.309578] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
> > [ 8.309836] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
> > [ 8.310091] ACPI: PCI Interrupt Link [LNKC] (IRQs *4)
> > [ 8.310347] ACPI: PCI Interrupt Link [LNKD] (IRQs *3)
> > [ 8.310616] ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
> > [ 8.310868] ACPI: PCI Interrupt Link [LNKF] (IRQs 3) *0, disabled.
> > [ 8.311123] ACPI: PCI Interrupt Link [LNKG] (IRQs *4)
> > [ 8.311376] ACPI: PCI Interrupt Link [LNKH] (IRQs *3)
> > [ 8.316385] Linux Plug and Play Support v0.97 (c) Adam Belay
> > [ 8.316395] pnp: PnP ACPI init
> > [ 8.318623] pnp: PnP ACPI: found 7 devices
> > [ 8.318627] PnPBIOS: Disabled by ACPI PNP
> > [ 8.318674] PCI: Using ACPI for IRQ routing
> > [ 8.318677] PCI: If a device doesn't work, try "pci=routeirq". If it
> > helps, post a report
> > [ 8.324630] NET: Registered protocol family 8
> > [ 8.324632] NET: Registered protocol family 20
> > [ 8.324980] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
> > [ 8.324995] PCI: Bus 3, cardbus bridge: 0000:02:09.0
> > [ 8.324998] IO window: 00003400-000034ff
> > [ 8.325002] IO window: 00003800-000038ff
> > [ 8.325007] PREFETCH window: 60000000-63ffffff
> > [ 8.325011] MEM window: 68000000-6bffffff
> > [ 8.325015] PCI: Bridge: 0000:00:1e.0
> > [ 8.325018] IO window: 3000-3fff
> > [ 8.325023] MEM window: e0200000-e02fffff
> > [ 8.325028] PREFETCH window: 60000000-63ffffff
> > [ 8.325041] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> > [ 8.325057] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level,
> > low) -> IRQ 16
> > [ 8.325087] NET: Registered protocol family 2
> > [ 8.334574] IP route cache hash table entries: 32768 (order: 5,
> > 131072 bytes)
> > [ 8.334705] TCP established hash table entries: 131072 (order: 8,
> > 1572864 bytes)
> > [ 8.336346] TCP bind hash table entries: 65536 (order: 7, 786432
> > bytes)
> > [ 8.337754] TCP: Hash tables configured (established 131072 bind
> > 65536)
> > [ 8.337758] TCP reno registered
> > [ 8.340706] checking if image is initramfs... it is
> > [ 9.024399] Freeing initrd memory: 6907k freed
> > [ 9.024742] Simple Boot Flag at 0x36 set to 0x1
> > [ 9.025060] audit: initializing netlink socket (disabled)
> > [ 9.025082] audit(1178966746.529:1): initialized
> > [ 9.025187] highmem bounce pool size: 64 pages
> > [ 9.025275] VFS: Disk quotas dquot_6.5.1
> > [ 9.025306] Dquot-cache hash table entries: 1024 (order 0, 4096
> > bytes)
> > [ 9.025382] io scheduler noop registered
> > [ 9.025386] io scheduler anticipatory registered
> > [ 9.025389] io scheduler deadline registered
> > [ 9.025404] io scheduler cfq registered (default)
> > [ 9.025834] isapnp: Scanning for PnP cards...
> > [ 9.382018] isapnp: No Plug & Play device found
> > [ 9.405235] Real Time Clock Driver v1.12ac
> > [ 9.405302] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> > sharing enabled
> > [ 9.405932] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level,
> > low) -> IRQ 17
> > [ 9.405942] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
> > [ 9.406019] mice: PS/2 mouse device common for all mice
> > [ 9.406653] RAMDISK driver initialized: 16 RAM disks of 65536K size
> > 1024 blocksize
> > [ 9.406869] input: Macintosh mouse button emulation
> > as /class/input/input0
> > [ 9.406905] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > [ 9.406910] ide: Assuming 33MHz system bus speed for PIO modes;
> > override with idebus=xx
> > [ 9.407135] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at
> > 0x60,0x64 irq 1,12
> > [ 9.408771] serio: i8042 KBD port at 0x60,0x64 irq 1
> > [ 9.408826] serio: i8042 AUX port at 0x60,0x64 irq 12
> > [ 9.408899] EISA: Probing bus 0 at eisa.0
> > [ 9.408908] Cannot allocate resource for EISA slot 1
> > [ 9.408912] Cannot allocate resource for EISA slot 2
> > [ 9.408915] Cannot allocate resource for EISA slot 3
> > [ 9.408936] EISA: Detected 0 cards.
> > [ 9.438652] input: AT Translated Set 2 keyboard
> > as /class/input/input1
> > [ 9.439037] TCP cubic registered
> > [ 9.439050] NET: Registered protocol family 1
> > [ 9.439078] Using IPI No-Shortcut mode
> > [ 9.439143] ACPI: (supports S0 S3 S4 S5)
> > [ 9.439192] Magic number: 7:190:780
> > [ 9.439290] hash matches device ptyq2
> > [ 9.439307] Time: tsc clocksource has been installed.
> > [ 9.439551] Freeing unused kernel memory: 328k freed
> > [ 10.654198] Capability LSM initialized
> > [ 10.689878] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> > [ 10.692351] ACPI: Thermal Zone [THRM] (67 C)
> > [ 11.102745] usbcore: registered new interface driver usbfs
> > [ 11.102774] usbcore: registered new interface driver hub
> > [ 11.102797] usbcore: registered new device driver usb
> > [ 11.103684] USB Universal Host Controller Interface driver v3.0
> > [ 11.103748] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level,
> > low) -> IRQ 18
> > [ 11.103761] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> > [ 11.103765] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> > [ 11.103909] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
> > bus number 1
> > [ 11.103935] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820
> > [ 11.104045] usb usb1: configuration #1 chosen from 1 choice
> > [ 11.104068] hub 1-0:1.0: USB hub found
> > [ 11.104075] hub 1-0:1.0: 2 ports detected
> > [ 11.170739] SCSI subsystem initialized
> > [ 11.176234] libata version 2.20 loaded.
> > [ 11.204535] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
> > low) -> IRQ 19
> > [ 11.204550] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> > [ 11.204554] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> > [ 11.204580] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
> > bus number 2
> > [ 11.204607] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
> > [ 11.204709] usb usb2: configuration #1 chosen from 1 choice
> > [ 11.204733] hub 2-0:1.0: USB hub found
> > [ 11.204740] hub 2-0:1.0: 2 ports detected
> > [ 11.288350] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> > [ 11.305025] ieee1394: Initialized config rom entry `ip1394'
> > [ 11.305394] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
> > low) -> IRQ 20
> > [ 11.305407] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> > [ 11.305412] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> > [ 11.305440] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
> > bus number 3
> > [ 11.305467] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
> > [ 11.305568] usb usb3: configuration #1 chosen from 1 choice
> > [ 11.305594] hub 3-0:1.0: USB hub found
> > [ 11.305602] hub 3-0:1.0: 2 ports detected
> > [ 3.571000] Time: acpi_pm clocksource has been installed.
> > [ 3.618000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level,
> > low) -> IRQ 21
> > [ 3.618000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> > [ 3.618000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> > [ 3.618000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
> > bus number 4
> > [ 3.618000] ehci_hcd 0000:00:1d.7: debug port 1
> > [ 3.618000] PCI: cache line size of 32 is not supported by device
> > 0000:00:1d.7
> > [ 3.618000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xe0100000
> > [ 3.622000] usb 1-2: new full speed USB device using uhci_hcd and
> > address 2
> > [ 3.622000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
> > 10 Dec 2004
> > [ 3.623000] usb usb4: configuration #1 chosen from 1 choice
> > [ 3.623000] hub 4-0:1.0: USB hub found
> > [ 3.623000] hub 4-0:1.0: 6 ports detected
> > [ 3.726000] ata_piix 0000:00:1f.1: version 2.10ac1
> > [ 3.726000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
> > [ 3.726000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
> > low) -> IRQ 20
> > [ 3.726000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> > [ 3.726000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6
> > bmdma 0x00011810 irq 14
> > [ 3.726000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376
> > bmdma 0x00011818 irq 15
> > [ 3.726000] scsi0 : ata_piix
> > [ 3.880000] ata1.00: ata_hpa_resize 1: sectors = 195371568,
> > hpa_sectors = 195371568
> > [ 3.880000] ata1.00: ATA-6: FUJITSU MHU2100AT, 00000008, max UDMA/100
> > [ 3.880000] ata1.00: 195371568 sectors, multi 16: LBA
> > [ 3.885000] ata1.00: ata_hpa_resize 1: sectors = 195371568,
> > hpa_sectors = 195371568
> > [ 3.885000] ata1.00: configured for UDMA/100
> > [ 3.885000] scsi1 : ata_piix
> > [ 4.122000] usb 1-2: new full speed USB device using uhci_hcd and
> > address 3
> > [ 4.225000] ata2.00: ATAPI, max MWDMA2
> > [ 4.257000] usb 1-2: configuration #1 chosen from 1 choice
> > [ 4.395000] ata2.00: configured for MWDMA2
> > [ 4.395000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHU2100A
> > 0000 PQ: 0 ANSI: 5
> > [ 4.399000] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L532R
> > HA04 PQ: 0 ANSI: 5
> > [ 4.400000] 8139cp 0000:02:00.0: This (id 10ec:8139 rev 10) is not an
> > 8139C+ compatible chip
> > [ 4.400000] 8139cp 0000:02:00.0: Try the "8139too" driver instead.
> > [ 4.402000] 8139too Fast Ethernet driver 0.9.28
> > [ 4.402000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level,
> > low) -> IRQ 18
> > [ 4.402000] eth0: RealTek RTL8139 at 0xf88b6800, 00:c0:9f:95:94:2d,
> > IRQ 18
> > [ 4.402000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
> > [ 4.402000] ACPI: PCI Interrupt 0000:02:09.2[C] -> GSI 22 (level,
> > low) -> IRQ 22
> > [ 4.453000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]
> > MMIO=[e0207000-e02077ff] Max Packet=[2048] IR/IT contexts=[4/8]
> > [ 4.466000] SCSI device sda: 195371568 512-byte hdwr sectors (100030
> > MB)
> > [ 4.466000] sda: Write Protect is off
> > [ 4.466000] sda: Mode Sense: 00 3a 00 00
> > [ 4.466000] SCSI device sda: write cache: enabled, read cache:
> > enabled, doesn't support DPO or FUA
> > [ 4.466000] SCSI device sda: 195371568 512-byte hdwr sectors (100030
> > MB)
> > [ 4.466000] sda: Write Protect is off
> > [ 4.466000] sda: Mode Sense: 00 3a 00 00
> > [ 4.466000] SCSI device sda: write cache: enabled, read cache:
> > enabled, doesn't support DPO or FUA
> > [ 4.466000] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
> > [ 4.546000] sd 0:0:0:0: Attached scsi disk sda
> > [ 4.551000] sd 0:0:0:0: Attached scsi generic sg0 type 0
> > [ 4.551000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
> > [ 4.597000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda
> > tray
> > [ 4.597000] Uniform CD-ROM driver Revision: 3.20
> > [ 4.597000] sr 1:0:0:0: Attached scsi CD-ROM sr0
> > [ 4.882000] Attempting manual resume
> > [ 4.882000] swsusp: Resume From Partition 8:5
> > [ 4.882000] PM: Checking swsusp image.
> > [ 4.882000] PM: Resume from disk failed.
> > [ 4.923000] kjournald starting. Commit interval 5 seconds
> > [ 4.923000] EXT3-fs: mounted filesystem with ordered data mode.
> > [ 17.537000] eth0: link down
> > [ 18.935000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> > [ 18.940000] shpchp: Standard Hot Plug PCI Controller Driver version:
> > 0.4
> > [ 19.234000] Linux agpgart interface v0.102 (c) Dave Jones
> > [ 19.236000] NET: Registered protocol family 17
> > [ 19.258000] iTCO_vendor_support: vendor-support=0
> > [ 19.259000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01
> > (11-Nov-2006)
> > [ 19.260000] iTCO_wdt: Found a ICH4-M TCO device (Version=1,
> > TCOBASE=0x1060)
> > [ 19.260000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> > [ 19.275000] intel_rng: FWH not detected
> > [ 19.415000] usb 1-2: USB disconnect, address 3
> > [ 19.794000] Yenta: CardBus bridge found at 0000:02:09.0 [103c:3080]
> > [ 19.794000] Yenta: Enabling burst memory read transactions
> > [ 19.794000] Yenta: Using CSCINT to route CSC interrupts to PCI
> > [ 19.794000] Yenta: Routing CardBus interrupts to PCI
> > [ 19.794000] Yenta TI: socket 0000:02:09.0, mfunc 0x01a01b22, devctl
> > 0x64
> > [ 19.845000] agpgart: Detected an Intel 855 Chipset.
> > [ 19.846000] agpgart: Detected 32636K stolen memory.
> > [ 19.853000] agpgart: AGP aperture is 128M @ 0xe8000000
> > [ 19.897000] sdhci: Secure Digital Host Controller Interface driver
> > [ 19.897000] sdhci: Copyright(c) Pierre Ossman
> > [ 19.991000] ieee80211_crypt: registered algorithm 'NULL'
> > [ 19.993000] ieee80211: 802.11 data/management/control stack,
> > git-1.1.13
> > [ 19.993000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
> > <jketreno at linux.intel.com>
> > [ 20.016000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver,
> > 1.2.0kmprq
> > [ 20.016000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
> > [ 20.017000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
> > [ 20.017000] Socket status: 30000006
> > [ 20.017000] Yenta: Raising subordinate bus# of parent bus (#02) from
> > #02 to #06
> > [ 20.017000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
> > [ 20.017000] cs: IO port probe 0x3000-0x3fff: clean.
> > [ 20.018000] pcmcia: parent PCI bridge Memory window: 0xe0200000 -
> > 0xe02fffff
> > [ 20.018000] pcmcia: parent PCI bridge Memory window: 0x60000000 -
> > 0x63ffffff
> > [ 20.024000] ACPI: PCI Interrupt 0000:02:09.3[A] -> GSI 20 (level,
> > low) -> IRQ 16
> > [ 20.049000] sdhci: SDHCI controller found at 0000:02:09.4 [104c:8034]
> > (rev 0)
> > [ 20.049000] ACPI: PCI Interrupt 0000:02:09.4[A] -> GSI 20 (level,
> > low) -> IRQ 16
> > [ 20.049000] mmc0: SDHCI at 0xe0208400 irq 16 DMA
> > [ 20.049000] mmc1: SDHCI at 0xe0208000 irq 16 DMA
> > [ 20.049000] mmc2: SDHCI at 0xe0207c00 irq 16 DMA
> > [ 20.050000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level,
> > low) -> IRQ 20
> > [ 20.050000] ipw2200: Detected Intel PRO/Wireless 2200BG Network
> > Connection
> > [ 20.234000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0
> > 802.11a channels)
> > [ 20.303000] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1,
> > caps: 0xa04713/0x0
> > [ 20.337000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
> > [ 20.576000] cs: IO port probe 0x100-0x3af: clean.
> > [ 20.578000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
> > [ 20.578000] cs: IO port probe 0x820-0x8ff: clean.
> > [ 20.579000] cs: IO port probe 0xc00-0xcf7: clean.
> > [ 20.580000] cs: IO port probe 0xa00-0xaff: clean.
> > [ 20.624000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level,
> > low) -> IRQ 17
> > [ 20.624000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
> > [ 20.931000] intel8x0_measure_ac97_clock: measured 50099 usecs
> > [ 20.931000] intel8x0: clocking to 48000
> > [ 21.075000] usb 1-2: new full speed USB device using uhci_hcd and
> > address 4
> > [ 21.099000] lp: driver loaded but no devices found
> > [ 21.197000] fuse init (API version 7.8)
> > [ 21.209000] usb 1-2: configuration #1 chosen from 1 choice
> > [ 21.271000] Adding 2650684k swap
> > on /dev/disk/by-uuid/eb312c83-22d1-44ba-81e7-bbe2ab86c9ff. Priority:-1
> > extents:1 across:2650684k
> > [ 21.464000] usbcore: registered new interface driver snd-usb-usx2y
> > [ 21.524000] EXT3 FS on sda3, internal journal
> > [ 21.783000] kjournald starting. Commit interval 5 seconds
> > [ 21.784000] EXT3 FS on sda4, internal journal
> > [ 21.784000] EXT3-fs: mounted filesystem with ordered data mode.
> > [ 22.766000] ACPI: AC Adapter [ACAD] (off-line)
> > [ 22.782000] No dock devices found.
> > [ 22.795000] Using specific hotkey driver
> > [ 22.891000] ACPI: Battery Slot [BAT0] (battery present)
> > [ 22.950000] ACPI: Video Device [GFX0] (multi-head: yes rom: yes
> > post: no)
> > [ 22.999000] input: Power Button (FF) as /class/input/input3
> > [ 23.003000] ACPI: Power Button (FF) [PWRF]
> > [ 23.037000] input: Lid Switch as /class/input/input4
> > [ 23.041000] ACPI: Lid Switch [LID0]
> > [ 23.075000] input: Sleep Button (CM) as /class/input/input5
> > [ 23.079000] ACPI: Sleep Button (CM) [SLPB]
> > [ 23.118000] ibm_acpi: ec object not found
> > [ 23.172000] pcc_acpi: loading...
> > [ 27.964000] mtrr: no more MTRRs available
> > [ 27.964000] mtrr: no more MTRRs available
> > [ 27.964000] mtrr: no more MTRRs available
> > [ 27.964000] mtrr: no more MTRRs available
> > [ 28.868000] ppdev: user-space parallel port driver
> > [ 29.789000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> > [ 29.789000] apm: overridden by ACPI.
> > [ 29.998000] Bluetooth: Core ver 2.11
> > [ 29.998000] NET: Registered protocol family 31
> > [ 29.998000] Bluetooth: HCI device and connection manager initialized
> > [ 29.998000] Bluetooth: HCI socket layer initialized
> > [ 30.041000] Bluetooth: L2CAP ver 2.8
> > [ 30.041000] Bluetooth: L2CAP socket layer initialized
> > [ 30.134000] Bluetooth: RFCOMM socket layer initialized
> > [ 30.134000] Bluetooth: RFCOMM TTY layer initialized
> > [ 30.134000] Bluetooth: RFCOMM ver 1.8
> > [ 54.225000] NET: Registered protocol family 10
> > [ 54.225000] lo: Disabled Privacy Extensions
> > [ 54.225000] ADDRCONF(NETDEV_UP): eth0: link is not ready
> > [ 64.575000] eth1: no IPv6 routers present
> > [ 68.052000] ieee80211_crypt: registered algorithm 'WEP'
> > [ 82.809000] eth1: no IPv6 routers present
> >
> >
> >
> >
>
More information about the Ubuntu-Studio-users
mailing list