blanco pagina's met Brother HL-1110, en geen driver ?

[jrlmailing]

Op 17-07-16 om 01:23 schreef jrlmailing:
> Hallo beste listers,
>
> de cups conf voor mijn laserprinter, een Brother Hl-1110, is klaar maar er
> komen enkel blanco pagina's uit;
> er zijn brother-cups-wrapper-laser en ...-laser1 packages, idem voor de
> ...lpr-wrapper... packages, maar ik vind er geen model HL-1110 in vermeldt;
>
> welke extra's wordt ik dan verondersteld te installeren ?

Nog maar eens opnieuw, vorige is minder duidelijk, sorry dit is duidelijker


  Driver Install Tool


http://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.0.0-1.gz


    How to Install

Step1. Download the tool.(linux-brprinter-installer-*.*.*-*.gz)

The tool will be downloaded into the default "Download" directory.
(The directory location varies depending on your Linux distribution.)
e.g. /home/(LoginName)/Download

Step2. Open a terminal window and go to the directory you downloaded the 
file to in the last step.

Step3. Enter this command to extract the downloaded file:

*Command: gunzip linux-brprinter-installer-*.*.*-*.gz*

Step4. Get superuser authorization with the "*su*" command or "*sudo 
su*" command.

Step5. Run the tool:

*Command: bash linux-brprinter-installer-*.*.*-* Brother machine name*

Step6. The driver installation will start. Follow the installation 
screen directions.

  When you see the message "Will you specify the DeviceURI ?",

  For USB Users: Choose N(No)
  For Network Users: Choose Y(Yes) and DeviceURI.

The install process may take some time. Please wait until it is complete.


  LPR printer driver (deb package)

http://download.brother.com/welcome/dlf100419/hl1110lpr-3.0.1-1.i386.deb


    How to Install

 1. Download LPR driver.
 2. Login as a superuser ( or use "sudo" option if required).
 3. Check if pre-required procedures are completed
    *For Debian/Ubuntu 64bit*
    <http://support.brother.com/g/s/id/linux/en/before.html#004>
 4. Install the driver.
     1. Turn on the printer and connect the usb, network or parallel cable.
     2. Go to the directory where the driver is.
     3. Install LPR driver.The install process may take some time.
        Please wait until it is complete.
        *Command  :  dpkg -i --force-all  (lpr-drivername)*
     4. Check if the LPR driver is installed.
        *Command  :  dpkg -l |  grep  Brother*
 5. Confirm/Configure a file according to your connection.
     1. Check the configuration filename for your distribution.
        *Example:
        openSUSE, Ubuntu, Debian : /etc/printcap
        Redhat, fedora, Mandriva : /etc/printcap.local*
     2. Edit the file according to your connection.
        _*For USB Connection (Default)*_
        Check if the parameter of ":lp" is ":lp=/dev/usb/lp0"
        _*For Network Connection*_
        replace ":lp" line to the following 2 lines
        :rm=(ip address of your printer)\
        :rp=lp\
        _*For Parallel Connection*_
        replace ":lp" line to the following line
        :lp=/dev/lp0\
     3. Restart the print system.
        *Command  (for  lpr):  /etc/init.d/lpr  restart
        Command  (for  lprng)  :  /etc/init.d/lprng  restart*
 6. Try a test print.


-- 
Jrl

Linux Registered User # 463601
Ubuntu gemakkelijk mooi & betrouwbaar

------------- volgend deel ------------
Een HTML-bijlage is gescrubt...
URL: <https://lists.ubuntu.com/archives/ubuntu-nl/attachments/20160717/3ff887f6/attachment.html>