blanco pagina's met Brother HL-1110, en geen driver ?

[jrlmailing]

Op 16-07-16 om 21:07 schreef Y P:
> Hallo beste listers,
>
> de cups conf voor mijn laserprinter, een Brother Hl-1110, is klaar maar er
> komen enkel blanco pagina's uit;
> er zijn brother-cups-wrapper-laser en ...-laser1 packages, idem voor de
> ...lpr-wrapper... packages, maar ik vind er geen model HL-1110 in vermeldt;
>
> welke extra's wordt ik dan verondersteld te installeren ?

Op 
http://support.brother.com/g/b/downloadlist.aspx?c=eu_ot&lang=en&prod=hl1110_us_eu_as&os=128
Kan je de deb vinden.
The tool will install LPR, CUPSwrapper driver and scanner driver (for 
scanner models).
http://support.brother.com/g/b/downloadhowto.aspx?c=eu_ot&lang=en&prod=hl1110_us_eu_as&os=128&dlid=dlf006893_000&flang=4&type3=625


  LPR printer driver (deb package)

http://download.brother.com/welcome/dlf100419/hl1110lpr-3.0.1-1.i386.deb


    How to Install

 1. Download LPR driver.
 2. Login as a superuser ( or use "sudo" option if required).
 3. Check if pre-required procedures are completed
    *For Debian/Ubuntu 64bit*
    <http://support.brother.com/g/s/id/linux/en/before.html#004>
 4. Install the driver.
     1. Turn on the printer and connect the usb, network or parallel cable.
     2. Go to the directory where the driver is.
     3. Install LPR driver.The install process may take some time.
        Please wait until it is complete.
        *Command  :  dpkg -i --force-all  (lpr-drivername)*
     4. Check if the LPR driver is installed.
        *Command  :  dpkg -l |  grep  Brother*
 5. Confirm/Configure a file according to your connection.
     1. Check the configuration filename for your distribution.
        *Example:
        openSUSE, Ubuntu, Debian : /etc/printcap
        Redhat, fedora, Mandriva : /etc/printcap.local*
     2. Edit the file according to your connection.
        _*For USB Connection (Default)*_
        Check if the parameter of ":lp" is ":lp=/dev/usb/lp0"
        _*For Network Connection*_
        replace ":lp" line to the following 2 lines
        :rm=(ip address of your printer)\
        :rp=lp\
        _*For Parallel Connection*_
        replace ":lp" line to the following line
        :lp=/dev/lp0\
     3. Restart the print system.
        *Command  (for  lpr):  /etc/init.d/lpr  restart
        Command  (for  lprng)  :  /etc/init.d/lprng  restart*
 6. Try a test print.



> Ooit had ik de tgz van deze 2 packages, uit te pakken en Klaar Was Kees!
> maar voor komende updates zou ik het ook graag via officiële packages willen
> doen, dus ... alle goede tips welkom!
>
> MVG,
>
> Y P
>   
>
>


-- 
Jrl

Linux Registered User # 463601
Ubuntu gemakkelijk mooi & betrouwbaar

------------- volgend deel ------------
Een HTML-bijlage is gescrubt...
URL: <https://lists.ubuntu.com/archives/ubuntu-nl/attachments/20160717/8783c04f/attachment.html>