In grub browservoorrang wijzigen

Ma Sep 17 13:11:54 UTC 2007

Dag,

Graag wil ik de opstartvoorrang wijzigen. Op diverse plaatsen staat
aangegeven dat ik het volgende commando moet opgeven; "gksudo gedit
/boot/grub/menu.lst"
Dan opent gedit. Echter de verandering van prioriteit wordt niet
geaccepteerd.
Onderstaand is de waarschuwing waardoor dit veroorzaakt wordt.

coos op coubuntu:~$ gksudo gedit /boot/grub/menu.lst
(gedit:7330): GnomeUI-WARNING **: While connecting to session manager:
Authentication Rejected, reason : None of the authentication protocols
specified are supported and host-based authentication failed.

Wat zit er fout in mijn grub?

Hier is de volledige list;

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default 0
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default
entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or
your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default
entry
# (normally the first entry defined).
timeout		20

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive
editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=feaa9393-2259-4b58-a069-04a801530106 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,6)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title		Ubuntu, kernel 2.6.20-16-generic
root		(hd0,6)
kernel		/boot/vmlinuz-2.6.20-16-generic
root=UUID=feaa9393-2259-4b58-a069-04a801530106 ro quiet splash
initrd		/boot/initrd.img-2.6.20-16-generic
quiet
savedefault

title		Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root		(hd0,6)
kernel		/boot/vmlinuz-2.6.20-16-generic
root=UUID=feaa9393-2259-4b58-a069-04a801530106 ro single
initrd		/boot/initrd.img-2.6.20-16-generic

title		Ubuntu, kernel 2.6.20-15-generic
root		(hd0,6)
kernel		/boot/vmlinuz-2.6.20-15-generic
root=UUID=feaa9393-2259-4b58-a069-04a801530106 ro quiet splash
initrd		/boot/initrd.img-2.6.20-15-generic
quiet
savedefault

title		Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root		(hd0,6)
kernel		/boot/vmlinuz-2.6.20-15-generic
root=UUID=feaa9393-2259-4b58-a069-04a801530106 ro single
initrd		/boot/initrd.img-2.6.20-15-generic

title		Ubuntu, memtest86+
root		(hd0,6)
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title		Other operating systems:
root

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title		Microsoft Windows XP Home Edition
root		(hd0,0)
savedefault
makeactive
chainloader	+1

Vreemd dat hd0.7 niet genoteerd staat! Hierin zit de ubuntu browser die ik
als default wil laten opstarten. hd0.6 is de kubuntu browser waarin
linuxmce staat, binnengehaald omdat ik Ubuntu mijn tv niet aan de praat
krijgt. In Kubuntu trouwens ook niet! Oo vreemd, omdat in het opstatrmenu
wel gekozen kan worden om hd0.7, ubuntu te openen!