[ubuntu-in] Edgy too slow on new computer
Aniruddha Shankar
karim at sarai.net
Mon Jan 15 12:57:18 GMT 2007
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Aniruddha Shankar wrote:
> Usha wrote:
>> Hi,
>> I am not very familiar with gnu/linux. But, I used to run an earlier
>> version of ubuntu and i was happy with it.
>
>> Recenlty, I bought a new computer (SATA hard disk, AMD-64 bit, My main
>> board is ASUS A8-VM).
>
>> On this system I installed the new ubuntu edgy (32 bit). I had no
>> problems during the installation. But now, everything is really slow
>> and it takes minutes to scroll up a page. Assuming the problem could
>> be with GNOME, I tried running KDE and found that it was still slow.
>
>> Please Help!
>> Thanks!!
>
> I recommend that you do *not* use the 64bit version of Edgy if you want
> to view things like webpages with flash - the last time I tried to do
> so, I ran into several problems. In any case, the system you mention
> should not be slow at all as I have an AMD64 based system with PATA hard
> drives that is not slow at all.
>
> My guess would be:
>
> a) the SATA hard drives are not being recognised properly or DMA on them
> is not enabled.
> b) there is some other low-level hardware configuration error.
>
>
> to find out what the problems is, you should report the following
> information to us. All commands should be run from the console.
>
> 1. Information about your hardware:
>
> $ sudo lspci -v
>
> 2. Information about how Ubuntu has recognised your hardware:
>
> $ sudo dmesg
>
> 3. Information about your CPU
>
> $ sudo cat /proc/cpuinfo
>
> 4. Information about your hard disk
>
> $ sudo apt-get install smartmontools
> $ sudo smartctl -a /dev/sda (replace sda with the name of your hard
> disk, if appropriate)
>
> 5. Information about how your disk is partitioned
>
> $ sudo fdisk -l
>
> 6. Information about your BIOS
>
> $ sudo dmidecode
>
> cheers,
>
> Aniruddha Shankar
Oh, and forgot this one:
7. information about whether DMA is activated on your hard disk
$ sudo hdparm -i /dev/hda
$ sudo hdparm /dev/hda
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.1 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFq3othJkrd6A3rSsRAub2AKC7pWuXnGChm4Kbya/WWSNhyzP78wCfQVjS
2Z40RqVpQD76oq/cQyRo4Ek=
=cPYJ
-----END PGP SIGNATURE-----
More information about the ubuntu-in
mailing list