Re: ΛΙΣΤΑ ΒΟΗΘΕΙΑ ΚΟΛΛΗΣΑ
g k
giormatsis at gmail.com
Thu Jul 10 13:39:44 BST 2008
το οποίο7.10 δεν καταφερε καν να ανοιξει το μηχανημα μαύρο παντού
Στις 10 Ιούλιος 2008 3:35 μμ,ο χρήστης g k <giormatsis at gmail.com> έγραψε:
> εχει μόνο μεχρι 7,10
>
> Στις 10 Ιούλιος 2008 3:08 μμ,ο χρήστης Tsabolov Sergey <econlab at uom.gr>
> έγραψε:
>
> Έχει και VIA drivers
>> http://www.viaarena.com/default.aspx?PageID=420&OSID=45&CatID=3220&SubCatID=150
>>
>> Να πω ότι δεν μου έτυχε να δοκιμάσω άλλα δεν νομίζω ότι θα είναι κάτι
>> τρομερό .
>>
>>
>> O/H g k έγραψε:
>>
>> lspci
>>
>>
>> chad at chad-laptop:~$ sudo lspci
>> [sudo] password for chad:
>> 00:00.0 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
>> 00:00.1 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
>> 00:00.2 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
>> 00:00.3 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
>> 00:00.4 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
>> 00:00.7 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
>> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
>> 00:06.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg
>> NIC (rev 01)
>> 00:09.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev
>> 01)
>> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>> Controller (rev 80)
>> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>> Controller (rev 80)
>> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>> Controller (rev 80)
>> 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
>> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
>> 00:11.1 IDE interface: VIA Technologies, Inc.
>> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
>> 00:11.5 Multimedia audio controller: VIA Technologies, Inc.
>> VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
>> 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem
>> Controller (rev 80)
>> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev
>> 74)
>> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro
>> VGA Adapter (rev 02)
>> chad at chad-laptop:~$
>>
>> dmesg
>>
>> 3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu
>> 2.6.24-19.34-generic)
>> [ 0.000000] BIOS-provided physical RAM map:
>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfef000 (usable)
>> [ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data)
>> [ 0.000000] BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS)
>> [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>> [ 0.000000] 0MB HIGHMEM available.
>> [ 0.000000] 447MB LOWMEM available.
>> [ 0.000000] Entering add_active_range(0, 0, 114671) 0 entries of 256
>> used
>> [ 0.000000] Zone PFN ranges:
>> [ 0.000000] DMA 0 -> 4096
>> [ 0.000000] Normal 4096 -> 114671
>> [ 0.000000] HighMem 114671 -> 114671
>> [ 0.000000] Movable zone start PFN for each node
>> [ 0.000000] early_node_map[1] active PFN ranges
>> [ 0.000000] 0: 0 -> 114671
>> [ 0.000000] On node 0 totalpages: 114671
>> [ 0.000000] DMA zone: 32 pages used for memmap
>> [ 0.000000] DMA zone: 0 pages reserved
>> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
>> [ 0.000000] Normal zone: 863 pages used for memmap
>> [ 0.000000] Normal zone: 109712 pages, LIFO batch:31
>> [ 0.000000] HighMem zone: 0 pages used for memmap
>> [ 0.000000] Movable zone: 0 pages used for memmap
>> [ 0.000000] DMI 2.3 present.
>> [ 0.000000] ACPI: RSDP signature @ 0xC00E6010 checksum 0
>> [ 0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00)
>> [ 0.000000] ACPI: RSDT 1BFFC3C0, 002C (r1 INSYDE FACP_000 100
>> 0000 10200)
>> [ 0.000000] ACPI: FACP 1BFFFB10, 0074 (r1 INSYDE FACP_000 100
>> 0000 10200)
>> [ 0.000000] ACPI: DSDT 1BFFC400, 3709 (r1 MTC___ 8650____ 1000
>> INTL 2002036)
>> [ 0.000000] ACPI: FACS 1BFFFFC0, 0040
>> [ 0.000000] ACPI: APIC 1BFFFBA0, 005A (r1 INSYDE APIC_000 30303030
>> 0000 10200)
>> [ 0.000000] ACPI: DMI detected: Fujitsu Siemens
>> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> [ 0.000000] Processor #0 6:13 APIC version 20
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI
>> 0-23
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> [ 0.000000] ACPI: IRQ0 used by override.
>> [ 0.000000] ACPI: IRQ2 used by override.
>> [ 0.000000] ACPI: IRQ9 used by override.
>> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> [ 0.000000] Allocating PCI resources starting at 20000000 (gap:
>> 1c000000:e3f80000)
>> [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
>> 00000000000a0000
>> [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
>> 00000000000e0000
>> [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 -
>> 0000000000100000
>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>> Total pages: 113776
>> [ 0.000000] Kernel command line:
>> root=UUID=2bdb6d6d-a154-465d-bffb-6b5da495133c ro quiet splash linux
>> resolution=1280x800 locale=el_GR
>> [ 0.000000] mapped APIC to ffffb000 (fee00000)
>> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
>> [ 0.000000] Enabling fast FPU save and restore... done.
>> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
>> [ 0.000000] Initializing CPU#0
>> [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
>> [ 0.000000] Detected 1492.671 MHz processor.
>> [ 9.736668] Console: colour VGA+ 80x25
>> [ 9.736675] console [tty0] enabled
>> [ 9.736923] Dentry cache hash table entries: 65536 (order: 6, 262144
>> bytes)
>> [ 9.737219] Inode-cache hash table entries: 32768 (order: 5, 131072
>> bytes)
>> [ 9.751699] Memory: 442628k/458684k available (2177k kernel code,
>> 15448k reserved, 1006k data, 368k init, 0k highmem)
>> [ 9.751710] virtual kernel memory layout:
>> [ 9.751711] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
>> [ 9.751712] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
>> [ 9.751714] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
>> [ 9.751715] lowmem : 0xc0000000 - 0xdbfef000 ( 447 MB)
>> [ 9.751717] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
>> [ 9.751718] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
>> [ 9.751720] .text : 0xc0100000 - 0xc0320434 (2177 kB)
>> [ 9.751724] Checking if this processor honours the WP bit even in
>> supervisor mode... Ok.
>> [ 9.751773] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
>> CPUs=1, Nodes=1
>> [ 9.831809] Calibrating delay using timer specific routine.. 2989.13
>> BogoMIPS (lpj=5978276)
>> [ 9.831843] Security Framework initialized
>> [ 9.831854] SELinux: Disabled at boot.
>> [ 9.831873] AppArmor: AppArmor initialized
>> [ 9.831879] Failure registering capabilities with primary security
>> module.
>> [ 9.831889] Mount-cache hash table entries: 512
>> [ 9.832051] Initializing cgroup subsys ns
>> [ 9.832059] Initializing cgroup subsys cpuacct
>> [ 9.832073] CPU: After generic identify, caps: afe9fbff 00000000
>> 00000000 00000000 00000000 00000000 00000000 00000000
>> [ 9.832087] CPU: L1 I cache: 32K, L1 D cache: 32K
>> [ 9.832090] CPU: L2 cache: 1024K
>> [ 9.832094] CPU: After all inits, caps: afe9fbff 00000000 00000000
>> 00002040 00000000 00000000 00000000 00000000
>> [ 9.832104] Compat vDSO mapped to ffffe000.
>> [ 9.832119] Checking 'hlt' instruction... OK.
>> [ 9.848319] SMP alternatives: switching to UP code
>> [ 9.850643] Freeing SMP alternatives: 11k freed
>> [ 9.850779] Early unpacking initramfs... done
>> [ 10.256933] ACPI: Core revision 20070126
>> [ 10.257010] ACPI: Looking for DSDT in initramfs... error, file
>> /DSDT.aml not found.
>> [ 10.269153] CPU0: Intel(R) Celeron(R) M processor 1.50GHz
>> stepping 08
>> [ 10.269185] Total of 1 processors activated (2989.13 BogoMIPS).
>> [ 10.269939] ENABLING IO-APIC IRQs
>> [ 10.270268] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 10.415895] Brought up 1 CPUs
>> [ 10.415958] CPU0 attaching sched-domain:
>> [ 10.415962] domain 0: span 01
>> [ 10.415964] groups: 01
>> [ 10.416175] net_namespace: 64 bytes
>> [ 10.416187] Booting paravirtualized kernel on bare hardware
>> [ 10.416733] Time: 11:35:07 Date: 07/10/08
>> [ 10.416768] NET: Registered protocol family 16
>> [ 10.416996] EISA bus registered
>> [ 10.417032] ACPI: bus type pci registered
>> [ 10.417199] PCI: PCI BIOS revision 2.10 entry at 0xe9c04, last bus=1
>> [ 10.417202] PCI: Using configuration type 1
>> [ 10.417219] Setting up standard PCI resources
>> [ 10.419577] ACPI: EC: Look up EC in DSDT
>> [ 10.422554] ACPI: Interpreter enabled
>> [ 10.422558] ACPI: (supports S0 S1 S3 S4 S5)
>> [ 10.422577] ACPI: Using IOAPIC for interrupt routing
>> [ 10.424370] ACPI: EC: non-query interrupt received, switching to
>> interrupt mode
>> [ 10.432830] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data =
>> 0x62
>> [ 10.432834] ACPI: EC: driver started in interrupt mode
>> [ 10.432878] ACPI: PCI Root Bridge [PCI0] (0000:00)
>> [ 10.433691] PCI quirk: region 1000-107f claimed by vt8235 PM
>> [ 10.433696] PCI quirk: region 1400-140f claimed by vt8235 SMB
>> [ 10.434170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> [ 10.447250] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>> [ 10.447356] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
>> [ 10.447452] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
>> [ 10.447548] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
>> [ 10.447634] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15)
>> *0, disabled.
>> [ 10.447720] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15)
>> *0, disabled.
>> [ 10.447807] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15)
>> *0, disabled.
>> [ 10.447900] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15)
>> *0, disabled.
>> [ 10.448009] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
>> [ 10.448127] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
>> [ 10.448282] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
>> [ 10.448368] ACPI Error (uteval-0290): Return object type is incorrect
>> [\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE
>> [ 10.448378] ACPI Error (uteval-0296): Type returned from _CRS was
>> incorrect: Integer, expected Btypes: 4 [20070126]
>> [ 10.448385] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS
>> [20070126]
>> [ 10.448388] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
>> [ 10.448497] Linux Plug and Play Support v0.97 (c) Adam Belay
>> [ 10.448532] pnp: PnP ACPI init
>> [ 10.448541] ACPI: bus type pnp registered
>> [ 10.453072] pnp: PnP ACPI: found 9 devices
>> [ 10.453074] ACPI: ACPI bus type pnp unregistered
>> [ 10.453079] PnPBIOS: Disabled by ACPI PNP
>> [ 10.453327] PCI: Using ACPI for IRQ routing
>> [ 10.453331] PCI: If a device doesn't work, try "pci=routeirq". If it
>> helps, post a report
>> [ 10.467869] NET: Registered protocol family 8
>> [ 10.467872] NET: Registered protocol family 20
>> [ 10.467953] AppArmor: AppArmor Filesystem Enabled
>> [ 10.471845] Time: tsc clocksource has been installed.
>> [ 10.479891] system 00:05: iomem range 0xe0000-0xfffff could not be
>> reserved
>> [ 10.479895] system 00:05: iomem range 0xfff80000-0xffffffff could not
>> be reserved
>> [ 10.479899] system 00:05: iomem range 0xfec00000-0xfec00fff has been
>> reserved
>> [ 10.479902] system 00:05: iomem range 0xfee00000-0xfee00fff has been
>> reserved
>> [ 10.479909] system 00:07: ioport range 0x330-0x331 has been reserved
>> [ 10.479913] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>> [ 10.479916] system 00:07: ioport range 0x1000-0x107f has been reserved
>> [ 10.479919] system 00:07: ioport range 0x1400-0x140f has been reserved
>> [ 10.510398] PCI: Bridge: 0000:00:01.0
>> [ 10.510402] IO window: c000-dfff
>> [ 10.510407] MEM window: c0000000-cfffffff
>> [ 10.510412] PREFETCH window: 90000000-9fffffff
>> [ 10.510418] PCI: Bus 2, cardbus bridge: 0000:00:09.0
>> [ 10.510420] IO window: 00001800-000018ff
>> [ 10.510425] IO window: 00001c00-00001cff
>> [ 10.510430] PREFETCH window: 20000000-23ffffff
>> [ 10.510435] MEM window: 24000000-27ffffff
>> [ 10.510460] PCI: Setting latency timer of device 0000:00:01.0 to 64
>> [ 10.510479] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low)
>> -> IRQ 16
>> [ 10.510499] NET: Registered protocol family 2
>> [ 10.547924] IP route cache hash table entries: 4096 (order: 2, 16384
>> bytes)
>> [ 10.548150] TCP established hash table entries: 16384 (order: 5, 131072
>> bytes)
>> [ 10.548283] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>> [ 10.548432] TCP: Hash tables configured (established 16384 bind 16384)
>> [ 10.548436] TCP reno registered
>> [ 10.560021] checking if image is initramfs... it is
>> [ 11.011877] Switched to high resolution mode on CPU 0
>> [ 11.364253] Freeing initrd memory: 7320k freed
>> [ 11.365073] audit: initializing netlink socket (disabled)
>> [ 11.365096] audit(1215689707.500:1): initialized
>> [ 11.367563] VFS: Disk quotas dquot_6.5.1
>> [ 11.367660] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>> [ 11.367884] io scheduler noop registered
>> [ 11.367887] io scheduler anticipatory registered
>> [ 11.367890] io scheduler deadline registered
>> [ 11.367906] io scheduler cfq registered (default)
>> [ 11.367927] PCI: VIA PCI bridge detected. Disabling DAC.
>> [ 11.367989] Boot video device is 0000:01:00.0
>> [ 11.368325] isapnp: Scanning for PnP cards...
>> [ 11.722747] isapnp: No Plug & Play device found
>> [ 11.755717] Real Time Clock Driver v1.12ac
>> [ 11.755862] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
>> sharing enabled
>> [ 11.757256] RAMDISK driver initialized: 16 RAM disks of 65536K size
>> 1024 blocksize
>> [ 11.757343] input: Macintosh mouse button emulation as
>> /devices/virtual/input/input0
>> [ 11.757465] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at
>> 0x60,0x64 irq 1,12
>> [ 11.769928] i8042.c: Detected active multiplexing controller, rev 1.1.
>> [ 11.775775] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [ 11.775781] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>> [ 11.775784] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>> [ 11.775787] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>> [ 11.775789] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>> [ 11.787809] mice: PS/2 mouse device common for all mice
>> [ 11.787942] EISA: Probing bus 0 at eisa.0
>> [ 11.787952] Cannot allocate resource for EISA slot 1
>> [ 11.787986] EISA: Detected 0 cards.
>> [ 11.787989] cpuidle: using governor ladder
>> [ 11.787992] cpuidle: using governor menu
>> [ 11.788123] NET: Registered protocol family 1
>> [ 11.788158] Using IPI No-Shortcut mode
>> [ 11.788202] registered taskstats version 1
>> [ 11.788323] Magic number: 0:950:579
>> [ 11.788520] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>> [ 11.788523] EDD information not available.
>> [ 11.788814] Freeing unused kernel memory: 368k freed
>> [ 11.799808] input: AT Translated Set 2 keyboard as
>> /devices/platform/i8042/serio0/input/input1
>> [ 13.036625] fuse init (API version 7.9)
>> [ 13.062468] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>> [ 13.062476] ACPI: Processor [CPU0] (supports 16 throttling states)
>> [ 13.887666] usbcore: registered new interface driver usbfs
>> [ 13.887700] usbcore: registered new interface driver hub
>> [ 13.907327] usbcore: registered new device driver usb
>> [ 13.951301] SCSI subsystem initialized
>> [ 13.959978] USB Universal Host Controller Interface driver v3.0
>> [ 13.960216] ACPI Error (uteval-0290): Return object type is incorrect
>> [\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE
>> [ 13.960227] ACPI Error (uteval-0296): Type returned from _CRS was
>> incorrect: Integer, expected Btypes: 4 [20070126]
>> [ 13.960234] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS
>> [20070126]
>> [ 13.960239] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try
>> pci=noacpi or acpi=off
>> [ 13.960244] ACPI: Invalid IRQ link routing entry
>> [ 13.960246] ACPI: Unable to derive IRQ for device 0000:00:10.0
>> [ 13.960248] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11
>> [ 13.960278] uhci_hcd 0000:00:10.0: UHCI Host Controller
>> [ 13.960850] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
>> number 1
>> [ 13.960891] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
>> [ 13.961069] usb usb1: configuration #1 chosen from 1 choice
>> [ 13.961100] hub 1-0:1.0: USB hub found
>> [ 13.961108] hub 1-0:1.0: 2 ports detected
>> [ 14.044596] libata version 3.00 loaded.
>> [ 14.059581] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald
>> Becker
>> [ 14.063827] ACPI Error (uteval-0290): Return object type is incorrect
>> [\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE
>> [ 14.063840] ACPI Error (uteval-0296): Type returned from _CRS was
>> incorrect: Integer, expected Btypes: 4 [20070126]
>> [ 14.063847] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS
>> [20070126]
>> [ 14.063851] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try
>> pci=noacpi or acpi=off
>> [ 14.063856] ACPI: Invalid IRQ link routing entry
>> [ 14.063858] ACPI: Unable to derive IRQ for device 0000:00:10.1
>> [ 14.063861] ACPI: PCI Interrupt 0000:00:10.1[B]: no GSI - using IRQ 7
>> [ 14.063891] uhci_hcd 0000:00:10.1: UHCI Host Controller
>> [ 14.063940] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
>> number 2
>> [ 14.063979] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
>> [ 14.064116] usb usb2: configuration #1 chosen from 1 choice
>> [ 14.064145] hub 2-0:1.0: USB hub found
>> [ 14.064152] hub 2-0:1.0: 2 ports detected
>> [ 14.167828] ACPI Error (uteval-0290): Return object type is incorrect
>> [\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE
>> [ 14.167841] ACPI Error (uteval-0296): Type returned from _CRS was
>> incorrect: Integer, expected Btypes: 4 [20070126]
>> [ 14.167848] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS
>> [20070126]
>> [ 14.167853] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try
>> pci=noacpi or acpi=off
>> [ 14.167858] ACPI: Invalid IRQ link routing entry
>> [ 14.167860] ACPI: Unable to derive IRQ for device 0000:00:10.2
>> [ 14.167862] ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5
>> [ 14.167892] uhci_hcd 0000:00:10.2: UHCI Host Controller
>> [ 14.167925] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
>> number 3
>> [ 14.167963] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
>> [ 14.168101] usb usb3: configuration #1 chosen from 1 choice
>> [ 14.168138] hub 3-0:1.0: USB hub found
>> [ 14.168145] hub 3-0:1.0: 2 ports detected
>> [ 14.271895] PCI: Enabling device 0000:00:10.3 (0000 -> 0002)
>> [ 14.272034] ACPI Error (uteval-0290): Return object type is incorrect
>> [\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE
>> [ 14.272044] ACPI Error (uteval-0296): Type returned from _CRS was
>> incorrect: Integer, expected Btypes: 4 [20070126]
>> [ 14.272051] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS
>> [20070126]
>> [ 14.272056] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try
>> pci=noacpi or acpi=off
>> [ 14.272061] ACPI: Invalid IRQ link routing entry
>> [ 14.272063] ACPI: Unable to derive IRQ for device 0000:00:10.3
>> [ 14.272065] ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10
>> [ 14.272099] ehci_hcd 0000:00:10.3: EHCI Host Controller
>> [ 14.272132] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus
>> number 4
>> [ 14.272199] ehci_hcd 0000:00:10.3: irq 10, io mem 0x28011000
>> [ 14.283538] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver
>> 10 Dec 2004
>> [ 14.283693] usb usb4: configuration #1 chosen from 1 choice
>> [ 14.283725] hub 4-0:1.0: USB hub found
>> [ 14.283734] hub 4-0:1.0: 6 ports detected
>> [ 14.388016] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using
>> IRQ 23
>> [ 14.388022] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
>> [ 14.388032] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI
>> 23 (level, low) -> IRQ 17
>> [ 14.392288] eth0: VIA Rhine II at 0xd0000000, 00:40:d0:86:8e:eb, IRQ
>> 17.
>> [ 14.393003] eth0: MII PHY found at address 1, status 0x7849 advertising
>> 05e1 Link 0000.
>> [ 14.393188] ACPI: PCI Interrupt Link [ALKA] disabled and referenced,
>> BIOS bug
>> [ 14.393238] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using
>> IRQ 20
>> [ 14.393241] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
>> [ 14.393245] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI
>> 20 (level, low) -> IRQ 18
>> [ 14.393300] ACPI: PCI interrupt for device 0000:00:11.1 disabled
>> [ 14.397289] pata_via 0000:00:11.1: version 0.3.3
>> [ 14.397323] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI
>> 20 (level, low) -> IRQ 18
>> [ 14.398211] scsi0 : pata_via
>> [ 14.398868] scsi1 : pata_via
>> [ 14.401414] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100
>> irq 14
>> [ 14.401418] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108
>> irq 15
>> [ 14.564066] ata1.00: ATA-7: FUJITSU MHV2060AT, 000000A0, max UDMA/100
>> [ 14.564072] ata1.00: 117210240 sectors, multi 16: LBA
>> [ 14.579952] ata1.00: configured for UDMA/100
>> [ 14.899880] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CW02, max
>> UDMA/33
>> [ 15.071737] ata2.00: configured for UDMA/33
>> [ 15.071918] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2060A
>> 0000 PQ: 0 ANSI: 5
>> [ 15.075723] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4082N
>> CW02 PQ: 0 ANSI: 5
>> [ 15.090909] Driver 'sd' needs updating - please use bus_type methods
>> [ 15.091035] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors
>> (60012 MB)
>> [ 15.091050] sd 0:0:0:0: [sda] Write Protect is off
>> [ 15.091053] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [ 15.091072] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> enabled, doesn't support DPO or FUA
>> [ 15.091132] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors
>> (60012 MB)
>> [ 15.091143] sd 0:0:0:0: [sda] Write Protect is off
>> [ 15.091146] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [ 15.091163] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> enabled, doesn't support DPO or FUA
>> [ 15.091168] sda:<4>Driver 'sr' needs updating - please use bus_type
>> methods
>> [ 15.166767] sda1 sda2 < sda5 >
>> [ 15.195474] sd 0:0:0:0: [sda] Attached SCSI disk
>> [ 15.203009] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> [ 15.203035] sr 1:0:0:0: Attached scsi generic sg1 type 5
>> [ 15.218140] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda
>> tray
>> [ 15.218147] Uniform CD-ROM driver Revision: 3.20
>> [ 15.218216] sr 1:0:0:0: Attached scsi CD-ROM sr0
>> [ 15.507486] Attempting manual resume
>> [ 15.507492] swsusp: Resume From Partition 8:5
>> [ 15.507494] PM: Checking swsusp image.
>> [ 15.507733] PM: Resume from disk failed.
>> [ 15.566034] kjournald starting. Commit interval 5 seconds
>> [ 15.566053] EXT3-fs: mounted filesystem with ordered data mode.
>> [ 26.381371] ath_hal: module license 'Proprietary' taints kernel.
>> [ 26.470537] ath_hal: *MailScanner warning: numerical links are often
>> malicious:* 0.9.18.0 <http://0.9.18.0> (AR5210, AR5211, AR5212, RF5111,
>> RF5112, RF2413, RF5413)
>>
>> [ 26.778543] wlan: 0.9.4
>> [ 26.985778] Yenta: CardBus bridge found at 0000:00:09.0 [1734:10ab]
>> [ 26.985805] Yenta: Using CSCINT to route CSC interrupts to PCI
>> [ 26.985807] Yenta: Routing CardBus interrupts to PCI
>> [ 26.985813] Yenta TI: socket 0000:00:09.0, mfunc 0x01001002, devctl
>> 0x44
>> [ 27.057173] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> [ 27.214868] Yenta: ISA IRQ mask 0x0058, PCI irq 16
>> [ 27.214875] Socket status: 30000006
>> [ 27.270477] Linux agpgart interface v0.102
>> [ 27.326695] shpchp: Standard Hot Plug PCI Controller Driver version:
>> 0.4
>> [ 27.466494] ath_pci: 0.9.4
>> [ 27.466571] PCI: Enabling device 0000:00:06.0 (0000 -> 0002)
>> [ 27.466585] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low)
>> -> IRQ 19
>> [ 28.122417] irda_init()
>> [ 28.122449] NET: Registered protocol family 23
>> [ 28.314524] input: Power Button (FF) as /devices/virtual/input/input2
>> [ 28.326379] ACPI: Power Button (FF) [PWRF]
>> [ 28.326513] input: Lid Switch as /devices/virtual/input/input3
>> [ 28.330090] ACPI: Lid Switch [LID]
>> [ 28.330184] input: Sleep Button (CM) as /devices/virtual/input/input4
>> [ 28.342361] ACPI: Sleep Button (CM) [SBTN]
>> [ 28.342448] input: Power Button (CM) as /devices/virtual/input/input5
>> [ 28.358354] ACPI: Power Button (CM) [PBTN]
>> [ 28.509849] ACPI: Battery Slot [BAT0] (battery present)
>> [ 28.569905] ACPI: AC Adapter [AC] (on-line)
>> [ 28.882467] input: PC Speaker as /devices/platform/pcspkr/input/input6
>> [ 29.726664] input: Video Bus as
>> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7
>> [ 29.742248] ACPI: Video Device [VGA0] (multi-head: yes rom: no post:
>> no)
>> [ 31.412059] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps:
>> 0xa04713/0x0
>> [ 31.525719] input: SynPS/2 Synaptics TouchPad as
>> /devices/platform/i8042/serio3/input/input8
>> [ 31.621384] ath_rate_sample: 1.2 (0.9.4)
>> [ 31.621939] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>> [ 31.621946] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps
>> 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>> [ 31.621956] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
>> [ 31.621960] wifi0: mac 7.8 phy 4.5 radio 5.6
>> [ 31.621965] wifi0: Use hw queue 1 for WME_AC_BE traffic
>> [ 31.621967] wifi0: Use hw queue 0 for WME_AC_BK traffic
>> [ 31.621970] wifi0: Use hw queue 2 for WME_AC_VI traffic
>> [ 31.621972] wifi0: Use hw queue 3 for WME_AC_VO traffic
>> [ 31.621975] wifi0: Use hw queue 8 for CAB traffic
>> [ 31.621977] wifi0: Use hw queue 9 for beacons
>> [ 31.639416] wifi0: Atheros 5212: mem=0x28000000, irq=19
>> [ 31.639945] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
>> [ 31.649968] agpgart: AGP aperture is 128M @ 0xa0000000
>> [ 31.650495] ACPI: PCI Interrupt Link [ALKC] disabled and referenced,
>> BIOS bug
>> [ 31.650629] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using
>> IRQ 22
>> [ 31.650633] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
>> [ 31.650642] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI
>> 22 (level, low) -> IRQ 20
>> [ 31.650794] PCI: Setting latency timer of device 0000:00:11.5 to 64
>> [ 32.174067] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI
>> 22 (level, low) -> IRQ 20
>> [ 32.178049] PCI: Setting latency timer of device 0000:00:11.6 to 64
>> [ 32.930466] cs: IO port probe 0x100-0x3af: clean.
>> [ 32.932595] cs: IO port probe 0x3e0-0x4ff: clean.
>> [ 32.933496] cs: IO port probe 0x820-0x8ff: clean.
>> [ 32.934257] cs: IO port probe 0xc00-0xcf7: clean.
>> [ 32.935183] cs: IO port probe 0xa00-0xaff: clean.
>> [ 34.178500] lp: driver loaded but no devices found
>> [ 34.416967] Adding 1317288k swap on /dev/sda5. Priority:-1 extents:1
>> across:1317288k
>> [ 34.970618] EXT3 FS on sda1, internal journal
>> [ 36.310640] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [ 38.214942] No dock devices found.
>> [ 39.691408] apm: BIOS not found.
>> [ 39.889455] ppdev: user-space parallel port driver
>> [ 40.068891] audit(1215689737.069:2): type=1503
>> operation="inode_permission" requested_mask="a::" denied_mask="a::"
>> name="/dev/tty" pid=4804 profile="/usr/sbin/cupsd" namespace="default"
>> [ 42.195722] eth0: link down
>> [ 42.354126] Bluetooth: Core ver 2.11
>> [ 42.355253] NET: Registered protocol family 31
>> [ 42.355258] Bluetooth: HCI device and connection manager initialized
>> [ 42.355264] Bluetooth: HCI socket layer initialized
>> [ 42.381247] Bluetooth: L2CAP ver 2.9
>> [ 42.381255] Bluetooth: L2CAP socket layer initialized
>> [ 42.464994] Bluetooth: RFCOMM socket layer initialized
>> [ 42.465017] Bluetooth: RFCOMM TTY layer initialized
>> [ 42.465019] Bluetooth: RFCOMM ver 1.8
>> [ 45.060591] [drm] Initialized drm 1.1.0 20060810
>> [ 45.580968] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low)
>> -> IRQ 21
>> [ 45.581781] [drm] Initialized via 2.11.1 20070202 on minor 0
>> [ 45.789539] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>> [ 45.789568] agpgart: Device is in legacy mode, falling back to 2.x
>> [ 45.789576] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
>> [ 45.789658] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
>> [ 62.841756] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>> [ 62.842069] agpgart: Device is in legacy mode, falling back to 2.x
>> [ 62.842217] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
>> [ 62.842436] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
>> [ 90.342541] NET: Registered protocol family 10
>> [ 90.343136] lo: Disabled Privacy Extensions
>> [ 90.343814] ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [ 101.332234] ath0: no IPv6 routers present
>> [ 221.124478] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>> [ 221.188728] NET: Registered protocol family 17
>> [ 232.049231] ath0: no IPv6 routers present
>> [ 243.268683] ath0: no IPv6 routers present
>> chad at chad-laptop:~$
>>
>>
>> lsmod
>>
>>
>> chad at chad-laptop:~$ sudo lsmod
>> Module Size Used by
>> af_packet 23812 4
>> ipv6 267780 8
>> binfmt_misc 12808 1
>> via 43648 2
>> drm 82452 3 via
>> rfcomm 41744 2
>> l2cap 25728 13 rfcomm
>> bluetooth 61156 4 rfcomm,l2cap
>> ppdev 10372 0
>> cpufreq_conservative 8712 0
>> cpufreq_stats 7104 0
>> cpufreq_ondemand 9740 0
>> cpufreq_userspace 5284 0
>> freq_table 5536 2 cpufreq_stats,cpufreq_ondemand
>> cpufreq_powersave 2688 0
>> container 5632 0
>> sbs 15112 0
>> sbshc 7680 1 sbs
>> dock 11280 0
>> iptable_filter 3840 0
>> ip_tables 14820 1 iptable_filter
>> x_tables 16132 1 ip_tables
>> parport_pc 36260 0
>> lp 12324 0
>> parport 37832 3 ppdev,parport_pc,lp
>> joydev 13120 0
>> pcmcia 40876 0
>> i2c_viapro 9876 0
>> i2c_core 24832 1 i2c_viapro
>> wlan_scan_sta 14720 1
>> ath_rate_sample 14336 1
>> evdev 13056 7
>> serio_raw 7940 0
>> psmouse 40336 0
>> snd_via82xx_modem 16264 0
>> snd_seq_dummy 4868 0
>> video 19856 0
>> snd_via82xx 29464 3
>> output 4736 1 video
>> gameport 16008 1 snd_via82xx
>> snd_ac97_codec 101028 2 snd_via82xx_modem,snd_via82xx
>> ac97_bus 3072 1 snd_ac97_codec
>> snd_pcm_oss 42144 0
>> snd_mixer_oss 17920 1 snd_pcm_oss
>> snd_pcm 78596 4
>> snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_pcm_oss
>> snd_mpu401_uart 9728 1 snd_via82xx
>> snd_seq_oss 35584 0
>> snd_seq_midi 9376 0
>> snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
>> pcspkr 4224 0
>> snd_rawmidi 25760 2 snd_mpu401_uart,snd_seq_midi
>> snd_seq 54224 6
>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
>> snd_timer 24836 2 snd_pcm,snd_seq
>> snd_seq_device 9612 5
>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
>> ac 6916 0
>> battery 14212 0
>> via_ircc 27796 0
>> button 9232 0
>> snd 56996 19
>> snd_via82xx_modem,snd_seq_dummy,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
>> via_agp 11136 1
>> irda 203068 1 via_ircc
>> snd_page_alloc 11400 3 snd_via82xx_modem,snd_via82xx,snd_pcm
>> ath_pci 101024 0
>> soundcore 8800 1 snd
>> agpgart 34760 2 drm,via_agp
>> crc_ccitt 3072 1 irda
>> shpchp 34452 0
>> pci_hotplug 30880 1 shpchp
>> yenta_socket 27276 1
>> rsrc_nonstatic 13696 1 yenta_socket
>> pcmcia_core 40596 3 pcmcia,yenta_socket,rsrc_nonstatic
>> wlan 207728 4 wlan_scan_sta,ath_rate_sample,ath_pci
>> ath_hal 192592 3 ath_rate_sample,ath_pci
>> ext3 136712 1
>> jbd 48404 1 ext3
>> mbcache 9600 1 ext3
>> sg 36880 0
>> sr_mod 17956 0
>> cdrom 37408 1 sr_mod
>> sd_mod 30720 3
>> ata_generic 8324 0
>> pata_via 13316 2
>> pata_acpi 8320 0
>> via_rhine 26632 0
>> mii 6400 1 via_rhine
>> libata 159344 3 ata_generic,pata_via,pata_acpi
>> ehci_hcd 37900 0
>> uhci_hcd 27024 0
>> scsi_mod 151436 4 sg,sr_mod,sd_mod,libata
>> usbcore 146028 3 ehci_hcd,uhci_hcd
>> thermal 16796 0
>> processor 36872 2 thermal
>> fan 5636 0
>> fbcon 42912 0
>> tileblit 3456 1 fbcon
>> font 9472 1 fbcon
>> bitblit 6784 1 fbcon
>> softcursor 3072 1 bitblit
>> fuse 50580 3
>> chad at chad-laptop:~$
>>
>> Στις 10 Ιούλιος 2008 2:26 μμ,ο χρήστης Tsabolov Sergey <econlab at uom.gr>
>> έγραψε:
>>
>>> Αφού τον άλλαξες με το χέρι αυτό έχει να κάνει με την κάρτα γραφικών ,
>>> αν είναι onboard τότε έχουμε μικρό πρόβλημα , κάρτες υπάρχουν ακόμα και
>>> παλιές έστω με 64 μβ και δεν είναι πρόβλημα να τις βρεις , αν ήτανε μόνο
>>> αυτό πρόβλημα το λύνουμε βάζοντας μια κάρτα και τότε θα έχει και 3D και
>>> φωτιές και βροχές και όλα τα καλούδια .
>>>
>>>
>>> O/H g k έγραψε:
>>>
>>> Το δοκίμασα αυτό δεν δουλεψε στο 8.04 τον xorg τον άλλαξα με το χέρι
>>>
>>> Στις 10 Ιούλιος 2008 1:52 μμ,ο χρήστης Tsabolov Sergey <econlab at uom.gr>
>>> έγραψε:
>>>
>>>> https://help.ubuntu.com/community/OpenChrome
>>>>
>>>> Όπως λέμε στο Λίνουξ δεν υπάρχει πρόβλημα χωρίς λύση οπότε πάρε στα
>>>> χέρια σου το Η/Υ και βλέπουμε άσχετα τι chip έχει
>>>>
>>>> θα δούμε μετά .
>>>>
>>>> O/H g k έγραψε:
>>>>
>>>> Δυστυχώς όλα επάνω ειναι τσιπάκια via και εκεί είναι το πρόβλημα στην
>>>> κοινότητα έχουν ανοίξει project ειδικά για το θέμα αυτό
>>>> http://www.openchrome.org/
>>>> λίγοι όμως έχουν καταφέρει να συνθέσουν τους οδηγούς με επιτυχία
>>>>
>>>> Στις 10 Ιούλιος 2008 1:33 μμ,ο χρήστης Tsabolov Sergey <econlab at uom.gr>
>>>> έγραψε:
>>>>
>>>>> Αν μιλάμε για μητρική δεν νομίζω ότι θα έχει μεγάλο πρόβλημα για 3D
>>>>> κτλ να έχει μία κάρτα έστω 64 MB nvidia αρκεί .
>>>>>
>>>>> τα υπόλοιπα βλέπουμε .
>>>>>
>>>>>
>>>>> O/H g k έγραψε:
>>>>>
>>>>> Μητρική είναι μόλις μου έρθει το μηχάνημα θα στείλω τα logs κατάφερα
>>>>> πολλές απο τις ρυθμίσεις αλλα απο ότι είδα και στην κοινότητα υπάρχει
>>>>> πρόβλημα με τους οδηγούς αυτο που δέν μπορώ είναι τα τρισδιάστατα αλλά απο
>>>>> ότι βλέπω το μοντέλο είναι σπάνιο ειδικά μέσα στην κοινότητα ;-0) ο κάτοχος
>>>>> είναι 15 ετών και δεν θέλω να απογοητευτεί απο την πρώτη επαφή του με τα
>>>>> λίνουξ.Ευχαριστώ...!!!
>>>>>
>>>>> Στις 10 Ιούλιος 2008 12:30 μμ,ο χρήστης Tsabolov Sergey <
>>>>> econlab at uom.gr> έγραψε:
>>>>>
>>>>>> Λίγα στοιχεία του μηχανήματος θα ήτανε καλό να δώσεις
>>>>>>
>>>>>> VIA είναι VGA card ?
>>>>>>
>>>>>> Από τερματικό , έγραψε όλα αυτά .
>>>>>>
>>>>>> lspci
>>>>>>
>>>>>> dmesg
>>>>>>
>>>>>> lsmod
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> O/H g k έγραψε:
>>>>>>
>>>>>> Προσπαθώντας να μπολιάσω ένα ακόμα μηχάνημα amilo L7310W με Ubuntu
>>>>>> 8.04 τράκαρα με την καθόλου φιλική VIA ο γούγλης δεν βοηθάει πολύ υπάρχει
>>>>>> κάποιος μεταξύ μας που έχει αντιμετωπίσει αυτό το προβλημα???
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.ubuntu.com/archives/ubuntu-gr/attachments/20080710/68b561da/attachment-0001.htm
More information about the Ubuntu-gr
mailing list