[hardy] disque dur non monté
numarrou
numarrou at free.fr
Mer 7 Mai 19:43:34 UTC 2008
bonjour
sur un PC de bureau j'ai 2 disques durs :
- sda
- sdb (sur lequel est installé mon système)
Au démarrage j'ai des message d'erreur, je suis obligé de faire Ctrl + D
pour pouvoir bouter et au final seul sdb est bien monté (les partitions
de sda n'apparaissent pas)
ci-dessous mon dmesg, des fois que ça vous parlerait
merci
manu
------------------------------
[ 0.000000] Linux version 2.6.24-16-generic (buildd at palmer) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC
2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fb870
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA5F0 checksum 0
[ 0.000000] ACPI: RSDP 000FA5F0, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7 10
MSFT 97)
[ 0.000000] ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7 11
MSFT 97)
[ 0.000000] ACPI: DSDT 1FFF0120, 319A (r1 VIA VIA_K7 1000
MSFT 100000D)
[ 0.000000] ACPI: FACS 1FFF8000, 0040
[ 0.000000] ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7 9
MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:6 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000
- 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000
- 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 130033
[ 0.000000] Kernel command line:
root=UUID=45986aad-ee03-4b37-95c1-98c837eafb19 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1338.171 MHz processor.
[ 18.183518] Console: colour VGA+ 80x25
[ 18.183524] console [tty0] enabled
[ 18.184075] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 18.184528] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 18.207722] Memory: 507300k/524224k available (2157k kernel code,
16304k reserved, 998k data, 364k init, 0k highmem)
[ 18.207735] virtual kernel memory layout:
[ 18.207737] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 18.207739] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.207740] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 18.207742] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 18.207744] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 18.207746] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 18.207748] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 18.207753] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 18.207819] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 18.287824] Calibrating delay using timer specific routine.. 2678.86
BogoMIPS (lpj=5357724)
[ 18.287877] Security Framework initialized
[ 18.287888] SELinux: Disabled at boot.
[ 18.287919] AppArmor: AppArmor initialized
[ 18.287927] Failure registering capabilities with primary security
module.
[ 18.287943] Mount-cache hash table entries: 512
[ 18.288158] CPU: After generic identify, caps: 0383fbff c1cbfbff
00000000 00000000 00000000 00000000 00000000 00000000
[ 18.288173] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 18.288177] CPU: L2 Cache: 256K (64 bytes/line)
[ 18.288181] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000
00000420 00000000 00000000 00000000 00000000
[ 18.288198] Compat vDSO mapped to ffffe000.
[ 18.288218] Checking 'hlt' instruction... OK.
[ 18.304175] SMP alternatives: switching to UP code
[ 18.305856] Freeing SMP alternatives: 11k freed
[ 18.306069] Early unpacking initramfs... done
[ 18.828586] ACPI: Core revision 20070126
[ 18.828718] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 18.831203] CPU0: AMD Athlon(tm) XP 1500+ stepping 02
[ 18.831239] Total of 1 processors activated (2678.86 BogoMIPS).
[ 18.832006] ENABLING IO-APIC IRQs
[ 18.832329] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 18.979725] Brought up 1 CPUs
[ 18.979805] CPU0 attaching sched-domain:
[ 18.979810] domain 0: span 01
[ 18.979813] groups: 01
[ 18.980145] net_namespace: 64 bytes
[ 18.980159] Booting paravirtualized kernel on bare hardware
[ 18.980890] Time: 20:48:58 Date: 05/07/08
[ 18.980945] NET: Registered protocol family 16
[ 18.981304] EISA bus registered
[ 18.981337] ACPI: bus type pci registered
[ 18.983051] PCI: PCI BIOS revision 2.10 entry at 0xfdb21, last bus=1
[ 18.983056] PCI: Using configuration type 1
[ 18.983058] Setting up standard PCI resources
[ 18.988268] ACPI: EC: Look up EC in DSDT
[ 18.993102] ACPI: Interpreter enabled
[ 18.993108] ACPI: (supports S0 S1 S4 S5)
[ 18.993127] ACPI: Using IOAPIC for interrupt routing
[ 18.998867] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.999555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.012539] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 19.012665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 19.012785] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 19.012905] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 19.013044] ACPI: Power Resource [URP1] (off)
[ 19.013084] ACPI: Power Resource [URP2] (off)
[ 19.013123] ACPI: Power Resource [FDDP] (off)
[ 19.013162] ACPI: Power Resource [LPTP] (off)
[ 19.013234] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.013289] pnp: PnP ACPI init
[ 19.013301] ACPI: bus type pnp registered
[ 19.017060] pnp: PnP ACPI: found 12 devices
[ 19.017066] ACPI: ACPI bus type pnp unregistered
[ 19.017073] PnPBIOS: Disabled by ACPI PNP
[ 19.017488] PCI: Using ACPI for IRQ routing
[ 19.017493] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 19.027696] NET: Registered protocol family 8
[ 19.027700] NET: Registered protocol family 20
[ 19.027831] AppArmor: AppArmor Filesystem Enabled
[ 19.031629] Time: tsc clocksource has been installed.
[ 19.070361] PCI: Bridge: 0000:00:01.0
[ 19.070365] IO window: disabled.
[ 19.070372] MEM window: dde00000-dfefffff
[ 19.070377] PREFETCH window: cdc00000-ddcfffff
[ 19.070398] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.070418] NET: Registered protocol family 2
[ 19.107753] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 19.108127] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 19.108454] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 19.108786] TCP: Hash tables configured (established 16384 bind 16384)
[ 19.108790] TCP reno registered
[ 19.119855] checking if image is initramfs... it is
[ 19.571504] Switched to high resolution mode on CPU 0
[ 20.099339] Freeing initrd memory: 7698k freed
[ 20.100500] audit: initializing netlink socket (disabled)
[ 20.100525] audit(1210193338.788:1): initialized
[ 20.103792] VFS: Disk quotas dquot_6.5.1
[ 20.103911] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.104155] io scheduler noop registered
[ 20.104159] io scheduler anticipatory registered
[ 20.104163] io scheduler deadline registered
[ 20.104178] io scheduler cfq registered (default)
[ 20.104196] PCI: VIA PCI bridge detected. Disabling DAC.
[ 20.104255] Boot video device is 0000:01:00.0
[ 20.104692] isapnp: Scanning for PnP cards...
[ 20.458346] isapnp: No Plug & Play device found
[ 20.505910] Real Time Clock Driver v1.12ac
[ 20.506068] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 20.506232] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.506398] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 20.507255] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.507758] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 20.509154] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 20.509273] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 20.509457] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 20.511806] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.511814] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.515356] mice: PS/2 mouse device common for all mice
[ 20.515559] EISA: Probing bus 0 at eisa.0
[ 20.515602] EISA: Detected 0 cards.
[ 20.515609] cpuidle: using governor ladder
[ 20.515612] cpuidle: using governor menu
[ 20.515843] NET: Registered protocol family 1
[ 20.515893] Using IPI No-Shortcut mode
[ 20.515958] registered taskstats version 1
[ 20.516078] Magic number: 8:428:851
[ 20.516280] hash matches device ptyv3
[ 20.516390] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 20.516393] EDD information not available.
[ 20.517130] Freeing unused kernel memory: 364k freed
[ 20.543149] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 21.888092] fuse init (API version 7.9)
[ 21.922895] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 22.830447] usbcore: registered new interface driver usbfs
[ 22.830490] usbcore: registered new interface driver hub
[ 22.862397] usbcore: registered new device driver usb
[ 22.882350] 8139too Fast Ethernet driver 0.9.28
[ 22.882470] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 22.883121] eth0: RealTek RTL8139 at 0xe000, 00:e0:4c:48:83:02, IRQ 16
[ 22.883126] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 22.902417] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 22.921103] USB Universal Host Controller Interface driver v3.0
[ 22.921253] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level,
low) -> IRQ 17
[ 22.921274] uhci_hcd 0000:00:08.0: UHCI Host Controller
[ 22.921729] uhci_hcd 0000:00:08.0: new USB bus registered, assigned
bus number 1
[ 22.921779] uhci_hcd 0000:00:08.0: irq 17, io base 0x0000e400
[ 22.922037] usb usb1: configuration #1 chosen from 1 choice
[ 22.922084] hub 1-0:1.0: USB hub found
[ 22.922095] hub 1-0:1.0: 2 ports detected
[ 22.958989] SCSI subsystem initialized
[ 22.998365] Floppy drive(s): fd0 is 1.44M
[ 23.014331] libata version 3.00 loaded.
[ 23.018379] FDC 0 is a post-1991 82077
[ 23.022465] ACPI: PCI Interrupt 0000:00:08.1[B] -> GSI 16 (level,
low) -> IRQ 16
[ 23.022488] uhci_hcd 0000:00:08.1: UHCI Host Controller
[ 23.022528] uhci_hcd 0000:00:08.1: new USB bus registered, assigned
bus number 2
[ 23.022570] uhci_hcd 0000:00:08.1: irq 16, io base 0x0000e800
[ 23.022764] usb usb2: configuration #1 chosen from 1 choice
[ 23.022803] hub 2-0:1.0: USB hub found
[ 23.022814] hub 2-0:1.0: 2 ports detected
[ 23.126613] ACPI: PCI Interrupt 0000:00:08.2[C] -> GSI 17 (level,
low) -> IRQ 18
[ 23.126642] ehci_hcd 0000:00:08.2: EHCI Host Controller
[ 23.126690] ehci_hcd 0000:00:08.2: new USB bus registered, assigned
bus number 3
[ 23.126766] ehci_hcd 0000:00:08.2: irq 18, io mem 0xdfffff00
[ 23.138261] ehci_hcd 0000:00:08.2: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 23.138497] usb usb3: configuration #1 chosen from 1 choice
[ 23.138539] hub 3-0:1.0: USB hub found
[ 23.138552] hub 3-0:1.0: 4 ports detected
[ 23.242546] pata_via 0000:00:11.1: version 0.3.3
[ 23.244495] scsi0 : pata_via
[ 23.246108] scsi1 : pata_via
[ 23.248786] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00
irq 14
[ 23.248791] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08
irq 15
[ 23.419704] ata1.00: ATA-5: WDC WD800BB-00CAA1, 17.07W17, max UDMA/100
[ 23.419713] ata1.00: 156301488 sectors, multi 16: LBA
[ 23.419887] ata1.01: ATA-6: WDC WD3000JB-00KFA0, 08.05J08, max UDMA/100
[ 23.419892] ata1.01: 586072368 sectors, multi 16: LBA48
[ 23.435528] ata1.00: configured for UDMA/100
[ 23.442562] ata1.01: configured for UDMA/100
[ 23.901967] usb 3-1: new high speed USB device using ehci_hcd and
address 2
[ 23.926859] ata2.00: ATAPI: CD-RW CDR-2440MB, 5SG3, max UDMA/33
[ 23.926893] ata2.01: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-105S 0122,
E1.22, max UDMA/33
[ 24.036829] usb 3-1: configuration #1 chosen from 1 choice
[ 24.090661] ata2.00: configured for UDMA/33
[ 24.262545] ata2.01: configured for UDMA/33
[ 24.262775] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-00CA
17.0 PQ: 0 ANSI: 5
[ 24.262944] scsi 0:0:1:0: Direct-Access ATA WDC WD3000JB-00K
08.0 PQ: 0 ANSI: 5
[ 24.263518] scsi 1:0:0:0: CD-ROM CD-RW CDR-2440MB
5SG3 PQ: 0 ANSI: 5
[ 24.265302] scsi 1:0:1:0: CD-ROM PIONEER DVD-ROM DVD-105F
1.22 PQ: 0 ANSI: 5
[ 24.301990] Driver 'sd' needs updating - please use bus_type methods
[ 24.302160] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 24.302185] sd 0:0:0:0: [sda] Write Protect is off
[ 24.302190] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.302220] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 24.302304] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 24.302320] sd 0:0:0:0: [sda] Write Protect is off
[ 24.302324] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.302348] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 24.302355] sda:<4>Driver 'sr' needs updating - please use bus_type
methods
[ 24.318621] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.318628] ata1.00: BMDMA stat 0x64
[ 24.318639] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 24.318642] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 24.318647] ata1.00: status: { DRDY ERR }
[ 24.318650] ata1.00: error: { ICRC ABRT }
[ 24.318712] ata1: soft resetting link
[ 24.507476] ata1.00: configured for UDMA/100
[ 24.514585] ata1.01: configured for UDMA/100
[ 24.514614] ata1: EH complete
[ 24.518776] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.518783] ata1.00: BMDMA stat 0x64
[ 24.518792] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 24.518795] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 24.518800] ata1.00: status: { DRDY ERR }
[ 24.518803] ata1.00: error: { ICRC ABRT }
[ 24.518852] ata1: soft resetting link
[ 24.707438] ata1.00: configured for UDMA/100
[ 24.722509] ata1.01: configured for UDMA/100
[ 24.722540] ata1: EH complete
[ 24.727222] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.727229] ata1.00: BMDMA stat 0x64
[ 24.727239] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 24.727241] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 24.727246] ata1.00: status: { DRDY ERR }
[ 24.727249] ata1.00: error: { ICRC ABRT }
[ 24.727304] ata1: soft resetting link
[ 24.915381] ata1.00: configured for UDMA/100
[ 24.922475] ata1.01: configured for UDMA/100
[ 24.922505] ata1: EH complete
[ 24.927322] ata1.00: limiting speed to UDMA/66:PIO4
[ 24.927329] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.927335] ata1.00: BMDMA stat 0x64
[ 24.927344] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 24.927346] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 24.927351] ata1.00: status: { DRDY ERR }
[ 24.927354] ata1.00: error: { ICRC ABRT }
[ 24.927404] ata1: soft resetting link
[ 25.115319] ata1.00: configured for UDMA/66
[ 25.122410] ata1.01: configured for UDMA/100
[ 25.122440] ata1: EH complete
[ 25.127439] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 25.127445] ata1.00: BMDMA stat 0x64
[ 25.127454] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 25.127457] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 25.127462] ata1.00: status: { DRDY ERR }
[ 25.127465] ata1.00: error: { ICRC ABRT }
[ 25.127514] ata1: soft resetting link
[ 25.315228] ata1.00: configured for UDMA/66
[ 25.322319] ata1.01: configured for UDMA/100
[ 25.322349] ata1: EH complete
[ 25.327557] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 25.327563] ata1.00: BMDMA stat 0x64
[ 25.327573] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 25.327575] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 25.327580] ata1.00: status: { DRDY ERR }
[ 25.327583] ata1.00: error: { ICRC ABRT }
[ 25.327633] ata1: soft resetting link
[ 25.515180] ata1.00: configured for UDMA/66
[ 25.522249] ata1.01: configured for UDMA/100
[ 25.522281] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 25.522288] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current]
[descriptor]
[ 25.522296] Descriptor sense data with sense descriptors (in hex):
[ 25.522299] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 25.522308] 00 00 00 07
[ 25.522312] sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
[ 25.522325] end_request: I/O error, dev sda, sector 0
[ 25.522332] Buffer I/O error on device sda, logical block 0
[ 25.522370] ata1: EH complete
[ 25.527645] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 25.527649] ata1.00: BMDMA stat 0x64
[ 25.527660] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 25.527662] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 25.527667] ata1.00: status: { DRDY ERR }
[ 25.527670] ata1.00: error: { ICRC ABRT }
[ 25.527727] ata1: soft resetting link
[ 25.715148] ata1.00: configured for UDMA/66
[ 25.722185] ata1.01: configured for UDMA/100
[ 25.722216] ata1: EH complete
[ 25.727763] ata1.00: limiting speed to UDMA/33:PIO4
[ 25.727770] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 25.727775] ata1.00: BMDMA stat 0x64
[ 25.727785] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 25.727787] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 25.727792] ata1.00: status: { DRDY ERR }
[ 25.727795] ata1.00: error: { ICRC ABRT }
[ 25.727852] ata1: soft resetting link
[ 25.915048] ata1.00: configured for UDMA/33
[ 25.922119] ata1.01: configured for UDMA/100
[ 25.922151] ata1: EH complete
[ 25.927673] ldm_validate_partition_table(): Disk read failed.
[ 25.927689] Dev sda: unable to read RDB block 0
[ 25.927838] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 25.928007] sd 0:0:0:0: [sda] Write Protect is off
[ 25.928011] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.928050] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 25.928085] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 25.928100] sd 0:0:0:0: [sda] Write Protect is off
[ 25.928104] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.928130] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 25.928141] unable to read partition table
[ 25.928246] sd 0:0:0:0: [sda] Attached SCSI disk
[ 25.928930] sd 0:0:1:0: [sdb] 586072368 512-byte hardware sectors
(300069 MB)
[ 25.928952] sd 0:0:1:0: [sdb] Write Protect is off
[ 25.928956] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 25.928982] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 25.929059] sd 0:0:1:0: [sdb] 586072368 512-byte hardware sectors
(300069 MB)
[ 25.929075] sd 0:0:1:0: [sdb] Write Protect is off
[ 25.929079] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 25.929103] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 25.929110] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
[ 25.954725] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 25.970685] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 25.970721] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 25.970792] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 25.970822] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 25.975192] sr0: scsi3-mmc drive: 211x/40x writer cd/rw xa/form2 cdda
tray
[ 25.975204] Uniform CD-ROM driver Revision: 3.20
[ 25.975310] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 25.980675] sr1: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
[ 25.980787] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 31.706047] kjournald starting. Commit interval 5 seconds
[ 31.706076] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.795697] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 31.795779] ata1.01: BMDMA stat 0x64
[ 31.795850] ata1.01: cmd c8/00:20:a6:0b:1b/00:00:00:00:00/f4 tag 0
dma 16384 in
[ 31.795853] res 51/84:00:c5:0b:1b/00:00:00:00:00/f4 Emask
0x10 (ATA bus error)
[ 31.795923] ata1.01: status: { DRDY ERR }
[ 31.795986] ata1.01: error: { ICRC ABRT }
[ 31.796112] ata1: soft resetting link
[ 31.984908] ata1.00: configured for UDMA/33
[ 31.991997] ata1.01: configured for UDMA/100
[ 31.992014] ata1: EH complete
[ 31.995398] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 31.995469] ata1.01: BMDMA stat 0x64
[ 31.995537] ata1.01: cmd c8/00:20:a6:0b:1b/00:00:00:00:00/f4 tag 0
dma 16384 in
[ 31.995540] res 51/84:00:c5:0b:1b/00:00:00:00:00/f4 Emask
0x10 (ATA bus error)
[ 31.995608] ata1.01: status: { DRDY ERR }
[ 31.995671] ata1.01: error: { ICRC ABRT }
[ 31.995774] ata1: soft resetting link
[ 32.184815] ata1.00: configured for UDMA/33
[ 32.199915] ata1.01: configured for UDMA/100
[ 32.199924] ata1: EH complete
[ 32.200044] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 32.203461] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 32.203529] ata1.01: BMDMA stat 0x64
[ 32.203598] ata1.01: cmd c8/00:20:a6:0b:1b/00:00:00:00:00/f4 tag 0
dma 16384 in
[ 32.203600] res 51/84:00:c5:0b:1b/00:00:00:00:00/f4 Emask
0x10 (ATA bus error)
[ 32.203669] ata1.01: status: { DRDY ERR }
[ 32.203733] ata1.01: error: { ICRC ABRT }
[ 32.203836] ata1: soft resetting link
[ 32.392735] ata1.00: configured for UDMA/33
[ 32.399846] ata1.01: configured for UDMA/100
[ 32.399854] ata1: EH complete
[ 32.399971] sd 0:0:0:0: [sda] Write Protect is off
[ 32.399975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 32.403205] ata1.01: limiting speed to UDMA/66:PIO4
[ 32.403211] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 32.403281] ata1.01: BMDMA stat 0x64
[ 32.403349] ata1.01: cmd c8/00:20:a6:0b:1b/00:00:00:00:00/f4 tag 0
dma 16384 in
[ 32.403351] res 51/84:00:c5:0b:1b/00:00:00:00:00/f4 Emask
0x10 (ATA bus error)
[ 32.403421] ata1.01: status: { DRDY ERR }
[ 32.403484] ata1.01: error: { ICRC ABRT }
[ 32.403588] ata1: soft resetting link
[ 32.592695] ata1.00: configured for UDMA/33
[ 32.607771] ata1.01: configured for UDMA/66
[ 32.607778] ata1: EH complete
[ 32.611272] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 32.611348] ata1.01: BMDMA stat 0x64
[ 32.611423] ata1.01: cmd c8/00:20:a6:0b:1b/00:00:00:00:00/f4 tag 0
dma 16384 in
[ 32.611425] res 51/84:00:c5:0b:1b/00:00:00:00:00/f4 Emask
0x10 (ATA bus error)
[ 32.611506] ata1.01: status: { DRDY ERR }
[ 32.611577] ata1.01: error: { ICRC ABRT }
[ 32.611687] ata1: soft resetting link
[ 32.800626] ata1.00: configured for UDMA/33
[ 32.807701] ata1.01: configured for UDMA/66
[ 32.807709] ata1: EH complete
[ 32.807827] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 32.811017] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 32.811091] ata1.01: BMDMA stat 0x64
[ 32.811164] ata1.01: cmd c8/00:20:a6:0b:1b/00:00:00:00:00/f4 tag 0
dma 16384 in
[ 32.811166] res 51/84:00:c5:0b:1b/00:00:00:00:00/f4 Emask
0x10 (ATA bus error)
[ 32.811247] ata1.01: status: { DRDY ERR }
[ 32.811317] ata1.01: error: { ICRC ABRT }
[ 32.811427] ata1: soft resetting link
[ 33.000526] ata1.00: configured for UDMA/33
[ 33.007631] ata1.01: configured for UDMA/66
[ 33.007642] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 33.007648] sd 0:0:1:0: [sdb] Sense Key : Aborted Command [current]
[descriptor]
[ 33.007656] Descriptor sense data with sense descriptors (in hex):
[ 33.007659] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 33.007668] 04 1b 0b c5
[ 33.007672] sd 0:0:1:0: [sdb] Add. Sense: Scsi parity error
[ 33.007685] end_request: I/O error, dev sdb, sector 68881318
[ 33.007702] ata1: EH complete
[ 33.007732] sd 0:0:1:0: [sdb] 586072368 512-byte hardware sectors
(300069 MB)
[ 33.007750] sd 0:0:1:0: [sdb] Write Protect is off
[ 33.007754] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 33.007781] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 33.007809] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 33.007825] sd 0:0:0:0: [sda] Write Protect is off
[ 33.007829] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.007856] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 33.007883] sd 0:0:1:0: [sdb] 586072368 512-byte hardware sectors
(300069 MB)
[ 33.007899] sd 0:0:1:0: [sdb] Write Protect is off
[ 33.007903] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 33.007929] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 33.018899] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 33.018971] ata1.01: BMDMA stat 0x64
[ 33.019044] ata1.01: cmd c8/00:08:a6:0b:1b/00:00:00:00:00/f4 tag 0
dma 4096 in
[ 33.019047] res 51/84:00:ad:0b:1b/00:00:00:00:00/f4 Emask
0x10 (ATA bus error)
[ 33.019127] ata1.01: status: { DRDY ERR }
[ 33.019197] ata1.01: error: { ICRC ABRT }
[ 33.019308] ata1: soft resetting link
[ 33.208463] ata1.00: configured for UDMA/33
[ 33.215560] ata1.01: configured for UDMA/66
[ 33.215567] ata1: EH complete
[ 33.218636] ata1.01: limiting speed to UDMA/33:PIO4
[ 33.218641] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 33.218722] ata1.01: BMDMA stat 0x64
[ 33.218794] ata1.01: cmd c8/00:08:a6:0b:1b/00:00:00:00:00/f4 tag 0
dma 4096 in
[ 33.218797] res 51/84:00:ad:0b:1b/00:00:00:00:00/f4 Emask
0x10 (ATA bus error)
[ 33.218878] ata1.01: status: { DRDY ERR }
[ 33.218948] ata1.01: error: { ICRC ABRT }
[ 33.219058] ata1: soft resetting link
[ 33.408409] ata1.00: configured for UDMA/33
[ 33.415495] ata1.01: configured for UDMA/33
[ 33.415503] ata1: EH complete
[ 33.415616] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 33.418386] sd 0:0:0:0: [sda] Write Protect is off
[ 33.418390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.418419] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 33.418448] sd 0:0:1:0: [sdb] 586072368 512-byte hardware sectors
(300069 MB)
[ 33.418464] sd 0:0:1:0: [sdb] Write Protect is off
[ 33.418468] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 33.418494] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 33.418521] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 33.418536] sd 0:0:0:0: [sda] Write Protect is off
[ 33.418540] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.418565] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 33.418597] sd 0:0:1:0: [sdb] 586072368 512-byte hardware sectors
(300069 MB)
[ 33.418614] sd 0:0:1:0: [sdb] Write Protect is off
[ 33.418618] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 33.418645] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 41.671836] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.732489] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.802312] Linux agpgart interface v0.102
[ 41.864639] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[ 41.870830] agpgart: AGP aperture is 64M @ 0xe0000000
[ 42.195611] irda_init()
[ 42.195658] NET: Registered protocol family 23
[ 42.459774] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 42.933573] input: Power Button (FF) as /devices/virtual/input/input3
[ 42.943382] ACPI: Power Button (FF) [PWRF]
[ 42.943510] input: Power Button (CM) as /devices/virtual/input/input4
[ 42.957278] ACPI: Power Button (CM) [PWRB]
[ 42.957562] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 42.971287] ACPI: Sleep Button (CM) [SLPB]
[ 44.546187] nvidia: module license 'NVIDIA' taints kernel.
[ 45.494972] parport_pc 00:04: reported by Plug and Play ACPI
[ 45.495027] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 46.287612] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input6
[ 46.538248] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto
2 vid 0x04A9 pid 0x10C3
[ 46.538283] usbcore: registered new interface driver usblp
[ 46.684791] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level,
low) -> IRQ 18
[ 49.174930] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 49.175749] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05
Tue Jan 22 19:36:58 PST 2008
[ 51.320774] lp0: using parport0 (interrupt-driven).
[ 51.896374] EXT3 FS on sdb3, internal journal
[ 133.867677] kjournald starting. Commit interval 5 seconds
[ 133.868093] EXT3 FS on sdb5, internal journal
[ 133.868101] EXT3-fs: mounted filesystem with ordered data mode.
[ 134.002810] kjournald starting. Commit interval 5 seconds
[ 134.003280] EXT3 FS on sdb6, internal journal
[ 134.003289] EXT3-fs: mounted filesystem with ordered data mode.
[ 134.194919] kjournald starting. Commit interval 5 seconds
[ 134.195310] EXT3 FS on sdb1, internal journal
[ 134.195319] EXT3-fs: mounted filesystem with ordered data mode.
[ 134.969305] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 135.527285] No dock devices found.
[ 137.292660] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 137.292670] apm: overridden by ACPI.
[ 137.421114] ppdev: user-space parallel port driver
[ 137.528435] audit(1210186257.371:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=5084 profile="/usr/sbin/cupsd" namespace="default"
[ 139.137642] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 139.210185] Bluetooth: Core ver 2.11
[ 139.211801] NET: Registered protocol family 31
[ 139.211810] Bluetooth: HCI device and connection manager initialized
[ 139.211817] Bluetooth: HCI socket layer initialized
[ 139.241749] Bluetooth: L2CAP ver 2.9
[ 139.241760] Bluetooth: L2CAP socket layer initialized
[ 139.324603] Bluetooth: RFCOMM socket layer initialized
[ 139.324635] Bluetooth: RFCOMM TTY layer initialized
[ 139.324639] Bluetooth: RFCOMM ver 1.8
[ 140.961210] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 140.964055] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 140.964982] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 142.839220] NET: Registered protocol family 17
[ 146.507490] NET: Registered protocol family 10
[ 146.508432] lo: Disabled Privacy Extensions
[ 157.472252] eth0: no IPv6 routers present
[ 279.626542] usb 3-2: new high speed USB device using ehci_hcd and
address 3
[ 279.841660] usb 3-2: configuration #1 chosen from 1 choice
[ 280.005470] usbcore: registered new interface driver libusual
[ 280.106625] Initializing USB Mass Storage driver...
[ 280.110398] scsi2 : SCSI emulation for USB Mass Storage devices
[ 280.116950] usbcore: registered new interface driver usb-storage
[ 280.116965] USB Mass Storage support registered.
[ 280.118625] usb-storage: device found at 3
[ 280.118630] usb-storage: waiting for device to settle before scanning
[ 285.118372] usb-storage: device scan complete
[ 285.152623] scsi 2:0:0:0: Direct-Access ST332082 0A
3.AA PQ: 0 ANSI: 0
[ 285.155666] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors
(320073 MB)
[ 285.161078] sd 2:0:0:0: [sdc] Write Protect is off
[ 285.161091] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 285.161096] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 285.162284] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors
(320073 MB)
[ 285.163164] sd 2:0:0:0: [sdc] Write Protect is off
[ 285.163169] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 285.163172] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 285.163180] sdc: sdc1
[ 285.177934] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 285.178031] sd 2:0:0:0: Attached scsi generic sg4 type 0
Plus d'informations sur la liste de diffusion ubuntu-fr