scanner epson non reconu

[mdeshorme]

Bonjour,

As-tu installé libsane-extras ?

Bàt,

Michel

On Thursday 27 September 2007 20:14:07 raymond Liabaste wrote:
> Bonjour,
> J'ai un perfection 2450 photo branché en USB, malgré la procédure
> d'installation du wiki il n'est pas reconnu par scanimage ni par xsane.
> lsusb :
> Bus 005 Device 006: ID 04b8:0112 Seiko Epson Corp. Perfection 2450
> Bus 005 Device 001: ID 0000:0000
> Bus 003 Device 001: ID 0000:0000
> Bus 004 Device 001: ID 0000:0000
> Bus 002 Device 002: ID 055d:1031 Samsung Electro-Mechanics Co.
> Bus 002 Device 003: ID 04b4:5500 Cypress Semiconductor Corp. HID->COM
> RS232 Adapter
> Bus 002 Device 001: ID 0000:0000
> Bus 001 Device 003: ID 05a9:8519 OmniVision Technologies, Inc.
> Bus 001 Device 001: ID 0000:0000
>
> sane-find-scanner :
>  # sane-find-scanner will now attempt to detect your scanner. If the
>   # result is different from what you expected, first make sure your
>   # scanner is powered up and properly connected to your computer.
>
>   # No SCSI scanners found. If you expected something different, make
> sure that
>   # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> found USB scanner (vendor=0x04b8 [EPSON], product=0x0112 [EPSON
> Scanner]) at libusb:005:006
> found USB scanner (vendor=0x05a9, product=0x8519) at libusb:001:003
>   # Your USB scanner was (probably) detected. It may or may not be
> supported by
>   # SANE. Try scanimage -L and read the backend's manpage.
>
>   # Not checking for parallel port scanners.
>
>   # Most Scanners connected to the parallel port or other proprietary ports
>   # can't be detected by this program.
>
>   # You may want to run this program as root to find all devices. Once you
>   # found the scanner devices, be sure to adjust access permissions as
>   # necessary.
> une idée ?
>
> Merci
>
> Raymond