RESOLUT Re: probleme Dapper affichage 1280x768 carte i810
Patrick Noël
patrick.noel at argus-presse.fr
Ven 2 Juin 09:36:39 UTC 2006
J'ai utilisé dans le fichier de conf pour 915resolution "mode=5a" et
c'est ok.
Ce qui est bizarre c'est que le 915resolution -l donnais pour le mode 5a
une résolution de 1600x1200 et maintenant j'ai :
Chipset: 915GM
BIOS: TYPE 1
Mode Table Offset: $C0000 + $269
Mode Table Entries: 36
Mode 30 : 640x480, 8 bits/pixel
Mode 32 : 800x600, 8 bits/pixel
Mode 34 : 1024x768, 8 bits/pixel
Mode 38 : 1280x1024, 8 bits/pixel
Mode 3a : 1280x768, 8 bits/pixel
Mode 3c : 1920x1440, 8 bits/pixel
Mode 41 : 640x480, 16 bits/pixel
Mode 43 : 800x600, 16 bits/pixel
Mode 45 : 1024x768, 16 bits/pixel
Mode 49 : 1280x1024, 16 bits/pixel
Mode 4b : 1280x768, 16 bits/pixel
Mode 4d : 1920x1440, 16 bits/pixel
Mode 50 : 640x480, 32 bits/pixel
Mode 52 : 800x600, 32 bits/pixel
Mode 54 : 1024x768, 32 bits/pixel
Mode 58 : 1280x1024, 32 bits/pixel
Mode 5a : 1280x768, 32 bits/pixel
Mode 5c : 1920x1440, 32 bits/pixel
Mode 60 : 512x771, 8 bits/pixel
Mode 61 : 512x771, 16 bits/pixel
Mode 62 : 512x771, 32 bits/pixel
Bon l'important c'est que ça marche mais si vous avez une explication ?
Merci
Patrick
Le vendredi 02 juin 2006 à 10:51 +0200, Patrick Noël a écrit :
> j'ai réinstallé 915resolution et le driver i810 mais c'est toujours en
> 1024x768.
>
> ma conf xorg :
>
> # /etc/X11/xorg.conf (xorg X Window System server configuration file)
> #
> # This file was generated by dexconf, the Debian X Configuration tool,
> using
> # values from the debconf database.
> #
> # Edit this file with caution, and see the /etc/X11/xorg.conf manual
> page.
> # (Type "man /etc/X11/xorg.conf" at the shell prompt.)
> #
> # This file is automatically updated on xserver-xorg package upgrades
> *only*
> # if it has not been modified since the last upgrade of the xserver-xorg
> # package.
> #
> # If you have edited this file but would like it to be automatically
> updated
> # again, run the following command:
> # sudo dpkg-reconfigure -phigh xserver-xorg
>
> Section "Files"
> FontPath "/usr/share/X11/fonts/misc"
> # FontPath "/usr/share/X11/fonts/cyrillic"
> FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/share/X11/fonts/Type1"
> FontPath "/usr/share/X11/fonts/100dpi"
> FontPath "/usr/share/X11/fonts/75dpi"
> # path to defoma fonts
> FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> EndSection
>
> Section "Module"
> Load "bitmap"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "type1"
> Load "vbe"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "kbd"
> Option "CoreKeyboard"
> Option "XkbRules" "xorg"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "fr"
> Option "XkbVariant" "latin9"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ExplorerPS/2"
> Option "ZAxisMapping" "4 5"
> Option "Emulate3Buttons" "true"
> EndSection
>
> Section "InputDevice"
> Identifier "Synaptics Touchpad"
> Driver "synaptics"
> Option "SHMConfig" "true"
> Option "SendCoreEvents" "true"
> Option "Device" "/dev/psaux"
> Option "Protocol" "auto-dev"
> Option "HorizScrollDelta" "0"
> EndSection
>
>
> Section "Device"
> Identifier "Intel Corporation Mobile 915GM/GMS/910GML
> Express Graphics
> Controller"
> Driver "i810"
> VideoRam 243944
> BusID "PCI:0:2:0"
> Option "ForceBIOS" "1024x768=1280x768"
> EndSection
>
> Section "Monitor"
> Identifier "Asus W5F LCD"
> HorizSync 31.5 - 82.0
> VertRefresh 60
> ModeLine "1280x768" 80.14 1280 1344 1480 1680 768 769 772
> 795 -HSync +Vsync
> Option "dpms"
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "Intel Corporation Mobile 915GM/GMS/910GML
> Express Graphics
> Controller"
> Monitor "Asus W5F LCD"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> Modes "1280x768" "1024x768" "800x600"
> "640x480"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> InputDevice "Synaptics Touchpad"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
> Le fichier 915resolution :
>
> #
> # 915resolution default
> #
> # find free modes by /usr/sbin/915resolution -l
> # and set it to MODE or set to 'MODE=auto'
> #
> # With 'auto' detection, the panel-size will be fetched from the VBE
> # BIOS if possible and the highest-numbered mode in each bit-depth
> # will be overwritten with the detected panel-size.
> MODE=62
> #
> # and set resolutions for the mode.
> #
> XRESO=1280
> YRESO=768
> #
> # We can also set the pixel mode.
> # Please note that this is optional,
> # you can also leave this value blank.
> BIT=32
>
> le 915resolution -l :
> Intel 800/900 Series VBIOS Hack : version 0.5.2
>
> Chipset: 915GM
> BIOS: TYPE 1
> Mode Table Offset: $C0000 + $269
> Mode Table Entries: 36
>
> Mode 30 : 640x480, 8 bits/pixel
> Mode 32 : 800x600, 8 bits/pixel
> Mode 34 : 1024x768, 8 bits/pixel
> Mode 38 : 1280x1024, 8 bits/pixel
> Mode 3a : 1600x1200, 8 bits/pixel
> Mode 3c : 1920x1440, 8 bits/pixel
> Mode 41 : 640x480, 16 bits/pixel
> Mode 43 : 800x600, 16 bits/pixel
> Mode 45 : 1024x768, 16 bits/pixel
> Mode 49 : 1280x1024, 16 bits/pixel
> Mode 4b : 1600x1200, 16 bits/pixel
> Mode 4d : 1920x1440, 16 bits/pixel
> Mode 50 : 640x480, 32 bits/pixel
> Mode 52 : 800x600, 32 bits/pixel
> Mode 54 : 1024x768, 32 bits/pixel
> Mode 58 : 1280x1024, 32 bits/pixel
> Mode 5a : 1600x1200, 32 bits/pixel
> Mode 5c : 1920x1440, 32 bits/pixel
> Mode 60 : 1280x768, 8 bits/pixel
> Mode 61 : 1280x768, 16 bits/pixel
> Mode 62 : 1280x768, 32 bits/pixel
>
> les log xorg :
>
>
> X Window System Version 7.0.0
> Release Date: 21 December 2005
> X Protocol Version 11, Revision 0, Release 7.0
> Build Operating System:Linux 2.6.12 i686
> Current Operating System: Linux pnoel-as 2.6.15-23-386 #1 PREEMPT Tue
> May 23 13:49:40 UTC 2006 i686
> Build Date: 16 March 2006
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 2 10:27:25 2006
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Asus W5F LCD"
> (**) | |-->Device "Intel Corporation Mobile 915GM/GMS/910GML Express
> Graphics Controller"
> (**) |-->Input Device "Generic Keyboard"
> (**) |-->Input Device "Configured Mouse"
> (**) |-->Input Device "Synaptics Touchpad"
> (**) FontPath set to
> "/usr/share/X11/fonts/misc,/usr/share/X11/fonts/100dpi/:unscaled,/usr/share/X11/fonts/75dpi/:unscaled,/usr/share/X11/fonts/Type1,/usr/share/X11/fonts/100dpi,/usr/share/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> (==) RgbPath set to "/etc/X11/rgb"
> (==) ModulePath set to "/usr/lib/xorg/modules"
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.2
> X.Org Video Driver: 0.8
> X.Org XInput driver : 0.5
> X.Org Server Extension : 0.2
> X.Org Font Renderer : 0.4
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
> (II) Module bitmap: vendor="X.Org Foundation"
> compiled for 7.0.0, module version = 1.0.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/lib/xorg/modules/libpcidata.so
> (II) Module pcidata: vendor="X.Org Foundation"
> compiled for 7.0.0, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.8
> ...
>
> II) I810: Driver for Intel Integrated Graphics Chipsets: i810,
> i810-dc100,
> i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
> 915GM, 945G, 945GM
> (II) Primary Device is: PCI 00:02:0
> (WW) I810: No matching Device section for instance (BusID PCI:0:2:1)
> found
> (--) Chipset 915GM found
>
> ....
>
> (II) Loading /usr/lib/xorg/modules/libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 7.0.0, module version = 0.1.0
> ABI class: X.Org Video Driver, version 0.8
> (**) I810(0): Depth 24, (--) framebuffer bpp 32
> (==) I810(0): RGB weight 888
> (==) I810(0): Default visual is TrueColor
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/lib/xorg/modules/libint10.so
> (II) I810(0): initializing int10
> (WW) I810(0): Bad V_BIOS checksum
> (II) I810(0): Primary V_BIOS segment is: 0xc000
> (II) I810(0): VESA BIOS detected
> (II) I810(0): VESA VBE Version 3.0
> (II) I810(0): VESA VBE Total Mem: 16064 kB
> (II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip
> Accelerated VGA BIOS
> (II) I810(0): VESA VBE OEM Software Rev: 1.0
> (II) I810(0): VESA VBE OEM Vendor: Intel Corporation
> (II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics
> Controller
> (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
> (II) I810(0): Integrated Graphics Chipset: Intel(R) 915GM
> (--) I810(0): Chipset: "915GM"
> (--) I810(0): Linear framebuffer at 0xD0000000
>
> .....
>
>
> (WW) I810(0): config file hsync range 31.5-82kHz not within DDC hsync
> ranges.
> (II) I810(0): Asus W5F LCD: Using hsync range of 31.50-82.00 kHz
> (II) I810(0): Asus W5F LCD: Using vrefresh value of 60.00 Hz
> (II) I810(0): Not using mode "1280x768" (no mode of this name)
> (--) I810(0): Virtual size is 1024x768 (pitch 1024)
> (**) I810(0): *Built-in mode "1024x768"
> (**) I810(0): *Built-in mode "800x600"
> (**) I810(0): *Built-in mode "640x480"
> (--) I810(0): Display dimensions: (260, 160) mm
> (--) I810(0): DPI set to (100, 121)
>
> ....
>
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/lib/xorg/modules/libint10.so
> (II) I810(0): initializing int10
> (WW) I810(0): Bad V_BIOS checksum
> (II) I810(0): Primary V_BIOS segment is: 0xc000
> (II) I810(0): VESA BIOS detected
> (II) I810(0): VESA VBE Version 3.0
> (II) I810(0): VESA VBE Total Mem: 16064 kB
> (II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip
> Accelerated VGA BIOS
> (II) I810(0): VESA VBE OEM Software Rev: 1.0
> (II) I810(0): VESA VBE OEM Vendor: Intel Corporation
> (II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics
> Controller
> (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
> (II) I810(0): Allocated 128 kB for the ring buffer at 0x0
> (II) I810(0): Allocating at least 512 scanlines for pixmap cache
> (II) I810(0): Initial framebuffer allocation size: 5120 kByte
> (II) I810(0): Allocated 4 kB for HW cursor at 0xffff000 (0x37bed000)
> (II) I810(0): Allocated 16 kB for HW (ARGB) cursor at 0xfffb000
> (0x01a00000)
> (II) I810(0): Allocated 4 kB for Overlay registers at 0xfffa000
> (0x37416000).
> (II) I810(0): Allocated 64 kB for the scratch buffer at 0xff
>
> ....
>
> II) I810(0): [dri] visual configs initialized
> (II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (WW) I810(0): Extended BIOS function 0x5f05 failed.
> (II) I810(0): xf86BindGARTMemory: bind key 7 at 0x00fbf000 (pgoffset
> 4031)
> (II) I810(0): xf86BindGARTMemory: bind key 0 at 0x0ffff000 (pgoffset
> 65535)
> (II) I810(0): xf86BindGARTMemory: bind key 1 at 0x0fffb000 (pgoffset
> 65531)
> (II) I810(0): xf86BindGARTMemory: bind key 3 at 0x0ffea000 (pgoffset
> 65514)
> (II) I810(0): xf86BindGARTMemory: bind key 2 at 0x0fffa000 (pgoffset
> 65530)
> (II) I810(0): xf86BindGARTMemory: bind key 4 at 0x0f800000 (pgoffset
> 63488)
> (II) I810(0): xf86BindGARTMemory: bind key 5 at 0x0f400000 (pgoffset
> 62464)
> (II) I810(0): xf86BindGARTMemory: bind key 6 at 0x0f3f8000 (pgoffset
> 62456)
> (II) I810(0): Display plane A is disabled and connected to Pipe A.
> (II) I810(0): Display plane B is enabled and connected to Pipe B.
> (II) I810(0): Enabling plane B.
> (II) I810(0): Display plane A is now disabled and connected to Pipe A.
> (II) I810(0): Display plane B is now enabled and connected to Pipe B.
> (II) I810(0): PIPEACONF is 0x00000000
> (II) I810(0): PIPEBCONF is 0x80000000
> (II) I810(0): Mode bandwidth is 47 Mpixel/s
> (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 252
> Mbyte/s, 0 Mbyte/s
> (II) I810(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> Indirect CPU to Screen color expansion
> Solid Horizontal and Vertical Lines
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 20 128x128 slots
> 5 256x256 slots
> (==) I810(0): Backing store disabled
> (==) I810(0): Silken mouse enabled
> (II) I810(0): Initializing HW Cursor
> (**) Option "dpms"
> (**) I810(0): DPMS enabled
> (II) I810(0): X context handle = 0x1
> (II) I810(0): [drm] installed DRM signal handler
> (II) I810(0): [DRI] installation complete
> (II) I810(0): direct rendering: Enabled
> (WW) I810(0): Option "ForceBIOS" is not used
> (==) RandR enabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> (**) Option "CoreKeyboard"
>
>
>
>
>
> Le vendredi 02 juin 2006 à 10:20 +0200, Jonathan Loriaux a écrit :
> > Le jeudi 01 juin 2006 à 22:03 +0200, Patrick Noel a écrit :
> > > Bonjour,
> > >
> > > Je viens de passer à Dapper et j'ai un pb d'affichage widescreen sur mon
> > > portable je n'arrive pas à passer en 1280x768
> >
> > Est-ce que ton fichier /etc/default/915resolution est bien configuré ?
> > (le nom du fichier de configuration a changé dans dapper, avec on
> > utilisait 810resolution et là, on est passé à 915resolution)
> >
> > Chez moi :
> > #
> > # 915resolution default
> > #
> > # find free modes by /usr/sbin/915resolution -l
> > # and set it to MODE or set to 'MODE=auto'
> > #
> > # With 'auto' detection, the panel-size will be fetched from the VBE
> > # BIOS if possible and the highest-numbered mode in each bit-depth
> > # will be overwritten with the detected panel-size.
> > MODE=5c
> > #
> > # and set resolutions for the mode.
> > #
> > XRESO=1280
> > YRESO=768
> > #
> > # We can also set the pixel mode.
> > # Please note that this is optional,
> > # you can also leave this value blank.
> > BIT=32
> >
> > Ensuite, soit on redémarre toute la machine, soit un petit coup de
> > sudo /etc/init.d/915resolution restart
> > et puis de
> > sudo /etc/ini.d/gdm restart
> >
> > Je pense qu'il est possible que cela fonctionne.
> >
> > Bonne journée.
> >
> > Jonathan
> > --
> > ubuntu-fr mailing list
> > ubuntu-fr at lists.ubuntu.com
> > https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
>
>
Plus d'informations sur la liste de diffusion ubuntu-fr