probleme Dapper affichage 1280x768 carte i810

Patrick Noël patrick.noel at argus-presse.fr
Ven 2 Juin 08:51:23 UTC 2006


j'ai réinstallé 915resolution et le driver i810 mais c'est toujours en
1024x768.

ma conf xorg :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual
page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        FontPath        "/usr/share/X11/fonts/misc"
#       FontPath        "/usr/share/X11/fonts/cyrillic"
        FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/Type1"
        FontPath        "/usr/share/X11/fonts/100dpi"
        FontPath        "/usr/share/X11/fonts/75dpi"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "type1"
        Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "fr"
        Option          "XkbVariant"    "latin9"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ExplorerPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SHMConfig"             "true"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option          "HorizScrollDelta"      "0"
EndSection


Section "Device"
        Identifier      "Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics
Controller"
        Driver          "i810"
        VideoRam        243944
        BusID           "PCI:0:2:0"
        Option "ForceBIOS" "1024x768=1280x768"
EndSection

Section "Monitor"
        Identifier      "Asus W5F LCD"
        HorizSync       31.5 - 82.0
        VertRefresh     60
        ModeLine        "1280x768" 80.14 1280 1344 1480 1680 768 769 772
795 -HSync +Vsync
        Option          "dpms"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics
Controller"
        Monitor         "Asus W5F LCD"
        DefaultDepth    24      
        SubSection "Display"
                Depth           24
                Modes           "1280x768" "1024x768" "800x600"
"640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "Synaptics Touchpad"
EndSection

Section "DRI"
        Mode    0666
EndSection

Le fichier 915resolution :

#
# 915resolution default
#
# find free modes by  /usr/sbin/915resolution -l
# and set it to MODE or set to 'MODE=auto'
#
# With 'auto' detection, the panel-size will be fetched from the VBE
# BIOS if possible and the highest-numbered mode in each bit-depth
# will be overwritten with the detected panel-size.
MODE=62
#
# and set resolutions for the mode.
#
XRESO=1280
YRESO=768
#
# We can also set the pixel mode.
# Please note that this is optional,
# you can also leave this value blank.
BIT=32

le 915resolution -l :
Intel 800/900 Series VBIOS Hack : version 0.5.2

Chipset: 915GM
BIOS: TYPE 1
Mode Table Offset: $C0000 + $269
Mode Table Entries: 36

Mode 30 : 640x480, 8 bits/pixel
Mode 32 : 800x600, 8 bits/pixel
Mode 34 : 1024x768, 8 bits/pixel
Mode 38 : 1280x1024, 8 bits/pixel
Mode 3a : 1600x1200, 8 bits/pixel
Mode 3c : 1920x1440, 8 bits/pixel
Mode 41 : 640x480, 16 bits/pixel
Mode 43 : 800x600, 16 bits/pixel
Mode 45 : 1024x768, 16 bits/pixel
Mode 49 : 1280x1024, 16 bits/pixel
Mode 4b : 1600x1200, 16 bits/pixel
Mode 4d : 1920x1440, 16 bits/pixel
Mode 50 : 640x480, 32 bits/pixel
Mode 52 : 800x600, 32 bits/pixel
Mode 54 : 1024x768, 32 bits/pixel
Mode 58 : 1280x1024, 32 bits/pixel
Mode 5a : 1600x1200, 32 bits/pixel
Mode 5c : 1920x1440, 32 bits/pixel
Mode 60 : 1280x768, 8 bits/pixel
Mode 61 : 1280x768, 16 bits/pixel
Mode 62 : 1280x768, 32 bits/pixel

les log xorg :


X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.12 i686
Current Operating System: Linux pnoel-as 2.6.15-23-386 #1 PREEMPT Tue
May 23 13:49:40 UTC 2006 i686
Build Date: 16 March 2006
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun  2 10:27:25 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Asus W5F LCD"
(**) |   |-->Device "Intel Corporation Mobile 915GM/GMS/910GML Express
Graphics Controller"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Synaptics Touchpad"
(**) FontPath set to
"/usr/share/X11/fonts/misc,/usr/share/X11/fonts/100dpi/:unscaled,/usr/share/X11/fonts/75dpi/:unscaled,/usr/share/X11/fonts/Type1,/usr/share/X11/fonts/100dpi,/usr/share/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.2
        X.Org Video Driver: 0.8
        X.Org XInput driver : 0.5
        X.Org Server Extension : 0.2
        X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.8
...

II) I810: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100,
	i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
	915GM, 945G, 945GM
(II) Primary Device is: PCI 00:02:0
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1)
found
(--) Chipset 915GM found

....

(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.8
(**) I810(0): Depth 24, (--) framebuffer bpp 32
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 16064 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip
Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics
Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) I810(0): Chipset: "915GM"
(--) I810(0): Linear framebuffer at 0xD0000000

.....


(WW) I810(0): config file hsync range 31.5-82kHz not within DDC hsync
ranges.
(II) I810(0): Asus W5F LCD: Using hsync range of 31.50-82.00 kHz
(II) I810(0): Asus W5F LCD: Using vrefresh value of 60.00 Hz
(II) I810(0): Not using mode "1280x768" (no mode of this name)
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): *Built-in mode "1024x768"
(**) I810(0): *Built-in mode "800x600"
(**) I810(0): *Built-in mode "640x480"
(--) I810(0): Display dimensions: (260, 160) mm
(--) I810(0): DPI set to (100, 121)

....

(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 16064 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip
Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics
Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Allocated 128 kB for the ring buffer at 0x0
(II) I810(0): Allocating at least 512 scanlines for pixmap cache
(II) I810(0): Initial framebuffer allocation size: 5120 kByte
(II) I810(0): Allocated 4 kB for HW cursor at 0xffff000 (0x37bed000)
(II) I810(0): Allocated 16 kB for HW (ARGB) cursor at 0xfffb000
(0x01a00000)
(II) I810(0): Allocated 4 kB for Overlay registers at 0xfffa000
(0x37416000).
(II) I810(0): Allocated 64 kB for the scratch buffer at 0xff

....

II) I810(0): [dri] visual configs initialized
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(WW) I810(0): Extended BIOS function 0x5f05 failed.
(II) I810(0): xf86BindGARTMemory: bind key 7 at 0x00fbf000 (pgoffset
4031)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x0ffff000 (pgoffset
65535)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x0fffb000 (pgoffset
65531)
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x0ffea000 (pgoffset
65514)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x0fffa000 (pgoffset
65530)
(II) I810(0): xf86BindGARTMemory: bind key 4 at 0x0f800000 (pgoffset
63488)
(II) I810(0): xf86BindGARTMemory: bind key 5 at 0x0f400000 (pgoffset
62464)
(II) I810(0): xf86BindGARTMemory: bind key 6 at 0x0f3f8000 (pgoffset
62456)
(II) I810(0): Display plane A is disabled and connected to Pipe A.
(II) I810(0): Display plane B is enabled and connected to Pipe B.
(II) I810(0): Enabling plane B.
(II) I810(0): Display plane A is now disabled and connected to Pipe A.
(II) I810(0): Display plane B is now enabled and connected to Pipe B.
(II) I810(0): PIPEACONF is 0x00000000
(II) I810(0): PIPEBCONF is 0x80000000
(II) I810(0): Mode bandwidth is 47 Mpixel/s
(II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 252
Mbyte/s, 0 Mbyte/s
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Horizontal and Vertical Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		20 128x128 slots
		5 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(II) I810(0): Initializing HW Cursor
(**) Option "dpms"
(**) I810(0): DPMS enabled
(II) I810(0): X context handle = 0x1
(II) I810(0): [drm] installed DRM signal handler
(II) I810(0): [DRI] installation complete
(II) I810(0): direct rendering: Enabled
(WW) I810(0): Option "ForceBIOS" is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"





Le vendredi 02 juin 2006 à 10:20 +0200, Jonathan Loriaux a écrit :
> Le jeudi 01 juin 2006 à 22:03 +0200, Patrick Noel a écrit :
> > Bonjour,
> > 
> > Je viens de passer à Dapper et j'ai un pb d'affichage widescreen sur mon
> > portable je n'arrive pas à passer en 1280x768
> 
> Est-ce que ton fichier /etc/default/915resolution est bien configuré ?
> (le nom du fichier de configuration a changé dans dapper, avec on
> utilisait 810resolution et là, on est passé à 915resolution)
> 
> Chez moi :
> #
> # 915resolution default
> #
> # find free modes by  /usr/sbin/915resolution -l
> # and set it to MODE or set to 'MODE=auto'
> #
> # With 'auto' detection, the panel-size will be fetched from the VBE
> # BIOS if possible and the highest-numbered mode in each bit-depth
> # will be overwritten with the detected panel-size.
> MODE=5c
> #
> # and set resolutions for the mode.
> #
> XRESO=1280
> YRESO=768
> #
> # We can also set the pixel mode.
> # Please note that this is optional,
> # you can also leave this value blank.
> BIT=32
> 
> Ensuite, soit on redémarre toute la machine, soit un petit coup de 
> sudo /etc/init.d/915resolution restart
> et puis de
> sudo /etc/ini.d/gdm restart
> 
> Je pense qu'il est possible que cela fonctionne.
> 
> Bonne journée.
> 
> Jonathan
> -- 
> ubuntu-fr mailing list
> ubuntu-fr at lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr





Plus d'informations sur la liste de diffusion ubuntu-fr