Se cuelga el 10.04 64 bit
David
dreyesg79 en yahoo.es
Dom Ago 1 17:56:23 BST 2010
--- El dom, 1/8/10, Cosme Domínguez Díaz <cosme.ddiaz en gmail.com> escribió:
> De: Cosme Domínguez Díaz <cosme.ddiaz en gmail.com>
> Asunto: Re: Se cuelga el 10.04 64 bit
> Para: "David" <dreyesg79 en yahoo.es>
> CC: "Ubuntu" <ubuntu-es en lists.ubuntu.com>
> Fecha: domingo, 1 de agosto, 2010 18:26
> El día 1 de agosto de 2010 18:19,
> David <dreyesg79 en yahoo.es>
> escribió:
> > He instalado Ubuntu 10.04 64bits en un Core 2 Duo,
> > 8 GB de ram
> > Nvidia GT 220 con 1 GB de memoria
> >
> > Con mucha frecuencia cuando llevo 30min o más se
> queda colgado, el ratón se mueve pero no funciona nada, me
> ve obligado a apagar el pc pulsando el reset, ¿Dónde miro
> cuál puede ser la causa del problema? Y ¿como lo
> resuelvo?
>
> Echa un vistazo a los ficheros dmesg del directorio
> /var/log a ver si
> han registrado algún error, el cua debería está al final
> del fichero
> de texto.
>
> Puedes hacer lo mismo con la herramienta "Visor de archivos
> de
> sucesos" de Sistema -> Administración
>
> > No he instalado los driver de Nvidea, he dejado los
> que trae por defecto ya que me funciona bien
>
> Pues en tu caso deberías instalar los oficiales de Nvidia
> ya que tu
> tarjeta gráfica es demasiado nueva para el controlador
> libre Noveau
> que trae por defecto Ubuntu.
>
Aquí os envio el final d /var/dmesg, a ver si me sabei decir cual pueda ser la causa del cuelgue
Un saludo
David
[ 0.330136] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]
[ 0.330140] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]
[ 0.330187] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.330194] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.330201] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xce000000-0xcfffffff]
[ 0.330205] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.330210] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe800000-0xfe87ffff]
[ 0.330256] pci 0000:01:00.1: reg 10 32bit mmio: [0xfe8fc000-0xfe8fffff]
[ 0.330326] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.330328] pci 0000:00:01.0: bridge 32bit mmio: [0xfd000000-0xfe8fffff]
[ 0.330331] pci 0000:00:01.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff]
[ 0.330367] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfbf00000-0xfbffffff]
[ 0.330418] pci 0000:03:00.0: reg 10 io port: [0xec00-0xec07]
[ 0.330426] pci 0000:03:00.0: reg 14 io port: [0xe880-0xe883]
[ 0.330434] pci 0000:03:00.0: reg 18 io port: [0xe800-0xe807]
[ 0.330442] pci 0000:03:00.0: reg 1c io port: [0xe480-0xe483]
[ 0.330450] pci 0000:03:00.0: reg 20 io port: [0xe400-0xe40f]
[ 0.330464] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfeaf0000-0xfeafffff]
[ 0.330540] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.330543] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.330586] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.330604] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfbeff000-0xfbefffff]
[ 0.330616] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfbee0000-0xfbeeffff]
[ 0.330623] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfe9f0000-0xfe9fffff]
[ 0.330659] pci 0000:02:00.0: supports D1 D2
[ 0.330660] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330664] pci 0000:02:00.0: PME# disabled
[ 0.330712] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.330715] pci 0000:00:1c.2: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.330720] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfbe00000-0xfbefffff]
[ 0.330750] pci 0000:05:01.0: reg 10 32bit mmio: [0xfebf0000-0xfebfffff]
[ 0.330828] pci 0000:00:1e.0: transparent bridge
[ 0.330833] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.330857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.330962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.331006] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.331084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.331130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.331197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.344397] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.344488] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.344575] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.344663] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.344751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.344840] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.344932] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.345020] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.345123] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.345126] vgaarb: loaded
[ 0.345210] SCSI subsystem initialized
[ 0.345293] libata version 3.00 loaded.
[ 0.345352] usbcore: registered new interface driver usbfs
[ 0.345360] usbcore: registered new interface driver hub
[ 0.345381] usbcore: registered new device driver usb
[ 0.345478] ACPI: WMI: Mapper loaded
[ 0.345480] PCI: Using ACPI for IRQ routing
[ 0.345625] NetLabel: Initializing
[ 0.345627] NetLabel: domain hash size = 128
[ 0.345628] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.345639] NetLabel: unlabeled traffic allowed by default
[ 0.345668] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.345672] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.350024] Switching to clocksource tsc
[ 0.351374] AppArmor: AppArmor Filesystem Enabled
[ 0.351391] pnp: PnP ACPI init
[ 0.351406] ACPI: bus type pnp registered
[ 0.354897] pnp: PnP ACPI: found 17 devices
[ 0.354898] ACPI: ACPI bus type pnp unregistered
[ 0.354909] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.354915] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.354919] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.354921] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.354923] system 00:09: ioport range 0x500-0x57f has been reserved
[ 0.354925] system 00:09: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.354927] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.354929] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.354931] system 00:09: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.354938] system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.354942] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.354944] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.354950] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.354954] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[ 0.354956] system 00:10: iomem range 0xc0000-0xcffff has been reserved
[ 0.354958] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[ 0.354960] system 00:10: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.359653] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.359656] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.359659] pci 0000:00:01.0: MEM window: 0xfd000000-0xfe8fffff
[ 0.359662] pci 0000:00:01.0: PREFETCH window: 0x000000ce000000-0x000000dfffffff
[ 0.359665] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.359668] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.359692] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc03fffff
[ 0.359695] pci 0000:00:1c.0: PREFETCH window: 0x000000fbf00000-0x000000fbffffff
[ 0.359700] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.359702] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.359705] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff
[ 0.359708] pci 0000:00:1c.1: PREFETCH window: 0x000000c0400000-0x000000c05fffff
[ 0.359713] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[ 0.359715] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.359719] pci 0000:00:1c.2: MEM window: 0xfe900000-0xfe9fffff
[ 0.359722] pci 0000:00:1c.2: PREFETCH window: 0x000000fbe00000-0x000000fbefffff
[ 0.359727] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.359728] pci 0000:00:1e.0: IO window: disabled
[ 0.359731] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.359734] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.359747] alloc irq_desc for 16 on node -1
[ 0.359748] alloc kstat_irqs on node -1
[ 0.359753] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.359756] pci 0000:00:01.0: setting latency timer to 64
[ 0.359762] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.359765] alloc irq_desc for 17 on node -1
[ 0.359766] alloc kstat_irqs on node -1
[ 0.359768] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.359771] pci 0000:00:1c.0: setting latency timer to 64
[ 0.359778] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.359781] pci 0000:00:1c.1: setting latency timer to 64
[ 0.359786] alloc irq_desc for 18 on node -1
[ 0.359787] alloc kstat_irqs on node -1
[ 0.359789] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.359793] pci 0000:00:1c.2: setting latency timer to 64
[ 0.359798] pci 0000:00:1e.0: setting latency timer to 64
[ 0.359802] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.359804] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.359806] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.359807] pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfe8fffff]
[ 0.359809] pci_bus 0000:01: resource 2 pref mem [0xce000000-0xdfffffff]
[ 0.359811] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.359812] pci_bus 0000:04: resource 1 mem: [0xc0000000-0xc03fffff]
[ 0.359814] pci_bus 0000:04: resource 2 pref mem [0xfbf00000-0xfbffffff]
[ 0.359816] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.359817] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.359819] pci_bus 0000:03: resource 2 pref mem [0xc0400000-0xc05fffff]
[ 0.359820] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.359822] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.359823] pci_bus 0000:02: resource 2 pref mem [0xfbe00000-0xfbefffff]
[ 0.359825] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.359827] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.359828] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.359858] NET: Registered protocol family 2
[ 0.360051] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.361309] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.365056] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.365529] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.365531] TCP reno registered
[ 0.365657] NET: Registered protocol family 1
[ 0.365820] pci 0000:01:00.0: Boot video device
[ 0.366010] Scanning for low memory corruption every 60 seconds
[ 0.366129] audit: initializing netlink socket (disabled)
[ 0.366142] type=2000 audit(1280686215.359:1): initialized
[ 0.373383] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.374380] VFS: Disk quotas dquot_6.5.2
[ 0.374421] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.374836] fuse init (API version 7.13)
[ 0.374895] msgmni has been set to 15991
[ 0.375052] alg: No test for stdrng (krng)
[ 0.375088] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.375091] io scheduler noop registered
[ 0.375092] io scheduler anticipatory registered
[ 0.375093] io scheduler deadline registered
[ 0.375119] io scheduler cfq registered (default)
[ 0.375231] alloc irq_desc for 24 on node -1
[ 0.375233] alloc kstat_irqs on node -1
[ 0.375240] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.375245] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.375319] alloc irq_desc for 25 on node -1
[ 0.375320] alloc kstat_irqs on node -1
[ 0.375325] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.375331] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.375416] alloc irq_desc for 26 on node -1
[ 0.375417] alloc kstat_irqs on node -1
[ 0.375422] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.375428] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.375516] alloc irq_desc for 27 on node -1
[ 0.375518] alloc kstat_irqs on node -1
[ 0.375523] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.375528] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.375592] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.375670] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.375764] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.375767] ACPI: Power Button [PWRB]
[ 0.375801] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.375803] ACPI: Power Button [PWRF]
[ 0.376398] ACPI: SSDT 00000000bff8e0d0 002FB (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.376620] processor LNXCPU:00: registered as cooling_device0
[ 0.376978] ACPI: SSDT 00000000bff8e3d0 002FB (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.377187] processor LNXCPU:01: registered as cooling_device1
[ 0.380421] Linux agpgart interface v0.103
[ 0.380447] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.380538] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.380821] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.381550] brd: module loaded
[ 0.381887] loop: module loaded
[ 0.381942] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.382018] ata_piix 0000:00:1f.2: version 2.13
[ 0.382032] alloc irq_desc for 19 on node -1
[ 0.382033] alloc kstat_irqs on node -1
[ 0.382039] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.382042] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.382077] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.382146] scsi0 : ata_piix
[ 0.382196] scsi1 : ata_piix
[ 0.383219] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.383223] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.383240] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.383243] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.383271] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.383298] scsi2 : ata_piix
[ 0.383335] scsi3 : ata_piix
[ 0.384393] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.384396] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.384441] pata_acpi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.384469] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 0.384480] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 0.384676] Fixed MDIO Bus: probed
[ 0.384700] PPP generic driver version 2.4.2
[ 0.384729] tun: Universal TUN/TAP device driver, 1.6
[ 0.384731] tun: (C) 1999-2004 Max Krasnyansky <maxk en qualcomm.com>
[ 0.384796] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.384809] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.384828] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.384830] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.384852] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.384876] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.388768] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.388783] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfcfffc00
[ 0.409697] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.409812] usb usb1: configuration #1 chosen from 1 choice
[ 0.409833] hub 1-0:1.0: USB hub found
[ 0.409841] hub 1-0:1.0: 6 ports detected
[ 0.409899] alloc irq_desc for 23 on node -1
[ 0.409901] alloc kstat_irqs on node -1
[ 0.409906] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.409928] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.409931] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.409962] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.409985] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.413855] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.413869] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfcfff800
[ 0.429687] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.429797] usb usb2: configuration #1 chosen from 1 choice
[ 0.429823] hub 2-0:1.0: USB hub found
[ 0.429831] hub 2-0:1.0: 6 ports detected
[ 0.429881] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.429899] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.429937] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.429945] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.429948] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.429976] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.430009] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.430073] usb usb3: configuration #1 chosen from 1 choice
[ 0.430091] hub 3-0:1.0: USB hub found
[ 0.430097] hub 3-0:1.0: 2 ports detected
[ 0.430128] alloc irq_desc for 21 on node -1
[ 0.430129] alloc kstat_irqs on node -1
[ 0.430134] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.430138] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.430140] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.430167] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.430191] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.430254] usb usb4: configuration #1 chosen from 1 choice
[ 0.430274] hub 4-0:1.0: USB hub found
[ 0.430278] hub 4-0:1.0: 2 ports detected
[ 0.430308] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.430312] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.430315] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.430341] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.430361] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.430419] usb usb5: configuration #1 chosen from 1 choice
[ 0.430438] hub 5-0:1.0: USB hub found
[ 0.430442] hub 5-0:1.0: 2 ports detected
[ 0.430479] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.430483] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.430486] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.430515] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.430534] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.430592] usb usb6: configuration #1 chosen from 1 choice
[ 0.430608] hub 6-0:1.0: USB hub found
[ 0.430612] hub 6-0:1.0: 2 ports detected
[ 0.430644] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.430649] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.430651] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.430675] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.430696] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.430754] usb usb7: configuration #1 chosen from 1 choice
[ 0.430770] hub 7-0:1.0: USB hub found
[ 0.430776] hub 7-0:1.0: 2 ports detected
[ 0.430808] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.430812] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.430814] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.430833] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.430852] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.430913] usb usb8: configuration #1 chosen from 1 choice
[ 0.430929] hub 8-0:1.0: USB hub found
[ 0.430933] hub 8-0:1.0: 2 ports detected
[ 0.431006] PNP: No PS/2 controller found. Probing ports directly.
[ 0.433786] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.433791] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.433883] mice: PS/2 mouse device common for all mice
[ 0.433965] rtc_cmos 00:03: RTC can wake from S4
[ 0.433995] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.434016] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.434113] device-mapper: uevent: version 1.0.3
[ 0.434197] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel en redhat.com
[ 0.434246] device-mapper: multipath: version 1.1.0 loaded
[ 0.434249] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.434353] cpuidle: using governor ladder
[ 0.434355] cpuidle: using governor menu
[ 0.434598] TCP cubic registered
[ 0.434684] NET: Registered protocol family 10
[ 0.435004] lo: Disabled Privacy Extensions
[ 0.435194] NET: Registered protocol family 17
[ 0.435731] PM: Resume from disk failed.
[ 0.435744] registered taskstats version 1
[ 0.436119] Magic number: 6:611:189
[ 0.436172] acpi device:1b: hash matches
[ 0.436207] rtc_cmos 00:03: setting system clock to 2010-08-01 18:10:15 UTC (1280686215)
[ 0.436209] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.436210] EDD information not available.
[ 0.437617] Freeing initrd memory: 8141k freed
[ 0.729532] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.881820] usb 1-1: configuration #1 chosen from 1 choice
[ 0.899460] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.899584] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.947067] ata3.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 0.947070] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.947166] ata4.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 0.947170] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.026990] ata3.00: configured for UDMA/133
[ 1.027114] ata4.00: configured for UDMA/133
[ 1.100670] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 1.100681] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.400010] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 1.400069] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.400080] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.430192] ata2.01: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL02, max UDMA/100
[ 1.470215] ata2.01: configured for UDMA/100
[ 1.478776] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL02 PQ: 0 ANSI: 5
[ 1.500510] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.500514] Uniform CD-ROM driver Revision: 3.20
[ 1.500628] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 1.500690] sr 1:0:1:0: Attached scsi generic sg0 type 5
[ 1.500765] scsi 2:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 1.500844] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.500918] scsi 3:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 1.500985] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.501025] sd 3:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.501043] sd 2:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.501096] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.501097] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.501106] sd 2:0:0:0: [sda] Write Protect is off
[ 1.501108] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.501132] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.501168] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.501293] sda:
[ 1.501377] sdb: sda1 sda2 sda3 sda4 < unknown partition table
[ 1.520527] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.531316] sda5 sda6 sda7 >
[ 1.543306] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.543322] Freeing unused kernel memory: 880k freed
[ 1.543593] Write protecting the kernel read-only data: 7696k
[ 1.553337] udev: starting version 151
[ 1.587653] usb 6-1: configuration #1 chosen from 1 choice
[ 1.598654] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.598685] pata_jmicron 0000:03:00.0: setting latency timer to 64
[ 1.603189] scsi4 : pata_jmicron
[ 1.610145] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.610165] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.610208] r8169 0000:02:00.0: setting latency timer to 64
[ 1.610247] alloc irq_desc for 28 on node -1
[ 1.610249] alloc kstat_irqs on node -1
[ 1.610261] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
[ 1.610667] eth0: RTL8168c/8111c at 0xffffc90000c76000, e0:cb:4e:3e:a2:f6, XID 1c4000c0 IRQ 28
[ 1.611178] scsi5 : pata_jmicron
[ 1.611938] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
[ 1.611940] ata6: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
[ 1.627749] Floppy drive(s): fd0 is 1.44M
[ 1.636422] Initializing USB Mass Storage driver...
[ 1.639650] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.641205] usbcore: registered new interface driver usb-storage
[ 1.641207] USB Mass Storage support registered.
[ 1.641384] usb-storage: device found at 2
[ 1.641385] usb-storage: waiting for device to settle before scanning
[ 1.643797] FDC 0 is a post-1991 82077
[ 1.870018] usb 8-1: new low speed USB device using uhci_hcd and address 2
[ 1.896686] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 2.041981] usb 8-1: configuration #1 chosen from 1 choice
[ 2.321267] usb 8-2: new low speed USB device using uhci_hcd and address 3
[ 2.578060] usb 8-2: configuration #1 chosen from 1 choice
[ 6.640234] usb-storage: device scan complete
[ 6.640832] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 6.641331] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 6.641830] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 6.642331] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 6.642638] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 6.642727] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 6.642801] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 6.642877] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 6.646069] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 6.646692] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 6.647323] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 6.647944] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 7.806065] udev: starting version 151
[ 7.854100] Adding 1052216k swap on /dev/sda5. Priority:-1 extents:1 across:1052216k
[ 7.971188] [drm] Initialized drm 1.1.0 20060810
[ 7.974155] type=1505 audit(1280679023.033:2): operation="profile_load" pid=619 name="/sbin/dhclient3"
[ 7.974612] type=1505 audit(1280679023.033:3): operation="profile_load" pid=619 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 7.974857] type=1505 audit(1280679023.033:4): operation="profile_load" pid=619 name="/usr/lib/connman/scripts/dhclient-script"
[ 8.012427] Bluetooth: Core ver 2.15
[ 8.022890] NET: Registered protocol family 31
[ 8.022892] Bluetooth: HCI device and connection manager initialized
[ 8.022895] Bluetooth: HCI socket layer initialized
[ 8.023967] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 8.024087] usbcore: registered new interface driver btusb
[ 8.024827] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.031446] rt2860 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.031639]
[ 8.031640]
[ 8.031640] === pAd = ffffc900118a6000, size = 627064 ===
[ 8.031641]
[ 8.031642] <-- RTMPAllocAdapterBlock, Status=0
[ 8.036003] parport_pc 00:07: reported by Plug and Play ACPI
[ 8.036118] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 8.077068] lp: driver loaded but no devices found
[ 8.081651] usbcore: registered new interface driver hiddev
[ 8.084245] ppdev: user-space parallel port driver
[ 8.094068] input: Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[ 8.094150] generic-usb 0003:04F3:0231.0001: input,hidraw0: USB HID v1.11 Mouse [Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 8.094899] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.094904] nouveau 0000:01:00.0: setting latency timer to 64
[ 8.104627] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5000a2)
[ 8.105246] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 8.158212] alloc irq_desc for 22 on node -1
[ 8.158214] alloc kstat_irqs on node -1
[ 8.158223] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.158285] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.159948] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4
[ 8.160019] generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.2-2/input0
[ 8.160182] lp0: using parport0 (interrupt-driven).
[ 8.192060] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 8.192064] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 8.192066] [drm] nouveau 0000:01:00.0: Bios version 70.16.39.00
[ 8.192067] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[ 8.192113] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 8.192115] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 8.192118] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 8.192120] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 8.192122] [drm] nouveau 0000:01:00.0: 1: 0x00002161: type 0x61 idx 1 tag 0x08
[ 8.192124] [drm] nouveau 0000:01:00.0: 2: 0x00000200: type 0x00 idx 2 tag 0xff
[ 8.192126] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000302 00020030
[ 8.192128] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00000000
[ 8.192129] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01032310 00000000
[ 8.192131] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02021362 00020010
[ 8.192138] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD770
[ 8.249924] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input5
[ 8.249994] generic-usb 0003:04D9:1503.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.2-2/input1
[ 8.250021] usbcore: registered new interface driver usbhid
[ 8.250023] usbhid: v2.6:USB HID core driver
[ 8.280022] [drm] nouveau 0000:01:00.0: 0xD9E9: Condition still not met after 20ms, skipping following opcodes
[ 8.310044] [drm] nouveau 0000:01:00.0: 0xD9ED: Condition still not met after 20ms, skipping following opcodes
[ 8.310075] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDBA0
[ 8.390038] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEA74
[ 8.390050] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEA96
[ 8.451617] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEC29
[ 8.451619] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEC8E
[ 8.480011] [drm] nouveau 0000:01:00.0: 0xD5D6: Condition still not met after 20ms, skipping following opcodes
[ 8.480021] [drm] nouveau 0000:01:00.0: 0xC138: parsing output script 0
[ 8.480024] [drm] nouveau 0000:01:00.0: 0xC138: parsing output script 0
[ 8.649592] [TTM] Zone kernel: Available graphics memory: 4098316 kiB.
[ 8.649594] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 8.649605] [drm] nouveau 0000:01:00.0: 1024 MiB VRAM
[ 8.665514] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 8.665601] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 8.665761] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 8.669309] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 8.669927] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 8.669929] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 8.669931] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 8.669932] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 8.669935] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 8.670062] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 8.670204] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 8.903033] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 9.000361] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x40250000, bo ffff8802274a2e00
[ 9.000432] fb0: nouveaufb frame buffer device
[ 9.000433] registered panic notifier
[ 9.000438] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 9.000475] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.000478] hda_intel: Disable MSI for Nvidia chipset
[ 9.000493] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 9.001845] vga16fb: initializing
[ 9.001848] vga16fb: mapped to 0xffff8800000a0000
[ 9.001851] vga16fb: not registering due to another framebuffer present
[ 9.009293] [drm] nouveau 0000:01:00.0: 0x7452: parsing clock script 0
[ 9.010423] Console: switching to colour frame buffer device 240x67
[ 9.082534] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 9.281103] r8169: eth0: link up
[ 9.281110] r8169: eth0: link up
[ 9.286848] RX DESC ffff8800bf834000 size = 2048
[ 9.287026] <-- RTMPAllocTxRxRingMemory, Status=0
[ 9.287099] type=1505 audit(1280679024.343:5): operation="profile_load" pid=1034 name="/usr/share/gdm/guest-session/Xsession"
[ 9.288213] type=1505 audit(1280679024.343:6): operation="profile_replace" pid=1035 name="/sbin/dhclient3"
[ 9.288673] type=1505 audit(1280679024.343:7): operation="profile_replace" pid=1035 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 9.288921] type=1505 audit(1280679024.343:8): operation="profile_replace" pid=1035 name="/usr/lib/connman/scripts/dhclient-script"
[ 9.290164] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 9.290167] 1. Phy Mode = 0
[ 9.290168] 2. Phy Mode = 0
[ 9.290902] type=1505 audit(1280679024.353:9): operation="profile_load" pid=1036 name="/usr/bin/evince"
[ 9.296691] type=1505 audit(1280679024.353:10): operation="profile_load" pid=1036 name="/usr/bin/evince-previewer"
[ 9.301716] type=1505 audit(1280679024.363:11): operation="profile_load" pid=1036 name="/usr/bin/evince-thumbnailer"
[ 9.302969] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 9.306879] 3. Phy Mode = 0
[ 9.329377] MCS Set = 00 00 00 00 00
[ 9.330936] <==== RTMPInitialize, Status=0
[ 9.330998] 0x1300 = 00073200
Más información sobre la lista de distribución ubuntu-es