configurar lirc

[Rene Vielma M]

Hola a todos

Tengo un  IBM/Lenovo t60 con Feisty y deseo configurar el dispositivo
infrarrojo FIR.
El dispositivo virtual trabaja bien ->

$ifconfig irda0
irda0     Link encap:IrLAP  HWaddr 34:44:fd:2e
          UP RUNNING NOARP  MTU:2048  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14441 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:8
          RX bytes:0 (0.0 b)  TX bytes:447671 (437.1 KiB)

Lugo pruebo:
$sudo lircd -d irda0

y crea el dispositivo ->
$ file /dev/lircd
/dev/lircd: socket

luego pruebo :
$sudo mode2 -d /dev/lircd
mode2: error opening /dev/lircd
mode2: No such device or address

supongo que se debe a que /dev/lircd es un socket

Algua idea ?

Adjunto info del dmesg:
.
.
[   19.840000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   19.844000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   19.848000] input: PC Speaker as /class/input/input4
[   19.888000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ;
irq 3 ; dma 3.
[   19.892000] nsc-ircc, chip->init
[   19.896000] nsc-ircc, Found chip at base=0x164e
[   19.900000] nsc-ircc, driver loaded (Dag Brattli)
[   19.904000] nsc_ircc_open(), can't get iobase of 0x2f8
[   19.908000] nsc-ircc, Found chip at base=0x164e
[   19.912000] nsc-ircc, driver loaded (Dag Brattli)
[   19.916000] nsc_ircc_open(), can't get iobase of 0x2f8
[   19.924000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]
[   19.924000] pnp: Device 00:0a disabled.
.
.
.
Luego:
.
.
[   35.048000] usbcore: registered new interface driver rt73
[   36.192000] ttyS1: LSR safety check engaged!
[   36.196000] ttyS1: LSR safety check engaged!
[   36.256000] pnp: Device 00:0a activated.
[   36.256000] serial8250: too much work for irq3
[   36.260000] serial8250: too much work for irq3
[   36.276000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ;
irq 3 ; dma 3.
[   36.276000] nsc-ircc, chip->init
[   36.276000] nsc-ircc, Found chip at base=0x164e
[   36.276000] nsc-ircc, driver loaded (Dag Brattli)
[   36.276000] IrDA: Registered device irda0
[   36.276000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[   37.632000] ACPI: AC Adapter [AC] (on-line)


gracias desde ya !

Saludos


-- 
-rvm r-m r-m
Linux User #416719  http://counter.li.org