[Ubuntu-BR] [HELP]Não enxergo micros da rede!!!
Alan
alanfrank69 em gmail.com
Quinta Junho 14 16:19:40 UTC 2007
Sim, uso o nautilus, quer dizer, tento usar...
Quanto ao serviço mensageir creio estar ativado, pois, o outro micro
quando ligo no linux ele enxerga todos (linux e windows)!
O que acho mais estranho eh que quando dou o comando "smbtree"
aparecem todos micros de todas as redes e todos seus diretórios
compartilhados, os quais consigo montar manualmente, mas no nautilus
NAAAAAAAADA! :-(
Em 14/06/07, Eduardo Gomes Jr.<eduardo em rio-tech.com.br> escreveu:
> Olha nóis de novu...
>
> Uma pergunta que ainda não te fiz: qual o aplicativo que vc está usando para
> navegar nos micros da rede?
> Nautilus?
>
> Atenciosamente
>
> Eduardo Gomes Junior - Tecnologia da Informação
> Rio-Tech Engenharia Eletrometalurgia e Projetos ltda
>
> ----- Original Message -----
> From: "Alan" <alanfrank69 em gmail.com>
> To: "Lista de discussão do LoCoTeam Brasileiro" <ubuntu-br em lists.ubuntu.com>
> Sent: Wednesday, June 13, 2007 9:05 PM
> Subject: Re: [Ubuntu-BR][HELP]Não enxergo micros da rede!!!
>
>
> Interessante, eu consigo montar um volume compartilhado em um micro
> WINDOWS manualmente, fiz isso:
>
> $sudo smbmount //GUSTAVO-PC/Jogos /mnt/jogos
>
> E o volume foi montado normalmente!
>
> Ou seja, parece estar tudo bem com meu samba.conf, afinal, todos
> micros windows podem me acessar e posso montar volumes deles
> manualmente, o negócio é fazer aparecer a rede em Locais > Rede, ficar
> montando tudo manualmente eh osso neh, ainda mais dependendo de quem
> for usar o micro, vai ser pouco pra ficar xingando o linux¬¬
>
>
> 2007/6/13, Alan <alanfrank69 em gmail.com>:
> > Fala, bacana! E aí?
> > Bom, achei estranho pq não tava achando nenhum dos micros em windows,
> > dae iniciei o outro no linux e consegui encontrá-lo pelo findsmb, o
> > mais estranho eh q o resultado do findsmb executado no outro pc com
> > linux também não enxerga o windows, mas indo em Locais>Rede o windows
> > aparece!
> >
> > resultado do findsmb:
> >
> > *=DMB
> > +=LMB
> > IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION
> > ---------------------------------------------------------------------
> > 192.168.1.8 ALAN-PC +[MSHOME] [Unix] [Samba 3.0.24]
> > 192.168.1.69 GUSTAVO-PC [MSHOME] [Unix] [Samba 3.0.24]
> >
> >
> > brigadão ae pela atenção!
> > 2007/6/13, Eduardo Gomes Jr. <eduardo em rio-tech.com.br>:
> > > Fala Sr Alan, tudo tranquilo?
> > >
> > > Vc, provavelmente está em um rede NetBIOS, certo?
> > > Vc consegue enxergar a galera usando o comando findsmb?
> > >
> > > # findsmb
> > >
> > > Se não aparecer o pessoal, verifique o firewall e o serviço mensageiro
> > > nos
> > > rWindow$ da vida...
> > > Normalmente é só isso.
> > >
> > > Outro detalhe: Vc consegue montar os dispositivos deles em sua máquina?
> > >
> > > #mount //<IP>/<compartilhamento> /mnt/<pasta> -t smbfs
> > >
> > > Vamo vê se a gente consegue matar o problema...
> > >
> > > Atenciosamente
> > >
> > > Eduardo Gomes Junior - Tecnologia da Informação
> > > Rio-Tech Engenharia Eletrometalurgia e Projetos ltda
> > >
> > > ----- Original Message -----
> > > From: "Alan" <alanfrank69 em gmail.com>
> > > To: <ubuntu-br em lists.ubuntu.com>
> > > Sent: Wednesday, June 13, 2007 12:44 AM
> > > Subject: [Ubuntu-BR] [HELP]Não enxergo micros da rede!!!
> > >
> > >
> > > Não consigo enxergar nenhum pc da rede!
> > >
> > > Minha rede é assim:
> > > ALAN-PC => Meu PC soh com UBUNTU
> > > GUSTAVO-PC => PC com Windows VISTA e UBUNTU
> > > MANEH-PC => PC com Windows XP e Windows VISTA
> > >
> > > Todos micros se enxergam e comunicam entre si, inclusive com minha
> > > máquina!!! Mas não enxergo nenhum deles indo em Locais>Rede também não
> > > consegui também digitando "smb://nomedopc" no nautilus.
> > >
> > > Muito estranho, já que todos me acessam, em todos sistemas
> > > operacionais e conseguem, inclusive, leitura e escrita das minhas
> > > pastas compartilhadas, somente eu não vejo nada, não importa qual SO
> > > seja!
> > >
> > > Alguém tem idéia do que está faltando?
> > >
> > > Vou postar o conteúdo do meu smb.conf e o resultado do comando smbtree
> > > logo abaixo:
> > >
> > > ============================================================================
> > > Conteúdo do meu smb.conf:
> > > #
> > > # Sample configuration file for the Samba suite for Debian GNU/Linux.
> > > #
> > > #
> > > # This is the main Samba configuration file. You should read the
> > > # smb.conf(5) manual page in order to understand the options listed
> > > # here. Samba has a huge number of configurable options most of which
> > > # are not shown in this example
> > > #
> > > # Any line which starts with a ; (semi-colon) or a # (hash)
> > > # is a comment and is ignored. In this example we will use a #
> > > # for commentary and a ; for parts of the config file that you
> > > # may wish to enable
> > > #
> > > # NOTE: Whenever you modify this file you should run the command
> > > # "testparm" to check that you have not made any basic syntactic
> > > # errors.
> > > #
> > >
> > > #======================= Global Settings =======================
> > >
> > > [global]
> > >
> > > ## Browsing/Identification ###
> > >
> > > # Change this to the workgroup/NT-domain name your Samba server will
> > > part of
> > > workgroup = MSHOME
> > >
> > > # server string is the equivalent of the NT Description field
> > > server string = %h server (Samba, Ubuntu)
> > >
> > > # Windows Internet Name Serving Support Section:
> > > # WINS Support - Tells the NMBD component of Samba to enable its WINS
> > > Server
> > > ; wins support = no
> > >
> > > # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> > > # Note: Samba can be either a WINS Server, or a WINS Client, but NOT
> > > both
> > > ; wins server = w.x.y.z
> > >
> > > # This will prevent nmbd to search for NetBIOS names through DNS.
> > > dns proxy = no
> > >
> > > # What naming service and in what order should we use to resolve host
> > > names
> > > # to IP addresses
> > > ; name resolve order = lmhosts host wins bcast
> > >
> > > #### Networking ####
> > >
> > > # The specific set of interfaces / networks to bind to
> > > # This can be either the interface name or an IP address/netmask;
> > > # interface names are normally preferred
> > > ; interfaces = 127.0.0.0/8 eth0
> > >
> > > # Only bind to the named interfaces and/or networks; you must use the
> > > # 'interfaces' option above to use this.
> > > # It is recommended that you enable this feature if your Samba machine
> > > is
> > > # not protected by a firewall or is a firewall itself. However, this
> > > # option cannot handle dynamic or non-broadcast interfaces correctly.
> > > ; bind interfaces only = true
> > >
> > >
> > >
> > > #### Debugging/Accounting ####
> > >
> > > # This tells Samba to use a separate log file for each machine
> > > # that connects
> > > log file = /var/log/samba/log.%m
> > >
> > > # Put a capping on the size of the log files (in Kb).
> > > max log size = 1000
> > >
> > > # If you want Samba to only log through syslog then set the following
> > > # parameter to 'yes'.
> > > ; syslog only = no
> > >
> > > # We want Samba to log a minimum amount of information to syslog.
> > > Everything
> > > # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to
> > > log
> > > # through syslog you should set the following parameter to something
> > > higher.
> > > syslog = 0
> > >
> > > # Do something sensible when Samba crashes: mail the admin a backtrace
> > > panic action = /usr/share/samba/panic-action %d
> > >
> > >
> > > ####### Authentication #######
> > >
> > > # "security = user" is always a good idea. This will require a Unix
> > > account
> > > # in this server for every user accessing the server. See
> > > # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
> > > # in the samba-doc package for details.
> > > security = share
> > >
> > > # You may wish to use password encryption. See the section on
> > > # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
> > > encrypt passwords = true
> > >
> > > # If you are using encrypted passwords, Samba will need to know what
> > > # password database type you are using.
> > > passdb backend = tdbsam
> > >
> > > obey pam restrictions = yes
> > >
> > > ; guest account = nobody
> > > invalid users = root
> > >
> > > # This boolean parameter controls whether Samba attempts to sync the
> > > Unix
> > > # password with the SMB password when the encrypted SMB password in the
> > > # passdb is changed.
> > > ; unix password sync = no
> > >
> > > # For Unix password sync to work on a Debian GNU/Linux system, the
> > > following
> > > # parameters must be set (thanks to Ian Kahan
> > > <<kahan em informatik.tu-muenchen.de> for
> > > # sending the correct chat script for the passwd program in Debian
> > > Sarge).
> > > passwd program = /usr/bin/passwd %u
> > > passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
> > > *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully*
> > > .
> > >
> > > # This boolean controls whether PAM will be used for password changes
> > > # when requested by an SMB client instead of the program listed in
> > > # 'passwd program'. The default is 'no'.
> > > ; pam password change = no
> > >
> > > ########## Domains ###########
> > >
> > > # Is this machine able to authenticate users. Both PDC and BDC
> > > # must have this setting enabled. If you are the BDC you must
> > > # change the 'domain master' setting to no
> > > #
> > > ; domain logons = yes
> > > #
> > > # The following setting only takes effect if 'domain logons' is set
> > > # It specifies the location of the user's profile directory
> > > # from the client point of view)
> > > # The following required a [profiles] share to be setup on the
> > > # samba server (see below)
> > > ; logon path = \\%N\profiles\%U
> > > # Another common choice is storing the profile in the user's home
> > > directory
> > > ; logon path = \\%N\%U\profile
> > >
> > > # The following setting only takes effect if 'domain logons' is set
> > > # It specifies the location of a user's home directory (from the client
> > > # point of view)
> > > ; logon drive = H:
> > > ; logon home = \\%N\%U
> > >
> > > # The following setting only takes effect if 'domain logons' is set
> > > # It specifies the script to run during logon. The script must be stored
> > > # in the [netlogon] share
> > > # NOTE: Must be store in 'DOS' file format convention
> > > ; logon script = logon.cmd
> > >
> > > # This allows Unix users to be created on the domain controller via the
> > > SAMR
> > > # RPC pipe. The example command creates a user account with a disabled
> > > Unix
> > > # password; please adapt to your needs
> > > ; add user script =
> > > /usr/sbin/adduser --quiet --disabled-password --gecos ""
> > > %u
> > >
> > > ########## Printing ##########
> > >
> > > # If you want to automatically load your printer list rather
> > > # than setting them up individually then you'll need this
> > > ; load printers = yes
> > >
> > > # lpr(ng) printing. You may wish to override the location of the
> > > # printcap file
> > > ; printing = bsd
> > > ; printcap name = /etc/printcap
> > >
> > > # CUPS printing. See also the cupsaddsmb(8) manpage in the
> > > # cupsys-client package.
> > > ; printing = cups
> > > ; printcap name = cups
> > >
> > > # When using [print$], root is implicitly a 'printer admin', but you can
> > > # also give this right to other users to add drivers and set printer
> > > # properties
> > > ; printer admin = @lpadmin
> > >
> > >
> > > ############ Misc ############
> > >
> > > # Using the following line enables you to customise your configuration
> > > # on a per machine basis. The %m gets replaced with the netbios name
> > > # of the machine that is connecting
> > > ; include = /home/samba/etc/smb.conf.%m
> > >
> > > # Most people will find that this option gives better performance.
> > > # See smb.conf(5) and
> > > /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
> > > # for details
> > > # You may want to add the following on a Linux system:
> > > # SO_RCVBUF=8192 SO_SNDBUF=8192
> > > socket options = TCP_NODELAY
> > >
> > > # The following parameter is useful only if you have the linpopup
> > > package
> > > # installed. The samba maintainer and the linpopup maintainer are
> > > # working to ease installation and configuration of linpopup and samba.
> > > ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s'
> > > &
> > >
> > > # Domain Master specifies Samba to be the Domain Master Browser. If this
> > > # machine will be configured as a BDC (a secondary logon server), you
> > > # must set this to 'no'; otherwise, the default behavior is recommended.
> > > ; domain master = auto
> > >
> > > # Some defaults for winbind (make sure you're not using the ranges
> > > # for something else.)
> > > ; idmap uid = 10000-20000
> > > ; idmap gid = 10000-20000
> > > ; template shell = /bin/bash
> > >
> > > #======================= Share Definitions =======================
> > >
> > > # Un-comment the following (and tweak the other settings below to suit)
> > > # to enable the default home directory shares. This will share each
> > > # user's home directory as \\server\username
> > > ;[homes]
> > > ; comment = Home Directories
> > > ; browseable = no
> > >
> > > # By default, \\server\username shares can be connected to by anyone
> > > # with access to the samba server. Un-comment the following parameter
> > > # to make sure that only "username" can connect to \\server\username
> > > ; valid users = %S
> > >
> > > # By default, the home directories are exported read-only. Change next
> > > # parameter to 'yes' if you want to be able to write to them.
> > > ; writable = no
> > >
> > > # File creation mask is set to 0600 for security reasons. If you want to
> > > # create files with group=rw permissions, set next parameter to 0664.
> > > ; create mask = 0600
> > >
> > > # Directory creation mask is set to 0700 for security reasons. If you
> > > want
> > > to
> > > # create dirs. with group=rw permissions, set next parameter to 0775.
> > > ; directory mask = 0700
> > >
> > > # Un-comment the following and create the netlogon directory for Domain
> > > Logons
> > > # (you need to configure Samba to act as a domain controller too.)
> > > ;[netlogon]
> > > ; comment = Network Logon Service
> > > ; path = /home/samba/netlogon
> > > ; guest ok = yes
> > > ; writable = no
> > > ; share modes = no
> > >
> > > # Un-comment the following and create the profiles directory to store
> > > # users profiles (see the "logon path" option above)
> > > # (you need to configure Samba to act as a domain controller too.)
> > > # The path below should be writable by all users so that their
> > > # profile directory may be created the first time they log on
> > > ;[profiles]
> > > ; comment = Users profiles
> > > ; path = /home/samba/profiles
> > > ; guest ok = no
> > > ; browseable = no
> > > ; create mask = 0600
> > > ; directory mask = 0700
> > >
> > > wins support = no
> > > [printers]
> > > comment = All Printers
> > > browseable = no
> > > path = /var/spool/samba
> > > printable = yes
> > > public = no
> > > writable = no
> > > create mode = 0700
> > >
> > > # Windows clients look for this share name as a source of downloadable
> > > # printer drivers
> > > [print$]
> > > comment = Printer Drivers
> > > path = /var/lib/samba/printers
> > > browseable = yes
> > > read only = yes
> > > guest ok = no
> > > # Uncomment to allow remote administration of Windows print drivers.
> > > # Replace 'ntadmin' with the name of the group your admin users are
> > > # members of.
> > > ; write list = root, @ntadmin
> > >
> > > # A sample share for sharing your CD-ROM with others.
> > > ;[cdrom]
> > > ; comment = Samba server's CD-ROM
> > > ; writable = no
> > > ; locking = no
> > > ; path = /cdrom
> > > ; public = yes
> > >
> > > # The next two parameters show how to auto-mount a CD-ROM when the
> > > # cdrom share is accesed. For this to work /etc/fstab must contain
> > > # an entry like this:
> > > #
> > > # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
> > > #
> > > # The CD-ROM gets unmounted automatically after the connection to the
> > > #
> > > # If you don't want to use auto-mounting/unmounting make sure the CD
> > > # is mounted on /cdrom
> > > #
> > > ; preexec = /bin/mount /cdrom
> > > ; postexec = /bin/umount /cdrom
> > >
> > >
> > > [Arquivos Antigos]
> > > path = /media/sdb1/Arquivos Antigos
> > > available = yes
> > > browsable = yes
> > > public = yes
> > > writable = yes
> > > ==============================================================================
> > >
> > > Resultado de quando digito smbtree no terminal:
> > > WORKGROUP
> > > \\GUSTAVO-PC
> > > \\GUSTAVO-PC\utorrent
> > > \\GUSTAVO-PC\Users
> > > \\GUSTAVO-PC\Public
> > > \\GUSTAVO-PC\Músicas
> > > \\GUSTAVO-PC\Jogos
> > > \\GUSTAVO-PC\IPC$ IPC remoto
> > > \\GUSTAVO-PC\Downloads
> > > \\GUSTAVO-PC\D$ Recurso compartilhado padrão
> > > \\GUSTAVO-PC\D
> > > \\GUSTAVO-PC\Conversores
> > > \\GUSTAVO-PC\C$ Recurso compartilhado padrão
> > > \\GUSTAVO-PC\ADMIN$ Administração remota
> > > MSHOME
> > > \\MANEH-PC
> > > cli_start_connection: failed to connect to MANEH-PC<20> (0.0.0.0)
> > > \\ALAN-PC alan-pc server (Samba, Ubuntu)
> > > \\ALAN-PC\IPC$ IPC Service (alan-pc server (Samba, Ubuntu))
> > > \\ALAN-PC\Arquivos Antigos
> > > \\ALAN-PC\print$ Printer Drivers
> > >
> > > ============================================================================
> > >
> > > Muito Obrigado!
> > >
> > > --
> > > Interessado em aprender mais sobre o Ubuntu em português?
> > > http://wiki.ubuntu-br.org/ComeceAqui -
> > > ubuntu-br mailing list
> > > ubuntu-br em lists.ubuntu.com
> > > https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
> > >
> > >
> > > --
> > > Interessado em aprender mais sobre o Ubuntu em português?
> > > http://wiki.ubuntu-br.org/ComeceAqui -
> > > ubuntu-br mailing list
> > > ubuntu-br em lists.ubuntu.com
> > > https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
> > >
> >
>
> --
> Interessado em aprender mais sobre o Ubuntu em português?
> http://wiki.ubuntu-br.org/ComeceAqui -
> ubuntu-br mailing list
> ubuntu-br em lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
>
>
> --
> Interessado em aprender mais sobre o Ubuntu em português?
> http://wiki.ubuntu-br.org/ComeceAqui -
> ubuntu-br mailing list
> ubuntu-br em lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
>
More information about the ubuntu-br
mailing list