[Ubuntu-BD] Edge using usb need reply soon

[dark lord]

Still got problem when tried to connect always shows sending password

i saw the log it says Please enter password(or empty password to stop)

1mor thing when ever i cancel connecting and try to reconnect it says
cannot open modem. Then i try to detect modem again says no modem was
found on your system. So i plug out and plug in usb again then it
detect modem but device changd to ttyACM0 TO ACM1,2,3,4 (I TRIED 4
TIMES)

On 11/16/08, 9el <lenin at phpxperts.net> wrote:
> So,
> Set at your gnome-ppp
> ttyACM0 as your modem
> and
> set speed as 460k
> and at  Init string add  the 3rd Init string as   AT+CGDCONT=1,,"gpinternet"
>
> at teh dialer  prompt  use  phonenumber as     *99#  or  *99***# or *99***1#
> use  username as  x and also password as x
>
> This should work just fine.
>
> You didn't paste the content of   /etc/wvdial.conf
>
> see my tutorial at that page.... replace the modem name as   ttyACM0 and
> other things will be almost same. :)
>
> Good Luck
>
> On Mon, Nov 17, 2008 at 3:38 AM, Darklord2007 <darklord2007 at gmail.com>wrote:
>
>> Attached output. Just deleted prev conf this is new 1
>> root at darklord:~# sudo wvdialconf
>> Editing `/etc/wvdial.conf'.
>>
>> Scanning your serial ports for a modem.
>>
>> ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>> ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
>> ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>> ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>> ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
>> ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>> Modem Port Scan<*1>: S2   S3
>> WvModem<*1>: Cannot get information for serial port.
>> ttyACM0<*1>: ATQ0 V1 E1 -- OK
>> ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
>> ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
>> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>> ttyACM0<*1>: Modem Identifier: ATI -- Nokia
>> ttyACM0<*1>: Speed 4800: AT -- OK
>> ttyACM0<*1>: Speed 9600: AT -- OK
>> ttyACM0<*1>: Speed 19200: AT -- OK
>> ttyACM0<*1>: Speed 38400: AT -- OK
>> ttyACM0<*1>: Speed 57600: AT -- OK
>> ttyACM0<*1>: Speed 115200: AT -- OK
>> ttyACM0<*1>: Speed 230400: AT -- OK
>> ttyACM0<*1>: Speed 460800: AT -- OK
>> ttyACM0<*1>: Max speed is 460800; that should be safe.
>> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>
>> Found an USB modem on /dev/ttyACM0.
>> /etc/wvdial.conf<Warn>: Can't open '/etc/wvdial.conf' for reading: No such
>> file or directory
>> /etc/wvdial.conf<Warn>: ...starting with blank configuration.
>> Modem configuration written to /etc/wvdial.conf.
>> ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>>
>>
>> --
>> ubuntu-bd mailing list
>> ubuntu-bd at lists.ubuntu.com
>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-bd
>>
>>
>
>
> --
> -------------------------------------------------------------------------
> Use FreeOpenSourceSoftwares, Stop piracy, Let the developers live. Get
> a Free CD of Ubuntu mailed to your door without any cost. Visit :
> www.ubuntu.com
> -------------------------------------------------------------------------
> --
> ubuntu-bd mailing list
> ubuntu-bd at lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-bd
>


-- 
DARKLORD (:=