[Ubuntu-BD] Edge using usb need reply soon

[9el]

So,
Set at your gnome-ppp
ttyACM0 as your modem
and
set speed as 460k
and at  Init string add  the 3rd Init string as   AT+CGDCONT=1,,"gpinternet"

at teh dialer  prompt  use  phonenumber as     *99#  or  *99***# or *99***1#
use  username as  x and also password as x

This should work just fine.

You didn't paste the content of   /etc/wvdial.conf

see my tutorial at that page.... replace the modem name as   ttyACM0 and
other things will be almost same. :)

Good Luck

On Mon, Nov 17, 2008 at 3:38 AM, Darklord2007 <darklord2007 at gmail.com>wrote:

> Attached output. Just deleted prev conf this is new 1
> root at darklord:~# sudo wvdialconf
> Editing `/etc/wvdial.conf'.
>
> Scanning your serial ports for a modem.
>
> ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
> ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
> ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
> ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
> ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
> ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
> Modem Port Scan<*1>: S2   S3
> WvModem<*1>: Cannot get information for serial port.
> ttyACM0<*1>: ATQ0 V1 E1 -- OK
> ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
> ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
> ttyACM0<*1>: Modem Identifier: ATI -- Nokia
> ttyACM0<*1>: Speed 4800: AT -- OK
> ttyACM0<*1>: Speed 9600: AT -- OK
> ttyACM0<*1>: Speed 19200: AT -- OK
> ttyACM0<*1>: Speed 38400: AT -- OK
> ttyACM0<*1>: Speed 57600: AT -- OK
> ttyACM0<*1>: Speed 115200: AT -- OK
> ttyACM0<*1>: Speed 230400: AT -- OK
> ttyACM0<*1>: Speed 460800: AT -- OK
> ttyACM0<*1>: Max speed is 460800; that should be safe.
> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>
> Found an USB modem on /dev/ttyACM0.
> /etc/wvdial.conf<Warn>: Can't open '/etc/wvdial.conf' for reading: No such
> file or directory
> /etc/wvdial.conf<Warn>: ...starting with blank configuration.
> Modem configuration written to /etc/wvdial.conf.
> ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>
>
> --
> ubuntu-bd mailing list
> ubuntu-bd at lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-bd
>
>


-- 
-------------------------------------------------------------------------
Use FreeOpenSourceSoftwares, Stop piracy, Let the developers live. Get
a Free CD of Ubuntu mailed to your door without any cost. Visit :
www.ubuntu.com
-------------------------------------------------------------------------