[ubuntu-ar] xsane no reconoce mi scanner canon lide 100
Alejandro N. Lorenzetti
alelorenzetti at gmail.com
Sat Mar 21 15:14:38 GMT 2009
El 21 de marzo de 2009 12:04, Martín Carr <tincarr en gmail.com> escribió:
> 2009/3/21 Alejandro N. Lorenzetti
> > Hola listeros: soy el reciente propietario de un scanner canono lide 100,
> > ese finito que reemplaza al lide 25. Al intentar usar xsane me c manda le
> > mensaje "No hay dispositivos obtenibles" y la ayuda me pone varias
> razones
> > posibles:
>
> Enchufalo y después escribí en una terminal
>
> dmesg
>
> eso te va a decir cómo lo reconoce el sistema. Peganos la salida de
> ese comando (podés pintar con el mouse y apretár el botón del medio
> para pegar)
La salida es esta:
[ 0.448327] pci 0000:00:02.1: PME# disabled
[ 0.448374] PCI: 0000:00:05.0 reg 10 32bit mmio: [fe028000, fe02bfff]
[ 0.448396] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.448399] pci 0000:00:05.0: PME# disabled
[ 0.448425] PCI: 0000:00:06.0 reg 20 io port: [f000, f00f]
[ 0.448453] PCI: 0000:00:07.0 reg 10 32bit mmio: [fe02d000, fe02dfff]
[ 0.448456] PCI: 0000:00:07.0 reg 14 io port: [ec00, ec07]
[ 0.448473] pci 0000:00:07.0: supports D1
[ 0.448475] pci 0000:00:07.0: supports D2
[ 0.448477] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448481] pci 0000:00:07.0: PME# disabled
[ 0.448495] PCI: 0000:00:08.0 reg 10 io port: [9f0, 9f7]
[ 0.448498] PCI: 0000:00:08.0 reg 14 io port: [bf0, bf3]
[ 0.448502] PCI: 0000:00:08.0 reg 18 io port: [970, 977]
[ 0.448505] PCI: 0000:00:08.0 reg 1c io port: [b70, b73]
[ 0.448508] PCI: 0000:00:08.0 reg 20 io port: [d800, d80f]
[ 0.448512] PCI: 0000:00:08.0 reg 24 32bit mmio: [fe02c000, fe02cfff]
[ 0.448546] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448549] pci 0000:00:09.0: PME# disabled
[ 0.448570] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448573] pci 0000:00:0b.0: PME# disabled
[ 0.448593] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448595] pci 0000:00:0c.0: PME# disabled
[ 0.448606] PCI: 0000:00:0d.0 reg 10 32bit mmio: [fb000000, fbffffff]
[ 0.448611] PCI: 0000:00:0d.0 reg 14 64bit mmio: [e0000000, efffffff]
[ 0.448615] PCI: 0000:00:0d.0 reg 1c 64bit mmio: [fc000000, fcffffff]
[ 0.448619] PCI: 0000:00:0d.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.448709] PCI: 0000:01:06.0 reg 10 io port: [cc00, ccff]
[ 0.448715] PCI: 0000:01:06.0 reg 14 32bit mmio: [fdeff000, fdeff0ff]
[ 0.448741] pci 0000:01:06.0: supports D1
[ 0.448743] pci 0000:01:06.0: supports D2
[ 0.448745] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448748] pci 0000:01:06.0: PME# disabled
[ 0.448771] pci 0000:00:04.0: transparent bridge
[ 0.448774] PCI: bridge 0000:00:04.0 io port: [c000, cfff]
[ 0.448777] PCI: bridge 0000:00:04.0 32bit mmio: [fde00000, fdefffff]
[ 0.448780] PCI: bridge 0000:00:04.0 32bit mmio pref: [fd700000,
fd7fffff]
[ 0.448812] PCI: bridge 0000:00:09.0 io port: [b000, bfff]
[ 0.448815] PCI: bridge 0000:00:09.0 32bit mmio: [fdd00000, fddfffff]
[ 0.448818] PCI: bridge 0000:00:09.0 64bit mmio pref: [fdc00000,
fdcfffff]
[ 0.448851] PCI: bridge 0000:00:0b.0 io port: [a000, afff]
[ 0.448853] PCI: bridge 0000:00:0b.0 32bit mmio: [fdb00000, fdbfffff]
[ 0.448856] PCI: bridge 0000:00:0b.0 64bit mmio pref: [fda00000,
fdafffff]
[ 0.448888] PCI: bridge 0000:00:0c.0 io port: [9000, 9fff]
[ 0.448891] PCI: bridge 0000:00:0c.0 32bit mmio: [fd900000, fd9fffff]
[ 0.448894] PCI: bridge 0000:00:0c.0 64bit mmio pref: [fd800000,
fd8fffff]
[ 0.448902] bus 00 -> node 0
[ 0.448908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.449201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.516065] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.516251] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.516437] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
[ 0.516621] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.516807] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.516990] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.517175] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.517360] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.517545] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
[ 0.517729] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.517916] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 0.518101] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.518287] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.518473] ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 9 10 11 14 15)
[ 0.518660] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 0.518846] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 0.519031] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.519218] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.519403] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.519635] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.519862] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.520092] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.520318] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.520545] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.520765] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.520991] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.521219] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.521439] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.521666] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.521887] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.522114] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[ 0.522335] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.522562] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.522783] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.523011] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0,
disabled.
[ 0.523232] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0,
disabled.
[ 0.523460] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.523681] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0,
disabled.
[ 0.523748] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.523748] pnp: PnP ACPI init
[ 0.523748] ACPI: bus type pnp registered
[ 0.528606] pnp: PnP ACPI: found 15 devices
[ 0.528606] ACPI: ACPI bus type pnp unregistered
[ 0.528606] PnPBIOS: Disabled by ACPI PNP
[ 0.528606] PCI: Using ACPI for IRQ routing
[ 0.536039] NET: Registered protocol family 8
[ 0.536042] NET: Registered protocol family 20
[ 0.536057] NetLabel: Initializing
[ 0.536059] NetLabel: domain hash size = 128
[ 0.536060] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.536074] NetLabel: unlabeled traffic allowed by default
[ 0.536081] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.536085] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.537606] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.537608] actual entries 65620
[ 0.537725] AppArmor: AppArmor Filesystem Enabled
[ 0.537750] ACPI: RTC can wake from S4
[ 0.540043] Switched to high resolution mode on CPU 0
[ 0.540182] Switched to high resolution mode on CPU 1
[ 0.544027] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.544030] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.544033] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.544036] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.544039] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.544041] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.544044] system 00:01: ioport range 0x2000-0x207f has been reserved
[ 0.544047] system 00:01: ioport range 0x2080-0x20ff has been reserved
[ 0.544051] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be
reserved
[ 0.544054] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be
reserved
[ 0.544057] system 00:01: iomem range 0x78000000-0x7fffffff could not be
reserved
[ 0.544063] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.544065] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.544068] system 00:02: ioport range 0x290-0x29f has been reserved
[ 0.544071] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.544081] system 00:0d: iomem range 0xf0000000-0xf3ffffff could not be
reserved
[ 0.544087] system 00:0e: iomem range 0xf0000-0xfffff could not be
reserved
[ 0.544090] system 00:0e: iomem range 0xfeff0000-0xfeff00ff could not be
reserved
[ 0.544093] system 00:0e: iomem range 0x77ef0000-0x77efffff could not be
reserved
[ 0.544096] system 00:0e: iomem range 0xffff0000-0xffffffff could not be
reserved
[ 0.544099] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.544101] system 00:0e: iomem range 0x100000-0x77eeffff could not be
reserved
[ 0.544104] system 00:0e: iomem range 0x77f00000-0x7fefffff could not be
reserved
[ 0.544107] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.544110] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be
reserved
[ 0.544113] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be
reserved
[ 0.544116] system 00:0e: iomem range 0xfff80000-0xfff80fff could not be
reserved
[ 0.544119] system 00:0e: iomem range 0xfff90000-0xfffbffff could not be
reserved
[ 0.544122] system 00:0e: iomem range 0xfffed000-0xfffeffff could not be
reserved
[ 0.579250] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.579253] pci 0000:00:04.0: IO window: 0xc000-0xcfff
[ 0.579257] pci 0000:00:04.0: MEM window: 0xfde00000-0xfdefffff
[ 0.579260] pci 0000:00:04.0: PREFETCH window:
0x000000fd700000-0x000000fd7fffff
[ 0.579265] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.579267] pci 0000:00:09.0: IO window: 0xb000-0xbfff
[ 0.579270] pci 0000:00:09.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.579273] pci 0000:00:09.0: PREFETCH window:
0x000000fdc00000-0x000000fdcfffff
[ 0.579276] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[ 0.579278] pci 0000:00:0b.0: IO window: 0xa000-0xafff
[ 0.579281] pci 0000:00:0b.0: MEM window: 0xfdb00000-0xfdbfffff
[ 0.579284] pci 0000:00:0b.0: PREFETCH window:
0x000000fda00000-0x000000fdafffff
[ 0.579287] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.579290] pci 0000:00:0c.0: IO window: 0x9000-0x9fff
[ 0.579293] pci 0000:00:0c.0: MEM window: 0xfd900000-0xfd9fffff
[ 0.579295] pci 0000:00:0c.0: PREFETCH window:
0x000000fd800000-0x000000fd8fffff
[ 0.579304] pci 0000:00:04.0: setting latency timer to 64
[ 0.579309] pci 0000:00:09.0: setting latency timer to 64
[ 0.579313] pci 0000:00:0b.0: setting latency timer to 64
[ 0.579317] pci 0000:00:0c.0: setting latency timer to 64
[ 0.579320] bus: 00 index 0 io port: [0, ffff]
[ 0.579322] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.579324] bus: 01 index 0 io port: [c000, cfff]
[ 0.579326] bus: 01 index 1 mmio: [fde00000, fdefffff]
[ 0.579328] bus: 01 index 2 mmio: [fd700000, fd7fffff]
[ 0.579330] bus: 01 index 3 io port: [0, ffff]
[ 0.579332] bus: 01 index 4 mmio: [0, ffffffff]
[ 0.579333] bus: 02 index 0 io port: [b000, bfff]
[ 0.579336] bus: 02 index 1 mmio: [fdd00000, fddfffff]
[ 0.579338] bus: 02 index 2 mmio: [fdc00000, fdcfffff]
[ 0.579339] bus: 02 index 3 mmio: [0, 0]
[ 0.579341] bus: 03 index 0 io port: [a000, afff]
[ 0.579343] bus: 03 index 1 mmio: [fdb00000, fdbfffff]
[ 0.579345] bus: 03 index 2 mmio: [fda00000, fdafffff]
[ 0.579347] bus: 03 index 3 mmio: [0, 0]
[ 0.579349] bus: 04 index 0 io port: [9000, 9fff]
[ 0.579351] bus: 04 index 1 mmio: [fd900000, fd9fffff]
[ 0.579353] bus: 04 index 2 mmio: [fd800000, fd8fffff]
[ 0.579355] bus: 04 index 3 mmio: [0, 0]
[ 0.579364] NET: Registered protocol family 2
[ 0.592051] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.592297] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.592834] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.593084] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.593087] TCP reno registered
[ 0.600073] NET: Registered protocol family 1
[ 0.600182] checking if image is initramfs... it is
[ 1.175355] Freeing initrd memory: 7953k freed
[ 1.176246] audit: initializing netlink socket (disabled)
[ 1.176263] type=2000 audit(1237631173.173:1): initialized
[ 1.181314] highmem bounce pool size: 64 pages
[ 1.181320] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.183639] VFS: Disk quotas dquot_6.5.1
[ 1.183721] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.183812] msgmni has been set to 1746
[ 1.183919] io scheduler noop registered
[ 1.183921] io scheduler anticipatory registered
[ 1.183923] io scheduler deadline registered
[ 1.183934] io scheduler cfq registered (default)
[ 1.183965] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.184059] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 1.184075] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 1.184101] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.184115] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.184129] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.184143] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.184157] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.184171] pci 0000:00:0d.0: Boot video device
[ 1.184271] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 1.184293] pcieport-driver 0000:00:09.0: found MSI capability
[ 1.184312] pci_express 0000:00:09.0:pcie00: allocate port service
[ 1.184356] pci_express 0000:00:09.0:pcie03: allocate port service
[ 1.184426] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.184446] pcieport-driver 0000:00:0b.0: found MSI capability
[ 1.184461] pci_express 0000:00:0b.0:pcie00: allocate port service
[ 1.184504] pci_express 0000:00:0b.0:pcie03: allocate port service
[ 1.184574] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.184595] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.184610] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.184650] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.184948] isapnp: Scanning for PnP cards...
[ 1.537547] isapnp: No Plug & Play device found
[ 1.570855] hpet_resources: 0xfeff0000 is busy
[ 1.570920] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.571039] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.571674] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.573362] brd: module loaded
[ 1.573425] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 1.573536] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 1.573921] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.573926] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.577118] mice: PS/2 mouse device common for all mice
[ 1.577236] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.577269] rtc0: alarms up to one year, y3k, hpet irqs
[ 1.577391] EISA: Probing bus 0 at eisa.0
[ 1.577396] Cannot allocate resource for EISA slot 1
[ 1.577399] Cannot allocate resource for EISA slot 2
[ 1.577414] EISA: Detected 0 cards.
[ 1.577417] cpuidle: using governor ladder
[ 1.577419] cpuidle: using governor menu
[ 1.577858] TCP cubic registered
[ 1.577880] Using IPI No-Shortcut mode
[ 1.578059] registered taskstats version 1
[ 1.578164] Magic number: 1:991:426
[ 1.578264] pcieport-driver 0000:00:0b.0: hash matches
[ 1.578323] rtc_cmos 00:05: setting system clock to 2009-03-21 10:26:14
UTC (1237631174)
[ 1.578326] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.578328] EDD information not available.
[ 1.578574] Freeing unused kernel memory: 424k freed
[ 1.578629] Write protecting the kernel text: 2580k
[ 1.578663] Write protecting the kernel read-only data: 940k
[ 1.595457] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 1.757155] fuse init (API version 7.9)
[ 1.799871] fan PNP0C0B:00: registered as cooling_device0
[ 1.799877] ACPI: Fan [FAN] (on)
[ 1.816230] processor ACPI0007:00: registered as cooling_device1
[ 1.816285] processor ACPI0007:01: registered as cooling_device2
[ 1.818683] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.819047] ACPI: Thermal Zone [THRM] (28 C)
[ 2.236917] usbcore: registered new interface driver usbfs
[ 2.236940] usbcore: registered new interface driver hub
[ 2.236965] usbcore: registered new device driver usb
[ 2.238620] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 2.239009] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 2.239018] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23
(level, low) -> IRQ 23
[ 2.239028] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.239031] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.239071] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
[ 2.239093] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 2.247873] Warning! ehci_hcd should always be loaded before uhci_hcd and
ohci_hcd, not after
[ 2.267652] No dock devices found.
[ 2.279175] SCSI subsystem initialized
[ 2.294914] usb usb1: configuration #1 chosen from 1 choice
[ 2.294942] hub 1-0:1.0: USB hub found
[ 2.294951] hub 1-0:1.0: 8 ports detected
[ 2.352893] libata version 3.00 loaded.
[ 2.352981] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 2.352985] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 2.500690] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 2.500702] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22
(level, low) -> IRQ 22
[ 2.500714] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 2.500716] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 2.500738] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 2
[ 2.500764] ehci_hcd 0000:00:02.1: debug port 1
[ 2.500768] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 2.500783] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 2.512023] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 2.512179] usb usb2: configuration #1 chosen from 1 choice
[ 2.512283] hub 2-0:1.0: USB hub found
[ 2.512292] hub 2-0:1.0: 8 ports detected
[ 2.720274] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 2.720299] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.61.
[ 2.720670] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 2.720680] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 21
(level, low) -> IRQ 21
[ 2.720684] forcedeth 0000:00:07.0: setting latency timer to 64
[ 2.832016] usb 2-2: new high speed USB device using ehci_hcd and address
2
[ 2.965552] usb 2-2: configuration #1 chosen from 1 choice
[ 3.240685] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr
00:e0:4d:6f:4f:67
[ 3.240688] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi
desc-v3
[ 3.241054] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 3.241062] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20
(level, low) -> IRQ 20
[ 3.241085] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 3.241094] pata_acpi 0000:00:08.0: PCI INT A disabled
[ 3.241965] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 3.241973] via-rhine 0000:01:06.0: PCI INT A -> Link[APC3] -> GSI 18
(level, low) -> IRQ 18
[ 3.241978] via-rhine 0000:01:06.0: setting latency timer to 64
[ 3.247464] eth1: VIA Rhine III at 0xfdeff000, 00:1c:f0:9c:72:9b, IRQ 18.
[ 3.248174] eth1: MII PHY found at address 1, status 0x7849 advertising
05e1 Link 0000.
[ 3.252039] sata_nv 0000:00:08.0: version 3.5
[ 3.252054] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20
(level, low) -> IRQ 20
[ 3.252090] sata_nv 0000:00:08.0: setting latency timer to 64
[ 3.253507] scsi0 : sata_nv
[ 3.253649] scsi1 : sata_nv
[ 3.253829] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq
20
[ 3.253832] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq
20
[ 3.720035] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.728117] ata1.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[ 3.744120] ata1.00: configured for UDMA/100
[ 4.212035] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.229706] ata2.00: ATA-7: WDC WD2500AAJS-22RYA0, 12.01B01, max UDMA/133
[ 4.229709] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.244884] ata2.00: configured for UDMA/133
[ 4.248242] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10
EL00 PQ: 0 ANSI: 5
[ 4.248371] scsi 1:0:0:0: Direct-Access ATA WDC WD2500AAJS-2
12.0 PQ: 0 ANSI: 5
[ 4.251760] pata_amd 0000:00:06.0: version 0.3.10
[ 4.251813] pata_amd 0000:00:06.0: setting latency timer to 64
[ 4.252400] scsi2 : pata_amd
[ 4.252470] scsi3 : pata_amd
[ 4.253085] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq
14
[ 4.253088] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq
15
[ 4.259053] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.259088] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.275654] Driver 'sd' needs updating - please use bus_type methods
[ 4.275753] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059
MB)
[ 4.275768] sd 1:0:0:0: [sda] Write Protect is off
[ 4.275770] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.275792] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.275852] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059
MB)
[ 4.275863] sd 1:0:0:0: [sda] Write Protect is off
[ 4.275866] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.275885] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.275889] sda:<4>Driver 'sr' needs updating - please use bus_type
methods
[ 4.284381] sda1 sda2 sda3 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram
cd/rw xa/form2 cdda tray
[ 4.289930] Uniform CD-ROM driver Revision: 3.20
[ 4.290022] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.305967] sda5 >
[ 4.306115] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.418976] ata4: port disabled. ignoring.
[ 4.715639] PM: Starting manual resume from disk
[ 4.715643] PM: Resume from partition 8:5
[ 4.715644] PM: Checking hibernation image.
[ 4.715825] PM: Resume from disk failed.
[ 4.760933] kjournald starting. Commit interval 5 seconds
[ 4.760950] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.258786] udevd version 124 started
[ 10.661494] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.735007] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.836214] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 10.836232] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 10.855643] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 10.872053] ACPI: Power Button (FF) [PWRF]
[ 10.872130] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 10.904016] ACPI: Power Button (CM) [PWRB]
[ 10.904088] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 10.940044] ACPI: Sleep Button (CM) [SLPB]
[ 11.002467] Linux agpgart interface v0.103
[ 11.117033] parport_pc 00:0a: reported by Plug and Play ACPI
[ 11.117077] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 11.289063] nvidia: module license 'NVIDIA' taints kernel.
[ 11.630614] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 11.630620] nvidia 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 23
(level, low) -> IRQ 23
[ 11.630625] nvidia 0000:00:0d.0: setting latency timer to 64
[ 11.630868] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov
4 13:35:57 PST 2008
[ 11.913503] udev: renamed network interface eth1 to eth0
[ 11.959353] udev: renamed network interface eth0_rename to eth1
[ 12.097377] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 12.097383] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22
(level, low) -> IRQ 22
[ 12.097400] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 12.134867] hda_codec: Unknown model for ALC662, trying auto-probe from
BIOS...
[ 12.164601] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 12.631025] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input6
[ 13.224444] lp0: using parport0 (interrupt-driven).
[ 13.324637] Adding 3646712k swap on /dev/sda5. Priority:-1 extents:1
across:3646712k
[ 13.867681] EXT3 FS on sda2, internal journal
[ 14.876797] type=1505 audit(1237641987.748:2): operation="profile_load"
name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4119
[ 15.058351] type=1505 audit(1237641987.932:3): operation="profile_load"
name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4124
[ 15.058555] type=1505 audit(1237641987.932:4): operation="profile_load"
name="/usr/sbin/cupsd" name2="default" pid=4124
[ 15.191547] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.678370] ACPI: WMI: Mapper loaded
[ 15.857747] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
4600+ processors (2 cpu cores) (version 2.20.00)
[ 15.858282] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0xa
[ 15.858286] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xc
[ 15.858288] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xe
[ 15.858290] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x10
[ 15.858292] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[ 16.653242] warning: `avahi-daemon' uses 32-bit capabilities (legacy
support in use)
[ 16.746572] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 16.746578] apm: disabled - APM is not SMP safe.
[ 16.890843] ppdev: user-space parallel port driver
[ 18.504021] Clocksource tsc unstable (delta = -143403133 ns)
[ 19.127746] Bluetooth: Core ver 2.13
[ 19.128849] NET: Registered protocol family 31
[ 19.128860] Bluetooth: HCI device and connection manager initialized
[ 19.128870] Bluetooth: HCI socket layer initialized
[ 19.168910] Bluetooth: L2CAP ver 2.11
[ 19.168922] Bluetooth: L2CAP socket layer initialized
[ 19.198791] Bluetooth: RFCOMM socket layer initialized
[ 19.198824] Bluetooth: RFCOMM TTY layer initialized
[ 19.198829] Bluetooth: RFCOMM ver 1.10
[ 19.206157] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.206167] Bluetooth: BNEP filters: protocol multicast
[ 19.284721] Bridge firewalling registered
[ 19.329222] Bluetooth: SCO (Voice Link) ver 0.6
[ 19.329232] Bluetooth: SCO socket layer initialized
[ 23.382176] eth0: link down
[ 23.605337] NET: Registered protocol family 17
[ 28.545460] NET: Registered protocol family 10
[ 28.546725] lo: Disabled Privacy Extensions
[ 28.548758] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.388022] eth1: no IPv6 routers present
[ 591.564327] ppdev0: registered pardevice
[ 591.612245] ppdev0: unregistered pardevice
[ 592.904432] ppdev0: registered pardevice
[ 592.952034] ppdev0: unregistered pardevice
[ 592.980134] ppdev0: registered pardevice
[ 593.028381] ppdev0: unregistered pardevice
[ 1597.944534] ppdev0: registered pardevice
[ 1597.992473] ppdev0: unregistered pardevice
[ 1599.146183] ppdev0: registered pardevice
[ 1599.192089] ppdev0: unregistered pardevice
[ 1599.206633] ppdev0: registered pardevice
[ 1599.252606] ppdev0: unregistered pardevice
[ 1844.194330] NVRM: request_mem_region failed for 16M @ 0xfb000000. This
can
[ 1844.194335] NVRM: occur when a driver such as rivatv is loaded and claims
[ 1844.194338] NVRM: ownership of the device's registers.
[ 1844.194384] nvidia: probe of 0000:00:0d.0 failed with error -1
[ 3487.360382] ppdev0: registered pardevice
[ 3487.408357] ppdev0: unregistered pardevice
[ 3488.575353] ppdev0: registered pardevice
[ 3488.625380] ppdev0: unregistered pardevice
[ 3488.642377] ppdev0: registered pardevice
[ 3488.688629] ppdev0: unregistered pardevice
[ 3647.147751] type=1503 audit(1237645620.020:5): operation="capable"
name="dac_override" pid=7984 profile="/usr/lib/cups/backend/cups-pdf"
[ 3647.147774] type=1503 audit(1237645620.020:6): operation="capable"
name="dac_read_search" pid=7984 profile="/usr/lib/cups/backend/cups-pdf"
alejandro en alejandro-desktop:~$
>
>
> Ya viste si está soportado por sane?
¿Cómo puedo saberlo?
>
> Muchas gracias,
ALejandro
------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: https://lists.ubuntu.com/archives/ubuntu-ar/attachments/20090321/1a2d61b5/attachment-0001.htm
More information about the Ubuntu-ar
mailing list