[ubuntu-ar] Lector de tarjetas SD/MMS
Agustín Argañaraz
aarganaraz at gmail.com
Fri Jun 5 18:25:41 BST 2009
El 5 de junio de 2009 14:17, Marco Antonio <mhoyos en gmail.com> escribió:
> El 5 de junio de 2009 13:28, AgustÃn Argañaraz<aarganaraz en gmail.com>
> escribió:
> >
>
> >
> > Bus 002 Device 003: ID 064e:a104 Suyin Corp.
>
> esto corresponde al lector de tarjetas...
>
> https://answers.launchpad.net/ubuntu/+question/69374
>
> >
> >>
> >> - coloca una tarjeta de memoria en la lectora.
> >>
> >> - pasanos el comando dmesg (las ultimas lineas).
> >
> > Las últimas tres lÃneas son:
> > [ 47.981660] CPU1 attaching sched-domain:
> > [ 47.981662] domain 0: span 0-1 level CPU
> > [ 47.981664] groups: 1 0
> >
>
> porque las ultimas 3 ?? pasamos por lo menos, las ultimas 50..!!! :)
>
> pero lo que nos tenes que pasar, es despues de que hayas puesto una
> tarjeta de memoria dentro del lector..!!!
>
>
> >> - pasanos la salida del comando fdisk -l
> >
> > Disco /dev/sda: 320.0 GB, 320072933376 bytes
> > 255 cabezas, 63 sectores/pista, 38913 cilindros
> > Unidades = cilindros de 16065 * 512 = 8225280 bytes
> > Identificador de disco: 0x0008030f
> >
> > Disposit. Inicio Comienzo Fin Bloques Id Sistema
> > /dev/sda1 * 1 37879 304263036 83 Linux
> > /dev/sda2 37880 38913 8305605 5 Extendida
> > /dev/sda5 37880 38913 8305573+ 82 Linux swap /
> Solaris
> >
>
> me imagino que pusiste una tarjeta de memoria en el lector, y despues
> ejecutaste el comando, no ??
>
> porque sino, tendras que hacerlo de nuevo... :)
>
> salu2
>
aca va lo que tira el comando con la tarjeta puesta:
[ 0.780308] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15)
*0, disabled.
[ 0.780535] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15)
*0, disabled.
[ 0.780754] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15)
*0, disabled.
[ 0.780907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15)
*0, disabled.
[ 0.781185] ACPI: WMI: Mapper loaded
[ 0.781229] SCSI subsystem initialized
[ 0.781229] libata version 3.00 loaded.
[ 0.781229] usbcore: registered new interface driver usbfs
[ 0.781229] usbcore: registered new interface driver hub
[ 0.781229] usbcore: registered new device driver usb
[ 0.781229] PCI: Using ACPI for IRQ routing
[ 0.784014] Bluetooth: Core ver 2.13
[ 0.784023] NET: Registered protocol family 31
[ 0.784023] Bluetooth: HCI device and connection manager initialized
[ 0.784023] Bluetooth: HCI socket layer initialized
[ 0.784023] NET: Registered protocol family 8
[ 0.784023] NET: Registered protocol family 20
[ 0.784031] NetLabel: Initializing
[ 0.784033] NetLabel: domain hash size = 128
[ 0.784035] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.784048] NetLabel: unlabeled traffic allowed by default
[ 0.784098] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 2303, 0
[ 0.784103] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.788050] hpet: hpet2 irq 2303 for MSI
[ 0.788087] AppArmor: AppArmor Filesystem Enabled
[ 0.792029] Switched to high resolution mode on CPU 0
[ 0.792301] Switched to high resolution mode on CPU 1
[ 0.792310] pnp: PnP ACPI init
[ 0.792318] ACPI: bus type pnp registered
[ 0.797374] pnp: PnP ACPI: found 12 devices
[ 0.797376] ACPI: ACPI bus type pnp unregistered
[ 0.797379] PnPBIOS: Disabled by ACPI PNP
[ 0.797389] system 00:01: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 0.797392] system 00:01: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.797401] system 00:09: ioport range 0x400-0x4cf has been reserved
[ 0.797404] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.797407] system 00:09: ioport range 0x4d6-0x4d6 has been reserved
[ 0.797409] system 00:09: ioport range 0x680-0x6ff has been reserved
[ 0.797412] system 00:09: ioport range 0x77a-0x77a has been reserved
[ 0.797415] system 00:09: ioport range 0xc00-0xc01 has been reserved
[ 0.797417] system 00:09: ioport range 0xc14-0xc14 has been reserved
[ 0.797420] system 00:09: ioport range 0xc50-0xc52 has been reserved
[ 0.797423] system 00:09: ioport range 0xc6c-0xc6c has been reserved
[ 0.797425] system 00:09: ioport range 0xc6f-0xc6f has been reserved
[ 0.797428] system 00:09: ioport range 0xcd0-0xcdb has been reserved
[ 0.797434] system 00:0a: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.797437] system 00:0a: iomem range 0xfff00000-0xffffffff has been
reserved
[ 0.832402] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.832406] pci 0000:00:01.0: IO window: 0x5000-0x5fff
[ 0.832410] pci 0000:00:01.0: MEM window: 0xd2200000-0xd23fffff
[ 0.832414] pci 0000:00:01.0: PREFETCH window:
0x000000c0000000-0x000000cfffffff
[ 0.832419] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.832422] pci 0000:00:04.0: IO window: 0x3000-0x4fff
[ 0.832426] pci 0000:00:04.0: MEM window: 0xd1200000-0xd21fffff
[ 0.832429] pci 0000:00:04.0: PREFETCH window:
0x000000d0000000-0x000000d0ffffff
[ 0.832434] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08
[ 0.832436] pci 0000:00:05.0: IO window: disabled
[ 0.832440] pci 0000:00:05.0: MEM window: 0xd1100000-0xd11fffff
[ 0.832443] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.832449] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
[ 0.832452] pci 0000:00:06.0: IO window: 0x2000-0x2fff
[ 0.832456] pci 0000:00:06.0: MEM window: 0xb0000000-0xb00fffff
[ 0.832459] pci 0000:00:06.0: PREFETCH window:
0x000000d1000000-0x000000d10fffff
[ 0.832464] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80
[ 0.832482] pci 0000:00:14.4: IO window: 0x1000-0x1fff
[ 0.832488] pci 0000:00:14.4: MEM window: disabled
[ 0.832492] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.832523] pci 0000:00:01.0: setting latency timer to 64
[ 0.832533] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.832537] pci 0000:00:04.0: setting latency timer to 64
[ 0.832543] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.832547] pci 0000:00:05.0: setting latency timer to 64
[ 0.832554] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.832558] pci 0000:00:06.0: setting latency timer to 64
[ 0.832566] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.832569] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.832571] bus: 01 index 0 io port: [0x5000-0x5fff]
[ 0.832573] bus: 01 index 1 mmio: [0xd2200000-0xd23fffff]
[ 0.832575] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]
[ 0.832577] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.832579] bus: 02 index 0 io port: [0x3000-0x4fff]
[ 0.832582] bus: 02 index 1 mmio: [0xd1200000-0xd21fffff]
[ 0.832584] bus: 02 index 2 mmio: [0xd0000000-0xd0ffffff]
[ 0.832586] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.832588] bus: 08 index 0 mmio: [0x0-0x0]
[ 0.832590] bus: 08 index 1 mmio: [0xd1100000-0xd11fffff]
[ 0.832592] bus: 08 index 2 mmio: [0x0-0x0]
[ 0.832593] bus: 08 index 3 mmio: [0x0-0x0]
[ 0.832595] bus: 09 index 0 io port: [0x2000-0x2fff]
[ 0.832597] bus: 09 index 1 mmio: [0xb0000000-0xb00fffff]
[ 0.832600] bus: 09 index 2 mmio: [0xd1000000-0xd10fffff]
[ 0.832602] bus: 09 index 3 mmio: [0x0-0x0]
[ 0.832604] bus: 80 index 0 io port: [0x1000-0x1fff]
[ 0.832606] bus: 80 index 1 mmio: [0x0-0x0]
[ 0.832607] bus: 80 index 2 mmio: [0x0-0x0]
[ 0.832609] bus: 80 index 3 io port: [0x00-0xffff]
[ 0.832611] bus: 80 index 4 mmio: [0x000000-0xffffffff]
[ 0.832623] NET: Registered protocol family 2
[ 0.844580] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.844855] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.845456] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.845729] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.845731] TCP reno registered
[ 0.848617] NET: Registered protocol family 1
[ 0.848742] checking if image is initramfs... it is
[ 1.500565] Clocksource tsc unstable (delta = -98443657 ns)
[ 1.698502] Freeing initrd memory: 7368k freed
[ 1.698576] Simple Boot Flag at 0x44 set to 0x1
[ 1.698857] cpufreq: No nForce2 chipset.
[ 1.698984] audit: initializing netlink socket (disabled)
[ 1.698998] type=2000 audit(1244218695.696:1): initialized
[ 1.707061] highmem bounce pool size: 64 pages
[ 1.707067] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.708283] VFS: Disk quotas dquot_6.5.1
[ 1.708335] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.709008] fuse init (API version 7.10)
[ 1.709089] msgmni has been set to 1678
[ 1.709342] alg: No test for stdrng (krng)
[ 1.709359] io scheduler noop registered
[ 1.709362] io scheduler anticipatory registered
[ 1.709364] io scheduler deadline registered
[ 1.709380] io scheduler cfq registered (default)
[ 1.896104] pci 0000:01:05.0: Boot video device
[ 1.896322] _OSC request fails
[ 1.899721] _OSC request fails
[ 1.902415] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.902449] pcieport-driver 0000:00:04.0: found MSI capability
[ 1.902475] pcieport-driver 0000:00:04.0: irq 2302 for MSI/MSI-X
[ 1.902486] pci_express 0000:00:04.0:pcie00: allocate port service
[ 1.902505] pci_express 0000:00:04.0:pcie02: allocate port service
[ 1.902516] pci_express 0000:00:04.0:pcie03: allocate port service
[ 1.902565] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 1.902595] pcieport-driver 0000:00:05.0: found MSI capability
[ 1.902616] pcieport-driver 0000:00:05.0: irq 2301 for MSI/MSI-X
[ 1.902626] pci_express 0000:00:05.0:pcie00: allocate port service
[ 1.902638] pci_express 0000:00:05.0:pcie03: allocate port service
[ 1.902683] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 1.902713] pcieport-driver 0000:00:06.0: found MSI capability
[ 1.902734] pcieport-driver 0000:00:06.0: irq 2300 for MSI/MSI-X
[ 1.902744] pci_express 0000:00:06.0:pcie00: allocate port service
[ 1.902756] pci_express 0000:00:06.0:pcie03: allocate port service
[ 1.902814] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.902901] _OSC request fails
[ 1.902932] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.904621] ACPI: AC Adapter [ACAD] (on-line)
[ 1.985146] ACPI: Battery Slot [BAT0] (battery present)
[ 1.985246] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.985249] ACPI: Power Button (FF) [PWRF]
[ 1.985288] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.985291] ACPI: Power Button (CM) [PWRB]
[ 1.985340] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.985342] ACPI: Sleep Button (CM) [SLPB]
[ 1.985391] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.986405] ACPI: Lid Switch [LID]
[ 1.986748] processor ACPI_CPU:00: registered as cooling_device0
[ 1.986758] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.986839] processor ACPI_CPU:01: registered as cooling_device1
[ 1.996310] ACPI Exception (thermal-0377): AE_OK, No or invalid critical
threshold [20080926]
[ 1.996380] isapnp: Scanning for PnP cards...
[ 2.381033] isapnp: No Plug & Play device found
[ 2.392872] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.393864] brd: module loaded
[ 2.394176] loop: module loaded
[ 2.394243] Fixed MDIO Bus: probed
[ 2.394249] PPP generic driver version 2.4.2
[ 2.394308] input: Macintosh mouse button emulation as
/devices/virtual/input/input4
[ 2.394337] Driver 'sd' needs updating - please use bus_type methods
[ 2.394346] Driver 'sr' needs updating - please use bus_type methods
[ 2.394383] ahci 0000:00:11.0: version 3.0
[ 2.394438] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.394633] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps
0x3f impl SATA mode
[ 2.394636] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio
[ 2.395538] scsi0 : ahci
[ 2.395755] scsi1 : ahci
[ 2.395974] scsi2 : ahci
[ 2.396191] scsi3 : ahci
[ 2.396413] scsi4 : ahci
[ 2.396665] scsi5 : ahci
[ 2.396706] ata1: SATA max UDMA/133 abar m1024 en 0xd2409000 port 0xd2409100
irq 22
[ 2.396710] ata2: SATA max UDMA/133 abar m1024 en 0xd2409000 port 0xd2409180
irq 22
[ 2.396713] ata3: SATA max UDMA/133 abar m1024 en 0xd2409000 port 0xd2409200
irq 22
[ 2.396717] ata4: SATA max UDMA/133 abar m1024 en 0xd2409000 port 0xd2409280
irq 22
[ 2.396721] ata5: SATA max UDMA/133 abar m1024 en 0xd2409000 port 0xd2409300
irq 22
[ 2.396724] ata6: SATA max UDMA/133 abar m1024 en 0xd2409000 port 0xd2409380
irq 22
[ 2.880366] ata1: softreset failed (device not ready)
[ 2.880406] ata1: failed due to HW bug, retry pmp=0
[ 3.044378] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.085115] ata1.00: ATA-8: WDC WD3200BEKT-00F3T0, 11.01A11, max UDMA/133
[ 3.085118] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.087781] ata1.00: configured for UDMA/133
[ 3.568366] ata2: softreset failed (device not ready)
[ 3.568403] ata2: failed due to HW bug, retry pmp=0
[ 3.732378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.746688] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633L, 0400, max UDMA/100
[ 3.760421] ata2.00: configured for UDMA/100
[ 4.080091] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.400090] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.720091] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.040091] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.040199] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-0
11.0 PQ: 0 ANSI: 5
[ 5.040289] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320
GB/298 GiB)
[ 5.040306] sd 0:0:0:0: [sda] Write Protect is off
[ 5.040309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.040334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.040411] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320
GB/298 GiB)
[ 5.040426] sd 0:0:0:0: [sda] Write Protect is off
[ 5.040428] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.040452] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.040456] sda: sda1 sda2 < sda5 >
[ 5.091418] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.091466] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.093695] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633L
0400 PQ: 0 ANSI: 5
[ 5.101618] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
cdda tray
[ 5.101621] Uniform CD-ROM driver Revision: 3.20
[ 5.101716] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.101750] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.102060] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 5.102144] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 5.102262] scsi6 : pata_atiixp
[ 5.102487] scsi7 : pata_atiixp
[ 5.103206] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6000 irq
14
[ 5.103209] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq
15
[ 5.103274] ata7: port disabled. ignoring.
[ 5.256895] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.256948] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 5.256970] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 5.256973] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 5.257030] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 5.257090] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze
workaround
[ 5.257110] ehci_hcd 0000:00:12.2: debug port 1
[ 5.257129] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2409500
[ 5.268076] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 5.268153] usb usb1: configuration #1 chosen from 1 choice
[ 5.268180] hub 1-0:1.0: USB hub found
[ 5.268188] hub 1-0:1.0: 6 ports detected
[ 5.268369] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 5.268382] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 5.268385] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 5.268428] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 5.268486] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze
workaround
[ 5.268518] ehci_hcd 0000:00:13.2: debug port 1
[ 5.268536] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2409400
[ 5.280077] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 5.280136] usb usb2: configuration #1 chosen from 1 choice
[ 5.280158] hub 2-0:1.0: USB hub found
[ 5.280165] hub 2-0:1.0: 6 ports detected
[ 5.280291] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.280341] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 5.280352] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 5.280356] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 5.280395] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus
number 3
[ 5.280457] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2408000
[ 5.340197] usb usb3: configuration #1 chosen from 1 choice
[ 5.340221] hub 3-0:1.0: USB hub found
[ 5.340230] hub 3-0:1.0: 3 ports detected
[ 5.340343] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 5.340355] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 5.340358] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 5.340399] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus
number 4
[ 5.340452] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2407000
[ 5.396107] usb usb4: configuration #1 chosen from 1 choice
[ 5.396129] hub 4-0:1.0: USB hub found
[ 5.396172] hub 4-0:1.0: 3 ports detected
[ 5.396291] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 5.396302] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 5.396306] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 5.396348] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 5
[ 5.396406] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2406000
[ 5.452102] usb usb5: configuration #1 chosen from 1 choice
[ 5.452124] hub 5-0:1.0: USB hub found
[ 5.452167] hub 5-0:1.0: 3 ports detected
[ 5.452287] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 5.452299] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 5.452303] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 5.452349] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 6
[ 5.452397] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2405000
[ 5.508104] usb usb6: configuration #1 chosen from 1 choice
[ 5.508127] hub 6-0:1.0: USB hub found
[ 5.508171] hub 6-0:1.0: 3 ports detected
[ 5.508286] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 5.508297] ohci_hcd 0000:00:14.5: setting latency timer to 64
[ 5.508301] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 5.508341] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus
number 7
[ 5.508395] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd2404000
[ 5.564102] usb usb7: configuration #1 chosen from 1 choice
[ 5.564125] hub 7-0:1.0: USB hub found
[ 5.564168] hub 7-0:1.0: 2 ports detected
[ 5.564283] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.564365] usbcore: registered new interface driver libusual
[ 5.564396] usbcore: registered new interface driver usbserial
[ 5.564406] USB Serial support registered for generic
[ 5.580071] usb 1-4: new high speed USB device using ehci_hcd and address
2
[ 5.962689] usb 1-4: configuration #1 chosen from 1 choice
[ 6.132103] usb 2-2: new high speed USB device using ehci_hcd and address
3
[ 6.299031] usb 2-2: configuration #1 chosen from 1 choice
[ 6.676164] usb 5-1: new low speed USB device using ohci_hcd and address
2
[ 6.846717] usb 5-1: configuration #1 chosen from 1 choice
[ 7.116058] usb 6-1: new full speed USB device using ohci_hcd and address
2
[ 7.298103] usb 6-1: configuration #1 chosen from 1 choice
[ 7.436163] usb 7-1: new full speed USB device using ohci_hcd and address
2
[ 7.601070] usb 7-1: configuration #1 chosen from 1 choice
[ 7.736164] usb 7-2: new full speed USB device using ohci_hcd and address
3
[ 7.903052] usb 7-2: configuration #1 chosen from 1 choice
[ 7.905252] usbcore: registered new interface driver usbserial_generic
[ 7.905254] usbserial: USB Serial Driver core
[ 7.905297] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 7.926866] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.926873] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.928583] mice: PS/2 mouse device common for all mice
[ 7.948616] rtc_cmos 00:05: RTC can wake from S4
[ 7.948651] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 7.948681] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 7.948753] device-mapper: uevent: version 1.0.3
[ 7.948924] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel en redhat.com
[ 7.949289] device-mapper: multipath: version 1.0.5 loaded
[ 7.949292] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 7.949576] EISA: Probing bus 0 at eisa.0
[ 7.949585] Cannot allocate resource for EISA slot 1
[ 7.949587] Cannot allocate resource for EISA slot 2
[ 7.949589] Cannot allocate resource for EISA slot 3
[ 7.949591] Cannot allocate resource for EISA slot 4
[ 7.949593] Cannot allocate resource for EISA slot 5
[ 7.949595] Cannot allocate resource for EISA slot 6
[ 7.949606] EISA: Detected 0 cards.
[ 7.949790] cpuidle: using governor ladder
[ 7.949792] cpuidle: using governor menu
[ 7.950286] TCP cubic registered
[ 7.950381] NET: Registered protocol family 10
[ 7.950794] lo: Disabled Privacy Extensions
[ 7.951093] NET: Registered protocol family 17
[ 7.951110] Bluetooth: L2CAP ver 2.11
[ 7.951112] Bluetooth: L2CAP socket layer initialized
[ 7.951115] Bluetooth: SCO (Voice Link) ver 0.6
[ 7.951117] Bluetooth: SCO socket layer initialized
[ 7.951216] Bluetooth: RFCOMM socket layer initialized
[ 7.951223] Bluetooth: RFCOMM TTY layer initialized
[ 7.951225] Bluetooth: RFCOMM ver 1.10
[ 7.951287] powernow-k8: Found 1 AMD Turion(tm) X2 Dual-Core Mobile RM-70
processors (2 cpu cores) (version 2.20.00)
[ 7.951367] powernow-k8: 0 : pstate 0 (2000 MHz)
[ 7.951373] powernow-k8: 1 : pstate 1 (1000 MHz)
[ 7.951377] powernow-k8: 2 : pstate 2 (500 MHz)
[ 7.952732] Using IPI No-Shortcut mode
[ 7.952814] registered taskstats version 1
[ 7.952971] Magic number: 13:342:337
[ 7.953009] tty tty58: hash matches
[ 7.953121] rtc_cmos 00:05: setting system clock to 2009-06-05 16:18:23
UTC (1244218703)
[ 7.953124] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 7.953126] EDD information not available.
[ 7.953549] Freeing unused kernel memory: 532k freed
[ 7.953805] Write protecting the kernel text: 4128k
[ 7.953897] Write protecting the kernel read-only data: 1532k
[ 7.977402] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[ 8.224579] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.224601] r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[ 8.224620] r8169 0000:09:00.0: setting latency timer to 64
[ 8.224715] r8169 0000:09:00.0: irq 2299 for MSI/MSI-X
[ 8.225314] eth0: RTL8168c/8111c at 0xf7c78000, 00:1e:68:e6:ed:b0, XID
3c4000c0 IRQ 2299
[ 8.291821] usbcore: registered new interface driver hiddev
[ 8.295910] input: Microsoft Microsoft 3-Button Mouse with IntelliEye? as
/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input6
[ 8.316255] generic-usb 0003:045E:007D.0001: input,hidraw0: USB HID v1.00
Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on
usb-0000:00:13.0-1/input0
[ 8.316319] usbcore: registered new interface driver usbhid
[ 8.316323] usbhid: v2.6:USB HID core driver
[ 8.527085] PM: Starting manual resume from disk
[ 8.527089] PM: Resume from partition 8:5
[ 8.527091] PM: Checking hibernation image.
[ 8.527279] PM: Resume from disk failed.
[ 8.575331] kjournald starting. Commit interval 5 seconds
[ 8.575344] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.920050] udev: starting version 141
[ 14.039446] ieee80211_crypt: registered algorithm 'NULL'
[ 14.044005] wl: module license '' taints kernel.
[ 14.046206] wl 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.046216] wl 0000:08:00.0: setting latency timer to 64
[ 14.069406] ieee80211_crypt: registered algorithm 'TKIP'
[ 14.070757] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.79.10
[ 14.087924] acpi device:05: registered as cooling_device2
[ 14.088294] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
[ 14.098592] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid
0 ss_did 0
[ 14.098597] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 14.098672] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.112725] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 14.128649] Linux agpgart interface v0.103
[ 14.140104] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 14.140251] usbcore: registered new interface driver btusb
[ 14.234151] [fglrx] Maximum main memory to use for locked dma buffers:
2628 MBytes.
[ 14.234180] [fglrx] vendor: 1002 device: 9612 count: 1
[ 14.234465] [fglrx] ioport: bar 1, base 0x5000, size: 0x100
[ 14.234485] pci 0000:01:05.0: power state changed by ACPI to D0
[ 14.234496] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.234502] pci 0000:01:05.0: setting latency timer to 64
[ 14.235174] [fglrx] Driver built-in PAT support is enabled successfully
[ 14.235277] [fglrx] module loaded - fglrx 8.60.40 [Mar 14 2009] with 1
minors
[ 14.261906] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 14.296881] input: Wacom ISDv4 93 as
/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/input/input9
[ 14.325800] input: Wacom ISDv4 93 as
/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input10
[ 14.348695] usbcore: registered new interface driver wacom
[ 14.348754] wacom: v1.49-pc-1:USB Wacom Graphire and Wacom Intuos tablet
driver
[ 14.361795] Linux video capture interface: v2.00
[ 14.362831] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 14.405773] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a104)
[ 14.408104] input: HP Webcam as
/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input11
[ 14.417318] usbcore: registered new interface driver uvcvideo
[ 14.417377] USB Video Class driver (v0.1.0)
[ 14.450678] synaptics was reset on resume, see synaptics_resume_reset if
you have trouble on resume
[ 14.613970] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 14.614224] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 15.006649] lp: driver loaded but no devices found
[ 15.140880] Adding 8305564k swap on /dev/sda5. Priority:-1 extents:1
across:8305564k
[ 15.475735] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps:
0xa04711/0xa00000
[ 15.544619] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input12
[ 15.683929] EXT3 FS on sda1, internal journal
[ 16.791403] type=1505 audit(1244218712.334:2): operation="profile_load"
name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2298
[ 16.844876] type=1505 audit(1244218712.390:3): operation="profile_load"
name="/sbin/dhclient-script" name2="default" pid=2302
[ 16.845024] type=1505 audit(1244218712.390:4): operation="profile_load"
name="/sbin/dhclient3" name2="default" pid=2302
[ 16.845076] type=1505 audit(1244218712.390:5): operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default"
pid=2302
[ 16.845123] type=1505 audit(1244218712.390:6): operation="profile_load"
name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2302
[ 16.998528] type=1505 audit(1244218712.543:7): operation="profile_load"
name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2307
[ 16.998733] type=1505 audit(1244218712.543:8): operation="profile_load"
name="/usr/sbin/cupsd" name2="default" pid=2307
[ 17.030143] type=1505 audit(1244218712.575:9): operation="profile_load"
name="/usr/sbin/tcpdump" name2="default" pid=2311
[ 22.226575] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.226579] Bluetooth: BNEP filters: protocol multicast
[ 22.239170] Bridge firewalling registered
[ 23.908544] ppdev: user-space parallel port driver
[ 26.114077] [fglrx] GART Table is not in FRAME_BUFFER range
[ 26.119235] fglrx_pci 0000:01:05.0: irq 2298 for MSI/MSI-X
[ 26.130891] [fglrx] Firegl kernel thread PID: 3395
[ 26.141884] APIC error on CPU0: 00(08)
[ 26.141889] APIC error on CPU1: 00(08)
[ 26.167126] [fglrx] Gart USWC size:1320 M.
[ 26.167130] [fglrx] Gart cacheable size:60 M.
[ 26.167137] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 26.167141] [fglrx] Reserved FB block: Unshared offset:13ffb000,
size:5000
[ 27.456438] r8169: eth0: link down
[ 27.456661] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.304036] eth1: no IPv6 routers present
[ 47.980824] CPU0 attaching NULL sched-domain.
[ 47.980832] CPU1 attaching NULL sched-domain.
[ 47.981648] CPU0 attaching sched-domain:
[ 47.981651] domain 0: span 0-1 level CPU
[ 47.981654] groups: 0 1
[ 47.981660] CPU1 attaching sched-domain:
[ 47.981662] domain 0: span 0-1 level CPU
[ 47.981664] groups: 1 0
>
> --
> Marco Antonio de Hoyos
> 15-5157-2322 // 4268-1557
> Claypole - Pcia. de Bs. As.- Argentina
> ICQ#92702911 / jabber: mhoyos en jabber.org
> ----------------------------------------------------------
> http://tecnicoslinux.com.ar |-| http://trekkingfotos.com.ar
>
> --
> Ubuntu-ar lista de correo
> Ubuntu-ar en lists.ubuntu.com
> Modifica tus opciones o desuscribite en:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ar
> Siempre leer, comprender y aplicar nuestra etiqueta:
> https://wiki.ubuntu.com/ArgentinaTeam/EtiquetaML
>
>
------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: https://lists.ubuntu.com/archives/ubuntu-ar/attachments/20090605/77b5f9a0/attachment-0001.htm
More information about the Ubuntu-ar
mailing list