<br><br><div class="gmail_quote">El 5 de junio de 2009 14:17, Marco Antonio <span dir="ltr">&lt;<a href="mailto:mhoyos@gmail.com">mhoyos@gmail.com</a>&gt;</span> escribió:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

El 5 de junio de 2009 13:28, Agustín Argañaraz&lt;<a href="mailto:aarganaraz@gmail.com">aarganaraz@gmail.com</a>&gt; escribió:<br>
<div class="im">&gt;<br>
<br>
&gt;<br>
&gt; Bus 002 Device 003: ID 064e:a104 Suyin Corp.<br>
<br>
</div>esto corresponde al lector de tarjetas...<br>
<br>
<a href="https://answers.launchpad.net/ubuntu/+question/69374" target="_blank">https://answers.launchpad.net/ubuntu/+question/69374</a><br>
<div class="im"><br>
&gt;<br>
&gt;&gt;<br>
&gt;&gt; - coloca una tarjeta de memoria en la lectora.<br>
&gt;&gt;<br>
&gt;&gt; - pasanos el comando dmesg (las ultimas lineas).<br>
&gt;<br>
&gt;  Las últimas tres líneas son:<br>
&gt; [   47.981660] CPU1 attaching sched-domain:<br>
&gt; [   47.981662]  domain 0: span 0-1 level CPU<br>
&gt; [   47.981664]   groups: 1 0<br>
&gt;<br>
<br>
</div>porque las ultimas 3 ?? pasamos por lo menos, las ultimas 50..!!! :)<br>
<br>
pero lo que nos tenes que pasar, es despues de que hayas puesto una<br>
tarjeta de memoria dentro del lector..!!!<br>
<div class="im"><br>
<br>
&gt;&gt; - pasanos la salida del comando fdisk -l<br>
&gt;<br>
&gt; Disco /dev/sda: 320.0 GB, 320072933376 bytes<br>
&gt; 255 cabezas, 63 sectores/pista, 38913 cilindros<br>
&gt; Unidades = cilindros de 16065 * 512 = 8225280 bytes<br>
&gt; Identificador de disco: 0x0008030f<br>
&gt;<br>
&gt; Disposit. Inicio    Comienzo      Fin      Bloques  Id  Sistema<br>
&gt; /dev/sda1   *           1       37879   304263036   83  Linux<br>
&gt; /dev/sda2           37880       38913     8305605    5  Extendida<br>
&gt; /dev/sda5           37880       38913     8305573+  82  Linux swap / Solaris<br>
&gt;<br>
<br>
</div>me imagino que pusiste una tarjeta de memoria en el lector, y despues<br>
ejecutaste el comando, no ??<br>
<br>
porque sino, tendras que hacerlo de nuevo... :)<br>
<div><div></div><div class="h5"><br>
salu2</div></div></blockquote><div><br>aca va lo que tira el comando con la tarjeta puesta:<br>[    0.780308] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.<br>[    0.780535] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.<br>

[    0.780754] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.<br>[    0.780907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.<br>[    0.781185] ACPI: WMI: Mapper loaded<br>

[    0.781229] SCSI subsystem initialized<br>[    0.781229] libata version 3.00 loaded.<br>[    0.781229] usbcore: registered new interface driver usbfs<br>[    0.781229] usbcore: registered new interface driver hub<br>[    0.781229] usbcore: registered new device driver usb<br>

[    0.781229] PCI: Using ACPI for IRQ routing<br>[    0.784014] Bluetooth: Core ver 2.13<br>[    0.784023] NET: Registered protocol family 31<br>[    0.784023] Bluetooth: HCI device and connection manager initialized<br>

[    0.784023] Bluetooth: HCI socket layer initialized<br>[    0.784023] NET: Registered protocol family 8<br>[    0.784023] NET: Registered protocol family 20<br>[    0.784031] NetLabel: Initializing<br>[    0.784033] NetLabel:  domain hash size = 128<br>

[    0.784035] NetLabel:  protocols = UNLABELED CIPSOv4<br>[    0.784048] NetLabel:  unlabeled traffic allowed by default<br>[    0.784098] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 2303, 0<br>[    0.784103] hpet0: 4 comparators, 32-bit 14.318180 MHz counter<br>

[    0.788050] hpet: hpet2 irq 2303 for MSI<br>[    0.788087] AppArmor: AppArmor Filesystem Enabled<br>[    0.792029] Switched to high resolution mode on CPU 0<br>[    0.792301] Switched to high resolution mode on CPU 1<br>

[    0.792310] pnp: PnP ACPI init<br>[    0.792318] ACPI: bus type pnp registered<br>[    0.797374] pnp: PnP ACPI: found 12 devices<br>[    0.797376] ACPI: ACPI bus type pnp unregistered<br>[    0.797379] PnPBIOS: Disabled by ACPI PNP<br>

[    0.797389] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved<br>[    0.797392] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved<br>[    0.797401] system 00:09: ioport range 0x400-0x4cf has been reserved<br>

[    0.797404] system 00:09: ioport range 0x4d0-0x4d1 has been reserved<br>[    0.797407] system 00:09: ioport range 0x4d6-0x4d6 has been reserved<br>[    0.797409] system 00:09: ioport range 0x680-0x6ff has been reserved<br>

[    0.797412] system 00:09: ioport range 0x77a-0x77a has been reserved<br>[    0.797415] system 00:09: ioport range 0xc00-0xc01 has been reserved<br>[    0.797417] system 00:09: ioport range 0xc14-0xc14 has been reserved<br>

[    0.797420] system 00:09: ioport range 0xc50-0xc52 has been reserved<br>[    0.797423] system 00:09: ioport range 0xc6c-0xc6c has been reserved<br>[    0.797425] system 00:09: ioport range 0xc6f-0xc6f has been reserved<br>

[    0.797428] system 00:09: ioport range 0xcd0-0xcdb has been reserved<br>[    0.797434] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved<br>[    0.797437] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved<br>

[    0.832402] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01<br>[    0.832406] pci 0000:00:01.0:   IO window: 0x5000-0x5fff<br>[    0.832410] pci 0000:00:01.0:   MEM window: 0xd2200000-0xd23fffff<br>[    0.832414] pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff<br>

[    0.832419] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02<br>[    0.832422] pci 0000:00:04.0:   IO window: 0x3000-0x4fff<br>[    0.832426] pci 0000:00:04.0:   MEM window: 0xd1200000-0xd21fffff<br>[    0.832429] pci 0000:00:04.0:   PREFETCH window: 0x000000d0000000-0x000000d0ffffff<br>

[    0.832434] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08<br>[    0.832436] pci 0000:00:05.0:   IO window: disabled<br>[    0.832440] pci 0000:00:05.0:   MEM window: 0xd1100000-0xd11fffff<br>[    0.832443] pci 0000:00:05.0:   PREFETCH window: disabled<br>

[    0.832449] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09<br>[    0.832452] pci 0000:00:06.0:   IO window: 0x2000-0x2fff<br>[    0.832456] pci 0000:00:06.0:   MEM window: 0xb0000000-0xb00fffff<br>[    0.832459] pci 0000:00:06.0:   PREFETCH window: 0x000000d1000000-0x000000d10fffff<br>

[    0.832464] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80<br>[    0.832482] pci 0000:00:14.4:   IO window: 0x1000-0x1fff<br>[    0.832488] pci 0000:00:14.4:   MEM window: disabled<br>[    0.832492] pci 0000:00:14.4:   PREFETCH window: disabled<br>

[    0.832523] pci 0000:00:01.0: setting latency timer to 64<br>[    0.832533] pci 0000:00:04.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>[    0.832537] pci 0000:00:04.0: setting latency timer to 64<br>[    0.832543] pci 0000:00:05.0: PCI INT A -&gt; GSI 17 (level, low) -&gt; IRQ 17<br>

[    0.832547] pci 0000:00:05.0: setting latency timer to 64<br>[    0.832554] pci 0000:00:06.0: PCI INT A -&gt; GSI 18 (level, low) -&gt; IRQ 18<br>[    0.832558] pci 0000:00:06.0: setting latency timer to 64<br>[    0.832566] bus: 00 index 0 io port: [0x00-0xffff]<br>

[    0.832569] bus: 00 index 1 mmio: [0x000000-0xffffffff]<br>[    0.832571] bus: 01 index 0 io port: [0x5000-0x5fff]<br>[    0.832573] bus: 01 index 1 mmio: [0xd2200000-0xd23fffff]<br>[    0.832575] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]<br>

[    0.832577] bus: 01 index 3 mmio: [0x0-0x0]<br>[    0.832579] bus: 02 index 0 io port: [0x3000-0x4fff]<br>[    0.832582] bus: 02 index 1 mmio: [0xd1200000-0xd21fffff]<br>[    0.832584] bus: 02 index 2 mmio: [0xd0000000-0xd0ffffff]<br>

[    0.832586] bus: 02 index 3 mmio: [0x0-0x0]<br>[    0.832588] bus: 08 index 0 mmio: [0x0-0x0]<br>[    0.832590] bus: 08 index 1 mmio: [0xd1100000-0xd11fffff]<br>[    0.832592] bus: 08 index 2 mmio: [0x0-0x0]<br>[    0.832593] bus: 08 index 3 mmio: [0x0-0x0]<br>

[    0.832595] bus: 09 index 0 io port: [0x2000-0x2fff]<br>[    0.832597] bus: 09 index 1 mmio: [0xb0000000-0xb00fffff]<br>[    0.832600] bus: 09 index 2 mmio: [0xd1000000-0xd10fffff]<br>[    0.832602] bus: 09 index 3 mmio: [0x0-0x0]<br>

[    0.832604] bus: 80 index 0 io port: [0x1000-0x1fff]<br>[    0.832606] bus: 80 index 1 mmio: [0x0-0x0]<br>[    0.832607] bus: 80 index 2 mmio: [0x0-0x0]<br>[    0.832609] bus: 80 index 3 io port: [0x00-0xffff]<br>[    0.832611] bus: 80 index 4 mmio: [0x000000-0xffffffff]<br>

[    0.832623] NET: Registered protocol family 2<br>[    0.844580] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)<br>[    0.844855] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)<br>

[    0.845456] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)<br>[    0.845729] TCP: Hash tables configured (established 131072 bind 65536)<br>[    0.845731] TCP reno registered<br>[    0.848617] NET: Registered protocol family 1<br>

[    0.848742] checking if image is initramfs... it is<br>[    1.500565] Clocksource tsc unstable (delta = -98443657 ns)<br>[    1.698502] Freeing initrd memory: 7368k freed<br>[    1.698576] Simple Boot Flag at 0x44 set to 0x1<br>

[    1.698857] cpufreq: No nForce2 chipset.<br>[    1.698984] audit: initializing netlink socket (disabled)<br>[    1.698998] type=2000 audit(1244218695.696:1): initialized<br>[    1.707061] highmem bounce pool size: 64 pages<br>

[    1.707067] HugeTLB registered 4 MB page size, pre-allocated 0 pages<br>[    1.708283] VFS: Disk quotas dquot_6.5.1<br>[    1.708335] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)<br>[    1.709008] fuse init (API version 7.10)<br>

[    1.709089] msgmni has been set to 1678<br>[    1.709342] alg: No test for stdrng (krng)<br>[    1.709359] io scheduler noop registered<br>[    1.709362] io scheduler anticipatory registered<br>[    1.709364] io scheduler deadline registered<br>

[    1.709380] io scheduler cfq registered (default)<br>[    1.896104] pci 0000:01:05.0: Boot video device<br>[    1.896322] _OSC request fails<br>[    1.899721] _OSC request fails<br>[    1.902415] pcieport-driver 0000:00:04.0: setting latency timer to 64<br>

[    1.902449] pcieport-driver 0000:00:04.0: found MSI capability<br>[    1.902475] pcieport-driver 0000:00:04.0: irq 2302 for MSI/MSI-X<br>[    1.902486] pci_express 0000:00:04.0:pcie00: allocate port service<br>[    1.902505] pci_express 0000:00:04.0:pcie02: allocate port service<br>

[    1.902516] pci_express 0000:00:04.0:pcie03: allocate port service<br>[    1.902565] pcieport-driver 0000:00:05.0: setting latency timer to 64<br>[    1.902595] pcieport-driver 0000:00:05.0: found MSI capability<br>[    1.902616] pcieport-driver 0000:00:05.0: irq 2301 for MSI/MSI-X<br>

[    1.902626] pci_express 0000:00:05.0:pcie00: allocate port service<br>[    1.902638] pci_express 0000:00:05.0:pcie03: allocate port service<br>[    1.902683] pcieport-driver 0000:00:06.0: setting latency timer to 64<br>

[    1.902713] pcieport-driver 0000:00:06.0: found MSI capability<br>[    1.902734] pcieport-driver 0000:00:06.0: irq 2300 for MSI/MSI-X<br>[    1.902744] pci_express 0000:00:06.0:pcie00: allocate port service<br>[    1.902756] pci_express 0000:00:06.0:pcie03: allocate port service<br>

[    1.902814] pci_hotplug: PCI Hot Plug PCI Core version: 0.5<br>[    1.902901] _OSC request fails<br>[    1.902932] pciehp: PCI Express Hot Plug Controller Driver version: 0.4<br>[    1.904621] ACPI: AC Adapter [ACAD] (on-line)<br>

[    1.985146] ACPI: Battery Slot [BAT0] (battery present)<br>[    1.985246] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0<br>[    1.985249] ACPI: Power Button (FF) [PWRF]<br>[    1.985288] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1<br>

[    1.985291] ACPI: Power Button (CM) [PWRB]<br>[    1.985340] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2<br>[    1.985342] ACPI: Sleep Button (CM) [SLPB]<br>[    1.985391] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3<br>

[    1.986405] ACPI: Lid Switch [LID]<br>[    1.986748] processor ACPI_CPU:00: registered as cooling_device0<br>[    1.986758] ACPI: Processor [CPU0] (supports 8 throttling states)<br>[    1.986839] processor ACPI_CPU:01: registered as cooling_device1<br>

[    1.996310] ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20080926]<br>[    1.996380] isapnp: Scanning for PnP cards...<br>[    2.381033] isapnp: No Plug &amp; Play device found<br>[    2.392872] Serial: 8250/16550 driver4 ports, IRQ sharing enabled<br>

[    2.393864] brd: module loaded<br>[    2.394176] loop: module loaded<br>[    2.394243] Fixed MDIO Bus: probed<br>[    2.394249] PPP generic driver version 2.4.2<br>[    2.394308] input: Macintosh mouse button emulation as /devices/virtual/input/input4<br>

[    2.394337] Driver &#39;sd&#39; needs updating - please use bus_type methods<br>[    2.394346] Driver &#39;sr&#39; needs updating - please use bus_type methods<br>[    2.394383] ahci 0000:00:11.0: version 3.0<br>[    2.394438] ahci 0000:00:11.0: PCI INT A -&gt; GSI 22 (level, low) -&gt; IRQ 22<br>

[    2.394633] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode<br>[    2.394636] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio <br>[    2.395538] scsi0 : ahci<br>[    2.395755] scsi1 : ahci<br>

[    2.395974] scsi2 : ahci<br>[    2.396191] scsi3 : ahci<br>[    2.396413] scsi4 : ahci<br>[    2.396665] scsi5 : ahci<br>[    2.396706] ata1: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409100 irq 22<br>[    2.396710] ata2: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409180 irq 22<br>

[    2.396713] ata3: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409200 irq 22<br>[    2.396717] ata4: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409280 irq 22<br>[    2.396721] ata5: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409300 irq 22<br>

[    2.396724] ata6: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409380 irq 22<br>[    2.880366] ata1: softreset failed (device not ready)<br>[    2.880406] ata1: failed due to HW bug, retry pmp=0<br>[    3.044378] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)<br>

[    3.085115] ata1.00: ATA-8: WDC WD3200BEKT-00F3T0, 11.01A11, max UDMA/133<br>[    3.085118] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)<br>[    3.087781] ata1.00: configured for UDMA/133<br>[    3.568366] ata2: softreset failed (device not ready)<br>

[    3.568403] ata2: failed due to HW bug, retry pmp=0<br>[    3.732378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)<br>[    3.746688] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633L, 0400, max UDMA/100<br>[    3.760421] ata2.00: configured for UDMA/100<br>

[    4.080091] ata3: SATA link down (SStatus 0 SControl 300)<br>[    4.400090] ata4: SATA link down (SStatus 0 SControl 300)<br>[    4.720091] ata5: SATA link down (SStatus 0 SControl 300)<br>[    5.040091] ata6: SATA link down (SStatus 0 SControl 300)<br>

[    5.040199] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEKT-0 11.0 PQ: 0 ANSI: 5<br>[    5.040289] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)<br>[    5.040306] sd 0:0:0:0: [sda] Write Protect is off<br>

[    5.040309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00<br>[    5.040334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn&#39;t support DPO or FUA<br>[    5.040411] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)<br>

[    5.040426] sd 0:0:0:0: [sda] Write Protect is off<br>[    5.040428] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00<br>[    5.040452] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn&#39;t support DPO or FUA<br>

[    5.040456]  sda: sda1 sda2 &lt; sda5 &gt;<br>[    5.091418] sd 0:0:0:0: [sda] Attached SCSI disk<br>[    5.091466] sd 0:0:0:0: Attached scsi generic sg0 type 0<br>[    5.093695] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633L  0400 PQ: 0 ANSI: 5<br>

[    5.101618] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray<br>[    5.101621] Uniform CD-ROM driver Revision: 3.20<br>[    5.101716] sr 1:0:0:0: Attached scsi CD-ROM sr0<br>[    5.101750] sr 1:0:0:0: Attached scsi generic sg1 type 5<br>

[    5.102060] pata_atiixp 0000:00:14.1: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>[    5.102144] pata_atiixp 0000:00:14.1: setting latency timer to 64<br>[    5.102262] scsi6 : pata_atiixp<br>[    5.102487] scsi7 : pata_atiixp<br>

[    5.103206] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6000 irq 14<br>[    5.103209] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq 15<br>[    5.103274] ata7: port disabled. ignoring.<br>[    5.256895] ehci_hcd: USB 2.0 &#39;Enhanced&#39; Host Controller (EHCI) Driver<br>

[    5.256948] ehci_hcd 0000:00:12.2: PCI INT B -&gt; GSI 17 (level, low) -&gt; IRQ 17<br>[    5.256970] ehci_hcd 0000:00:12.2: setting latency timer to 64<br>[    5.256973] ehci_hcd 0000:00:12.2: EHCI Host Controller<br>

[    5.257030] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1<br>[    5.257090] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround<br>[    5.257110] ehci_hcd 0000:00:12.2: debug port 1<br>

[    5.257129] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2409500<br>[    5.268076] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00<br>[    5.268153] usb usb1: configuration #1 chosen from 1 choice<br>[    5.268180] hub 1-0:1.0: USB hub found<br>

[    5.268188] hub 1-0:1.0: 6 ports detected<br>[    5.268369] ehci_hcd 0000:00:13.2: PCI INT B -&gt; GSI 19 (level, low) -&gt; IRQ 19<br>[    5.268382] ehci_hcd 0000:00:13.2: setting latency timer to 64<br>[    5.268385] ehci_hcd 0000:00:13.2: EHCI Host Controller<br>

[    5.268428] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2<br>[    5.268486] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround<br>[    5.268518] ehci_hcd 0000:00:13.2: debug port 1<br>

[    5.268536] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2409400<br>[    5.280077] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00<br>[    5.280136] usb usb2: configuration #1 chosen from 1 choice<br>[    5.280158] hub 2-0:1.0: USB hub found<br>

[    5.280165] hub 2-0:1.0: 6 ports detected<br>[    5.280291] ohci_hcd: USB 1.1 &#39;Open&#39; Host Controller (OHCI) Driver<br>[    5.280341] ohci_hcd 0000:00:12.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>[    5.280352] ohci_hcd 0000:00:12.0: setting latency timer to 64<br>

[    5.280356] ohci_hcd 0000:00:12.0: OHCI Host Controller<br>[    5.280395] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3<br>[    5.280457] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2408000<br>[    5.340197] usb usb3: configuration #1 chosen from 1 choice<br>

[    5.340221] hub 3-0:1.0: USB hub found<br>[    5.340230] hub 3-0:1.0: 3 ports detected<br>[    5.340343] ohci_hcd 0000:00:12.1: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>[    5.340355] ohci_hcd 0000:00:12.1: setting latency timer to 64<br>

[    5.340358] ohci_hcd 0000:00:12.1: OHCI Host Controller<br>[    5.340399] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4<br>[    5.340452] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2407000<br>[    5.396107] usb usb4: configuration #1 chosen from 1 choice<br>

[    5.396129] hub 4-0:1.0: USB hub found<br>[    5.396172] hub 4-0:1.0: 3 ports detected<br>[    5.396291] ohci_hcd 0000:00:13.0: PCI INT A -&gt; GSI 18 (level, low) -&gt; IRQ 18<br>[    5.396302] ohci_hcd 0000:00:13.0: setting latency timer to 64<br>

[    5.396306] ohci_hcd 0000:00:13.0: OHCI Host Controller<br>[    5.396348] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5<br>[    5.396406] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2406000<br>[    5.452102] usb usb5: configuration #1 chosen from 1 choice<br>

[    5.452124] hub 5-0:1.0: USB hub found<br>[    5.452167] hub 5-0:1.0: 3 ports detected<br>[    5.452287] ohci_hcd 0000:00:13.1: PCI INT A -&gt; GSI 18 (level, low) -&gt; IRQ 18<br>[    5.452299] ohci_hcd 0000:00:13.1: setting latency timer to 64<br>

[    5.452303] ohci_hcd 0000:00:13.1: OHCI Host Controller<br>[    5.452349] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6<br>[    5.452397] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2405000<br>[    5.508104] usb usb6: configuration #1 chosen from 1 choice<br>

[    5.508127] hub 6-0:1.0: USB hub found<br>[    5.508171] hub 6-0:1.0: 3 ports detected<br>[    5.508286] ohci_hcd 0000:00:14.5: PCI INT C -&gt; GSI 18 (level, low) -&gt; IRQ 18<br>[    5.508297] ohci_hcd 0000:00:14.5: setting latency timer to 64<br>

[    5.508301] ohci_hcd 0000:00:14.5: OHCI Host Controller<br>[    5.508341] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7<br>[    5.508395] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd2404000<br>[    5.564102] usb usb7: configuration #1 chosen from 1 choice<br>

[    5.564125] hub 7-0:1.0: USB hub found<br>[    5.564168] hub 7-0:1.0: 2 ports detected<br>[    5.564283] uhci_hcd: USB Universal Host Controller Interface driver<br>[    5.564365] usbcore: registered new interface driver libusual<br>

[    5.564396] usbcore: registered new interface driver usbserial<br>[    5.564406] USB Serial support registered for generic<br>[    5.580071] usb 1-4: new high speed USB device using ehci_hcd and address 2<br>[    5.962689] usb 1-4: configuration #1 chosen from 1 choice<br>

[    6.132103] usb 2-2: new high speed USB device using ehci_hcd and address 3<br>[    6.299031] usb 2-2: configuration #1 chosen from 1 choice<br>[    6.676164] usb 5-1: new low speed USB device using ohci_hcd and address 2<br>

[    6.846717] usb 5-1: configuration #1 chosen from 1 choice<br>[    7.116058] usb 6-1: new full speed USB device using ohci_hcd and address 2<br>[    7.298103] usb 6-1: configuration #1 chosen from 1 choice<br>[    7.436163] usb 7-1: new full speed USB device using ohci_hcd and address 2<br>

[    7.601070] usb 7-1: configuration #1 chosen from 1 choice<br>[    7.736164] usb 7-2: new full speed USB device using ohci_hcd and address 3<br>[    7.903052] usb 7-2: configuration #1 chosen from 1 choice<br>[    7.905252] usbcore: registered new interface driver usbserial_generic<br>

[    7.905254] usbserial: USB Serial Driver core<br>[    7.905297] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12<br>[    7.926866] serio: i8042 KBD port at 0x60,0x64 irq 1<br>[    7.926873] serio: i8042 AUX port at 0x60,0x64 irq 12<br>

[    7.928583] mice: PS/2 mouse device common for all mice<br>[    7.948616] rtc_cmos 00:05: RTC can wake from S4<br>[    7.948651] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0<br>[    7.948681] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs<br>

[    7.948753] device-mapper: uevent: version 1.0.3<br>[    7.948924] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: <a href="mailto:dm-devel@redhat.com">dm-devel@redhat.com</a><br>[    7.949289] device-mapper: multipath: version 1.0.5 loaded<br>

[    7.949292] device-mapper: multipath round-robin: version 1.0.0 loaded<br>[    7.949576] EISA: Probing bus 0 at eisa.0<br>[    7.949585] Cannot allocate resource for EISA slot 1<br>[    7.949587] Cannot allocate resource for EISA slot 2<br>

[    7.949589] Cannot allocate resource for EISA slot 3<br>[    7.949591] Cannot allocate resource for EISA slot 4<br>[    7.949593] Cannot allocate resource for EISA slot 5<br>[    7.949595] Cannot allocate resource for EISA slot 6<br>

[    7.949606] EISA: Detected 0 cards.<br>[    7.949790] cpuidle: using governor ladder<br>[    7.949792] cpuidle: using governor menu<br>[    7.950286] TCP cubic registered<br>[    7.950381] NET: Registered protocol family 10<br>

[    7.950794] lo: Disabled Privacy Extensions<br>[    7.951093] NET: Registered protocol family 17<br>[    7.951110] Bluetooth: L2CAP ver 2.11<br>[    7.951112] Bluetooth: L2CAP socket layer initialized<br>[    7.951115] Bluetooth: SCO (Voice Link) ver 0.6<br>

[    7.951117] Bluetooth: SCO socket layer initialized<br>[    7.951216] Bluetooth: RFCOMM socket layer initialized<br>[    7.951223] Bluetooth: RFCOMM TTY layer initialized<br>[    7.951225] Bluetooth: RFCOMM ver 1.10<br>

[    7.951287] powernow-k8: Found 1 AMD Turion(tm) X2 Dual-Core Mobile RM-70 processors (2 cpu cores) (version 2.20.00)<br>[    7.951367] powernow-k8:    0 : pstate 0 (2000 MHz)<br>[    7.951373] powernow-k8:    1 : pstate 1 (1000 MHz)<br>

[    7.951377] powernow-k8:    2 : pstate 2 (500 MHz)<br>[    7.952732] Using IPI No-Shortcut mode<br>[    7.952814] registered taskstats version 1<br>[    7.952971]   Magic number: 13:342:337<br>[    7.953009] tty tty58: hash matches<br>

[    7.953121] rtc_cmos 00:05: setting system clock to 2009-06-05 16:18:23 UTC (1244218703)<br>[    7.953124] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found<br>[    7.953126] EDD information not available.<br>[    7.953549] Freeing unused kernel memory: 532k freed<br>

[    7.953805] Write protecting the kernel text: 4128k<br>[    7.953897] Write protecting the kernel read-only data: 1532k<br>[    7.977402] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5<br>

[    8.224579] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded<br>[    8.224601] r8169 0000:09:00.0: PCI INT A -&gt; GSI 18 (level, low) -&gt; IRQ 18<br>[    8.224620] r8169 0000:09:00.0: setting latency timer to 64<br>[    8.224715] r8169 0000:09:00.0: irq 2299 for MSI/MSI-X<br>

[    8.225314] eth0: RTL8168c/8111c at 0xf7c78000, 00:1e:68:e6:ed:b0, XID 3c4000c0 IRQ 2299<br>[    8.291821] usbcore: registered new interface driver hiddev<br>[    8.295910] input: Microsoft Microsoft 3-Button Mouse with IntelliEye? as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input6<br>

[    8.316255] generic-usb 0003:045E:007D.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on usb-0000:00:13.0-1/input0<br>[    8.316319] usbcore: registered new interface driver usbhid<br>

[    8.316323] usbhid: v2.6:USB HID core driver<br>[    8.527085] PM: Starting manual resume from disk<br>[    8.527089] PM: Resume from partition 8:5<br>[    8.527091] PM: Checking hibernation image.<br>[    8.527279] PM: Resume from disk failed.<br>

[    8.575331] kjournald starting.  Commit interval 5 seconds<br>[    8.575344] EXT3-fs: mounted filesystem with ordered data mode.<br>[   13.920050] udev: starting version 141<br>[   14.039446] ieee80211_crypt: registered algorithm &#39;NULL&#39;<br>

[   14.044005] wl: module license &#39;&#39; taints kernel.<br>[   14.046206] wl 0000:08:00.0: PCI INT A -&gt; GSI 17 (level, low) -&gt; IRQ 17<br>[   14.046216] wl 0000:08:00.0: setting latency timer to 64<br>[   14.069406] ieee80211_crypt: registered algorithm &#39;TKIP&#39;<br>

[   14.070757] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.79.10<br>[   14.087924] acpi device:05: registered as cooling_device2<br>[   14.088294] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7<br>

[   14.098592] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0<br>[   14.098597] shpchp 0000:00:01.0: Cannot reserve MMIO region<br>[   14.098672] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4<br>

[   14.112725] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)<br>[   14.128649] Linux agpgart interface v0.103<br>[   14.140104] Bluetooth: Generic Bluetooth USB driver ver 0.3<br>[   14.140251] usbcore: registered new interface driver btusb<br>

[   14.234151] [fglrx] Maximum main memory to use for locked dma buffers: 2628 MBytes.<br>[   14.234180] [fglrx]   vendor: 1002 device: 9612 count: 1<br>[   14.234465] [fglrx] ioport: bar 1, base 0x5000, size: 0x100<br>[   14.234485] pci 0000:01:05.0: power state changed by ACPI to D0<br>

[   14.234496] pci 0000:01:05.0: PCI INT A -&gt; GSI 18 (level, low) -&gt; IRQ 18<br>[   14.234502] pci 0000:01:05.0: setting latency timer to 64<br>[   14.235174] [fglrx] Driver built-in PAT support is enabled successfully<br>

[   14.235277] [fglrx] module loaded - fglrx 8.60.40 [Mar 14 2009] with 1 minors<br>[   14.261906] input: PC Speaker as /devices/platform/pcspkr/input/input8<br>[   14.296881] input: Wacom ISDv4 93 as /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/input/input9<br>

[   14.325800] input: Wacom ISDv4 93 as /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input10<br>[   14.348695] usbcore: registered new interface driver wacom<br>[   14.348754] wacom: v1.49-pc-1:USB Wacom Graphire and Wacom Intuos tablet driver<br>

[   14.361795] Linux video capture interface: v2.00<br>[   14.362831] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0<br>[   14.405773] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a104)<br>[   14.408104] input: HP Webcam as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input11<br>

[   14.417318] usbcore: registered new interface driver uvcvideo<br>[   14.417377] USB Video Class driver (v0.1.0)<br>[   14.450678] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume<br>

[   14.613970] HDA Intel 0000:00:14.2: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>[   14.614224] HDA Intel 0000:00:14.2: setting latency timer to 64<br>[   15.006649] lp: driver loaded but no devices found<br>[   15.140880] Adding 8305564k swap on /dev/sda5.  Priority:-1 extents:1 across:8305564k<br>

[   15.475735] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04711/0xa00000<br>[   15.544619] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12<br>[   15.683929] EXT3 FS on sda1, internal journal<br>

[   16.791403] type=1505 audit(1244218712.334:2): operation=&quot;profile_load&quot; name=&quot;/usr/share/gdm/guest-session/Xsession&quot; name2=&quot;default&quot; pid=2298<br>[   16.844876] type=1505 audit(1244218712.390:3): operation=&quot;profile_load&quot; name=&quot;/sbin/dhclient-script&quot; name2=&quot;default&quot; pid=2302<br>

[   16.845024] type=1505 audit(1244218712.390:4): operation=&quot;profile_load&quot; name=&quot;/sbin/dhclient3&quot; name2=&quot;default&quot; pid=2302<br>[   16.845076] type=1505 audit(1244218712.390:5): operation=&quot;profile_load&quot; name=&quot;/usr/lib/NetworkManager/nm-dhcp-client.action&quot; name2=&quot;default&quot; pid=2302<br>

[   16.845123] type=1505 audit(1244218712.390:6): operation=&quot;profile_load&quot; name=&quot;/usr/lib/connman/scripts/dhclient-script&quot; name2=&quot;default&quot; pid=2302<br>[   16.998528] type=1505 audit(1244218712.543:7): operation=&quot;profile_load&quot; name=&quot;/usr/lib/cups/backend/cups-pdf&quot; name2=&quot;default&quot; pid=2307<br>

[   16.998733] type=1505 audit(1244218712.543:8): operation=&quot;profile_load&quot; name=&quot;/usr/sbin/cupsd&quot; name2=&quot;default&quot; pid=2307<br>[   17.030143] type=1505 audit(1244218712.575:9): operation=&quot;profile_load&quot; name=&quot;/usr/sbin/tcpdump&quot; name2=&quot;default&quot; pid=2311<br>

[   22.226575] Bluetooth: BNEP (Ethernet Emulation) ver 1.3<br>[   22.226579] Bluetooth: BNEP filters: protocol multicast<br>[   22.239170] Bridge firewalling registered<br>[   23.908544] ppdev: user-space parallel port driver<br>

[   26.114077] [fglrx] GART Table is not in FRAME_BUFFER range <br>[   26.119235] fglrx_pci 0000:01:05.0: irq 2298 for MSI/MSI-X<br>[   26.130891] [fglrx] Firegl kernel thread PID: 3395<br>[   26.141884] APIC error on CPU0: 00(08)<br>

[   26.141889] APIC error on CPU1: 00(08)<br>[   26.167126] [fglrx] Gart USWC size:1320 M.<br>[   26.167130] [fglrx] Gart cacheable size:60 M.<br>[   26.167137] [fglrx] Reserved FB block: Shared offset:0, size:1000000 <br>

[   26.167141] [fglrx] Reserved FB block: Unshared offset:13ffb000, size:5000 <br>[   27.456438] r8169: eth0: link down<br>[   27.456661] ADDRCONF(NETDEV_UP): eth0: link is not ready<br>[   32.304036] eth1: no IPv6 routers present<br>

[   47.980824] CPU0 attaching NULL sched-domain.<br>[   47.980832] CPU1 attaching NULL sched-domain.<br>[   47.981648] CPU0 attaching sched-domain:<br>[   47.981651]  domain 0: span 0-1 level CPU<br>[   47.981654]   groups: 0 1<br>

[   47.981660] CPU1 attaching sched-domain:<br>[   47.981662]  domain 0: span 0-1 level CPU<br>[   47.981664]   groups: 1 0<br> <br></div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

<div><div class="h5"><br>
--<br>
                Marco Antonio de Hoyos<br>
              15-5157-2322 // 4268-1557<br>
        Claypole - Pcia. de Bs. As.- Argentina<br>
  ICQ#92702911 / jabber: <a href="mailto:mhoyos@jabber.org">mhoyos@jabber.org</a><br>
  ----------------------------------------------------------<br>
<a href="http://tecnicoslinux.com.ar" target="_blank">http://tecnicoslinux.com.ar</a> |-| <a href="http://trekkingfotos.com.ar" target="_blank">http://trekkingfotos.com.ar</a><br>
<br>
--<br>
Ubuntu-ar lista de correo<br>
<a href="mailto:Ubuntu-ar@lists.ubuntu.com">Ubuntu-ar@lists.ubuntu.com</a><br>
Modifica tus opciones o desuscribite en: <a href="https://lists.ubuntu.com/mailman/listinfo/ubuntu-ar" target="_blank">https://lists.ubuntu.com/mailman/listinfo/ubuntu-ar</a><br>
Siempre leer, comprender y aplicar nuestra etiqueta: <a href="https://wiki.ubuntu.com/ArgentinaTeam/EtiquetaML" target="_blank">https://wiki.ubuntu.com/ArgentinaTeam/EtiquetaML</a><br>
<br>
</div></div></blockquote></div><br>