[ubuntu/maverick] system-config-printer 1.2.3+20100713-0ubuntu1 (Accepted)

[Till Kamppeter]

system-config-printer (1.2.3+20100713-0ubuntu1) maverick; urgency=low

  * New upstream release
     o GIT 1.2.x snapshot from 13 July 2010
     o Version 1.2.3 plus some additional fixes and translations
     o Plug'n'Print also for Bluetooth printers now.
     o Do not automatically set up a print queue if a driver executable is
       missing.
     o Improvements on device ID handling: Discovery via SNMP, non-UTF-8
       environments, ignore the deprecated hal backend.
     o Avoid Yes/No buttons (Upstream bug #204).
     o Re-introduced and added keyboard accelerators for system-config-printer
       itself and for the job viewer.
     o New HIG-compliant job viewer UI. Thanks to Sergey Nizovtsev for the
       patch (LP: #555213, upstream bug #205).
     o Attempt to translate backend device-info strings and other fixes
       on the translation mechanism (LP: #557199).
     o Fixed markup in error pop-ups (LP: #567324).
     o Made width of "Verify" button in New Printer Wizard adapt to the length
       of the actual translation of "Verify" (LP: #575048).
     o Make Kyocera detected if it reports only the model name (Upstreamized
       LP: #564633).
     o Removed doubled-up 'translatable' attribute in UI file (LP: #571662).
     o Handle IPP failure fetching printer attrs for completed jobs
       (LP: #561082).
     o Many more bug fixes and UI improvements.
     o Translation updates.
  * debian/patches/57_backend-integration-dnssd-bluetooth.patch,
    debian/patches/67_udev_configure_printer_match_usblp_libusb_and_hplip_uris.patch,
    debian/patches/75_use-dnssd-uris-for-hplip.patch,
    debian/patches/94_cache-and-timeout-for-avahi-browse.patch
    debian/patches/96_new-printer-setup-check-for-local-drivers-first.patch:
    Regenerated to work with new upstream code.
  * debian/patches/97_add-missing-make-name-kyocera-mita.patch: Removed
    patches for upstream fixes.
  * debian/patches/57_backend-integration-dnssd-bluetooth.patch: To check for
    HP fax devices do not do an exact match of "Fax" with the model name but
    check whether the model name begins with "Fax".
  * debian/patches/44_no-runtime-error-on-missing-firewall.patch: Let the
    firewall functions exit silently if there is no firewall service on the
    D-Bus.
  * debian/patches/50_give-priority-to-hpcups.patch: Prioritize hpcups against
    HPIJS again. It should have matured enough now.
  * debian/system-config-printer-common.install: Added new dnssdresolve.py
    file.
  * debian/rules: Added directory settings for UDEV rules and scripts to the
    "make install" command line.
  * debian/control: Added libglib2.0-dev as build dependency, needed for the
    Bluetooth Plug'n'Print support.

Date: Tue, 13 Jul 2010 13:21:33 +0200
Changed-By: Till Kamppeter <till.kamppeter at gmail.com>
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/maverick/+source/system-config-printer/1.2.3+20100713-0ubuntu1
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Tue, 13 Jul 2010 13:21:33 +0200
Source: system-config-printer
Binary: system-config-printer-common system-config-printer-udev hal-cups-utils system-config-printer-gnome python-cupshelpers
Architecture: source
Version: 1.2.3+20100713-0ubuntu1
Distribution: maverick
Urgency: low
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Till Kamppeter <till.kamppeter at gmail.com>
Description: 
 hal-cups-utils - CUPS integration with HAL
 python-cupshelpers - Python modules for printer configuration with CUPS
 system-config-printer-common - Printer configuration GUI
 system-config-printer-gnome - Printer configuration GUI
 system-config-printer-udev - Printer auto-configuration facility based on udev
Launchpad-Bugs-Fixed: 555213 557199 561082 564633 567324 571662 575048
Changes: 
 system-config-printer (1.2.3+20100713-0ubuntu1) maverick; urgency=low
 .
   * New upstream release
      o GIT 1.2.x snapshot from 13 July 2010
      o Version 1.2.3 plus some additional fixes and translations
      o Plug'n'Print also for Bluetooth printers now.
      o Do not automatically set up a print queue if a driver executable is
        missing.
      o Improvements on device ID handling: Discovery via SNMP, non-UTF-8
        environments, ignore the deprecated hal backend.
      o Avoid Yes/No buttons (Upstream bug #204).
      o Re-introduced and added keyboard accelerators for system-config-printer
        itself and for the job viewer.
      o New HIG-compliant job viewer UI. Thanks to Sergey Nizovtsev for the
        patch (LP: #555213, upstream bug #205).
      o Attempt to translate backend device-info strings and other fixes
        on the translation mechanism (LP: #557199).
      o Fixed markup in error pop-ups (LP: #567324).
      o Made width of "Verify" button in New Printer Wizard adapt to the length
        of the actual translation of "Verify" (LP: #575048).
      o Make Kyocera detected if it reports only the model name (Upstreamized
        LP: #564633).
      o Removed doubled-up 'translatable' attribute in UI file (LP: #571662).
      o Handle IPP failure fetching printer attrs for completed jobs
        (LP: #561082).
      o Many more bug fixes and UI improvements.
      o Translation updates.
   * debian/patches/57_backend-integration-dnssd-bluetooth.patch,
     debian/patches/67_udev_configure_printer_match_usblp_libusb_and_hplip_uris.patch,
     debian/patches/75_use-dnssd-uris-for-hplip.patch,
     debian/patches/94_cache-and-timeout-for-avahi-browse.patch
     debian/patches/96_new-printer-setup-check-for-local-drivers-first.patch:
     Regenerated to work with new upstream code.
   * debian/patches/97_add-missing-make-name-kyocera-mita.patch: Removed
     patches for upstream fixes.
   * debian/patches/57_backend-integration-dnssd-bluetooth.patch: To check for
     HP fax devices do not do an exact match of "Fax" with the model name but
     check whether the model name begins with "Fax".
   * debian/patches/44_no-runtime-error-on-missing-firewall.patch: Let the
     firewall functions exit silently if there is no firewall service on the
     D-Bus.
   * debian/patches/50_give-priority-to-hpcups.patch: Prioritize hpcups against
     HPIJS again. It should have matured enough now.
   * debian/system-config-printer-common.install: Added new dnssdresolve.py
     file.
   * debian/rules: Added directory settings for UDEV rules and scripts to the
     "make install" command line.
   * debian/control: Added libglib2.0-dev as build dependency, needed for the
     Bluetooth Plug'n'Print support.
Checksums-Sha1: 
 62f5b4d87bcb9866849eef68f3faeca619596601 1539 system-config-printer_1.2.3+20100713-0ubuntu1.dsc
 7770a1b8ce03e8c46071c858c644b20cea2763a5 1943325 system-config-printer_1.2.3+20100713.orig.tar.gz
 10e811840d02a69ea6b84238069550c75f58258a 143652 system-config-printer_1.2.3+20100713-0ubuntu1.diff.gz
Checksums-Sha256: 
 483e89e504ef8c895c958f6845d76aadc2a672794e08b509a3ccec7f38f63423 1539 system-config-printer_1.2.3+20100713-0ubuntu1.dsc
 2dd4cbea4232e15a74693b708e850dda711c8ffc91c7f4dd5a9131953a32edc0 1943325 system-config-printer_1.2.3+20100713.orig.tar.gz
 20b893d95d10b2ba220284adfea09ce785e0708c0050975e6949b018741287ba 143652 system-config-printer_1.2.3+20100713-0ubuntu1.diff.gz
Files: 
 b52d36161ddbfe6aa4d09c7bf1c1d2c5 1539 python optional system-config-printer_1.2.3+20100713-0ubuntu1.dsc
 27312eaf33175f142b11dea70fafc8ac 1943325 python optional system-config-printer_1.2.3+20100713.orig.tar.gz
 9411fa81a5668d47bf430199d2e01056 143652 python optional system-config-printer_1.2.3+20100713-0ubuntu1.diff.gz
Original-Maintainer: Otavio Salvador <otavio at ossystems.com.br>

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iEYEARECAAYFAkw82QAACgkQTuVatl/cKEkKpgCgwrG6Ef0Kt25P9QKe9xnUS5UA
43oAoKPPdcKJT/2D0oVP6V6M1W5cZyBK
=2omr
-----END PGP SIGNATURE-----