K3B problem in Lucid Lynx
Wulfy
wulfmann at tiscali.co.uk
Thu May 13 05:33:36 UTC 2010
Since I've upgraded to Lucid, I haven't been able to burn a DVD. I get
an error from cdrecord (error 254, which is, apparently, 'unknown').
I've googled but can't find anything that helps. Despite what the report
below says about bytes written, no data is written to the disk.
Has anyone had a similar problem? Any ideas on how to fix it???
Debugger output:
Devices
-----------------------
PIONEER DVD-RW DVR-111D 1.23 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM,
DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R
Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RW
Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual
Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16,
RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
K3b::IsoImager
-----------------------
mkisofs print size result: 1792448 (3670933504 bytes)
System
-----------------------
K3b Version: 1.91.0
KDE Version: 4.4.2 (KDE 4.4.2)
QT Version: 4.6.2
Kernel: 2.6.32-22-generic
Used versions
-----------------------
mkisofs: 1.1.10
cdrecord: 1.1.10
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identification : 'DVD-RW DVR-111D'
Revision : '1.23'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size : 12582912 = 12288 KB
Speed set to 8310 KB/s
Track 01: data 3500 MB
Total size: 4020 MB (398:19.30) = 1792448 sectors
Lout start: 4020 MB (398:21/23) = 1792448 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 506048
Starting to write CD/DVD at speed 6.0 in real force SAO mode for multi
session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 3500 MB written.
Track 01: 1 of 3500 MB written (fifo 93%) [buf 67%] 22.4x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 02 0F 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 FF FF 03 E0 0E 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk -64544 (not valid)
cmd finished after 0.001s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 1079296 bytes
Writing time: 61.641s
Average write speed 76.0x.
Fixating...
Fixating time: 0.018s
/usr/bin/wodim: fifo had 209 puts and 18 gets.
/usr/bin/wodim: fifo was 0 times empty and 1 times full, min fill was 93%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=6 -sao
driveropts=burnfree -force -multi -ignsize -data -tsize=1792448s -
mkisofs
-----------------------
1792448
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.03% done, estimate finish Thu May 13 06:25:43 2010
0.06% done, estimate finish Thu May 13 06:25:43 2010
0.08% done, estimate finish Thu May 13 06:25:43 2010
0.11% done, estimate finish Thu May 13 06:25:43 2010
0.14% done, estimate finish Thu May 13 06:25:43 2010
0.17% done, estimate finish Thu May 13 06:35:39 2010
0.20% done, estimate finish Thu May 13 06:34:14 2010
0.22% done, estimate finish Thu May 13 06:33:09 2010
0.25% done, estimate finish Thu May 13 06:32:20 2010
0.28% done, estimate finish Thu May 13 06:31:40 2010
0.31% done, estimate finish Thu May 13 06:31:08 2010
0.34% done, estimate finish Thu May 13 06:30:40 2010
0.36% done, estimate finish Thu May 13 08:38:46 2010
mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid LHotP
3b -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND
MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1
-volset-seqno 1 -sort /tmp/kde-wulfy/k3bN20111.tmp -rational-rock
-hide-list /tmp/kde-wulfy/k3bU20111.tmp -joliet -joliet-long
-hide-joliet-list /tmp/kde-wulfy/k3bs20111.tmp -no-cache-inodes
-full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-wulfy/k3br20111.tmp
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid LHotP 3b -volset -appid
K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK
-publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
/tmp/kde-wulfy/k3by20111.tmp -rational-rock -hide-list
/tmp/kde-wulfy/k3bR20111.tmp -joliet -joliet-long -hide-joliet-list
/tmp/kde-wulfy/k3bg20111.tmp -no-cache-inodes -full-iso9660-filenames
-iso-level 3 -path-list /tmp/kde-wulfy/k3bj20111.tmp
--
Blessings
Wulfmann
Wulf Credo:
Respect the elders. Teach the young. Co-operate with the pack.
Play when you can. Hunt when you must. Rest in between.
Share your affections. Voice your opinion. Leave your Mark.
Copyright July 17, 1988 by Del Goetz
More information about the kubuntu-users
mailing list