kubuntu-users Digest, Vol 52, Issue 167

Charles T. Bell cbell44 at cfl.rr.com
Mon Jun 1 07:30:48 UTC 2009


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


On 05/30/2009 kubuntu-users-request at lists.ubuntu.com wrote:
> From: David McGlone <david at dmcentral.net>
> Subject: Re: Attempting to move from kde 4.2.2 to 4.2.3
> To: Kubuntu Help and User Discussions <kubuntu-users at lists.ubuntu.com>
> Message-ID: <200905292321.15311.david at dmcentral.net>
> Content-Type: Text/Plain;  charset="iso-8859-1"
>
> On Friday 29 May 2009 10:57:04 pm Steven Vollom wrote:
>> > (Trim)
>> >
>>> > > Cool!  :-)  So far so good. Is your hardware working now?
>>> > > --
>> >
>> > I had to leave the memory and video card out for the installation.  Both
>> > caused the video to not work.  I used 2 sticks of memory and the onboard
>> > video to get a screen.  Every other configuration caused a black screen.
>
> Ok, If I were you, I would choose one or the other and try getting them to
> work 1 at a time. I'd go for the memory first. Try putting just the
memory back
> in the machine and make sure it is absolutely seated in the slot all
the way,
> and see if that may have been your problem.
>
> If that doesn't work, and the computer will not boot, then just take it
back
> out, if the computer does boot, check in the BIOS to see if the BIOS is
> recognizing it before you boot into Kubuntu This will answer the question
> whether the system recognizes the memory, but the Operating system
doesn't.
>
> There are basically just 3 problems that can happen with memory.
>
> 1. it's the wrong type of memory.
> 2. the memory isn't seated correctly
> 3. bad memory module
>
> we can rule out #1 because from what I understand, this was in your system
> before and worked fine.
>
> --
> Blessings
> David M.
I have an ASUS MB and the previous version of the same make/model
board had a major malfunction.  When I put memory in A1/B1, it worked
fine, but when I put memory in A1/A2/B1/B2 or A1/A2/B2 or A1/A2 it
would only boot to a blank screen.  I hope this is not the case, or
you will
be stuck with the problem of having to avoid using the particular memory
slot that is causing the malfunction.  I also tried mixing and matching
the memory boards between the slots, same results.  The same memory
boards are working fine in my current MB, AMD64 with 8GB.

Tom Bell

Quis custodiet ipsos custodes?  -- Decimus Iunius Iuvenalis (Juvenal),
Roman Poet, late 1st, early 2nd century AD
("Who will protect us from the protectors?")

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAkojg54ACgkQeCZq8CwdDmgLJACdHcYQsNCQeFyZJ6KbL/OcDGJ9
zPYAoK6YVJ/LHO+Ml6J38QhKgPhR4siz
=mhaA
-----END PGP SIGNATURE-----





More information about the kubuntu-users mailing list