Beryl on Feisty Fawn
Sundar
sundar261 at gmail.com
Sat Apr 28 03:07:57 UTC 2007
Thanks Jiri. Changing the depth to 24 resolved my issues. Now I am
able to use beryl without any issues :-)
-Sundar
On Fri, 2007-04-27 at 19:55 +0200, Jiri Dvorak wrote:
> Hi,
>
> did you check /var/log/Xorg.0.log for errors?
> I had a similar setup, and in the log it said it needs DefaultDepth 24 for
> AddARGBGLXVisuals to load. I changed the DefaultDepth and from then
> Compiz and Beryl started to work. Maybe your situation is different, but
> the logfile is a good place to start troubleshooting...
>
> Jiri
>
>
> On 4/27/07, Michael W. Holdeman <lists at ptfd.org> wrote:
> >
> > I have the same problem, and have made the correct (i think) adjustments to my
> > xorg.conf file here..
> >
> > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++]
> > # nvidia-xconfig: X configuration file generated by nvidia-xconfig
> > # nvidia-xconfig: version 1.0 (buildmeister at builder3) Thu Nov 9 17:55:20
> > PST 2006
> >
> > # /etc/X11/xorg.conf (xorg X Window System server configuration file)
> > #
> > # This file was generated by dexconf, the Debian X Configuration tool, using
> > # values from the debconf database.
> > #
> > # Edit this file with caution, and see the xorg.conf(5) manual page.
> > # (Type "man xorg.conf" at the shell prompt.)
> > #
> > # This file is automatically updated on xserver-xorg package upgrades *only*
> > # if it has not been modified since the last upgrade of the xserver-xorg
> > # package.
> > #
> > # If you have edited this file but would like it to be automatically updated
> > # again, run the following command:
> > # sudo dpkg-reconfigure -phigh xserver-xorg
> >
> > Section "ServerLayout"
> > Identifier "Default Layout"
> > Screen "Default Screen" 0 0
> > InputDevice "Generic Keyboard"
> > InputDevice "Configured Mouse"
> > InputDevice "stylus" "SendCoreEvents"
> > InputDevice "cursor" "SendCoreEvents"
> > InputDevice "eraser" "SendCoreEvents"
> > InputDevice "Synaptics Touchpad"
> > EndSection
> >
> > Section "Files"
> >
> > # path to defoma fonts
> > FontPath "/usr/share/fonts/X11/misc"
> > FontPath "/usr/share/fonts/X11/cyrillic"
> > FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
> > FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
> > FontPath "/usr/share/fonts/X11/Type1"
> > FontPath "/usr/share/fonts/X11/100dpi"
> > FontPath "/usr/share/fonts/X11/75dpi"
> > FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> > EndSection
> >
> > Section "Module"
> > Load "i2c"
> > Load "bitmap"
> > Load "ddc"
> > Load "extmod"
> > Load "freetype"
> > Load "glx"
> > Load "int10"
> > Load "vbe"
> > Load "dri"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Generic Keyboard"
> > Driver "kbd"
> > Option "CoreKeyboard"
> > Option "XkbRules" "xorg"
> > Option "XkbModel" "pc105"
> > Option "XkbLayout" "us"
> > Option "XkbOptions" "lv3:ralt_switch"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Configured Mouse"
> > Driver "mouse"
> > Option "CorePointer"
> > Option "Device" "/dev/input/mice"
> > Option "Protocol" "ImPS/2"
> > Option "ZAxisMapping" "4 5"
> > Option "Emulate3Buttons" "true"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Synaptics Touchpad"
> > Driver "synaptics"
> > Option "SendCoreEvents" "true"
> > Option "Device" "/dev/psaux"
> > Option "Protocol" "auto-dev"
> > Option "HorizScrollDelta" "0"
> > EndSection
> >
> > Section "InputDevice"
> >
> > # /dev/input/event
> > # for USB
> > Identifier "stylus"
> > Driver "wacom"
> > Option "Device" "/dev/wacom" # Change to
> > Option "Type" "stylus"
> > Option "ForceDevice" "ISDV4" # Tablet PC ONLY
> > EndSection
> >
> > Section "InputDevice"
> >
> > # /dev/input/event
> > # for USB
> > Identifier "eraser"
> > Driver "wacom"
> > Option "Device" "/dev/wacom" # Change to
> > Option "Type" "eraser"
> > Option "ForceDevice" "ISDV4" # Tablet PC ONLY
> > EndSection
> >
> > Section "InputDevice"
> >
> > # /dev/input/event
> > # for USB
> > Identifier "cursor"
> > Driver "wacom"
> > Option "Device" "/dev/wacom" # Change to
> > Option "Type" "cursor"
> > Option "ForceDevice" "ISDV4" # Tablet PC ONLY
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Generic Monitor"
> > HorizSync 28.0 - 84.0
> > VertRefresh 43.0 - 60.0
> > Option "DPMS"
> > EndSection
> >
> > Section "Device"
> > Identifier "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
> > Driver "nvidia"
> > Option "AllowGLXWithComposite" "True"
> > Option "RenderAccel" "True"
> > Option "AddARGBGLXVisuals" "True"
> > EndSection
> >
> > Section "Screen"
> > Identifier "Default Screen"
> > Device "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
> > Monitor "Generic Monitor"
> > DefaultDepth 16
> >
> > SubSection "Display"
> > Depth 1
> > Modes "1680x1050"
> > EndSubSection
> > SubSection "Display"
> > Depth 4
> > Modes "1680x1050"
> > EndSubSection
> > SubSection "Display"
> > Depth 8
> > Modes "1680x1050"
> > EndSubSection
> > SubSection "Display"
> > Depth 15
> > Modes "1680x1050"
> > EndSubSection
> > SubSection "Display"
> > Depth 16
> > Modes "1680x1050"
> > EndSubSection
> > SubSection "Display"
> > Depth 24
> > Modes "1680x1050"
> > EndSubSection
> > EndSection
> >
> > Section "Extensions"
> > Option "Composite" "Enable"
> > EndSection
> >
> > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >
> > Any other ideas?
> > On Friday 27 April 2007 12:42:54 am Andrew Jarrett wrote:
> > > Sundar,
> > >
> > > This is a fairly common problem, especially with Nvidia users. However, the
> > > answer you are looking for is to add this line to your /etc/X11/xorg.conf:
> > > Option "AddARGBGLXVisuals" "True"
> > >
> > > Put this line in the section labeled "Device", save, and then restart the
> > > xserver (CTRL + ALT + BACKSPACE).
> > >
> > > Andrew
> > >
> > > On 4/26/07, Sundar <sundar261 at gmail.com> wrote:
> > > > Hi,
> > > >
> > > > I am having configuring Beryl on Feisty Fawn. Everything seems to be
> > > > working ok with beryl execpt for windows decorations. The themes do not
> > > > seem to be getting applied to the window decorations and also the close,
> > > > minimize and maximize buttons are missing on the window. The problem
> > > > exists when I choose beryl / compiz window manager.
> > > >
> > > > I also found from Beryl forums that others have faced with the same
> > > > problem (http://forum.beryl-project.org/viewtopic.php?f=36&t=5947) but
> > > > no solution to the problem.
> > > >
> > > > I use NVIDIA Go 7300 graphics card. Is the problem due to some beryl
> > > > settings or is it a problem with the nvdia driver? Any pointers are
> > > > welcome.
> > > >
> > > > -Sundar
> > > >
> > > >
> > > > --
> > > > kubuntu-users mailing list
> > > > kubuntu-users at lists.ubuntu.com
> > > > Modify settings or unsubscribe at:
> > > > https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
> >
> > --
> > kubuntu-users mailing list
> > kubuntu-users at lists.ubuntu.com
> > Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
> >
>
More information about the kubuntu-users
mailing list