Beryl on Feisty Fawn
Michael W. Holdeman
lists at ptfd.org
Fri Apr 27 18:46:58 UTC 2007
Thanks,
Found that just after I sent the other message, changed it to 24 and
restarted. But I still can't get it. the assARGBGLXVisuals don't show an
error but I can't see in the log where they load either. Here is the pertinet
section:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "AllowGLXWithComposite" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU Quadro NVS 110M at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.72.22.21.fe
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on Quadro NVS 110M at PCI:1:0:0:
(--) NVIDIA(0): Seiko (DFP-0)
(--) NVIDIA(0): Seiko (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): Seiko (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1680x1050"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (129, 126); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
any more ideas?
When I just click on beryl-manager in kde I get the icon in teh bottom left
but a message comes up and says the composite manager crashed twice.
When I try beryl-manager in a konsole it is the same.
When I try beryl only in konsole I get the konsole window without any
decorations, and can't enter any text, the konsole seems inactive.
The beryl then works somewhat but doesn't really work right. Not usable.
Mike
On Friday 27 April 2007 01:55:22 pm Jiri Dvorak wrote:
> Hi,
>
> did you check /var/log/Xorg.0.log for errors?
> I had a similar setup, and in the log it said it needs DefaultDepth 24 for
> AddARGBGLXVisuals to load. I changed the DefaultDepth and from then
> Compiz and Beryl started to work. Maybe your situation is different, but
> the logfile is a good place to start troubleshooting...
>
> Jiri
>
> On 4/27/07, Michael W. Holdeman <lists at ptfd.org> wrote:
> > I have the same problem, and have made the correct (i think) adjustments
> > to my xorg.conf file here..
> >
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >+++++] # nvidia-xconfig: X configuration file generated by nvidia-xconfig
> > # nvidia-xconfig: version 1.0 (buildmeister at builder3) Thu Nov 9
> > 17:55:20 PST 2006
> >
> > # /etc/X11/xorg.conf (xorg X Window System server configuration file)
> > #
> > # This file was generated by dexconf, the Debian X Configuration tool,
> > using # values from the debconf database.
> > #
> > # Edit this file with caution, and see the xorg.conf(5) manual page.
> > # (Type "man xorg.conf" at the shell prompt.)
> > #
> > # This file is automatically updated on xserver-xorg package upgrades
> > *only* # if it has not been modified since the last upgrade of the
> > xserver-xorg # package.
> > #
> > # If you have edited this file but would like it to be automatically
> > updated # again, run the following command:
> > # sudo dpkg-reconfigure -phigh xserver-xorg
> >
> > Section "ServerLayout"
> > Identifier "Default Layout"
> > Screen "Default Screen" 0 0
> > InputDevice "Generic Keyboard"
> > InputDevice "Configured Mouse"
> > InputDevice "stylus" "SendCoreEvents"
> > InputDevice "cursor" "SendCoreEvents"
> > InputDevice "eraser" "SendCoreEvents"
> > InputDevice "Synaptics Touchpad"
> > EndSection
> >
> > Section "Files"
> >
> > # path to defoma fonts
> > FontPath "/usr/share/fonts/X11/misc"
> > FontPath "/usr/share/fonts/X11/cyrillic"
> > FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
> > FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
> > FontPath "/usr/share/fonts/X11/Type1"
> > FontPath "/usr/share/fonts/X11/100dpi"
> > FontPath "/usr/share/fonts/X11/75dpi"
> > FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> > EndSection
> >
> > Section "Module"
> > Load "i2c"
> > Load "bitmap"
> > Load "ddc"
> > Load "extmod"
> > Load "freetype"
> > Load "glx"
> > Load "int10"
> > Load "vbe"
> > Load "dri"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Generic Keyboard"
> > Driver "kbd"
> > Option "CoreKeyboard"
> > Option "XkbRules" "xorg"
> > Option "XkbModel" "pc105"
> > Option "XkbLayout" "us"
> > Option "XkbOptions" "lv3:ralt_switch"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Configured Mouse"
> > Driver "mouse"
> > Option "CorePointer"
> > Option "Device" "/dev/input/mice"
> > Option "Protocol" "ImPS/2"
> > Option "ZAxisMapping" "4 5"
> > Option "Emulate3Buttons" "true"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Synaptics Touchpad"
> > Driver "synaptics"
> > Option "SendCoreEvents" "true"
> > Option "Device" "/dev/psaux"
> > Option "Protocol" "auto-dev"
> > Option "HorizScrollDelta" "0"
> > EndSection
> >
> > Section "InputDevice"
> >
> > #
> > /dev/input/event # for USB Identifier "stylus"
> > Driver "wacom"
> > Option "Device" "/dev/wacom" # Change to
> > Option "Type" "stylus"
> > Option "ForceDevice" "ISDV4" # Tablet PC ONLY
> > EndSection
> >
> > Section "InputDevice"
> >
> > #
> > /dev/input/event # for USB Identifier "eraser"
> > Driver "wacom"
> > Option "Device" "/dev/wacom" # Change to
> > Option "Type" "eraser"
> > Option "ForceDevice" "ISDV4" # Tablet PC ONLY
> > EndSection
> >
> > Section "InputDevice"
> >
> > #
> > /dev/input/event # for USB Identifier "cursor"
> > Driver "wacom"
> > Option "Device" "/dev/wacom" # Change to
> > Option "Type" "cursor"
> > Option "ForceDevice" "ISDV4" # Tablet PC ONLY
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Generic Monitor"
> > HorizSync 28.0 - 84.0
> > VertRefresh 43.0 - 60.0
> > Option "DPMS"
> > EndSection
> >
> > Section "Device"
> > Identifier "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go
> > 7300]" Driver "nvidia"
> > Option "AllowGLXWithComposite" "True"
> > Option "RenderAccel" "True"
> > Option "AddARGBGLXVisuals" "True"
> > EndSection
> >
> > Section "Screen"
> > Identifier "Default Screen"
> > Device "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go
> > 7300]" Monitor "Generic Monitor"
> > DefaultDepth 16
> >
> > SubSection "Display"
> > Depth 1
> > Modes "1680x1050"
> > EndSubSection
> > SubSection "Display"
> > Depth 4
> > Modes "1680x1050"
> > EndSubSection
> > SubSection "Display"
> > Depth 8
> > Modes "1680x1050"
> > EndSubSection
> > SubSection "Display"
> > Depth 15
> > Modes "1680x1050"
> > EndSubSection
> > SubSection "Display"
> > Depth 16
> > Modes "1680x1050"
> > EndSubSection
> > SubSection "Display"
> > Depth 24
> > Modes "1680x1050"
> > EndSubSection
> > EndSection
> >
> > Section "Extensions"
> > Option "Composite" "Enable"
> > EndSection
> >
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >+++++
> >
> > Any other ideas?
> >
> > On Friday 27 April 2007 12:42:54 am Andrew Jarrett wrote:
> > > Sundar,
> > >
> > > This is a fairly common problem, especially with Nvidia users. However,
> > > the answer you are looking for is to add this line to your
> > > /etc/X11/xorg.conf: Option "AddARGBGLXVisuals" "True"
> > >
> > > Put this line in the section labeled "Device", save, and then restart
> > > the xserver (CTRL + ALT + BACKSPACE).
> > >
> > > Andrew
> > >
> > > On 4/26/07, Sundar <sundar261 at gmail.com> wrote:
> > > > Hi,
> > > >
> > > > I am having configuring Beryl on Feisty Fawn. Everything seems to be
> > > > working ok with beryl execpt for windows decorations. The themes do
> > > > not seem to be getting applied to the window decorations and also the
> > > > close, minimize and maximize buttons are missing on the window. The
> > > > problem exists when I choose beryl / compiz window manager.
> > > >
> > > > I also found from Beryl forums that others have faced with the same
> > > > problem (http://forum.beryl-project.org/viewtopic.php?f=36&t=5947)
> > > > but no solution to the problem.
> > > >
> > > > I use NVIDIA Go 7300 graphics card. Is the problem due to some beryl
> > > > settings or is it a problem with the nvdia driver? Any pointers are
> > > > welcome.
> > > >
> > > > -Sundar
> > > >
> > > >
> > > > --
> > > > kubuntu-users mailing list
> > > > kubuntu-users at lists.ubuntu.com
> > > > Modify settings or unsubscribe at:
> > > > https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
> >
> > --
> > kubuntu-users mailing list
> > kubuntu-users at lists.ubuntu.com
> > Modify settings or unsubscribe at:
> > https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
More information about the kubuntu-users
mailing list