Re: Can´t turn off power-saving?

Andrew Jarrett jarrett.andrew at gmail.com
Wed Apr 11 02:26:02 UTC 2007


I have looked into the problem a little further and it seems that "power
saving" is called DPMS.  In your xorg.conf file under the monitor section,
there is an option that says "Option "DPMS"".  I suggest creating a *backup*
of your working xorg.conf and then comment (use #) or delete all the lines
out that say anything about DPMS.  Then add the following lines under the
*ServerFlags* section:

Section "ServerFlags"
     Option "blank time" "0"
     Option "standby time" "0"
     Option "suspend time" "0"
     Option "off time" "0"
EndSection

Hope this helps!  If it doesn't, you may want to try to play around with any
power management settings in the BIOS.

Andrew Jarrett


On 4/9/07, anthony baldwin <anthony.baldwin01 at comcast.net> wrote:
>
> Andrew Jarrett wrote:
>
> > It looks like you are using the open source driver for your ATI Radeon
> > Xpress 200 (I am assuming that the video card has been correctly
> > identified).  You might want to try installing the proprietary ati
> > driver (called fglrx) - here is an in-depth walk-through:
> > http://wiki.cchtml.com/index.php/Ubuntu_Edgy_Installation_Guide.
>
>
> > It looks like you have an Acer x171 LCD monitor - is this correct?
>
>
> That is correct.
>
> > Are your vertical and horizontal refresh rates set correctly?  Check
> > the manual that came with the monitor if you aren't sure what these
> > should be set to.  I hope I am not leading you down the wrong path -
> > anyone with a little more expertise should feel free to jump in.
>
>
> It seems to be autodetecting everything fine, and everything looks
> great, until I turn off powersaving and restart x.
> If I leave powersaving on, I have no problem.
>
> thanks
> tony
>
> >
> > Andrew Jarrett
> >
> > On 4/9/07, *anthony baldwin* <anthony.baldwin01 at comcast.net
> > <mailto:anthony.baldwin01 at comcast.net>> wrote:
> >
> >     Andrew Jarrett wrote:
> >
> >     > Anthony, could you attach your xorg.conf file (located in
> >     /etc/X11/)?
> >     > Even though it sounds like this is either a problem with your
> >     monitor
> >     > or with the power-saving feature it might be affected by the video
> >     > card driver you are using.  Are you sure your video card is being
> >     > correctly detected?  You might need to download the proprietary
> >     > drivers from ATI or Nvidia if you are using one of the open source
> >     > drivers.  I think that some monitors have options for
> >     power-saving in
> >     > the built-in OSD - you might want to check it.  I'm no expert, but
> I
> >     > am certainly glad to help.
> >     >
> >     > Andrew Jarrett
> >
> >
> >     Thanks again , Andrew,
> >
> >     Here are the screen/monitor/display portions of my xorg.cong:
> >
> >     Section "Device"
> >         Identifier    "ATI Technologies, Inc. Radeon Xpress 200 (RC410)"
> >         Driver        "ati"
> >         BusID        "PCI:1:5:0"
> >         Option        "UseFBDev"        "true"
> >     EndSection
> >
> >     Section "Monitor"
> >         Identifier    "X171"
> >         Option        "DPMS"
> >         HorizSync    30-65
> >         VertRefresh    50-75
> >     EndSection
> >
> >     Section "Screen"
> >         Identifier    "Default Screen"
> >         Device        "ATI Technologies, Inc. Radeon Xpress 200 (RC410)"
> >         Monitor        "X171"
> >         DefaultDepth    24
> >
> >             Depth        24
> >             Modes        "1280x1024" "1280x800" "1152x864" "1024x768"
> >     "800x600" "640x480"
> >         EndSubSection
> >     EndSection
> >
> >     Section "ServerLayout"
> >         Identifier    "Default Layout"
> >         Screen        "Default Screen"
> >         InputDevice    "Generic Keyboard"
> >         InputDevice    "Configured Mouse"
> >         InputDevice     "stylus" "SendCoreEvents"
> >         InputDevice     "cursor" "SendCoreEvents"
> >         InputDevice     "eraser" "SendCoreEvents"
> >     EndSection
> >
> >     Section "DRI"
> >         Mode    0666
> >     EndSection
> >
> >
> >     thanks,
> >     tony
> >
> >     >
> >     > On 4/8/07, *anthony baldwin* <anthony.baldwin01 at comcast.net
> >     <mailto:anthony.baldwin01 at comcast.net>
> >     > <mailto: anthony.baldwin01 at comcast.net
> >     <mailto:anthony.baldwin01 at comcast.net>>> wrote:
> >     >
> >     >     Hi,
> >     >
> >     >     I don´t want ¨power saving¨ on, because I want my
> >     screensaver to be
> >     >     displayed.
> >     >     But every time I turn off power saving and ¨restart
> >     xserver¨, it comes
> >     >     back at 640x480 or whatever, resolution,
> >     >     and won´ allow me to reset the resolution.  At that point,
> >     it only
> >     >     offers 640x480 or 1600x1200 (which is outside my monitor´s
> >     >     range.  Ideal for this monitor is 1280x1024).
> >     >     Then, I dpkg-reconfigure xserver-xorg, and get my resolution
> >     back, but
> >     >     the d@#ned power saving comes back on, too.
> >     >
> >     >     Any assistance appreciated, as always...
> >     >
> >     >     tony
> >     >
> >     >     --
> >     >     http://www.baldwinlinguas.com
> >     >     http://www.photodharma.com
> >     >     --------BEGIN GEEK CODE--------
> >     >     Version: 3.1
> >     >     GED/FA/H/L$ d-- s-:-- a C++ L+++ W++ w--- M PS++ PE-- PGP+
> >     t+ tv--
> >     >     b++++ G e++++ h---- r++++ y++++
> >     >     --------END GEEK CODE----------
> >     >
> >     >
> >     >     --
> >     >     kubuntu-users mailing list
> >     >     kubuntu-users at lists.ubuntu.com
> >     <mailto:kubuntu-users at lists.ubuntu.com>
> >     <mailto:kubuntu-users at lists.ubuntu.com
> >     <mailto:kubuntu-users at lists.ubuntu.com>>
> >     >     Modify settings or unsubscribe at:
> >     >     https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
> >     >
> >     >
> >
> >
> >     --
> >     http://www.baldwinlinguas.com
> >     http://www.photodharma.com
> >     --------BEGIN GEEK CODE--------
> >     Version: 3.1
> >     GED/FA/H/L$ d-- s-:-- a C++ L+++ W++ w--- M PS++ PE-- PGP+ t+ tv--
> >     b++++ G e++++ h---- r++++ y++++
> >     --------END GEEK CODE----------
> >
> >
> >     --
> >     kubuntu-users mailing list
> >     kubuntu-users at lists.ubuntu.com <mailto:
> kubuntu-users at lists.ubuntu.com>
> >     Modify settings or unsubscribe at:
> >     https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
> >
> >
>
>
> --
> http://www.baldwinlinguas.com
> http://www.photodharma.com
> --------BEGIN GEEK CODE--------
> Version: 3.1
> GED/FA/H/L$ d-- s-:-- a C++ L+++ W++ w--- M PS++ PE-- PGP+ t+ tv-- b++++ G
> e++++ h---- r++++ y++++
> --------END GEEK CODE----------
>
>
> --
> kubuntu-users mailing list
> kubuntu-users at lists.ubuntu.com
> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/kubuntu-users/attachments/20070410/558ae7a1/attachment.html>


More information about the kubuntu-users mailing list