scanner Benq 3300U problems

[FTP]

I did try all that and then, when xsane starts, after a while I get "Error 
during device I/O"!

Any hint?

Thanks

George

On Thursday 05 May 2005 14:36, Clay Weber wrote:
> Look here: http://snapscan.sourceforge.net/
> for directions on setting up the path to the required firmware file.
>
> It looks like you need a file called u222v067.bin which will be found on
> your scanner's driver disc. Then you will need to place the file somewhere:
>
> sudo mkdir /usr/share/sane/snapscan
> (this is similar to the path that my mustek (gt68xx based) scanner uses)
>
> then copy the firmware file :
>
> sudo cp u222v067.bin /usr/share/sane/snapscan
>
> Now we need to edit the config file to point it to the firmware:
>
> sudo kwrite /etc/sane.d/snapscan.conf
>
> edit the line "firmware /path/to/your/firmware/file.bin"
> to read "firmware /usr/share/sane/snapscan/u222v067.bin"
>
> This should get you going I hope!
>
> FTP wrote:
> > Hi there,
> >
> > I have a rather weird situation.
> >
> > I try to connect a Benq 3300U scanner and when I start kooka I do get a
> > message:
> >
> > snapscan:libusb:001:003 Acer FlatbedScanner22
> >
> > but then the application displays the notification that "No scanner was
> > found"
> >
> > Now, with Xsane I get the following:
> >
> > Failed to open device `snapscan:libusb:001:003': Invalid argument
> >
> > Any help on that?
> >
> > Thanks
> >
> > George