[Bug 255090] [NEW] Cannot configure LEAP wireless setting with knetworkmanager
debankur
ghosh.debankur at gmail.com
Tue Aug 5 19:29:32 UTC 2008
Public bug reported:
I have a IBM T42p laptop with Atheros wireless card. My office uses
wireless with LEAP/IEEE8021X authentication. I configured
knetworkmanager to connect to the SSID but, it just says trying to
connect. The SSID is not hidden. But if I try to connect to the same
wireless setting via wpa_supplicant, it connects. But when I try to
connect at home with a WPA personal authentication with TPIK, it is able
to connect without any problme.
To connect to wireless within my office, I use the following command.
# sudo wpa_cli terminate
# sudo wpa_supplicant -Bw -i ath0 -D madwifi -c /etc/wpa_supplicant/wpa_supplicant.conf
#sudo killall dhclient3
# sudo dhclient3
debankur at ubuntu:~$ cat /etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
update_config=1
network={
ssid="xxx"
scan_ssid=1
key_mgmt=WPA-EAP
eap=LEAP
identity="my_user_name"
password="password"
}
network={
ssid="xxx"
scan_ssid=1
key_mgmt=IEEE8021X
eap=LEAP
identity="my_user_name"
password="password"
}
debankur at ubuntu:~$ ifconfig
ath0 Link encap:Ethernet HWaddr 00:05:4e:4f:65:12
inet addr:9.45.189.45 Bcast:9.45.189.255 Mask:255.255.254.0
inet6 addr: fe80::205:4eff:fe4f:6512/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:27183 errors:0 dropped:0 overruns:0 frame:0
TX packets:21098 errors:16 dropped:16 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20240691 (19.3 MB) TX bytes:3751351 (3.5 MB)
eth0 Link encap:Ethernet HWaddr 00:0d:60:d0:af:f4
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:44120 errors:0 dropped:0 overruns:0 frame:0
TX packets:36456 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:34258845 (32.6 MB) TX bytes:5749710 (5.4 MB)
Base address:0x8000 Memory:c0240000-c0260000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1573 errors:0 dropped:0 overruns:0 frame:0
TX packets:1573 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:88920 (86.8 KB) TX bytes:88920 (86.8 KB)
wifi0 Link encap:UNSPEC HWaddr 00-05-4E-4F-65-12-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:337112 errors:0 dropped:0 overruns:0 frame:45518
TX packets:25898 errors:17 dropped:16 overruns:0 carrier:0
collisions:0 txqueuelen:199
RX bytes:89597137 (85.4 MB) TX bytes:4851481 (4.6 MB)
Interrupt:11
debankur at ubuntu:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 8.04.1
Release: 8.04
Codename: hardy
debankur at ubuntu:~$
debankur at ubuntu:~$ lsmod | grep ath
ath_pci 101024 0
ath_rate_sample 14336 1
wlan 207728 6 wlan_wep,wlan_ccmp,ath_pci,wlan_scan_sta,ath_rate_sample
ath_hal 192592 3 ath_pci,ath_rate_sample
debankur at ubuntu:~$
debankur at ubuntu:~$ uname -a
Linux ubuntu 2.6.24-19-generic #1 SMP Fri Jul 11 23:41:49 UTC 2008 i686 GNU/Linux
debankur at ubuntu:~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Affects: knetworkmanager (Ubuntu)
Importance: Undecided
Status: New
--
Cannot configure LEAP wireless setting with knetworkmanager
https://bugs.launchpad.net/bugs/255090
You received this bug notification because you are a member of Kubuntu
Team, which is subscribed to knetworkmanager in ubuntu.
More information about the kubuntu-bugs
mailing list