[Bug 32039] Re: k3b and cdrecord priviliges problems

Tue Jun 20 22:26:19 UTC 2006

I try  evrything no sucesss this is my log :
when i can't burn

System
-----------------------
K3b Version: 0.12.14

KDE Version: 3.5.3
QT Version:  3.3.6
Kernel:      2.6.15-23-686
Devices
-----------------------
HL-DT-ST DVDRAM GMA-4080N 0H35 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R séquentiel; DVD-RAM; DVD RW à réinscription limitée; DVD-RW séquentiel; DVD+RW; DVD+R; DVD+R double couche; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Réinscription restreinte]

K3b
-----------------------
Size of filesystem calculated: 231806

Used versions
-----------------------
cdrecord: 2.1.1a01

cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.15-23-686
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
/usr/bin/X11/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/X11/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools at packages.debian.org>.
      The original author should not be bothered with problems of this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GMA-4080N'
Revision       : '0H35'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012 
Profile: 0x0011 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x001A 
Profile: 0x001B 
Profile: 0x002B 
Profile: 0x0010 
Profile: 0x0009 (current)
Profile: 0x000A 
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 12624 kB/s 71x CD 9x DVD
FIFO size      : 4194304 = 4096 KB
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
Track 01: data   452 MB        
Total size:      519 MB (51:30.77) = 231808 sectors
Lout start:      520 MB (51:32/58) = 231808 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11849 (97:24/01)
  ATIP start of lead out: 359847 (79:59/72)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 25
Manufacturer: Taiyo Yuden Company Limited
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 128039
Starting to write CD/DVD at speed 24 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Starting new track at sector: 0
Track 01:    0 of  452 MB written.
/usr/bin/X11/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 BA 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.040s timeout 40s
/usr/bin/X11/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/X11/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/X11/cdrecord: Please report.
/usr/bin/X11/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 380928 bytes
Writing  time:   20.422s
Average write speed 152.4x.
Fixating...
Fixating time:   27.774s
/usr/bin/X11/cdrecord: fifo had 70 puts and 7 gets.
/usr/bin/X11/cdrecord: fifo was 0 times empty and 2 times full, min fill was 95%.

cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=1,0,0 speed=24 -tao driveropts=burnfree -eject -overburn -multi -xa -tsize=231806s - 

mkisofs
-----------------------
231806
INFO: UTF-8 character encoding detected by locale settings.
 Assuming UTF-8 encoded filenames on source filesystem,
 use -input-charset to override.
  0.22% done, estimate finish Tue Jun 13 19:06:11 2006
  0.43% done, estimate finish Tue Jun 13 18:58:52 2006
  0.65% done, estimate finish Tue Jun 13 18:53:49 2006
  0.86% done, estimate finish Tue Jun 13 18:51:16 2006

mkisofs command:
-----------------------
/usr/bin/X11/mkisofs -gui -graft-points -volid Stage clubvivalasalsa - Fev 06 -volset  -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-pje/k3bUHthza.tmp -rational-rock -hide-list /tmp/kde-pje/k3bCdskrc.tmp -joliet -hide-joliet-list /tmp/kde-pje/k3b0gI2mc.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-pje/k3bsEMvCa.tmp

-- 
k3b and cdrecord priviliges problems
https://launchpad.net/bugs/32039