[Unstable/Focal][PULL] Fold snapdragon support into generic

[Paolo Pisati]

This pull request fold the mandatory code and config changes to enable the
snapdragon boards (db410c and db820c) using the Focal arm64 generic flavour.

It contains three code patches: 143b06aad5c56 ("phy: qcom: qmp: Use power_on/off
ops for PCIe") which comes from Linato qcom-lt, while 58c4eb7700b52 ("clk: qcom:
Drop gcc_aggre1_pnoc_ahb_clk clock") and 18a217bff02b3 ("arm64: dts: qcom:
msm8996: Disable USB2 PHY suspend by core") were cherry-picked from
Bionic/snapdragon.

The config changes try to sync Focal arm64 generic as close as possible to
arch/arm64/defconfig (plus a couple of ad-hoc changes for db820c).

I tested mmc, ufs, usb, pci, ethernet and wifi, and they all worked on db410c
and db820c.

Proposing for Unstable/Focal 5.4 generic - since there are so many config
changes, modules-check must be disabled before uploading.


The following changes since commit f77b7acc39ef131f91db7fb6b17185c1ae03f118:

  UBUNTU: Ubuntu-5.4.0-8.10 (2019-12-06 12:56:54 -0600)

are available in the Git repository at:

  git://git.launchpad.net/~p-pisati/ubuntu/+source/linux 1280167e6447c6efc63de3a63a250d12770d8dbf

for you to fetch changes up to 1280167e6447c6efc63de3a63a250d12770d8dbf:

  UBUNTU: [Config] arm64: SCSI_UFSHCD=y (2019-12-09 13:57:36 +0000)

----------------------------------------------------------------
Amit Pundir (1):
      clk: qcom: Drop gcc_aggre1_pnoc_ahb_clk clock

Bjorn Andersson (1):
      phy: qcom: qmp: Use power_on/off ops for PCIe

Manu Gautam (1):
      arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core

Paolo Pisati (37):
      UBUNTU: [Config] updateconfigs
      UBUNTU: [Config] arm64: PINCTRL_MSM8916=y
      UBUNTU: [Config] arm64: PINCTRL_MSM8994=y
      UBUNTU: [Config] arm64: PINCTRL_MSM8996=y
      UBUNTU: [Config] arm64: PINCTRL_MSM8998=y
      UBUNTU: [Config] arm64: REGULATOR_QCOM_RPMH=y
      UBUNTU: [Config] arm64: QCOM_BAM_DMA=y
      UBUNTU: [Config] arm64: QCOM_HIDMA_MGMT=y
      UBUNTU: [Config] arm64: QCOM_HIDMA=y
      UBUNTU: [Config] arm64: COMMON_CLK_QCOM=y
      UBUNTU: [Config] arm64: QCOM_A53PLL=y
      UBUNTU: [Config] arm64: QCOM_CLK_RPMH=y
      UBUNTU: [Config] arm64: HWSPINLOCK_QCOM=y
      UBUNTU: [Config] arm64: QCOM_APCS_IPC=y
      UBUNTU: [Config] arm64: RPMSG_QCOM_GLINK_RPM=y
      UBUNTU: [Config] arm64: QCOM_GENI_SE=y
      UBUNTU: [Config] arm64: QCOM_SMEM=y
      UBUNTU: [Config] arm64: QCOM_SMD_RPM=y
      UBUNTU: [Config] arm64: QCOM_SMP2P=y
      UBUNTU: [Config] arm64: QCOM_SMSM=y
      UBUNTU: [Config] arm64: QCOM_QFPROM=y
      UBUNTU: [Config] arm64: PHY_QCOM_QMP=y
      UBUNTU: [Config] arm64: PHY_QCOM_QUSB2=y
      UBUNTU: [Config] arm64: PHY_QCOM_UFS=y
      UBUNTU: [Config] arm64: QCOM_CLK_APCS_MSM8916=y
      UBUNTU: [Config] arm64: MSM_GCC_8916=y
      UBUNTU: [Config] arm64: MSM_GCC_8994=y
      UBUNTU: [Config] arm64: MSM_MMCC_8996=y
      UBUNTU: [Config] arm64: MSM_GCC_8998=y
      UBUNTU: [Config] arm64: SERIAL_QCOM_GENI=y
      UBUNTU: [Config] arm64: QCOM_TSENS=y
      UBUNTU: [Config] arm64: REGULATOR_QCOM_SMD_RPM=y
      UBUNTU: [Config] arm64: QCOM_CLK_SMD_RPM=y
      UBUNTU: [Config] arm64: RPMSG_QCOM_SMD=y
      UBUNTU: [Config] arm64: MMC_SDHCI_MSM=y
      UBUNTU: [Config] arm64: EXTCON_USB_GPIO=y
      UBUNTU: [Config] arm64: SCSI_UFSHCD=y

 arch/arm64/boot/dts/qcom/msm8996.dtsi              |  4 ++
 debian.master/config/arm64/config.common.arm64     | 40 ++++++++++++++++++++
 debian.master/config/arm64/config.flavour.generic  | 43 +---------------------
 .../config/arm64/config.flavour.snapdragon         | 43 +---------------------
 debian.master/config/armhf/config.common.armhf     |  1 +
 debian.master/config/config.common.ubuntu          |  6 +--
 drivers/clk/qcom/gcc-msm8996.c                     | 15 --------
 drivers/phy/qualcomm/phy-qcom-qmp.c                |  6 +--
 8 files changed, 53 insertions(+), 105 deletions(-)
-- 
bye,
p.