Pull Request: [Jaunty SRU] Apply all Freescale ER9 SP patches to Ubuntu Jaunty kernel
Stefan Bader
stefan.bader at canonical.com
Mon Aug 24 18:23:14 UTC 2009
I pushed the new fsl-imx51 branch to the Jaunty repo. The might still need to
be some packaging fixes required as I note on IRC that the question on how to
get the source package build on the builders and whether a doc package is needed.
-Stefan
Brad Figg wrote:
> BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/414130
>
> Please pull from: git://kernel.ubuntu.com/bradf/ubuntu-jaunty fsl
>
> SRU JUSTIFICATION
>
> IMPACT: Resolve a number of defects and add enhancements
> impacting the supported architecture/platform.
> FIX: Apply all of the ER9-SP release patches. The patches
> will be applied to a git topic branch in the Jaunty
> tree to maintain separation from other architectures
> and flavours.
> TEST: These patches have been QA'd by Freescale.
>
> Resolved Defects
> ---------------------------
> FSL Identifier Description Configs
> -------------- ------------------------------------------- -----------
> ENGR00110228 [MX51_BSP] BOOT: The board will hang when MX51-3STACK
> using "reboot" to reboot. Possibility: 0.1%
>
> ENGR00113184 UBOOT: Request to remove Watchdog disable MX37-3STACK
> codes in MX37 and MX51 uboot MX51-3STACK
> MX51-BABBAGE
>
> ENGR00113197 iMx51 TO2/Linux/"hwclock -w" freeze the MX51-3STACK
> system
>
> ENGR00113369 [MX25_BSP] Boot up: The system can not boot MX25-3STACK
> up without debug board. 100%
>
> ENGR00113376 [MX37] SD can't be detected after fast MX35-3STACK
> removal/insertion MX37-3STACK
> MX51-3STACK
> MX51-BABBAGE
>
> ENGR00113607 Refine and unify the definitions of the two MX31-3STACK
> esdhc host. MX31-ADS
> MX35-3STACK
> MX37-3STACK
> MX51-3STACK
> MX51-BABBAGE
>
> ENGR00113632 Optimize mx31 3ds board standby power ALL/GENERAL
>
> ENGR00113656 MX31 dptc resource defination error MX31-3STACK
> MX31-ADS
>
> ENGR00113666 [MX25/35] CAN triggers the WARN_ON_ONCE in MX25-3STACK
> /kernel/softirq.c when receiving data MX35-3STACK
>
> ENGR00113673 IPUv3:RGB to RGB pixel format change is not MX37-3STACK
> right in IC for PRP viewfinder MX51-3STACK
> MX51-BABBAGE
>
> ENGR00113676 [MX25_BSP]ESAI: Mono file play faster than MX25-3STACK
> than normal when using 5.1 audio card. 100%
>
> ENGR00113742 [MX25_BSP] ALSA: left and right channel MX25-3STACK
> swapped. Possibility: 80%
>
> ENGR00113827 [STM378x]avoid power dip when initializing SD STMP3780
> card
>
> ENGR00113940 [MX31_BSP]FM: FM can not work. 100% MX31-3STACK
>
> ENGR00113990 [MX25_BSP] NAND: The oob test fail. MX25-3STACK
> Possibility: 100%
>
> ENGR00114026 [MX51-3DS] Error on Framebuffer initialization MX51-3STACK
>
> ENGR00114037 [MX31_BSP] PM: LCD can not resume after MX31-3STACK
> entering standby mode.100%
>
> ENGR00114097 MX51 Babbage: Register backlight device only MX51-BABBAGE
> when display card is attached
>
> ENGR00114140 [MX51] SSI underrun in ALSA loopback mode MX51-3STACK
>
> ENGR00114166 MX51 Babbage: can not reboot from SPI NOR MX51-BABBAGE
>
> ENGR00114201 UBOOT: Add MMC configs to mx35 3stack config MX35-3STACK
> file
>
> ENGR00114206 MX35: Fix GPIO pin definitions MX35-3STACK
>
> ENGR00114282 MX51: Need to disable ALP bits so that ARM MX51-3STACK
> memory power gating is disabled MX51-BABBAGE
>
> Resolved Enhancements
> ---------------------------
> FSL Identifier Description Configs
> -------------- ------------------------------------------- -----------
> ENGR00112700 [MX51 Doc] Add RM chapter about CPUFreq MX51-3STACK
> MX51-BABBAGE
>
> ENGR00112701 [MX51 Doc] Add RM chapter for Light sensor MX51-3STACK
> driver
>
> ENGR00113055 Add ability to read EDID from monitor and MX51-BABBAGE
> use data.
>
> ENGR00113364 ASOC: Add AK5702 support for ESAI record MX25-3STACK
>
> ENGR00113541 IPUv3:Support IC combing with local alpha MX37-3STACK
> value contained in pixel. MX51-3STACK
> MX51-BABBAGE
>
>
> ENGR00113546 MX51: set PLL2 as UART parent clk MX51-3STACK
>
> ENGR00113609 GPU: open default frame buffer(fb0) if user MX51-3STACK
> doesn't provide it. MX51-BABBAGE
>
> ENGR00113611 UBOOT: Add FEC support for BBG2. MX51-BABBAGE
>
> ENGR00113743 Add driver to provide direct access to IIM MX25-3STACK
> for MX25
>
> ENGR00113773 Add apm support for mc13892 battery MX51-3STACK
> MX51-BABBAGE
>
> ENGR00113828 mc9s08dz60 keypad driver MX35-3STACK
>
> ENGR00113932 Support IC local alpha blending with MX37-3STACK
> separate channel for Screenlayer library MX51-3STACK
> MX51-BABBAGE
>
> ENGR00113933 Support IC local alpha blending with alpha MX37-3STACK
> value contained in pixel for Screenlayer MX51-3STACK
> library MX51-BABBAGE
>
> ENGR00114005 MX35: Disable 24M OSC in stop mode MX35-3STACK
>
> ENGR00114023 Add Dual monitor capability MX51-BABBAGE
>
> ENGR00114024 Add support for 720p via DVI MX51-BABBAGE
>
> ENGR00114092 MX35: Enable CONFIG_SDMA_IRAM MX35-3STACK
>
> ENGR00114113 MX25: Enable SND_IRAM and SDMA_IRAM default MX25-3STACK
>
> ENGR00114139 MX51 Babbage: remove backlight device MX51-BABBAGE
>
> ENGR00114145 disable MC13892 battery charger on BBG MX51-BABBAGE
> boards
>
> ENGR00114157 Add SPI data flash support for MX51 MX51-BABBAGE
> babbage2.5
>
> ENGR00114178 Support MMC/SD boot and enable dhcp in MX25-3STACK
> uboot on MX25
>
> ENGR00114189 Enlarge the rootfs partition to accommodate MX25-3STACK
> Gnome-mobile MX25-3STACK
> MX31-3STACK
> MX32-3STACK
> MX35-3STACK
> MX37-3STACK
> MX51-3STACK
>
> ENGR00114233 Add support for programming ubifs image on ALL/GENERAL
> nand flash
>
> ENGR00114236 Disable NAND driver interleave mode support ALL/GENERAL
>
> ENGR00114273 [MX233_BSP] IIM:Add virtual IIM platform STMP3780
> device
>
> Brad
--
When all other means of communication fail, try words!
More information about the kernel-team
mailing list