[Bug 610440] Re: ath5k phy0: gain calibration timeout after Kernel Upgrade
FransSchreuder
610440 at bugs.launchpad.net
Wed Nov 3 18:42:43 UTC 2010
I am having the same problem: Hardware AR5007EG (lspci says AR5001), Asus F3Ke laptop. It sometimes connects, and sometimes doesn't.
Was still good with the 2.6.31-rt kernel which was available in 10.04, but not anymore in 10.10.
The interesting thing is that lshw is always the same when it is bad, and always the same when it is good. I will attach my lspci, lshw-good and lshw-bad and the difference between the lshw's.
uname -r:
2.6.35-22-generic
----------------------------------------------------
lspci:
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:02.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0)
00:04.0 PCI bridge: ATI Technologies Inc Device 7914
00:05.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1)
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2)
00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon X2300
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
08:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
08:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
08:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
08:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
---------------------------------------------------------------------------------------------------------------
Diff between lshw-bad and lshw-good:
188c188
< configuration: broadcast=yes driver=ath5k driverversion=2.6.35-22-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg
---
> configuration: broadcast=yes driver=ath5k driverversion=2.6.35-22-generic firmware=N/A ip=[REMOVED] latency=0 link=yes multicast=yes wireless=IEEE 802.11bg
196c196
< logical name: scsi0
---
> logical name: scsi2
208c208
< bus info: scsi at 0:0.0.0
---
> bus info: scsi at 2:0.0.0
218c218
< bus info: scsi at 0:0.0.0,1
---
> bus info: scsi at 2:0.0.0,1
240c240
< bus info: scsi at 0:0.0.0,2
---
> bus info: scsi at 2:0.0.0,2
248c248
< configuration: created=2009-05-15 15:18:03 filesystem=ext4 label=data lastmountpoint=/homeￜܧnￜￜￜￜBￜtm7ￜￜￜￜￜoￜￜￜlxￜￜￜￜￜￜￜￜￜݧnￜￜￜ modified=2010-11-02 18:45:43 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,data=ordered mounted=2010-10-31 21:00:48 state=mounted
---
> configuration: created=2009-05-15 15:18:03 filesystem=ext4 label=data lastmountpoint=/homeï¿œ\oￜￜￜ_ï¿œhￜￜïￜￜnￜￜￜￜczￜￜￜￜￜp{ￜￜￜￜￜￜￜￜￜ]oￜￜￜ modified=2010-11-02 18:53:20 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,data=ordered mounted=2010-11-02 18:45:44 state=mounted
339c339
< logical name: scsi4
---
> logical name: scsi0
351c351
< bus info: scsi at 4:0.0.0
---
> bus info: scsi at 0:0.0.0
--------------------------------------------------------------------
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-22-generic (buildd at yellow) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:45:36 UTC 2010 (Ubuntu 2.6.35-22.35-generic 2.6.35.4)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=ee0512a1-70e3-4c17-adcf-d055a4b0f845 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff98000 (usable)
[ 0.000000] BIOS-e820: 000000007ff98000 - 000000007ffa0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7ff98 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007ff98000 (usable)
[ 0.000000] modified: 000000007ff98000 - 000000007ffa0000 (ACPI NVS)
[ 0.000000] modified: 000000007ffa0000 - 000000007ffae000 (ACPI data)
[ 0.000000] modified: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
[ 0.000000] modified: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ff98000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ff98000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ff98000 @ 16000-1a000
[ 0.000000] RAMDISK: 37573000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f8d90 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ffa0000 00048 (v01 _ASUS_ Notebook 20070720 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ffa0200 00084 (v02 072007 FACP1434 20070720 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ffa0640 096EE (v01 F3K00 F3K00001 00000001 INTL 20051117)
[ 0.000000] ACPI: FACS 000000007ffae000 00040
[ 0.000000] ACPI: APIC 000000007ffa0390 0005C (v01 072007 APIC1434 20070720 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ffa03f0 0003C (v01 072007 OEMMCFG 20070720 MSFT 00000097)
[ 0.000000] ACPI: SLIC 000000007ffa0430 00176 (v01 _ASUS_ Notebook 20070720 MSFT 00000097)
[ 0.000000] ACPI: ECDT 000000007ffa05e0 00054 (v01 072007 OEMECDT 20070720 MSFT 00000097)
[ 0.000000] ACPI: BOOT 000000007ffa05b0 00028 (v01 072007 BOOT1434 20070720 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ffae040 0007D (v01 072007 OEMB1434 20070720 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ffa9d30 00038 (v01 072007 OEMHPET 20070720 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007ffa9d70 001EA (v01 AMI POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ff98000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007ff98000
[ 0.000000] NODE_DATA [0000000001d18180 - 0000000001d1d17f]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002600000-ffff8800041fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ff98
[ 0.000000] On node 0 totalpages: 524071
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 512977 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [18000 - 187ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u1048576
[ 0.000000] pcpu-alloc: s91520 r8192 d23168 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516904
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=ee0512a1-70e3-4c17-adcf-d055a4b0f845 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 1e000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Subtract (45 early reservations)
[ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS
[ 0.000000] #2 [0037573000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001d18000 - 0001d1816d] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009fc00 - 00000fd090] BIOS reserved
[ 0.000000] #7 [00000fd1f4 - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000fd090 - 00000fd1f4] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #11 [0000016000 - 0000018000] PGTABLE
[ 0.000000] #12 [0001d18180 - 0001d1d180] NODE_DATA
[ 0.000000] #13 [0001d1d180 - 0001d1e180] BOOTMEM
[ 0.000000] #14 [0001d17140 - 0001d172c0] BOOTMEM
[ 0.000000] #15 [000251f000 - 0002520000] BOOTMEM
[ 0.000000] #16 [0002520000 - 0002521000] BOOTMEM
[ 0.000000] #17 [0002600000 - 0004200000] MEMMAP 0
[ 0.000000] #18 [0001d172c0 - 0001d17440] BOOTMEM
[ 0.000000] #19 [0001d1e180 - 0001d2a180] BOOTMEM
[ 0.000000] #20 [0001d2b000 - 0001d2c000] BOOTMEM
[ 0.000000] #21 [0001d17440 - 0001d17481] BOOTMEM
[ 0.000000] #22 [0001d174c0 - 0001d17503] BOOTMEM
[ 0.000000] #23 [0001d17540 - 0001d17738] BOOTMEM
[ 0.000000] #24 [0001d17740 - 0001d177a8] BOOTMEM
[ 0.000000] #25 [0001d177c0 - 0001d17828] BOOTMEM
[ 0.000000] #26 [0001d17840 - 0001d178a8] BOOTMEM
[ 0.000000] #27 [0001d178c0 - 0001d17928] BOOTMEM
[ 0.000000] #28 [0001d17940 - 0001d179a8] BOOTMEM
[ 0.000000] #29 [0001d179c0 - 0001d17a28] BOOTMEM
[ 0.000000] #30 [0001d17a40 - 0001d17aa8] BOOTMEM
[ 0.000000] #31 [0001d17ac0 - 0001d17b28] BOOTMEM
[ 0.000000] #32 [0001d17b40 - 0001d17b60] BOOTMEM
[ 0.000000] #33 [0001d17b80 - 0001d17bea] BOOTMEM
[ 0.000000] #34 [0001d17c00 - 0001d17c6a] BOOTMEM
[ 0.000000] #35 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #36 [0001f00000 - 0001f1e000] BOOTMEM
[ 0.000000] #37 [0001d17c80 - 0001d17c88] BOOTMEM
[ 0.000000] #38 [0001d17cc0 - 0001d17cc8] BOOTMEM
[ 0.000000] #39 [0001d17d00 - 0001d17d08] BOOTMEM
[ 0.000000] #40 [0001d17d40 - 0001d17d50] BOOTMEM
[ 0.000000] #41 [0001d17d80 - 0001d17ec0] BOOTMEM
[ 0.000000] #42 [0001d17ec0 - 0001d17f20] BOOTMEM
[ 0.000000] #43 [0001d17f40 - 0001d17fa0] BOOTMEM
[ 0.000000] #44 [0001d2c000 - 0001d34000] BOOTMEM
[ 0.000000] Memory: 2043072k/2096736k available (5708k kernel code, 452k absent, 53212k reserved, 5382k data, 908k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 20971520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 797.836 MHz processor.
[ 0.040021] Calibrating delay loop (skipped), value calculated using timer frequency.. 1595.67 BogoMIPS (lpj=7978360)
[ 0.040035] pid_max: default: 32768 minimum: 301
[ 0.040102] Security Framework initialized
[ 0.040151] AppArmor: AppArmor initialized
[ 0.040157] Yama: becoming mindful.
[ 0.040906] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.044105] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.045585] Mount-cache hash table entries: 256
[ 0.046013] Initializing cgroup subsys ns
[ 0.046023] Initializing cgroup subsys cpuacct
[ 0.046036] Initializing cgroup subsys memory
[ 0.046060] Initializing cgroup subsys devices
[ 0.046068] Initializing cgroup subsys freezer
[ 0.046075] Initializing cgroup subsys net_cls
[ 0.046154] tseg: 0000000000
[ 0.046208] CPU: Physical Processor ID: 0
[ 0.046213] CPU: Processor Core ID: 0
[ 0.046219] mce: CPU supports 5 MCE banks
[ 0.046249] using C1E aware idle routine
[ 0.046257] Performance Events: AMD PMU driver.
[ 0.046271] ... version: 0
[ 0.046276] ... bit width: 48
[ 0.046281] ... generic registers: 4
[ 0.046286] ... value mask: 0000ffffffffffff
[ 0.046291] ... max period: 00007fffffffffff
[ 0.046296] ... fixed-purpose events: 0
[ 0.046300] ... event mask: 000000000000000f
[ 0.051228] ACPI: Core revision 20100428
[ 0.100022] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.100041] ftrace: allocating 22680 entries in 89 pages
[ 0.110230] Setting APIC routing to flat
[ 0.110621] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.216258] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 01
[ 0.220000] Booting Node 0, Processors #1 Ok.
[ 0.050000] System has AMD C1E enabled
[ 0.370109] Switch to broadcast mode on CPU1
[ 0.370120] Brought up 2 CPUs
[ 0.370128] Total of 2 processors activated (3191.70 BogoMIPS).
[ 0.370640] Switch to broadcast mode on CPU0
[ 0.370640] devtmpfs: initialized
[ 0.372503] regulator: core version 0.5
[ 0.372559] Time: 17:45:24 Date: 11/02/10
[ 0.372680] NET: Registered protocol family 16
[ 0.372760] Trying to unpack rootfs image as initramfs...
[ 0.373072] node 0 link 0: io port [1000, ffffff]
[ 0.373081] TOM: 0000000080000000 aka 2048M
[ 0.373090] node 0 link 0: mmio [e0000000, efffffff]
[ 0.373098] node 0 link 0: mmio [80000000, dfffffff]
[ 0.373106] node 0 link 0: mmio [a0000, bffff]
[ 0.373113] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.373121] bus: [00, ff] on node 0 link 0
[ 0.373129] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.373135] bus: 00 index 1 [mem 0x80000000-0xfcffffffff]
[ 0.373141] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.373161] ACPI: bus type pci registered
[ 0.373339] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.373348] PCI: not using MMCONFIG
[ 0.373353] PCI: Using configuration type 1 for base access
[ 0.390798] bio: create slab <bio-0> at 0
[ 0.394154] ACPI: EC: EC description table is found, configuring boot EC
[ 0.399156] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.427327] ACPI: Interpreter enabled
[ 0.427336] ACPI: (supports S0 S3 S4 S5)
[ 0.427410] ACPI: Using IOAPIC for interrupt routing
[ 0.428218] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.432929] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.514671] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.515583] ACPI: No dock devices found.
[ 0.515593] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.516080] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.517056] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.517063] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.517071] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.517079] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.517086] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.517093] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xc00000fd] (ignored)
[ 0.517230] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.517238] pci 0000:00:02.0: PME# disabled
[ 0.517317] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.517324] pci 0000:00:04.0: PME# disabled
[ 0.517401] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.517408] pci 0000:00:05.0: PME# disabled
[ 0.517495] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.517502] pci 0000:00:06.0: PME# disabled
[ 0.517581] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.517588] pci 0000:00:07.0: PME# disabled
[ 0.517665] pci 0000:00:12.0: reg 10: [io 0xe800-0xe807]
[ 0.517678] pci 0000:00:12.0: reg 14: [io 0xe400-0xe403]
[ 0.517691] pci 0000:00:12.0: reg 18: [io 0xe000-0xe007]
[ 0.517705] pci 0000:00:12.0: reg 1c: [io 0xdc00-0xdc03]
[ 0.517718] pci 0000:00:12.0: reg 20: [io 0xd800-0xd80f]
[ 0.517731] pci 0000:00:12.0: reg 24: [mem 0xfebffc00-0xfebfffff]
[ 0.517762] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.517826] pci 0000:00:13.0: reg 10: [mem 0xfebfe000-0xfebfefff]
[ 0.517915] pci 0000:00:13.1: reg 10: [mem 0xfebfd000-0xfebfdfff]
[ 0.518002] pci 0000:00:13.2: reg 10: [mem 0xfebfc000-0xfebfcfff]
[ 0.518090] pci 0000:00:13.3: reg 10: [mem 0xfebfb000-0xfebfbfff]
[ 0.518178] pci 0000:00:13.4: reg 10: [mem 0xfebfa000-0xfebfafff]
[ 0.518289] pci 0000:00:13.5: reg 10: [mem 0xfebff800-0xfebff8ff]
[ 0.518370] pci 0000:00:13.5: supports D1 D2
[ 0.518376] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.518385] pci 0000:00:13.5: PME# disabled
[ 0.518450] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.518557] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.518571] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.518584] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.518597] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.518610] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.518691] pci 0000:00:14.2: reg 10: [mem 0xfebf4000-0xfebf7fff 64bit]
[ 0.518759] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.518768] pci 0000:00:14.2: PME# disabled
[ 0.519146] PCI: peer root bus 00 res updated from pci conf
[ 0.519236] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.519249] pci 0000:01:00.0: reg 14: [io 0x8800-0x88ff]
[ 0.519261] pci 0000:01:00.0: reg 18: [mem 0xfd7f0000-0xfd7fffff]
[ 0.519288] pci 0000:01:00.0: reg 30: [mem 0xfd7c0000-0xfd7dffff pref]
[ 0.519321] pci 0000:01:00.0: supports D1 D2
[ 0.519342] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.519361] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.519371] pci 0000:00:02.0: bridge window [io 0x8000-0x8fff]
[ 0.519380] pci 0000:00:02.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.519391] pci 0000:00:02.0: bridge window [mem 0xcbf00000-0xdbefffff 64bit pref]
[ 0.519447] pci 0000:00:04.0: PCI bridge to [bus 02-04]
[ 0.519456] pci 0000:00:04.0: bridge window [io 0x9000-0xafff]
[ 0.519465] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfe7fffff]
[ 0.519475] pci 0000:00:04.0: bridge window [mem 0xdbf00000-0xdfefffff 64bit pref]
[ 0.519529] pci 0000:00:05.0: PCI bridge to [bus 05-05]
[ 0.519539] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.519548] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.519559] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.519661] pci 0000:06:00.0: reg 10: [io 0xb800-0xb8ff]
[ 0.519689] pci 0000:06:00.0: reg 18: [mem 0xfe8ff000-0xfe8fffff 64bit]
[ 0.519718] pci 0000:06:00.0: reg 30: [mem 0xfe8e0000-0xfe8effff pref]
[ 0.519774] pci 0000:06:00.0: supports D1 D2
[ 0.519780] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.519790] pci 0000:06:00.0: PME# disabled
[ 0.519818] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.519835] pci 0000:00:06.0: PCI bridge to [bus 06-06]
[ 0.519844] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff]
[ 0.519853] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.519864] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.519961] pci 0000:07:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit]
[ 0.520059] pci 0000:07:00.0: PME# supported from D3hot
[ 0.520068] pci 0000:07:00.0: PME# disabled
[ 0.520096] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.520112] pci 0000:00:07.0: PCI bridge to [bus 07-07]
[ 0.520122] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.520131] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.520141] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.520212] pci 0000:08:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.520219] pci 0000:08:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.520239] pci 0000:08:01.0: reg 10: [mem 0xfeaff800-0xfeafffff]
[ 0.520326] pci 0000:08:01.0: PME# supported from D0 D3hot D3cold
[ 0.520336] pci 0000:08:01.0: PME# disabled
[ 0.520395] pci 0000:08:01.1: reg 10: [mem 0xfeaff400-0xfeaff4ff]
[ 0.520481] pci 0000:08:01.1: supports D1 D2
[ 0.520487] pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.520497] pci 0000:08:01.1: PME# disabled
[ 0.520555] pci 0000:08:01.2: reg 10: [mem 0xfeafec00-0xfeafecff]
[ 0.520641] pci 0000:08:01.2: supports D1 D2
[ 0.520647] pci 0000:08:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.520657] pci 0000:08:01.2: PME# disabled
[ 0.520722] pci 0000:08:01.3: reg 10: [mem 0xfeafe800-0xfeafe8ff]
[ 0.520809] pci 0000:08:01.3: supports D1 D2
[ 0.520815] pci 0000:08:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.520825] pci 0000:08:01.3: PME# disabled
[ 0.520917] pci 0000:00:14.4: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.520927] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.520938] pci 0000:00:14.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.520948] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.520957] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.520965] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.520973] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.521025] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.521760] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.548942] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.549337] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15)
[ 0.549724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.550129] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.550516] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.550903] ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
[ 0.551294] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.551684] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.551838] HEST: Table is not found!
[ 0.552136] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.552153] vgaarb: loaded
[ 0.552608] SCSI subsystem initialized
[ 0.560000] libata version 3.00 loaded.
[ 0.560000] usbcore: registered new interface driver usbfs
[ 0.560000] usbcore: registered new interface driver hub
[ 0.560000] usbcore: registered new device driver usb
[ 0.560000] ACPI: WMI: Mapper loaded
[ 0.560000] PCI: Using ACPI for IRQ routing
[ 0.560000] PCI: pci_cache_line_size set to 64 bytes
[ 0.560000] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.560000] reserve RAM buffer: 000000007ff98000 - 000000007fffffff
[ 0.560000] NetLabel: Initializing
[ 0.560000] NetLabel: domain hash size = 128
[ 0.560000] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.560000] NetLabel: unlabeled traffic allowed by default
[ 0.560000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.560000] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.560000] Switching to clocksource hpet
[ 0.587871] AppArmor: AppArmor Filesystem Enabled
[ 0.587924] pnp: PnP ACPI init
[ 0.587979] ACPI: bus type pnp registered
[ 0.595897] pnp: PnP ACPI: found 13 devices
[ 0.595903] ACPI: ACPI bus type pnp unregistered
[ 0.595942] system 00:06: [io 0x0250-0x0253] has been reserved
[ 0.595951] system 00:06: [io 0x0256-0x025f] has been reserved
[ 0.595962] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.595970] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.595993] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.596001] system 00:08: [io 0x040b] has been reserved
[ 0.596008] system 00:08: [io 0x04d6] has been reserved
[ 0.596016] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.596024] system 00:08: [io 0x0c14] has been reserved
[ 0.596031] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.596039] system 00:08: [io 0x0c52] has been reserved
[ 0.596047] system 00:08: [io 0x0c6c] has been reserved
[ 0.596054] system 00:08: [io 0x0c6f] has been reserved
[ 0.596062] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.596069] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.596077] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.596095] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.596103] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.596111] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.596119] system 00:08: [io 0x0b10-0x0b1f] has been reserved
[ 0.596127] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.596135] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.596143] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.596153] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.596161] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.596178] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.596194] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.596203] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.596211] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.596220] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.596229] system 00:0c: [mem 0xe0000000-0xffffffff] could not be reserved
[ 0.605194] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.605204] pci 0000:00:02.0: bridge window [io 0x8000-0x8fff]
[ 0.605214] pci 0000:00:02.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.605223] pci 0000:00:02.0: bridge window [mem 0xcbf00000-0xdbefffff 64bit pref]
[ 0.605234] pci 0000:00:04.0: PCI bridge to [bus 02-04]
[ 0.605241] pci 0000:00:04.0: bridge window [io 0x9000-0xafff]
[ 0.605249] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfe7fffff]
[ 0.605258] pci 0000:00:04.0: bridge window [mem 0xdbf00000-0xdfefffff 64bit pref]
[ 0.605268] pci 0000:00:05.0: PCI bridge to [bus 05-05]
[ 0.605274] pci 0000:00:05.0: bridge window [io disabled]
[ 0.605281] pci 0000:00:05.0: bridge window [mem disabled]
[ 0.605288] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 0.605298] pci 0000:00:06.0: PCI bridge to [bus 06-06]
[ 0.605305] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff]
[ 0.605315] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.605322] pci 0000:00:06.0: bridge window [mem pref disabled]
[ 0.605333] pci 0000:00:07.0: PCI bridge to [bus 07-07]
[ 0.605338] pci 0000:00:07.0: bridge window [io disabled]
[ 0.605347] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.605354] pci 0000:00:07.0: bridge window [mem pref disabled]
[ 0.605367] pci 0000:00:14.4: PCI bridge to [bus 08-08]
[ 0.605372] pci 0000:00:14.4: bridge window [io disabled]
[ 0.605383] pci 0000:00:14.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.605392] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.605423] pci 0000:00:02.0: setting latency timer to 64
[ 0.605437] pci 0000:00:04.0: setting latency timer to 64
[ 0.605450] pci 0000:00:05.0: setting latency timer to 64
[ 0.605463] pci 0000:00:06.0: setting latency timer to 64
[ 0.605477] pci 0000:00:07.0: setting latency timer to 64
[ 0.605494] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.605500] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.605507] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.605514] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
[ 0.605520] pci_bus 0000:01: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.605527] pci_bus 0000:01: resource 2 [mem 0xcbf00000-0xdbefffff 64bit pref]
[ 0.605534] pci_bus 0000:02: resource 0 [io 0x9000-0xafff]
[ 0.605541] pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfe7fffff]
[ 0.605547] pci_bus 0000:02: resource 2 [mem 0xdbf00000-0xdfefffff 64bit pref]
[ 0.605555] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
[ 0.605562] pci_bus 0000:06: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.605569] pci_bus 0000:07: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.605576] pci_bus 0000:08: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.605583] pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
[ 0.605590] pci_bus 0000:08: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.605597] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.605716] NET: Registered protocol family 2
[ 0.606076] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.608653] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.613788] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.615035] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.615043] TCP reno registered
[ 0.615083] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.615158] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.615454] NET: Registered protocol family 1
[ 0.760135] pci 0000:01:00.0: Boot video device
[ 0.760180] PCI: CLS 64 bytes, default 64
[ 0.808445] Simple Boot Flag at 0x52 set to 0x1
[ 0.809009] Scanning for low memory corruption every 60 seconds
[ 0.809416] audit: initializing netlink socket (disabled)
[ 0.809457] type=2000 audit(1288719923.800:1): initialized
[ 0.847269] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.856511] VFS: Disk quotas dquot_6.5.2
[ 0.856831] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.860798] fuse init (API version 7.14)
[ 0.861379] msgmni has been set to 3990
[ 0.862918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.862927] io scheduler noop registered
[ 0.862932] io scheduler deadline registered
[ 0.863165] io scheduler cfq registered (default)
[ 0.864018] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.864070] alloc irq_desc for 40 on node 0
[ 0.864080] alloc kstat_irqs on node 0
[ 0.864116] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.864526] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.864566] alloc irq_desc for 41 on node 0
[ 0.864573] alloc kstat_irqs on node 0
[ 0.864593] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[ 0.865081] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.865129] alloc irq_desc for 42 on node 0
[ 0.865136] alloc kstat_irqs on node 0
[ 0.865158] pcieport 0000:00:05.0: irq 42 for MSI/MSI-X
[ 0.865571] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.865619] alloc irq_desc for 43 on node 0
[ 0.865626] alloc kstat_irqs on node 0
[ 0.865648] pcieport 0000:00:06.0: irq 43 for MSI/MSI-X
[ 0.866056] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.866105] alloc irq_desc for 44 on node 0
[ 0.866110] alloc kstat_irqs on node 0
[ 0.866126] pcieport 0000:00:07.0: irq 44 for MSI/MSI-X
[ 0.866542] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.866912] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.868275] ACPI: AC Adapter [AC0] (off-line)
[ 0.868669] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.868688] ACPI: Power Button [PWRB]
[ 0.868938] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.868953] ACPI: Sleep Button [SLPB]
[ 0.869229] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.872273] ACPI: Lid Switch [LID]
[ 0.872568] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.872583] ACPI: Power Button [PWRF]
[ 0.874985] ACPI: acpi_idle registered with cpuidle
[ 0.875129] ACPI: processor limited to max C-state 1
[ 0.899296] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.899351] ACPI: Thermal Zone [THRM] (21 C)
[ 0.899834] ERST: Table is not found!
[ 0.901207] Linux agpgart interface v0.103
[ 0.901219] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.907486] brd: module loaded
[ 0.909875] loop: module loaded
[ 0.918427] alloc irq_desc for 16 on node 0
[ 0.918435] alloc kstat_irqs on node 0
[ 0.918462] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.918637] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 0.921570] Fixed MDIO Bus: probed
[ 0.921814] PPP generic driver version 2.4.2
[ 0.922012] tun: Universal TUN/TAP device driver, 1.6
[ 0.922018] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 0.922475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.922805] alloc irq_desc for 19 on node 0
[ 0.922814] alloc kstat_irqs on node 0
[ 0.922835] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.922914] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 0.923267] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 0.923378] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 0.923411] ehci_hcd 0000:00:13.5: debug port 1
[ 0.923524] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfebff800
[ 0.940140] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 0.940983] hub 1-0:1.0: USB hub found
[ 0.941005] hub 1-0:1.0: 10 ports detected
[ 0.941662] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.941935] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.942006] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.942256] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.942358] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfebfe000
[ 1.004616] hub 2-0:1.0: USB hub found
[ 1.004637] hub 2-0:1.0: 2 ports detected
[ 1.005168] alloc irq_desc for 17 on node 0
[ 1.005175] alloc kstat_irqs on node 0
[ 1.005191] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.005251] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.005515] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.005623] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfebfd000
[ 1.064667] hub 3-0:1.0: USB hub found
[ 1.064685] hub 3-0:1.0: 2 ports detected
[ 1.065223] alloc irq_desc for 18 on node 0
[ 1.065228] alloc kstat_irqs on node 0
[ 1.065243] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.065296] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.065528] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.065628] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfebfc000
[ 1.124568] hub 4-0:1.0: USB hub found
[ 1.124584] hub 4-0:1.0: 2 ports detected
[ 1.125133] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.125195] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.125508] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.125581] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfebfb000
[ 1.184891] hub 5-0:1.0: USB hub found
[ 1.184916] hub 5-0:1.0: 2 ports detected
[ 1.185691] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.185748] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.186058] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.186129] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfebfa000
[ 1.244873] hub 6-0:1.0: USB hub found
[ 1.244897] hub 6-0:1.0: 2 ports detected
[ 1.245483] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.246043] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.248486] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.249917] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.249955] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.249966] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.249977] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.249987] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.250605] mice: PS/2 mouse device common for all mice
[ 1.251617] rtc_cmos 00:02: RTC can wake from S4
[ 1.251878] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.251935] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.252455] device-mapper: uevent: version 1.0.3
[ 1.252976] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel at redhat.com
[ 1.253309] device-mapper: multipath: version 1.1.1 loaded
[ 1.253317] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.254022] cpuidle: using governor ladder
[ 1.254027] cpuidle: using governor menu
[ 1.255328] TCP cubic registered
[ 1.256043] NET: Registered protocol family 10
[ 1.258613] lo: Disabled Privacy Extensions
[ 1.260641] NET: Registered protocol family 17
[ 1.260693] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 1.260924] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 (2 cpu cores) (version 2.20.00)
[ 1.261476] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13
[ 1.261483] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14
[ 1.261488] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1e
[ 1.264990] PM: Resume from disk failed.
[ 1.265026] registered taskstats version 1
[ 1.264553] Freeing initrd memory: 10740k freed
[ 1.265838] Magic number: 2:220:794
[ 1.266021] rtc_cmos 00:02: setting system clock to 2010-11-02 17:45:25 UTC (1288719925)
[ 1.266025] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.266027] EDD information not available.
[ 1.271764] Freeing unused kernel memory: 908k freed
[ 1.272244] Write protecting the kernel read-only data: 10240k
[ 1.272489] Freeing unused kernel memory: 416k freed
[ 1.272981] Freeing unused kernel memory: 1644k freed
[ 1.284753] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.318459] udev[117]: starting version 163
[ 1.443821] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.443868] r8169 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.443941] r8169 0000:06:00.0: setting latency timer to 64
[ 1.444120] alloc irq_desc for 45 on node 0
[ 1.444123] alloc kstat_irqs on node 0
[ 1.444144] r8169 0000:06:00.0: irq 45 for MSI/MSI-X
[ 1.447061] r8169 0000:06:00.0: eth0: RTL8168b/8111b at 0xffffc9000032c000, 00:1b:fc:f3:c9:34, XID 18000000 IRQ 45
[ 1.451756] ACPI: Battery Slot [BAT0] (battery present)
[ 1.471669] sdhci: Secure Digital Host Controller Interface driver
[ 1.471673] sdhci: Copyright(c) Pierre Ossman
[ 1.480486] ahci 0000:00:12.0: version 3.0
[ 1.480517] alloc irq_desc for 22 on node 0
[ 1.480520] alloc kstat_irqs on node 0
[ 1.480535] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.480615] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.480735] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.480741] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.501662] sdhci-pci 0000:08:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 1.501693] alloc irq_desc for 21 on node 0
[ 1.501696] alloc kstat_irqs on node 0
[ 1.501716] sdhci-pci 0000:08:01.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.502802] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.503976] Registered led device: mmc0::
[ 1.505111] mmc0: SDHCI controller on PCI [0000:08:01.1] using DMA
[ 1.510808] scsi0 : ahci
[ 1.515208] alloc irq_desc for 20 on node 0
[ 1.515214] alloc kstat_irqs on node 0
[ 1.515232] firewire_ohci 0000:08:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.522455] scsi1 : ahci
[ 1.537446] scsi2 : ahci
[ 1.540027] Clocksource tsc unstable (delta = 344324037 ns)
[ 1.581469] scsi3 : ahci
[ 1.582077] ata1: SATA max UDMA/133 abar m1024 at 0xfebffc00 port 0xfebffd00 irq 22
[ 1.582083] ata2: SATA max UDMA/133 abar m1024 at 0xfebffc00 port 0xfebffd80 irq 22
[ 1.582087] ata3: SATA max UDMA/133 abar m1024 at 0xfebffc00 port 0xfebffe00 irq 22
[ 1.582092] ata4: SATA max UDMA/133 abar m1024 at 0xfebffc00 port 0xfebffe80 irq 22
[ 1.623050] scsi4 : pata_atiixp
[ 1.642695] scsi5 : pata_atiixp
[ 1.648866] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.648869] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.770054] firewire_ohci: Added fw-ohci device 0000:08:01.0, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x0
[ 1.820546] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WR02, max UDMA/33
[ 1.860511] ata5.00: configured for UDMA/33
[ 1.872554] usb 6-1: new full speed USB device using ohci_hcd and address 2
[ 1.932567] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.940068] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.972563] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.220055] ata1: softreset failed (device not ready)
[ 2.220061] ata1: applying SB600 PMP SRST workaround and retrying
[ 2.250279] firewire_core: created device fw0: GUID 00e01800039d2f56, S400
[ 2.400069] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.401223] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 2.401229] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.401254] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.402591] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.402595] ata1.00: configured for UDMA/100
[ 2.420296] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 2.420728] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.420788] sd 0:0:0:0: [sda] Write Protect is off
[ 2.420792] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.420815] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.420857] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.421300] sda:
[ 2.424693] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WR02 PQ: 0 ANSI: 5
[ 2.435842] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.435846] Uniform CD-ROM driver Revision: 3.20
[ 2.435991] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.436097] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.844461] sda1 < sda5 sda6 > sda2
[ 2.887247] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.514652] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 19.184010] udev[405]: starting version 163
[ 19.255532] Adding 2928636k swap on /dev/sda6. Priority:-1 extents:1 across:2928636k
[ 19.266202] lp: driver loaded but no devices found
[ 19.399574] asus_laptop: Asus Laptop Support version 0.42
[ 19.451923] asus_laptop: F3Ke model detected
[ 19.467878] asus_laptop: Backlight controlled by ACPI video driver
[ 19.467999] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
[ 19.538918] acpi device:26: registered as cooling_device2
[ 19.539363] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:22/LNXVIDEO:01/input/input6
[ 19.539598] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 19.610312] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 19.691107] [drm] Initialized drm 1.1.0 20060810
[ 19.765318] type=1400 audit(1288719943.993:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=558 comm="apparmor_parser"
[ 19.765657] type=1400 audit(1288719943.993:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=558 comm="apparmor_parser"
[ 19.765850] type=1400 audit(1288719943.993:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=558 comm="apparmor_parser"
[ 19.796056] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 19.826332] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 19.838673] EDAC MC: Ver: 2.1.0 Oct 16 2010
[ 19.856363] Bluetooth: Core ver 2.15
[ 19.856444] NET: Registered protocol family 31
[ 19.856447] Bluetooth: HCI device and connection manager initialized
[ 19.856452] Bluetooth: HCI socket layer initialized
[ 19.860175] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 19.870788] EDAC amd64_edac: Ver: 3.3.0 Oct 16 2010
[ 19.899859] usbcore: registered new interface driver btusb
[ 19.950064] r852 0000:08:01.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 19.950623] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 19.950633] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 19.950635] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 19.950637] (Note that use of the override may cause unknown side effects.)
[ 19.950686] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 19.992041] r852: driver loaded succesfully
[ 19.998179] Linux video capture interface: v2.00
[ 20.062402] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (174f:5a35)
[ 20.070507] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-6/1-6:1.0/input/input7
[ 20.070663] usbcore: registered new interface driver uvcvideo
[ 20.070666] USB Video Class driver (v0.1.0)
[ 20.105421] [drm] radeon defaulting to kernel modesetting.
[ 20.105426] [drm] radeon kernel modesetting enabled.
[ 20.110491] cfg80211: Calling CRDA to update world regulatory domain
[ 20.121586] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 20.121596] radeon 0000:01:00.0: setting latency timer to 64
[ 20.190784] [drm] initializing kernel modesetting (RV515 0x1002:0x718A).
[ 20.249609] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8
[ 20.266393] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
[ 20.289571] [drm] register mmio base: 0xFD7F0000
[ 20.289575] [drm] register mmio size: 65536
[ 20.290479] ATOM BIOS: Asus
[ 20.290525] [drm] Generation 2 PCI interface, using max accessible memory
[ 20.290534] radeon 0000:01:00.0: VRAM: 128M 0x00000000 - 0x07FFFFFF (128M used)
[ 20.290539] radeon 0000:01:00.0: GTT: 512M 0x08000000 - 0x27FFFFFF
[ 20.290766] alloc irq_desc for 46 on node 0
[ 20.290769] alloc kstat_irqs on node 0
[ 20.290787] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[ 20.290795] radeon 0000:01:00.0: radeon: using MSI.
[ 20.290882] [drm] radeon: irq initialized.
[ 20.291132] [drm] Detected VRAM RAM=128M, BAR=128M
[ 20.291138] [drm] RAM width 64bits DDR
[ 20.332826] [TTM] Zone kernel: Available graphics memory: 1028390 kiB.
[ 20.332832] [TTM] Initializing pool allocator.
[ 20.332907] [drm] radeon: 128M of VRAM memory ready
[ 20.332910] [drm] radeon: 512M of GTT memory ready.
[ 20.333014] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 20.335849] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 20.337105] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 20.337314] [drm] Loading R500 Microcode
[ 20.358292] [drm] radeon: ring at 0x0000000008000000
[ 20.358334] [drm] ring test succeeded in 9 usecs
[ 20.359978] [drm] radeon: ib pool ready.
[ 20.360614] [drm] ib test succeeded in 0 usecs
[ 20.360719] [drm] Default TV standard: PAL
[ 20.360742] [drm] Default TV standard: PAL
[ 20.363176] [drm] Default TV standard: PAL
[ 20.364750] [drm] Radeon Display Connectors
[ 20.364753] [drm] Connector 0:
[ 20.364755] [drm] VGA
[ 20.364759] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 20.364761] [drm] Encoders:
[ 20.364764] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 20.364767] [drm] Connector 1:
[ 20.364769] [drm] LVDS
[ 20.364773] [drm] DDC: 0xc54 0xc54 0xc58 0xc58 0xc5c 0xc5c 0xc60 0xc60
[ 20.364775] [drm] Encoders:
[ 20.364779] [drm] LCD1: INTERNAL_LVTM1
[ 20.364782] [drm] Connector 2:
[ 20.364784] [drm] S-video
[ 20.364786] [drm] Encoders:
[ 20.364789] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 20.364793] [drm] Connector 3:
[ 20.364795] [drm] DVI-I
[ 20.364796] [drm] HPD1
[ 20.364800] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 20.364803] [drm] Encoders:
[ 20.364806] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 20.382291] cfg80211: World regulatory domain updated:
[ 20.382296] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.382301] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.382305] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.382308] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.382311] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.382315] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.420265] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 20.450150] ath5k 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 20.450163] ath5k 0000:07:00.0: setting latency timer to 64
[ 20.450274] ath5k 0000:07:00.0: registered as 'phy0'
[ 20.907904] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.955832] [drm] radeon: power management initialized
[ 21.006108] ath: EEPROM regdomain: 0x60
[ 21.006110] ath: EEPROM indicates we should expect a direct regpair map
[ 21.006115] ath: Country alpha2 being used: 00
[ 21.006117] ath: Regpair used: 0x60
[ 21.027048] phy0: Selected rate control algorithm 'minstrel'
[ 21.031592] Registered led device: ath5k-phy0::rx
[ 21.031865] Registered led device: ath5k-phy0::tx
[ 21.031871] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 21.046561] hda_codec: ALC660-VD: BIOS auto-probing.
[ 21.345132] [drm] fb mappable at 0xD00C0000
[ 21.345137] [drm] vram apper at 0xD0000000
[ 21.345140] [drm] size 4096000
[ 21.345142] [drm] fb depth is 24
[ 21.345144] [drm] pitch is 5120
[ 21.756637] Console: switching to colour frame buffer device 160x50
[ 21.762873] fb0: radeondrmfb frame buffer device
[ 21.762875] drm: registered panic notifier
[ 21.764744] Slow work thread pool: Starting up
[ 21.764853] Slow work thread pool: Ready
[ 21.764867] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[ 22.014442] type=1400 audit(1288719946.243:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=941 comm="apparmor_parser"
[ 22.019557] type=1400 audit(1288719946.243:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=944 comm="apparmor_parser"
[ 22.022694] type=1400 audit(1288719946.253:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=942 comm="apparmor_parser"
[ 22.023041] type=1400 audit(1288719946.253:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=942 comm="apparmor_parser"
[ 22.023242] type=1400 audit(1288719946.253:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=942 comm="apparmor_parser"
[ 22.027377] type=1400 audit(1288719946.253:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=944 comm="apparmor_parser"
[ 22.030209] type=1400 audit(1288719946.263:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=944 comm="apparmor_parser"
[ 22.163786] ppdev: user-space parallel port driver
[ 22.170117] r8169 0000:06:00.0: eth0: link down
[ 22.171813] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.234823] ath5k phy0: gain calibration timeout (2412MHz)
[ 22.281569] ath5k phy0: gain calibration timeout (2412MHz)
[ 22.303341] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.551758] ath5k phy0: gain calibration timeout (2412MHz)
[ 22.641986] ath5k phy0: gain calibration timeout (2417MHz)
[ 22.731521] ath5k phy0: gain calibration timeout (2422MHz)
[ 22.821989] ath5k phy0: gain calibration timeout (2427MHz)
[ 22.911550] ath5k phy0: gain calibration timeout (2432MHz)
[ 23.011588] ath5k phy0: gain calibration timeout (2437MHz)
[ 23.101435] ath5k phy0: gain calibration timeout (2442MHz)
[ 23.191588] ath5k phy0: gain calibration timeout (2447MHz)
[ 23.648593] Bluetooth: L2CAP ver 2.14
[ 23.648598] Bluetooth: L2CAP socket layer initialized
[ 23.659461] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.659467] Bluetooth: BNEP filters: protocol multicast
[ 23.671512] Bluetooth: SCO (Voice Link) ver 0.6
[ 23.671517] Bluetooth: SCO socket layer initialized
[ 23.925542] Bluetooth: RFCOMM TTY layer initialized
[ 23.925552] Bluetooth: RFCOMM socket layer initialized
[ 23.925554] Bluetooth: RFCOMM ver 1.11
[ 26.609943] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 26.615377] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 28.220491] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 28.227768] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 42.918945] net_ratelimit: 7 callbacks suppressed
[ 42.918950] ath5k phy0: gain calibration timeout (2412MHz)
[ 42.998916] ath5k phy0: gain calibration timeout (2417MHz)
[ 43.078916] ath5k phy0: gain calibration timeout (2422MHz)
[ 43.158921] ath5k phy0: gain calibration timeout (2427MHz)
[ 43.238928] ath5k phy0: gain calibration timeout (2432MHz)
[ 43.318947] ath5k phy0: gain calibration timeout (2437MHz)
[ 43.398917] ath5k phy0: gain calibration timeout (2442MHz)
[ 43.478915] ath5k phy0: gain calibration timeout (2447MHz)
[ 43.559028] ath5k phy0: gain calibration timeout (2452MHz)
[ 43.638905] ath5k phy0: gain calibration timeout (2457MHz)
[ 73.221572] net_ratelimit: 5 callbacks suppressed
[ 73.221580] ath5k phy0: gain calibration timeout (2412MHz)
[ 73.611579] ath5k phy0: gain calibration timeout (2417MHz)
[ 74.001513] ath5k phy0: gain calibration timeout (2422MHz)
[ 74.391528] ath5k phy0: gain calibration timeout (2427MHz)
[ 74.781494] ath5k phy0: gain calibration timeout (2432MHz)
[ 75.171511] ath5k phy0: gain calibration timeout (2437MHz)
[ 75.569748] ath5k phy0: gain calibration timeout (2442MHz)
[ 75.951510] ath5k phy0: gain calibration timeout (2447MHz)
[ 76.341513] ath5k phy0: gain calibration timeout (2452MHz)
[ 76.731508] ath5k phy0: gain calibration timeout (2457MHz)
[ 78.861495] net_ratelimit: 4 callbacks suppressed
[ 78.861499] ath5k phy0: gain calibration timeout (2412MHz)
[ 113.233534] ath5k phy0: gain calibration timeout (2412MHz)
[ 113.621537] ath5k phy0: gain calibration timeout (2417MHz)
[ 114.001525] ath5k phy0: gain calibration timeout (2422MHz)
[ 114.381521] ath5k phy0: gain calibration timeout (2427MHz)
[ 114.761537] ath5k phy0: gain calibration timeout (2432MHz)
[ 115.141523] ath5k phy0: gain calibration timeout (2437MHz)
[ 115.521567] ath5k phy0: gain calibration timeout (2442MHz)
[ 115.901537] ath5k phy0: gain calibration timeout (2447MHz)
[ 116.281522] ath5k phy0: gain calibration timeout (2452MHz)
[ 118.313388] net_ratelimit: 4 callbacks suppressed
[ 118.313390] ath5k phy0: gain calibration timeout (2484MHz)
[ 118.763351] ath5k phy0: gain calibration timeout (2412MHz)
[ 163.233901] ath5k phy0: gain calibration timeout (2412MHz)
[ 163.621557] ath5k phy0: gain calibration timeout (2417MHz)
[ 164.004192] ath5k phy0: gain calibration timeout (2422MHz)
[ 164.391537] ath5k phy0: gain calibration timeout (2427MHz)
[ 164.779779] ath5k phy0: gain calibration timeout (2432MHz)
[ 165.161520] ath5k phy0: gain calibration timeout (2437MHz)
[ 165.541550] ath5k phy0: gain calibration timeout (2442MHz)
[ 165.921699] ath5k phy0: gain calibration timeout (2447MHz)
[ 166.301539] ath5k phy0: gain calibration timeout (2452MHz)
[ 166.689764] ath5k phy0: gain calibration timeout (2457MHz)
[ 168.814581] net_ratelimit: 4 callbacks suppressed
[ 168.814595] ath5k phy0: gain calibration timeout (2412MHz)
** Attachment added: "lshw-bad.txt"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/610440/+attachment/1722033/+files/lshw-bad.txt
--
ath5k phy0: gain calibration timeout after Kernel Upgrade
https://bugs.launchpad.net/bugs/610440
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.
More information about the kernel-bugs
mailing list