[Bug 138611] Re: Sky2 ethernet failing randomly with Marvell 88E8056 gigabit

[Tuoppi]

Some issues with Ubuntu 10.04 (64bit) on a Fujitsu-Siemens Lifebook
S7210. For some time after bootup the network just doesn't work,
apparently until the connection speed is reduced to 100Mbps.

lspci:
Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 14)

ethtool -i eth0:
driver: sky2
version: 1.25
firmware-version: N/A
bus-info: 0000:04:00.0

uname -r:
2.6.32-22-generic

dmesg:
(lots of lines like this)
[  965.596662] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[  966.029133] sky2 eth0: Link is down.
[  968.782951] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[  969.387122] sky2 eth0: Link is down.
[  971.949581] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[  972.999410] sky2 eth0: Link is down.
[  975.662757] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[  976.008737] sky2 eth0: Link is down.
[  988.121189] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both

-- 
Sky2 ethernet failing randomly with Marvell 88E8056 gigabit
https://bugs.launchpad.net/bugs/138611
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.