[Bug 45683] irda oops at boot
rokton
freeserif at yahoo.com
Fri May 19 22:58:23 UTC 2006
Public bug reported:
Binary package hint: linux-image-2.6.15-23-686
this did not happen with -22
[4294676.588000] irda_init()
[4294676.588000] NET: Registered protocol family 23
[4294676.715000] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[4294676.715000] printing eip:
[4294676.715000] c013c476
[4294676.715000] *pde = 00000000
[4294676.715000] Oops: 0002 [#1]
[4294676.715000] PREEMPT SMP
[4294676.715000] Modules linked in: irtty_sir sir_dev irda 8139cp 8139too mii crc_ccitt tsdev parport_pc parport floppy psmouse serio_raw snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc pcspkr rtc intel_agp agpgart sr_mod sg evdev cdrom ext3 jbd ide_generic ehci_hcd uhci_hcd usbcore sd_mod generic ata_piix libata scsi_mod thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor
[4294676.715000] CPU: 0
[4294676.715000] EIP: 0060:[<c013c476>] Not tainted VLI
[4294676.715000] EFLAGS: 00010092 (2.6.15-23-686)
[4294676.715000] EIP is at finish_wait+0x36/0x70
[4294676.715000] eax: 00000202 ebx: f7eddfd8 ecx: 00000000 edx: 00000000
[4294676.715000] esi: f7eddfcc edi: f89fe2a8 ebp: 00000000 esp: f7eddfb4
[4294676.715000] ds: 007b es: 007b ss: 0068
[4294676.715000] Process kIrDAd (pid: 3077, threadinfo=f7edc000 task=f7c1b030)
[4294676.715000] Stack: f7edc000 f7eddfcc 00000000 f89fab83 f89fbb20 00000000 00000000 f7c1b030
[4294676.715000] c011f0d0 00000000 00000000 f89faae0 00000000 c0101525 f7ec1f74 00000000
[4294676.715000] 00000000 00000000 00000000
[4294676.715000] Call Trace:
[4294676.715000] [<f89fab83>] irda_thread+0xa3/0xe0 [sir_dev]
[4294676.715000] [<c011f0d0>] default_wake_function+0x0/0x20
[4294676.715000] [<f89faae0>] irda_thread+0x0/0xe0 [sir_dev]
[4294676.715000] [<c0101525>] kernel_thread_helper+0x5/0x10
[4294676.715000] Code: 24 04 89 d6 89 7c 24 08 89 c7 b8 00 e0 ff ff 21 e0 8b 00 c7 00 00 00 00 00 3b 5a 0c 74 2f 89 f8 e8 f0 e8 1c 00 8b 53 04 8b 4e 0c <89> 51 04 89 0a 89 c2 89 f8 89 5e 0c 89 5b 04 8b 1c 24 8b 74 24
[4294676.715000] <6>note: kIrDAd[3077] exited with preempt_count 1
ksymoops says:
ksymoops 2.4.11 on i686 2.6.15-23-686. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.15-23-686/ (default)
-m /boot/System.map-2.6.15-23-686 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Unable to handle kernel NULL pointer dereference at virtual address 00000004
c013c476
*pde = 00000000
Oops: 0002 [#1]
CPU: 0
EIP: 0060:[<c013c476>] Not tainted VLI
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010092 (2.6.15-23-686)
eax: 00000202 ebx: f7eddfd8 ecx: 00000000 edx: 00000000
esi: f7eddfcc edi: f89fe2a8 ebp: 00000000 esp: f7eddfb4
ds: 007b es: 007b ss: 0068
Stack: f7edc000 f7eddfcc 00000000 f89fab83 f89fbb20 00000000 00000000 f7c1b030
c011f0d0 00000000 00000000 f89faae0 00000000 c0101525 f7ec1f74 00000000
00000000 00000000 00000000
Call Trace:
[<f89fab83>] irda_thread+0xa3/0xe0 [sir_dev]
[<c011f0d0>] default_wake_function+0x0/0x20
[<f89faae0>] irda_thread+0x0/0xe0 [sir_dev]
[<c0101525>] kernel_thread_helper+0x5/0x10
Code: 24 04 89 d6 89 7c 24 08 89 c7 b8 00 e0 ff ff 21 e0 8b 00 c7 00 00 00 00 00 3b 5a 0c 74 2f 89 f8
e8 f0 e8 1c 00 8b 53 04 8b 4e 0c <89> 51 04 89 0a 89 c2 89 f8 89 5e 0c 89 5b 04 8b 1c 24 8b 74 24
>>EIP; c013c476 <finish_wait+36/70> <=====
>>ebx; f7eddfd8 <pg0+37a88fd8/3fba9400>
>>esi; f7eddfcc <pg0+37a88fcc/3fba9400>
>>edi; f89fe2a8 <pg0+385a92a8/3fba9400>
>>esp; f7eddfb4 <pg0+37a88fb4/3fba9400>
Trace; f89fab83 <pg0+385a5b83/3fba9400>
Trace; c011f0d0 <default_wake_function+0/20>
Trace; f89faae0 <pg0+385a5ae0/3fba9400>
Trace; c0101525 <kernel_thread_helper+5/10>
This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.
Code; c013c44b <finish_wait+b/70>
00000000 <_EIP>:
Code; c013c44b <finish_wait+b/70>
0: 24 04 and $0x4,%al
Code; c013c44d <finish_wait+d/70>
2: 89 d6 mov %edx,%esi
Code; c013c44f <finish_wait+f/70>
4: 89 7c 24 08 mov %edi,0x8(%esp)
Code; c013c453 <finish_wait+13/70>
8: 89 c7 mov %eax,%edi
Code; c013c455 <finish_wait+15/70>
a: b8 00 e0 ff ff mov $0xffffe000,%eax
Code; c013c45a <finish_wait+1a/70>
f: 21 e0 and %esp,%eax
Code; c013c45c <finish_wait+1c/70>
11: 8b 00 mov (%eax),%eax
Code; c013c45e <finish_wait+1e/70>
13: c7 00 00 00 00 00 movl $0x0,(%eax)
Code; c013c464 <finish_wait+24/70>
19: 3b 5a 0c cmp 0xc(%edx),%ebx
Code; c013c467 <finish_wait+27/70>
1c: 74 2f je 4d <_EIP+0x4d>
Code; c013c469 <finish_wait+29/70>
1e: 89 f8 mov %edi,%eax
Code; c013c46b <finish_wait+2b/70>
20: e8 f0 e8 1c 00 call 1ce915 <_EIP+0x1ce915>
Code; c013c470 <finish_wait+30/70>
25: 8b 53 04 mov 0x4(%ebx),%edx
Code; c013c473 <finish_wait+33/70>
28: 8b 4e 0c mov 0xc(%esi),%ecx
This decode from eip onwards should be reliable
Code; c013c476 <finish_wait+36/70>
00000000 <_EIP>:
Code; c013c476 <finish_wait+36/70> <=====
0: 89 51 04 mov %edx,0x4(%ecx) <=====
Code; c013c479 <finish_wait+39/70>
3: 89 0a mov %ecx,(%edx)
Code; c013c47b <finish_wait+3b/70>
5: 89 c2 mov %eax,%edx
Code; c013c47d <finish_wait+3d/70>
7: 89 f8 mov %edi,%eax
Code; c013c47f <finish_wait+3f/70>
9: 89 5e 0c mov %ebx,0xc(%esi)
Code; c013c482 <finish_wait+42/70>
c: 89 5b 04 mov %ebx,0x4(%ebx)
Code; c013c485 <finish_wait+45/70>
f: 8b 1c 24 mov (%esp),%ebx
Code; c013c488 <finish_wait+48/70>
12: 8b .byte 0x8b
Code; c013c489 <finish_wait+49/70>
13: 74 24 je 39 <_EIP+0x39>
1 warning and 1 error issued. Results may not be reliable.
hardware:
[4294667.296000] Linux version 2.6.15-23-686 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubu
ntu5)) #1 SMP PREEMPT Thu May 18 17:31:41 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
[4294667.296000] BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[4294667.296000] 119MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f4d70
[4294667.296000] On node 0 totalpages: 260080
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 30704 pages, LIFO batch:7
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 IntelR ) @ 0x000f8ed0
[4294667.296000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f7f3040
[4294667.296000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f7f30c0
[4294667.296000] ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f7f7740
[4294667.296000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f7f7640
[4294667.296000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x408
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:4 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[4294667.296000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 40000000 (gap: 3f800000:a0800000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/sda3 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 2670.576 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294667.414000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.415000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.442000] Memory: 1019052k/1040320k available (2095k kernel code, 20492k reserved, 591k data,
332k init, 122816k highmem)
[4294667.442000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.502000] Calibrating delay using timer specific routine.. 5343.36 BogoMIPS (lpj=2671681)
[4294667.502000] Security Framework v1.0.0 initialized
[4294667.502000] SELinux: Disabled at boot.
[4294667.502000] Mount-cache hash table entries: 512
[4294667.502000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 0000
0000 00000001
[4294667.502000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000
000 00000001
[4294667.502000] monitor/mwait feature present.
[4294667.502000] using mwait in idle threads.
[4294667.502000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[4294667.502000] CPU: L2 cache: 256K
[4294667.502000] CPU: Hyper-Threading is disabled
[4294667.502000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000651d 00000000 00
000001
[4294667.502000] mtrr: v2.0 (20020519)
[4294667.502000] Enabling fast FPU save and restore... done.
[4294667.502000] Enabling unmasked SIMD FPU exception support... done.
[4294667.502000] Checking 'hlt' instruction... OK.
[4294667.506000] SMP alternatives: switching to UP code
[4294667.506000] checking if image is initramfs... it is
[4294668.061000] Freeing initrd memory: 6777k freed
[4294668.072000] ACPI: Looking for DSDT ... not found!
[4294668.177000] CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 09
[4294668.177000] Total of 1 processors activated (5343.36 BogoMIPS).
[4294668.177000] ENABLING IO-APIC IRQs
[4294668.177000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294668.288000] Brought up 1 CPUs
[4294668.288000] NET: Registered protocol family 16
[4294668.288000] EISA bus registered
[4294668.288000] ACPI: bus type pci registered
[4294668.301000] PCI: PCI BIOS revision 3.00 entry at 0xfb170, last bus=1
[4294668.301000] PCI: Using MMCONFIG
[4294668.301000] ACPI: Subsystem revision 20051216
[4294668.311000] ACPI: Interpreter enabled
[4294668.311000] ACPI: Using IOAPIC for interrupt routing
[4294668.312000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.312000] PCI: Probing PCI hardware (bus 00)
[4294668.314000] Boot video device is 0000:00:02.0
[4294668.315000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[4294668.315000] PCI: Transparent bridge - 0000:00:1e.0
[4294668.315000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.329000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[4294668.334000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[4294668.335000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294668.335000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[4294668.335000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294668.336000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294668.336000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294668.336000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294668.337000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[4294668.337000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.337000] pnp: PnP ACPI init
[4294668.342000] pnp: PnP ACPI: found 15 devices
[4294668.342000] PnPBIOS: Disabled by ACPI PNP
[4294668.342000] PCI: Using ACPI for IRQ routing
[4294668.342000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294668.354000] pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved
[4294668.355000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294668.355000] PCI: Bridge: 0000:00:1e.0
[4294668.355000] IO window: d000-dfff
[4294668.355000] MEM window: d0000000-d00fffff
[4294668.355000] PREFETCH window: 40000000-400fffff
[4294668.355000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294668.356000] audit: initializing netlink socket (disabled)
[4294668.356000] audit(1148085224.354:1): initialized
[4294668.356000] highmem bounce pool size: 64 pages
[4294668.356000] VFS: Disk quotas dquot_6.5.1
[4294668.356000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.356000] Initializing Cryptographic API
[4294668.356000] io scheduler noop registered
[4294668.356000] io scheduler anticipatory registered
[4294668.356000] io scheduler deadline registered
[4294668.356000] io scheduler cfq registered
[4294668.356000] isapnp: Scanning for PnP cards...
[4294668.711000] isapnp: No Plug & Play device found
[4294668.739000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294668.750000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.750000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.750000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294668.751000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.751000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.754000] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.755000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294668.755000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294668.755000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294668.756000] mice: PS/2 mouse device common for all mice
[4294668.757000] EISA: Probing bus 0 at eisa.0
[4294668.757000] EISA: Detected 0 cards.
[4294668.758000] NET: Registered protocol family 2
[4294668.841000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294668.841000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[4294668.842000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[4294668.842000] TCP: Hash tables configured (established 131072 bind 65536)
[4294668.842000] TCP reno registered
[4294668.842000] TCP bic registered
[4294668.842000] NET: Registered protocol family 1
[4294668.843000] NET: Registered protocol family 8
[4294668.843000] NET: Registered protocol family 20
[4294668.843000] Using IPI No-Shortcut mode
[4294668.843000] ACPI wakeup devices:
[4294668.843000] PCI0 PEX0 PEX1 PEX2 PEX3 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE AC97 AZAL
[4294668.843000] ACPI: (supports S0 S1 S3 S4 S5)
[4294668.843000] Freeing unused kernel memory: 332k freed
[4294668.894000] vga16fb: initializing
[4294668.894000] vga16fb: mapped to 0xc00a0000
[4294669.007000] Console: switching to colour frame buffer device 80x25
[4294669.007000] fb0: VGA16 VGA frame buffer device
[4294669.020000] Capability LSM initialized
[4294669.058000] ACPI: Fan [FAN] (on)
[4294669.064000] ACPI: Thermal Zone [THRM] (38 C)
[4294669.448000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294669.868000] SCSI subsystem initialized
[4294669.870000] ACPI: bus type scsi registered
[4294669.870000] libata version 1.20 loaded.
[4294669.872000] ata_piix 0000:00:1f.2: version 1.05
[4294669.872000] ata_pci_init_one: pci_dev class+intf: 0x10180
[4294669.872000] ata_pci_init_one: NO_LEGACY == 0
[4294669.872000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 169
[4294669.872000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294669.872000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
[4294670.046000] ata1: dev 0 cfg 00:0040 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:2
0ff 93:0000
[4294670.046000] ata1: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
[4294670.046000] ata_acpi_push_id: skipping for PATA mode
[4294670.046000] ata1: dev 0 configured for UDMA/133
[4294670.046000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.046000] pata_get_dev_handle: dev_handle: 0xdffe6420, parent_handle: 0xc1a12fa0
[4294670.046000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff57e00, *handle=0xdff
e6420
[4294670.046000] do_drive_get_GTF: drive w/ adr=0: v: 0xdffe6fc0
[4294670.047000] scsi0 : ata_piix
[4294670.047000] Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
[4294670.047000] Type: Direct-Access ANSI SCSI revision: 05
[4294670.047000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.048000] pata_get_dev_handle: dev_handle: 0xdffe6420, parent_handle: 0xc1a12fa0
[4294670.048000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff57e00, *handle=0xdff
e6420
[4294670.048000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
[4294670.356000] ata2: dev 0 cfg 00:85c0 49:0f00 82:421c 83:0000 84:0000 85:0000 86:0000 87:0000 88:0
407 93:604f
[4294670.356000] ata2: dev 0 ATAPI, max UDMA/33
[4294670.356000] ata2(0): applying bridge limits
[4294670.356000] ata_acpi_push_id: skipping for PATA mode
[4294670.357000] ata2: dev 0 configured for UDMA/33
[4294670.357000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.357000] pata_get_dev_handle: dev_handle: 0xdffe6420, parent_handle: 0xc1a12fa0
[4294670.357000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff57e00, *handle=0xdff
e6420
[4294670.357000] do_drive_get_GTF: drive w/ adr=0: v: 0xdffe6e40
[4294670.359000] scsi1 : ata_piix
[4294670.364000] Vendor: HL-DT-ST Model: DVDRAM GSA-4167B Rev: DL11
[4294670.364000] Type: CD-ROM ANSI SCSI revision: 05
[4294670.364000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.364000] pata_get_dev_handle: dev_handle: 0xdffe6420, parent_handle: 0xc1a12fa0
[4294670.364000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff57e00, *handle=0xdff
e6420
[4294670.376000] Driver 'sd' needs updating - please use bus_type methods
[4294670.394000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[4294670.394000] SCSI device sda: drive cache: write back
[4294670.398000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[4294670.398000] SCSI device sda: drive cache: write back
[4294670.398000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[4294670.444000] sd 0:0:0:0: Attached scsi disk sda
[4294670.721000] usbcore: registered new driver usbfs
[4294670.721000] usbcore: registered new driver hub
[4294670.722000] USB Universal Host Controller Interface driver v2.3
[4294670.722000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 177
[4294670.722000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294670.722000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294670.722000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294670.723000] uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000e000
[4294670.723000] hub 1-0:1.0: USB hub found
[4294670.723000] hub 1-0:1.0: 2 ports detected
[4294670.825000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 169
[4294670.825000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294670.825000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294670.825000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294670.825000] uhci_hcd 0000:00:1d.1: irq 169, io base 0x0000e100
[4294670.825000] hub 2-0:1.0: USB hub found
[4294670.825000] hub 2-0:1.0: 2 ports detected
[4294670.927000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294670.927000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294670.927000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294670.927000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294670.927000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000e200
[4294670.927000] hub 3-0:1.0: USB hub found
[4294670.927000] hub 3-0:1.0: 2 ports detected
[4294671.029000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 193
[4294671.029000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294671.029000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294671.029000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294671.029000] uhci_hcd 0000:00:1d.3: irq 193, io base 0x0000e300
[4294671.029000] hub 4-0:1.0: USB hub found
[4294671.029000] hub 4-0:1.0: 2 ports detected
[4294671.134000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 177
[4294671.134000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294671.134000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294671.134000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294671.135000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294671.135000] ehci_hcd 0000:00:1d.7: irq 177, io mem 0xd01c4000
[4294671.139000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294671.139000] hub 5-0:1.0: USB hub found
[4294671.139000] hub 5-0:1.0: 8 ports detected
[4294671.258000] ide0: I/O resource 0x1F0-0x1F7 not free.
[4294671.258000] ide0: ports already in use, skipping probe
[4294671.258000] ide1: I/O resource 0x170-0x177 not free.
[4294671.258000] ide1: ports already in use, skipping probe
[4294671.302000] Attempting manual resume
[4294671.321000] kjournald starting. Commit interval 5 seconds
[4294671.321000] EXT3-fs: mounted filesystem with ordered data mode.
[4294674.660000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294674.660000] 1:0:0:0: Attached scsi generic sg1 type 5
[4294674.719000] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[4294674.719000] Uniform CD-ROM driver Revision: 3.20
[4294674.719000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294675.350000] Linux agpgart interface v0.101 (c) Dave Jones
[4294675.352000] agpgart: Detected an Intel 915G Chipset.
[4294675.352000] agpgart: Detected 7932K stolen memory.
[4294675.369000] agpgart: AGP aperture is 256M @ 0xc0000000
[4294675.491000] hw_random: RNG not detected
[4294675.623000] Real Time Clock Driver v1.12
[4294675.675000] input: PC Speaker as /class/input/input1
[4294675.866000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 193
[4294675.866000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4294676.091000] Floppy drive(s): fd0 is 1.44M
[4294676.107000] FDC 0 is a post-1991 82077
[4294676.225000] input: GenPS/2 Genius <NULL> as /class/input/input2
[4294676.342000] parport: PnPBIOS parport detected.
[4294676.342000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[4294676.398000] ts: Compaq touchscreen protocol output
[4294676.487000] 8139too Fast Ethernet driver 0.9.27
[4294676.487000] ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 18 (level, low) -> IRQ 185
[4294676.487000] eth0: RealTek RTL8139 at 0xf895c000, 00:04:61:a9:6c:2a, IRQ 185
[4294676.487000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294676.544000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294676.588000] irda_init()
[4294676.588000] NET: Registered protocol family 23
[4294676.715000] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[4294676.715000] printing eip:
[4294676.715000] c013c476
[4294676.715000] *pde = 00000000
[4294676.715000] Oops: 0002 [#1]
[4294676.715000] PREEMPT SMP
[4294676.715000] Modules linked in: irtty_sir sir_dev irda 8139cp 8139too mii crc_ccitt tsdev parport
_pc parport floppy psmouse serio_raw snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm sn
d_timer snd soundcore snd_page_alloc pcspkr rtc intel_agp agpgart sr_mod sg evdev cdrom ext3 jbd ide_
generic ehci_hcd uhci_hcd usbcore sd_mod generic ata_piix libata scsi_mod thermal processor fan capab
ility commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor
[4294676.715000] CPU: 0
[4294676.715000] EIP: 0060:[<c013c476>] Not tainted VLI
[4294676.715000] EFLAGS: 00010092 (2.6.15-23-686)
[4294676.715000] EIP is at finish_wait+0x36/0x70
[4294676.715000] eax: 00000202 ebx: f7eddfd8 ecx: 00000000 edx: 00000000
[4294676.715000] esi: f7eddfcc edi: f89fe2a8 ebp: 00000000 esp: f7eddfb4
[4294676.715000] ds: 007b es: 007b ss: 0068
[4294676.715000] Process kIrDAd (pid: 3077, threadinfo=f7edc000 task=f7c1b030)
[4294676.715000] Stack: f7edc000 f7eddfcc 00000000 f89fab83 f89fbb20 00000000 00000000 f7c1b030
[4294676.715000] c011f0d0 00000000 00000000 f89faae0 00000000 c0101525 f7ec1f74 00000000
[4294676.715000] 00000000 00000000 00000000
[4294676.715000] Call Trace:
[4294676.715000] [<f89fab83>] irda_thread+0xa3/0xe0 [sir_dev]
[4294676.715000] [<c011f0d0>] default_wake_function+0x0/0x20
[4294676.715000] [<f89faae0>] irda_thread+0x0/0xe0 [sir_dev]
[4294676.715000] [<c0101525>] kernel_thread_helper+0x5/0x10
[4294676.715000] Code: 24 04 89 d6 89 7c 24 08 89 c7 b8 00 e0 ff ff 21 e0 8b 00 c7 00 00 00 00 00 3b
5a 0c 74 2f 89 f8 e8 f0 e8 1c 00 8b 53 04 8b 4e 0c <89> 51 04 89 0a 89 c2 89 f8 89 5e 0c 89 5b 04 8b
1c 24 8b 74 24
[4294676.715000] <6>note: kIrDAd[3077] exited with preempt_count 1
[4294677.751000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294677.785000] lp0: using parport0 (interrupt-driven).
[4294677.917000] Adding 2249092k swap on /dev/sda2. Priority:-1 extents:1 across:2249092k
[4294678.968000] NET: Registered protocol family 17
[4294681.904000] NET: Registered protocol family 10
[4294681.911000] lo: Disabled Privacy Extensions
[4294681.918000] IPv6 over IPv4 tunneling driver
[4294692.322000] eth0: no IPv6 routers present
[4294702.384000] EXT3 FS on sda3, internal journal
[4294702.559000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294702.566000] md: bitmap version 4.39
[4294703.007000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[4294708.458000] cdrom: open failed.
[4294827.048000] kjournald starting. Commit interval 5 seconds
[4294827.054000] EXT3 FS on sda6, internal journal
[4294827.061000] EXT3-fs: mounted filesystem with ordered data mode.
[4294827.149000] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[4294827.737000] ReiserFS: sda5: using ordered data mode
[4294827.744000] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max
trans len 1024, max batch 900, max commit age 30, max trans age 30
0000:00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller (rev 0e)
0000:00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller (rev 0e)
0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
0000:00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
0000:01:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
description: Desktop Computer
width: 32 bits
capabilities: smbios-2.2 dmi-2.2
configuration: boot=normal chassis=desktop
*-core
description: Motherboard
product: i915GL DDR: 5EGMI
vendor: EPoX COMPUTER CO.,LTD
physical id: 0
version: 1.x
*-firmware
description: BIOS
vendor: Phoenix Technologies, LTD
physical id: 0
version: 6.00 PG (07/28/2005)
size: 128KB
capacity: 448KB
capabilities: isa pci pnp apm upgrade shadowing cdboot bootselect socketedrom edd int13flop
py360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17pr
inter int10video acpi usb ls120boot zipboot
*-cpu
description: CPU
product: Intel(R) Celeron(R) CPU 2.66GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu at 0
version: 15.4.9
serial: 0000-0F49-0000-0000-0000-0000
slot: Socket 775
size: 2666MHz
capacity: 3066MHz
width: 64 bits
clock: 133MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmo
v pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 pni monitor ds_cpl tm2 cid cx16
xtpr lahf_lm
configuration: id=0
*-cache:0
description: L1 cache
physical id: a
slot: Internal Cache
size: 32KB
capacity: 32KB
capabilities: synchronous internal write-back
*-cache:1
description: L2 cache
physical id: b
slot: External Cache
size: 256KB
capacity: 256KB
capabilities: synchronous external write-back
*-memory
description: System Memory
physical id: 1b
slot: System board or motherboard
size: 1GB
*-bank:0
description: DIMM SDRAM Synchronous
physical id: 0
slot: A0
size: 512MB
width: 64 bits
*-bank:1
description: DIMM [empty]
physical id: 1
slot: A1
*-bank:2
description: DIMM SDRAM Synchronous
physical id: 2
slot: A2
size: 512MB
width: 64 bits
*-bank:3
description: DIMM [empty]
physical id: 3
slot: A3
*-pci
description: Host bridge
product: 915G/P/GV/GL/PL/910GL Processor to I/O Controller
vendor: Intel Corporation
physical id: 100
bus info: pci at 00:00.0
version: 0e
width: 32 bits
clock: 33MHz
*-display
description: VGA compatible controller
product: 82915G/GV/910GL Express Chipset Family Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci at 00:02.0
version: 0e
size: 256MB
width: 32 bits
clock: 33MHz
capabilities: vga bus_master cap_list
resources: iomemory:d0100000-d017ffff ioport:e400-e407 iomemory:c0000000-cfffffff iomemo
ry:d0180000-d01bffff irq:193
*-multimedia
description: Multimedia controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci at 00:1b.0
version: 03
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=HDA Intel
resources: iomemory:d01c0000-d01c3fff irq:193
*-usb:0
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
vendor: Intel Corporation
physical id: 1d
bus info: pci at 00:1d.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:e000-e01f irq:177
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.15-23-686 uhci_hcd
physical id: 1
bus info: usb at 1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:1
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci at 00:1d.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:e100-e11f irq:169
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.15-23-686 uhci_hcd
physical id: 1
bus info: usb at 2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:2
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci at 00:1d.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:e200-e21f irq:185
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.15-23-686 uhci_hcd
physical id: 1
bus info: usb at 3
logical name: usb3
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:3
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci at 00:1d.3
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:e300-e31f irq:193
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.15-23-686 uhci_hcd
physical id: 1
bus info: usb at 4
logical name: usb4
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:4
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci at 00:1d.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci_hcd
resources: iomemory:d01c4000-d01c43ff irq:177
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.15-23-686 ehci_hcd
physical id: 1
bus info: usb at 5
logical name: usb5
version: 2.06
capabilities: usb-2.00
configuration: driver=hub maxpower=0mA slots=8 speed=480.0MB/s
*-pci
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci at 00:1e.0
version: d3
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 2
bus info: pci at 01:02.0
logical name: eth0
version: 10
serial: 00:04:61:a9:6c:2a
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-f
d autonegociation
configuration: autonegociation=on broadcast=yes driver=8139too driverversion=0.9.27 d
uplex=full ip=10.51.42.12 link=yes multicast=yes port=MII speed=100MB/s
resources: ioport:d000-d0ff iomemory:d0010000-d00100ff irq:185
*-isa UNCLAIMED
description: ISA bridge
product: 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci at 00:1f.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
*-ide
description: IDE interface
product: 82801FB/FW (ICH6/ICH6W) SATA Controller
vendor: Intel Corporation
physical id: 1f.2
bus info: pci at 00:1f.2
logical name: scsi0
logical name: scsi1
version: 03
width: 32 bits
clock: 66MHz
capabilities: ide bus_master cap_list emulated scsi-host
configuration: driver=ata_piix
resources: ioport:f000-f00f irq:169
*-disk
description: SCSI Disk
product: SAMSUNG HD160JJ
vendor: ATA
physical id: 0
bus info: scsi at 0:0.0.0
logical name: /dev/sda
version: ZM10
serial: S08HJ1JL218279
size: 149GB
capabilities: partitioned partitioned:dos
configuration: ansiversion=5
*-volume:0
description: HPFS/NTFS partition
physical id: 1
bus info: scsi at 0:0.0.0,1
logical name: /dev/sda1
capacity: 8189MB
capabilities: primary bootable
*-volume:1
description: Linux swap / Solaris partition
physical id: 2
bus info: scsi at 0:0.0.0,2
logical name: /dev/sda2
capacity: 2196MB
capabilities: primary nofs
*-volume:2
description: Linux filesystem partition
physical id: 3
bus info: scsi at 0:0.0.0,3
logical name: /dev/sda3
capacity: 7632MB
capabilities: primary
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi at 0:0.0.0,4
logical name: /dev/sda4
capacity: 131GB
capabilities: extended partitioned partitioned:extended
*-cdrom
description: DVD-RAM writer
product: DVDRAM GSA-4167B
vendor: HL-DT-ST
physical id: 1
bus info: scsi at 1:0.0.0
logical name: /dev/cdrom
*-serial UNCLAIMED
description: SMBus
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci at 00:1f.3
version: 03
width: 32 bits
clock: 33MHz
resources: ioport:500-51f irq:11
** Affects: linux-source-2.6.15 (Ubuntu)
Severity: Normal
Priority: (none set)
Status: Unconfirmed
--
irda oops at boot
https://launchpad.net/bugs/45683
More information about the kernel-bugs
mailing list