[Bug 54273] Re: USB device not accepting address: error -110

Thu Dec 28 05:22:27 UTC 2006

Confirming as well. I believe it is a problem with the BIOS in my case
as I cannot mount 2 different USB devices in WinXP (Dual boot, no I
never really use XP) and these work fine on my other Edgy system. One is
a 80GB hard drive usb and the other is a ATI remote wonder. WinXP sees
them right off the bat and says they are 'MALFUNTIONING' and to replace
them. The device name usually pops up, doesn't get the name though....

System is GigaByte GA-M55plus-S3G (F6 BIOS)
Athlon 64x2 4200+ (32bit Edgy)
Integrated Geforce6100
NForce 430

I believe the 6100/430 part is the important one as my 'google' research
shows this problem all over with 6100/6150 on ASUS boards as well.

Things I tried:
modprobe -r ehci_usb
Change usb 2.0 to 1.1 in bios (Changed error messages)

Found F7 BIOS update (12/21/06 release)

Booting with the irqpoll noapic nolapic acpi=off options (In various
combos and created a keyboard that doubles everything i type.

Before the changes I get:

[   85.867469] ohci_hcd 0000:00:0b.0: wakeup
[   86.251175] usb 2-1: new full speed USB device using ohci_hcd and address 2
[   86.435057] usb 2-1: device descriptor read/64, error -110
[   86.722452] usb 2-1: device descriptor read/64, error -110
[   87.002272] usb 2-1: new full speed USB device using ohci_hcd and address 3
[   87.186153] usb 2-1: device descriptor read/64, error -110
[   87.473969] usb 2-1: device descriptor read/64, error -110
[   87.753792] usb 2-1: new full speed USB device using ohci_hcd and address 4
[   88.169514] usb 2-1: device not accepting address 4, error -110
[   88.345406] usb 2-1: new full speed USB device using ohci_hcd and address 5
[   88.761134] usb 2-1: device not accepting address 5, error -110
[  136.218973] usb 2-7: new full speed USB device using ohci_hcd and address 6
[  136.402352] usb 2-7: device descriptor read/64, error -110
[  136.690166] usb 2-7: device descriptor read/64, error -110
[  136.969985] usb 2-7: new full speed USB device using ohci_hcd and address 7
[  137.153870] usb 2-7: device descriptor read/64, error -110
[  137.441683] usb 2-7: device descriptor read/64, error -110
[  137.721499] usb 2-7: new full speed USB device using ohci_hcd and address 8
[  138.137226] usb 2-7: device not accepting address 8, error -110
[  138.313118] usb 2-7: new full speed USB device using ohci_hcd and address 9
[  138.728844] usb 2-7: device not accepting address 9, error -110
[  139.032652] usb 2-8: new full speed USB device using ohci_hcd and address 10
[  139.216537] usb 2-8: device descriptor read/64, error -110
[  139.504347] usb 2-8: device descriptor read/64, error -110
[  139.784166] usb 2-8: new full speed USB device using ohci_hcd and address 11
[  139.968048] usb 2-8: device descriptor read/64, error -110
[  140.255861] usb 2-8: device descriptor read/64, error -110
[  140.535682] usb 2-8: new full speed USB device using ohci_hcd and address 12
[  140.951408] usb 2-8: device not accepting address 12, error -110
[  141.127300] usb 2-8: new full speed USB device using ohci_hcd and address 13
[  141.543040] usb 2-8: device not accepting address 13, error -110

After update:

[17180154.220000] ohci_hcd 0000:00:0b.0: wakeup
[17180188.396000] ohci_hcd 0000:00:0b.0: wakeup
[17180188.780000] usb 1-8: new low speed USB device using ohci_hcd and address 2
[17180188.964000] usb 1-8: device descriptor read/64, error -110
[17180189.636000] ohci_hcd 0000:00:0b.0: wakeup
[17180191.636000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180193.556000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180194.608000] ohci_hcd 0000:00:0b.0: wakeup
[17180196.972000] ohci_hcd 0000:00:0b.0: wakeup
[17180197.360000] ohci_hcd 0000:00:0b.0: wakeup
[17180198.160000] ohci_hcd 0000:00:0b.0: wakeup
[17180199.408000] ohci_hcd 0000:00:0b.0: wakeup
[17180206.952000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180208.872000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180210.792000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180212.748000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180214.668000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180216.588000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180218.508000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180222.072000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180224.088000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180227.096000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180229.128000] hub 1-0:1.0: connect-debounce failed, port 8 disabled
[17180232.112000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180233.304000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180234.496000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180237.868000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180239.060000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180240.252000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180241.444000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180241.748000] usb 1-8: new low speed USB device using ohci_hcd and address 12
[17180241.932000] usb 1-8: device descriptor read/64, error -110
[17180242.220000] usb 1-8: device descriptor read/64, error -110
[17180242.500000] usb 1-8: new low speed USB device using ohci_hcd and address 13
[17180242.684000] usb 1-8: device descriptor read/64, error -110
[17180242.972000] usb 1-8: device descriptor read/64, error -110
[17180244.268000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180245.460000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180245.860000] usb 1-8: new low speed USB device using ohci_hcd and address 16
[17180246.044000] usb 1-8: device descriptor read/64, error -110
[17180246.332000] usb 1-8: device descriptor read/64, error -110
[17180247.628000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180248.772000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180249.964000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180250.268000] usb 1-8: new low speed USB device using ohci_hcd and address 20
[17180250.452000] usb 1-8: device descriptor read/64, error -110
[17180250.740000] usb 1-8: device descriptor read/64, error -110
[17180251.020000] usb 1-8: new low speed USB device using ohci_hcd and address 21
[17180251.204000] usb 1-8: device descriptor read/64, error -110
[17180251.492000] usb 1-8: device descriptor read/64, error -110
[17180251.772000] usb 1-8: new low speed USB device using ohci_hcd and address 22
[17180252.180000] usb 1-8: device not accepting address 22, error -110
[17180252.356000] usb 1-8: new low speed USB device using ohci_hcd and address 23
[17180252.764000] usb 1-8: device not accepting address 23, error -110
[17180253.468000] usb 1-8: new low speed USB device using ohci_hcd and address 24
[17180253.652000] usb 1-8: device descriptor read/64, error -110
[17180253.940000] usb 1-8: device descriptor read/64, error -110
[17180255.236000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180256.428000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180257.620000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180257.924000] usb 1-8: new low speed USB device using ohci_hcd and address 28
[17180258.104000] usb 1-8: device descriptor read/64, error -110
[17180258.388000] usb 1-8: device descriptor read/64, error -110
[17180258.668000] usb 1-8: new low speed USB device using ohci_hcd and address 29
[17180258.848000] usb 1-8: device descriptor read/64, error -110
[17180259.132000] usb 1-8: device descriptor read/64, error -110
[17180259.412000] usb 1-8: new low speed USB device using ohci_hcd and address 30
[17180259.820000] usb 1-8: device not accepting address 30, error -110
[17180259.996000] usb 1-8: new low speed USB device using ohci_hcd and address 31
[17180260.404000] usb 1-8: device not accepting address 31, error -110
[17180260.708000] usb 1-8: new low speed USB device using ohci_hcd and address 32
[17180260.888000] usb 1-8: device descriptor read/64, error -110
[17180261.172000] usb 1-8: device descriptor read/64, error -110
[17180261.452000] usb 1-8: new low speed USB device using ohci_hcd and address 33
[17180261.632000] usb 1-8: device descriptor read/64, error -110
[17180261.916000] usb 1-8: device descriptor read/64, error -110
[17180262.196000] usb 1-8: new low speed USB device using ohci_hcd and address 34
[17180262.604000] usb 1-8: device not accepting address 34, error -110
[17180262.780000] usb 1-8: new low speed USB device using ohci_hcd and address 35
[17180263.188000] usb 1-8: device not accepting address 35, error -110
[17180263.800000] usb 1-8: new low speed USB device using ohci_hcd and address 36
[17180263.980000] usb 1-8: device descriptor read/64, error -110
[17180264.264000] usb 1-8: device descriptor read/64, error -110
[17180264.544000] usb 1-8: new low speed USB device using ohci_hcd and address 37
[17180264.724000] usb 1-8: device descriptor read/64, error -110
[17180265.008000] usb 1-8: device descriptor read/64, error -110
[17180265.288000] usb 1-8: new low speed USB device using ohci_hcd and address 38
[17180265.696000] usb 1-8: device not accepting address 38, error -110
[17180265.872000] usb 1-8: new low speed USB device using ohci_hcd and address 39
[17180266.280000] usb 1-8: device not accepting address 39, error -110
[17180266.680000] usb 1-8: new low speed USB device using ohci_hcd and address 40
[17180266.860000] usb 1-8: device descriptor read/64, error -110
[17180267.144000] usb 1-8: device descriptor read/64, error -110
[17180267.424000] usb 1-8: new low speed USB device using ohci_hcd and address 41
[17180267.604000] usb 1-8: device descriptor read/64, error -110
[17180267.888000] usb 1-8: device descriptor read/64, error -110
[17180268.168000] usb 1-8: new low speed USB device using ohci_hcd and address 42
[17180268.576000] usb 1-8: device not accepting address 42, error -110
[17180268.752000] usb 1-8: new low speed USB device using ohci_hcd and address 43
[17180269.160000] usb 1-8: device not accepting address 43, error -110
[17180279.932000] usb 1-8: new low speed USB device using ohci_hcd and address 44
[17180280.116000] usb 1-8: device descriptor read/64, error -110
[17180280.404000] usb 1-8: device descriptor read/64, error -110
[17180280.684000] usb 1-8: new low speed USB device using ohci_hcd and address 45
[17180280.868000] usb 1-8: device descriptor read/64, error -110
[17180281.156000] usb 1-8: device descriptor read/64, error -110
[17180281.436000] usb 1-8: new low speed USB device using ohci_hcd and address 46
[17180281.852000] usb 1-8: device not accepting address 46, error -110
[17180283.044000] hub 1-0:1.0: Cannot enable port 8.  Maybe the USB cable is bad?
[17180283.348000] usb 1-8: new low speed USB device using ohci_hcd and address 48
[17180283.532000] usb 1-8: device descriptor read/64, error -110
[17180283.820000] usb 1-8: device descriptor read/64, error -110
[17180284.100000] usb 1-8: new low speed USB device using ohci_hcd and address 49
[17180284.284000] usb 1-8: device descriptor read/64, error -110
[17180284.572000] usb 1-8: device descriptor read/64, error -110
[17180284.852000] usb 1-8: new low speed USB device using ohci_hcd and address 50
[17180285.268000] usb 1-8: device not accepting address 50, error -110
[17180285.444000] usb 1-8: new low speed USB device using ohci_hcd and address 51
[17180285.860000] usb 1-8: device not accepting address 51, error -110
[17180330.028000] hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
[17180639.548000] hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)

-- 
USB device not accepting address: error -110
https://launchpad.net/bugs/54273