[Bug 38824] Hotplug load wrong prism isl driver

[Pekka Ojanperä]

Public bug reported:

Affects: linux-source-2.6.15 (Ubuntu)
       Severity: Normal
       Priority: (none set)
         Status: Rejected


Description:
This broblem comes with kernel 2.6.15-20-386. This works with kernel 2.6.15-19-386.
wlan device in my laptop is pcmcia card. ZyXEL G-100. lspci tells that it's with Prism card and type is ISL3890.
0000:03:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism GT/Prism Duette] (rev 01)

When I install this card hotplug tryes to load isl3886 firmware.
[4374207.453000] pccard: CardBus card inserted into slot 0
[4374207.453000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[4374207.453000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[4374208.288000] islusb: Request firmware for 'isl3886' failed: -2
[4374208.288000] eth1: could not upload firmware ('isl3886')
[4374208.288000] eth1: islpci_reset: failure
[4374208.338000] islusb: unable to boot device
[4374208.392000] islusb: Request firmware for 'isl3886' failed: -2
[4374208.392000] eth1: could not upload firmware ('isl3886')
[4374208.392000] eth1: islpci_reset: failure
Public bug reported:

Affects: linux-source-2.6.15 (Ubuntu)
       Severity: Normal
       Priority: (none set)
         Status: Rejected


Description:
This broblem comes with kernel 2.6.15-20-386. This works with kernel 2.6.15-19-386.
wlan device in my laptop is pcmcia card. ZyXEL G-100. lspci tells that it's with Prism card and type is ISL3890.
0000:03:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism GT/Prism Duette] (rev 01)

When I install this card hotplug tryes to load isl3886 firmware.
[4374207.453000] pccard: CardBus card inserted into slot 0
[4374207.453000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[4374207.453000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[4374208.288000] islusb: Request firmware for 'isl3886' failed: -2
[4374208.288000] eth1: could not upload firmware ('isl3886')
[4374208.288000] eth1: islpci_reset: failure
[4374208.338000] islusb: unable to boot device
[4374208.392000] islusb: Request firmware for 'isl3886' failed: -2
[4374208.392000] eth1: could not upload firmware ('isl3886')
[4374208.392000] eth1: islpci_reset: failure
-- 
Hotplug load wrong prism isl driver
https://launchpad.net/malone/bugs/38824