[PATCH 2/5][FWTS-TEST] arg-show-tests-0001: update log to keep in sync with fwts

Keng-Yu Lin kengyu at canonical.com
Wed Jan 16 08:03:58 UTC 2013


On Tue, Jan 15, 2013 at 6:45 PM, Colin King <colin.king at canonical.com> wrote:
> From: Colin Ian King <colin.king at canonical.com>
>
> fwts added some extra spacing in the output and also added a new
> test uefirtmisc, so update this test to keep in sync with fwts
>
> Signed-off-by: Colin Ian King <colin.king at canonical.com>
> ---
>  arg-show-tests-0001/arg-show-tests-0001.log | 119 ++++++++++++++--------------
>  1 file changed, 60 insertions(+), 59 deletions(-)
>
> diff --git a/arg-show-tests-0001/arg-show-tests-0001.log b/arg-show-tests-0001/arg-show-tests-0001.log
> index 5be9322..3c6fbef 100644
> --- a/arg-show-tests-0001/arg-show-tests-0001.log
> +++ b/arg-show-tests-0001/arg-show-tests-0001.log
> @@ -1,68 +1,69 @@
>  Batch tests:
> - acpiinfo      General ACPI information check.
> - acpitables    ACPI table settings sanity checks.
> - apicedge      APIC Edge/Level Check.
> - apicinstance  Check for single instance of APIC/MADT table.
> - aspm          PCIe ASPM check.
> - bios32        Check BIOS32 Service Directory.
> - bios_info     Gather BIOS DMI information.
> - checksum      Check ACPI table checksum.
> - cpufreq       CPU frequency scaling tests (takes ~1-2 mins).
> - crs           Check PCI host bridge configuration using _CRS.
> - csm           Check for UEFI Compatibility Support Module.
> - cstates       Check processor C state support.
> - dmar          Check sane DMA Remapping (VT-d).
> - dmi_decode    Test DMI/SMBIOS tables for errors.
> - ebda          Validate EBDA region is mapped and reserved in memory map table.
> - fadt          FADT SCI_EN enabled check.
> - fan           Simple Fan Tests.
> - hda_audio     Check HDA Audio Pin Configs.
> - hpet_check    HPET configuration test.
> - klog          Scan kernel log for errors and warnings.
> - maxfreq       Check max CPU frequencies against max scaling frequency.
> - maxreadreq    Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices.
> - mcfg          MCFG PCI Express* memory mapped config space.
> - method        ACPI DSDT Method Semantic Tests.
> - microcode     Check if system is using latest microcode.
> - mpcheck       Check MultiProcessor Tables.
> - msr           MSR register tests.
> - mtrr          MTRR validation.
> - nx            Test if CPU NX is disabled by the BIOS.
> - oops          Scan kernel log for Oopses.
> - os2gap        OS/2 memory hole test.
> - osilinux      Disassemble DSDT to check for _OSI("Linux").
> - pcc           Processor Clocking Control (PCC) Test.
> - pciirq        Check PCI IRQ Routing Table.
> - pnp           Check BIOS Support Installation structure.
> - smbios        Check SMBIOS.
> - syntaxcheck   Re-assemble DSDT and find syntax errors and warnings.
> - version       Gather kernel system information.
> - virt          Test CPU Virtualisation Configuration.
> - wakealarm     Test ACPI Wakealarm.
> - wmi           Extract and analyse Windows Management Instrumentation (WMI).
> + acpiinfo        General ACPI information check.
> + acpitables      ACPI table settings sanity checks.
> + apicedge        APIC Edge/Level Check.
> + apicinstance    Check for single instance of APIC/MADT table.
> + aspm            PCIe ASPM check.
> + bios32          Check BIOS32 Service Directory.
> + bios_info       Gather BIOS DMI information.
> + checksum        Check ACPI table checksum.
> + cpufreq         CPU frequency scaling tests (takes ~1-2 mins).
> + crs             Check PCI host bridge configuration using _CRS.
> + csm             Check for UEFI Compatibility Support Module.
> + cstates         Check processor C state support.
> + dmar            Check sane DMA Remapping (VT-d).
> + dmi_decode      Test DMI/SMBIOS tables for errors.
> + ebda            Validate EBDA region is mapped and reserved in memory map table.
> + fadt            FADT SCI_EN enabled check.
> + fan             Simple Fan Tests.
> + hda_audio       Check HDA Audio Pin Configs.
> + hpet_check      HPET configuration test.
> + klog            Scan kernel log for errors and warnings.
> + maxfreq         Check max CPU frequencies against max scaling frequency.
> + maxreadreq      Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices.
> + mcfg            MCFG PCI Express* memory mapped config space.
> + method          ACPI DSDT Method Semantic Tests.
> + microcode       Check if system is using latest microcode.
> + mpcheck         Check MultiProcessor Tables.
> + msr             MSR register tests.
> + mtrr            MTRR validation.
> + nx              Test if CPU NX is disabled by the BIOS.
> + oops            Scan kernel log for Oopses.
> + os2gap          OS/2 memory hole test.
> + osilinux        Disassemble DSDT to check for _OSI("Linux").
> + pcc             Processor Clocking Control (PCC) Test.
> + pciirq          Check PCI IRQ Routing Table.
> + pnp             Check BIOS Support Installation structure.
> + smbios          Check SMBIOS.
> + syntaxcheck     Re-assemble DSDT and find syntax errors and warnings.
> + version         Gather kernel system information.
> + virt            Test CPU Virtualisation Configuration.
> + wakealarm       Test ACPI Wakealarm.
> + wmi             Extract and analyse Windows Management Instrumentation (WMI).
>
>  Interactive tests:
> - ac_adapter    Interactive ac_adapter power test.
> - battery       Battery Tests.
> - brightness    Interactive LCD brightness test.
> - hotkey        Hotkey scan code tests.
> - lid           Interactive lid button test.
> - power_button  Interactive power_button button test.
> + ac_adapter      Interactive ac_adapter power test.
> + battery         Battery Tests.
> + brightness      Interactive LCD brightness test.
> + hotkey          Hotkey scan code tests.
> + lid             Interactive lid button test.
> + power_button    Interactive power_button button test.
>
>  Power States tests:
> - s3            S3 suspend/resume test.
> - s3power       S3 power loss during suspend test (takes minimum of 10 minutes to run).
> - s4            S4 hibernate/resume test.
> + s3              S3 suspend/resume test.
> + s3power         S3 power loss during suspend test (takes minimum of 10 minutes to run).
> + s4              S4 hibernate/resume test.
>
>  Utilities:
> - acpidump      Dump ACPI tables.
> - cmosdump      Dump CMOS Memory.
> - ebdadump      Dump EBDA region.
> - memmapdump    Dump system memory map.
> - mpdump        Dump MultiProcessor Data.
> - romdump       Dump ROM data.
> - uefidump      Dump UEFI variables.
> + acpidump        Dump ACPI tables.
> + cmosdump        Dump CMOS Memory.
> + ebdadump        Dump EBDA region.
> + memmapdump      Dump system memory map.
> + mpdump          Dump MultiProcessor Data.
> + romdump         Dump ROM data.
> + uefidump        Dump UEFI variables.
>
>  Unsafe tests:
> - uefirttime    UEFI Runtime service time interface tests.
> - uefirtvariabl UEFI Runtime service variable interface tests.
> + uefirtmisc      UEFI miscellaneous runtime service interface tests.
> + uefirttime      UEFI Runtime service time interface tests.
> + uefirtvariable  UEFI Runtime service variable interface tests.
> --
> 1.8.0
>
>
Acked-by: Keng-Yu Lin <kengyu at canonical.com>



More information about the fwts-devel mailing list