[PATCH][FWTS-TEST] klog-0001: Update test log because of changes in klog labels
Keng-Yu Lin
kengyu at canonical.com
Fri Nov 30 07:25:12 UTC 2012
On Thu, Nov 29, 2012 at 7:45 PM, Colin King <colin.king at canonical.com> wrote:
> From: Colin Ian King <colin.king at canonical.com>
>
> Because of the changes in the way the klog test now generates error
> labels we have to update the test results here.
>
> Signed-off-by: Colin Ian King <colin.king at canonical.com>
> ---
> klog-0001/klog-0001.log | 10417 +++++++++++++++++++++++-----------------------
> klog-0001/klog-0002.log | 6 +-
> 2 files changed, 5156 insertions(+), 5267 deletions(-)
>
> diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log
> index 090de76..c4bf1ab 100644
> --- a/klog-0001/klog-0001.log
> +++ b/klog-0001/klog-0001.log
> @@ -1,7 +1,7 @@
> klog Scan kernel log for errors and warnings.
> klog ----------------------------------------------------------
> klog Test 1 of 1: Kernel log error check.
> -klog FAILED [HIGH] KlogACPIBIOSBugMultipleAPIC: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiMultipleApicMadtFound: Test 1, HIGH
> klog Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC
> klog /MADT found, using 0
> klog
> @@ -12,10 +12,10 @@ klog the kernel will by default select the first one. However,
> klog one can override this and select the Nth MADT using
> klog acpi_apic_instance=N.
> klog
> -klog FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Error: 32/64X address
> -klog mismatch in Gpe0Block: 00008018/0000000000008028, using 32
> -klog (20090903/tbfadt-427)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
> +klog HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
> +klog address mismatch in Gpe0Block: 00008018/0000000000008028,
> +klog using 32 (20090903/tbfadt-427)
> klog
> klog ADVICE: The FADT table contains a mismatch between a 32
> klog bit pointer and a 64 bit Generic Address pointer. Because
> @@ -25,10 +25,10 @@ klog then the kernel will opt for this in preference to the 64
> klog bit pointer even though this is not in accordance to the
> klog ACPI specification.
> klog
> -klog FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Error: 32/64X address
> -klog mismatch in Gpe0Block: 00008020/0000000000008028, using 32
> -klog (20090903/tbfadt-427)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
> +klog HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
> +klog address mismatch in Gpe0Block: 00008020/0000000000008028,
> +klog using 32 (20090903/tbfadt-427)
> klog
> klog ADVICE: The FADT table contains a mismatch between a 32
> klog bit pointer and a 64 bit Generic Address pointer. Because
> @@ -38,10 +38,10 @@ klog then the kernel will opt for this in preference to the 64
> klog bit pointer even though this is not in accordance to the
> klog ACPI specification.
> klog
> -klog FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Error: 32/64X address
> -klog mismatch in Gpe0Block: 0x00008020/0x0000000000008028,
> -klog using 32 (20110112/tbfadt-427)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
> +klog HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
> +klog address mismatch in Gpe0Block: 0x00008020
> +klog /0x0000000000008028, using 32 (20110112/tbfadt-427)
> klog
> klog ADVICE: The FADT table contains a mismatch between a 32
> klog bit pointer and a 64 bit Generic Address pointer. Because
> @@ -51,10 +51,10 @@ klog then the kernel will opt for this in preference to the 64
> klog bit pointer even though this is not in accordance to the
> klog ACPI specification.
> klog
> -klog FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Error: 32/64X address
> -klog mismatch in Pm2ControlBlock: 00008030/0000000000008020,
> -klog using 32 (20090903/tbfadt-427)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
> +klog HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
> +klog address mismatch in Pm2ControlBlock: 00008030
> +klog /0000000000008020, using 32 (20090903/tbfadt-427)
> klog
> klog ADVICE: The FADT table contains a mismatch between a 32
> klog bit pointer and a 64 bit Generic Address pointer. Because
> @@ -64,10 +64,10 @@ klog then the kernel will opt for this in preference to the 64
> klog bit pointer even though this is not in accordance to the
> klog ACPI specification.
> klog
> -klog FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Error: 32/64X address
> -klog mismatch in Pm2ControlBlock: 00008800/0000000000008100,
> -klog using 32 (20090903/tbfadt-427)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
> +klog HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
> +klog address mismatch in Pm2ControlBlock: 00008800
> +klog /0000000000008100, using 32 (20090903/tbfadt-427)
> klog
> klog ADVICE: The FADT table contains a mismatch between a 32
> klog bit pointer and a 64 bit Generic Address pointer. Because
> @@ -77,10 +77,10 @@ klog then the kernel will opt for this in preference to the 64
> klog bit pointer even though this is not in accordance to the
> klog ACPI specification.
> klog
> -klog FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Error: 32/64X address
> -klog mismatch in Pm2ControlBlock: 0x00000900/0x0000000000000800
> -klog , using 32 (20110112/tbfadt-427)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
> +klog HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
> +klog address mismatch in Pm2ControlBlock: 0x00000900
> +klog /0x0000000000000800, using 32 (20110112/tbfadt-427)
> klog
> klog ADVICE: The FADT table contains a mismatch between a 32
> klog bit pointer and a 64 bit Generic Address pointer. Because
> @@ -90,10 +90,10 @@ klog then the kernel will opt for this in preference to the 64
> klog bit pointer even though this is not in accordance to the
> klog ACPI specification.
> klog
> -klog FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Error: 32/64X address
> -klog mismatch in Pm2ControlBlock: 0x00001218/0x0000000000001214
> -klog , using 32 (20100428/tbfadt-427)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
> +klog HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
> +klog address mismatch in Pm2ControlBlock: 0x00001218
> +klog /0x0000000000001214, using 32 (20100428/tbfadt-427)
> klog
> klog ADVICE: The FADT table contains a mismatch between a 32
> klog bit pointer and a 64 bit Generic Address pointer. Because
> @@ -103,10 +103,10 @@ klog then the kernel will opt for this in preference to the 64
> klog bit pointer even though this is not in accordance to the
> klog ACPI specification.
> klog
> -klog FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Error: 32/64X address
> -klog mismatch in Pm2ControlBlock: 0x00001218/0x0000000000001214
> -klog , using 32 (20110413/tbfadt-430)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
> +klog HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
> +klog address mismatch in Pm2ControlBlock: 0x00001218
> +klog /0x0000000000001214, using 32 (20110413/tbfadt-430)
> klog
> klog ADVICE: The FADT table contains a mismatch between a 32
> klog bit pointer and a 64 bit Generic Address pointer. Because
> @@ -116,10 +116,10 @@ klog then the kernel will opt for this in preference to the 64
> klog bit pointer even though this is not in accordance to the
> klog ACPI specification.
> klog
> -klog FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Error: 32/64X address
> -klog mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100
> -klog , using 32 (20110112/tbfadt-427)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
> +klog HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
> +klog address mismatch in Pm2ControlBlock: 0x00008800
> +klog /0x0000000000008100, using 32 (20110112/tbfadt-427)
> klog
> klog ADVICE: The FADT table contains a mismatch between a 32
> klog bit pointer and a 64 bit Generic Address pointer. Because
> @@ -129,37 +129,39 @@ klog then the kernel will opt for this in preference to the 64
> klog bit pointer even though this is not in accordance to the
> klog ACPI specification.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorAValidRSDP: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiValidRsdpNotFound: Test 1,
> klog CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid
> klog RSDP was not found (20090903/tbxfroot-219)
> klog
> -klog ADVICE: An ACPI-compatible system must provide an RSDP
> -klog (Root System Description Pointer in the system’s low
> -klog address space. This structure’s only purpose is to
> -klog provide the physical address of the RSDT and XSDT.
> +klog ADVICE: An ACPI compatible system must provide an RSDP
> +klog (Root System Description Pointer). This structure provides
> +klog the physical address of the RSDT and XSDT. Since this
> +klog could not be found, the ACPI driver has had to disable
> +klog ACPI support.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorAValidRSDP: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiValidRsdpNotFound: Test 1,
> klog CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid
> klog RSDP was not found (20100428/tbxfroot-219)
> klog
> -klog ADVICE: An ACPI-compatible system must provide an RSDP
> -klog (Root System Description Pointer in the system’s low
> -klog address space. This structure’s only purpose is to
> -klog provide the physical address of the RSDT and XSDT.
> +klog ADVICE: An ACPI compatible system must provide an RSDP
> +klog (Root System Description Pointer). This structure provides
> +klog the physical address of the RSDT and XSDT. Since this
> +klog could not be found, the ACPI driver has had to disable
> +klog ACPI support.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorAValidRSDP: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiValidRsdpNotFound: Test 1,
> klog CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid
> klog RSDP was not found (20110112/tbxfroot-219)
> klog
> -klog ADVICE: An ACPI-compatible system must provide an RSDP
> -klog (Root System Description Pointer in the system’s low
> -klog address space. This structure’s only purpose is to
> -klog provide the physical address of the RSDT and XSDT.
> +klog ADVICE: An ACPI compatible system must provide an RSDP
> +klog (Root System Description Pointer). This structure provides
> +klog the physical address of the RSDT and XSDT. Since this
> +klog could not be found, the ACPI driver has had to disable
> +klog ACPI support.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
> -klog address mismatch in FADT - two FACS tables! 20090521
> -klog tbfadt-370
> +klog FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
> +klog : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
> +klog FADT - two FACS tables! 20090521 tbfadt-370
> klog
> klog ADVICE: The FADT table contains a mismatch between the 32
> klog bit pointer (FIRMWARE_CTRL) and 64 bit pointer
> @@ -175,10 +177,9 @@ klog tables are present in your system, which is NOT complaint
> klog with the ACPI specification. The kernel has to make a
> klog choice and opts for the 32 bit FIRMWARE_CTRL.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
> -klog address mismatch in FADT - two FACS tables! (20090903
> -klog /tbfadt-369)
> +klog FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
> +klog : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
> +klog FADT - two FACS tables! (20090903/tbfadt-369)
> klog
> klog ADVICE: The FADT table contains a mismatch between the 32
> klog bit pointer (FIRMWARE_CTRL) and 64 bit pointer
> @@ -194,10 +195,9 @@ klog tables are present in your system, which is NOT complaint
> klog with the ACPI specification. The kernel has to make a
> klog choice and opts for the 32 bit FIRMWARE_CTRL.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
> -klog address mismatch in FADT - two FACS tables! (20100121
> -klog /tbfadt-369)
> +klog FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
> +klog : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
> +klog FADT - two FACS tables! (20100121/tbfadt-369)
> klog
> klog ADVICE: The FADT table contains a mismatch between the 32
> klog bit pointer (FIRMWARE_CTRL) and 64 bit pointer
> @@ -213,10 +213,9 @@ klog tables are present in your system, which is NOT complaint
> klog with the ACPI specification. The kernel has to make a
> klog choice and opts for the 32 bit FIRMWARE_CTRL.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
> -klog address mismatch in FADT - two FACS tables! (20100428
> -klog /tbfadt-369)
> +klog FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
> +klog : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
> +klog FADT - two FACS tables! (20100428/tbfadt-369)
> klog
> klog ADVICE: The FADT table contains a mismatch between the 32
> klog bit pointer (FIRMWARE_CTRL) and 64 bit pointer
> @@ -232,10 +231,9 @@ klog tables are present in your system, which is NOT complaint
> klog with the ACPI specification. The kernel has to make a
> klog choice and opts for the 32 bit FIRMWARE_CTRL.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
> -klog address mismatch in FADT - two FACS tables! (20100702
> -klog /tbfadt-369)
> +klog FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
> +klog : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
> +klog FADT - two FACS tables! (20100702/tbfadt-369)
> klog
> klog ADVICE: The FADT table contains a mismatch between the 32
> klog bit pointer (FIRMWARE_CTRL) and 64 bit pointer
> @@ -251,10 +249,9 @@ klog tables are present in your system, which is NOT complaint
> klog with the ACPI specification. The kernel has to make a
> klog choice and opts for the 32 bit FIRMWARE_CTRL.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
> -klog address mismatch in FADT - two FACS tables! (20101013
> -klog /tbfadt-369)
> +klog FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
> +klog : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
> +klog FADT - two FACS tables! (20101013/tbfadt-369)
> klog
> klog ADVICE: The FADT table contains a mismatch between the 32
> klog bit pointer (FIRMWARE_CTRL) and 64 bit pointer
> @@ -270,10 +267,9 @@ klog tables are present in your system, which is NOT complaint
> klog with the ACPI specification. The kernel has to make a
> klog choice and opts for the 32 bit FIRMWARE_CTRL.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
> -klog address mismatch in FADT - two FACS tables! (20110112
> -klog /tbfadt-369)
> +klog FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
> +klog : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
> +klog FADT - two FACS tables! (20110112/tbfadt-369)
> klog
> klog ADVICE: The FADT table contains a mismatch between the 32
> klog bit pointer (FIRMWARE_CTRL) and 64 bit pointer
> @@ -289,10 +285,9 @@ klog tables are present in your system, which is NOT complaint
> klog with the ACPI specification. The kernel has to make a
> klog choice and opts for the 32 bit FIRMWARE_CTRL.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
> -klog address mismatch in FADT - two FACS tables! (20110316
> -klog /tbfadt-369)
> +klog FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
> +klog : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
> +klog FADT - two FACS tables! (20110316/tbfadt-369)
> klog
> klog ADVICE: The FADT table contains a mismatch between the 32
> klog bit pointer (FIRMWARE_CTRL) and 64 bit pointer
> @@ -308,10 +303,9 @@ klog tables are present in your system, which is NOT complaint
> klog with the ACPI specification. The kernel has to make a
> klog choice and opts for the 32 bit FIRMWARE_CTRL.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
> -klog address mismatch in FADT - two FACS tables! (20110413
> -klog /tbfadt-369)
> +klog FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
> +klog : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
> +klog FADT - two FACS tables! (20110413/tbfadt-369)
> klog
> klog ADVICE: The FADT table contains a mismatch between the 32
> klog bit pointer (FIRMWARE_CTRL) and 64 bit pointer
> @@ -327,2002 +321,2008 @@ klog tables are present in your system, which is NOT complaint
> klog with the ACPI specification. The kernel has to make a
> klog choice and opts for the 32 bit FIRMWARE_CTRL.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x3776BF40/0x000000003776ED40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x3776BF40
> +klog /0x000000003776ED40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x38FE4E40/0x0000000038FE4D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x38FE4E40
> +klog /0x0000000038FE4D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x38FE4E40/0x0000000038FE4D40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x38FE4E40
> +klog /0x0000000038FE4D40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x3F465F40/0x000000003F465F80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x3F465F40
> +klog /0x000000003F465F80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x3F473F40/0x000000003F473F80,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x3F473F40
> +klog /0x000000003F473F80, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x3F509F40/0x000000003F509F80,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x3F509F40
> +klog /0x000000003F509F80, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x3F509F40/0x000000003F509F80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x3F509F40
> +klog /0x000000003F509F80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x3F611E40/0x000000003F611D40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x3F611E40
> +klog /0x000000003F611D40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x3F611E40/0x000000003F611D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x3F611E40
> +klog /0x000000003F611D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x3F611E40/0x000000003F611D40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x3F611E40
> +klog /0x000000003F611D40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x6FB75F40/0x000000006FB75F80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x6FB75F40
> +klog /0x000000006FB75F80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x77603F40/0x0000000077603F80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x77603F40
> +klog /0x0000000077603F80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x77603F40/0x0000000077603F80,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x77603F40
> +klog /0x0000000077603F80, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x7762DF40/0x000000007762DF80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x7762DF40
> +klog /0x000000007762DF80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x77630F40/0x0000000077630F80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x77630F40
> +klog /0x0000000077630F80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x7776BF40/0x000000007776ED40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x7776BF40
> +klog /0x000000007776ED40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x7776BF40/0x000000007776ED40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x7776BF40
> +klog /0x000000007776ED40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x78FE4E40/0x0000000078FE4D40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x78FE4E40
> +klog /0x0000000078FE4D40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x7A7E4E40/0x000000007A7E4D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x7A7E4E40
> +klog /0x000000007A7E4D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x7BE20F40/0x000000007BE20F80,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x7BE20F40
> +klog /0x000000007BE20F80, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x7D7E4E40/0x000000007D7E4D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x7D7E4E40
> +klog /0x000000007D7E4D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x7D8C4F40/0x000000007D8C5E40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x7D8C4F40
> +klog /0x000000007D8C5E40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x7F611E40/0x000000007F611D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x7F611E40
> +klog /0x000000007F611D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x7FCEBF40/0x000000007FCE7F40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x7FCEBF40
> +klog /0x000000007FCE7F40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0x7FD5AF40/0x000000007FD5FF40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0x7FD5AF40
> +klog /0x000000007FD5FF40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xAAD87F40/0x00000000AADA1D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xAAD87F40
> +klog /0x00000000AADA1D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xAAD87F40/0x00000000AADA1D40,
> -klog using 32 (20110316/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xAAD87F40
> +klog /0x00000000AADA1D40, using 32 (20110316/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xAAD87F40/0x00000000AADA1D40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xAAD87F40
> +klog /0x00000000AADA1D40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xAADB7F40/0x00000000AADD1D40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xAADB7F40
> +klog /0x00000000AADD1D40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xAADB7F40/0x00000000AADD1D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xAADB7F40
> +klog /0x00000000AADD1D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xAADB9F40/0x00000000AADD3D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xAADB9F40
> +klog /0x00000000AADD3D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xAAF2AF40/0x00000000AAF2DD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xAAF2AF40
> +klog /0x00000000AAF2DD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xAAFE4E40/0x00000000AAFE4D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xAAFE4E40
> +klog /0x00000000AAFE4D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xAB62DF40/0x00000000AB62DF80,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xAB62DF40
> +klog /0x00000000AB62DF80, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xAB62DF40/0x00000000AB62DF80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xAB62DF40
> +klog /0x00000000AB62DF80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xAFB77F40/0x00000000AFB77F80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xAFB77F40
> +klog /0x00000000AFB77F80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xB5F17E40/0x00000000B5F17D40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xB5F17E40
> +klog /0x00000000B5F17D40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xB5F1BE40/0x00000000B5F1BD40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xB5F1BE40
> +klog /0x00000000B5F1BD40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xB6D5AF40/0x00000000B6D61D40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xB6D5AF40
> +klog /0x00000000B6D61D40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xB6DB9F40/0x00000000B6DD3D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xB6DB9F40
> +klog /0x00000000B6DD3D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xB762CF40/0x00000000B762CF80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xB762CF40
> +klog /0x00000000B762CF80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xB7B1CE40/0x00000000B7B1CD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xB7B1CE40
> +klog /0x00000000B7B1CD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xB7B1CE40/0x00000000B7B1CD40,
> -klog using 32 (20110316/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xB7B1CE40
> +klog /0x00000000B7B1CD40, using 32 (20110316/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xB7B1CE40/0x00000000B7B1CD40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xB7B1CE40
> +klog /0x00000000B7B1CD40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xB8FE4E40/0x00000000B8FE4D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xB8FE4E40
> +klog /0x00000000B8FE4D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBAD17F40/0x00000000BAD31D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBAD17F40
> +klog /0x00000000BAD31D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBAD87F40/0x00000000BADA1D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBAD87F40
> +klog /0x00000000BADA1D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBADABF40/0x00000000BADAED40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBADABF40
> +klog /0x00000000BADAED40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBADABF40/0x00000000BADAED40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBADABF40
> +klog /0x00000000BADAED40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBAF1CF40/0x00000000BAF1FD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBAF1CF40
> +klog /0x00000000BAF1FD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBAFE4E40/0x00000000BAFE4D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBAFE4E40
> +klog /0x00000000BAFE4D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBAFE5E40/0x00000000BAFE5D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBAFE5E40
> +klog /0x00000000BAFE5D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBB4D1F40/0x00000000BB4DFD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBB4D1F40
> +klog /0x00000000BB4DFD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBB583F40/0x00000000BB59DD40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBB583F40
> +klog /0x00000000BB59DD40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBB583F40/0x00000000BB59DD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBB583F40
> +klog /0x00000000BB59DD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBB5B3F40/0x00000000BB5CDD40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBB5B3F40
> +klog /0x00000000BB5CDD40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBB5B3F40/0x00000000BB5CDD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBB5B3F40
> +klog /0x00000000BB5CDD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBB5B3F40/0x00000000BB5CDD40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBB5B3F40
> +klog /0x00000000BB5CDD40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBB62CF40/0x00000000BB62CF80,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBB62CF40
> +klog /0x00000000BB62CF80, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBB62DF40/0x00000000BB62DF80,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBB62DF40
> +klog /0x00000000BB62DF80, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBB648F40/0x00000000BB64BD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBB648F40
> +klog /0x00000000BB64BD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBB649F40/0x00000000BB64CD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBB649F40
> +klog /0x00000000BB64CD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBB76BF40/0x00000000BB76ED40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBB76BF40
> +klog /0x00000000BB76ED40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBBE27F40/0x00000000BBE27F80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBBE27F40
> +klog /0x00000000BBE27F80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBBE27F40/0x00000000BBE27F80,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBBE27F40
> +klog /0x00000000BBE27F80, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBBE29F40/0x00000000BBE29F80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBBE29F40
> +klog /0x00000000BBE29F80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBDB65F40/0x00000000BDB6BE40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBDB65F40
> +klog /0x00000000BDB6BE40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBDF17E40/0x00000000BDF17D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBDF17E40
> +klog /0x00000000BDF17D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBDF18E40/0x00000000BDF18D40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBDF18E40
> +klog /0x00000000BDF18D40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBDF19E40
> +klog /0x00000000BDF19D40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40,
> -klog using 32 (20101013/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBDF19E40
> +klog /0x00000000BDF19D40, using 32 (20101013/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBDF19E40
> +klog /0x00000000BDF19D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBDF1AE40/0x00000000BDF1AD40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBDF1AE40
> +klog /0x00000000BDF1AD40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBE97CF40/0x00000000BE996D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBE97CF40
> +klog /0x00000000BE996D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBEDB7F40/0x00000000BEDD1D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBEDB7F40
> +klog /0x00000000BEDD1D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBEDB8F40/0x00000000BEDD1D40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBEDB8F40
> +klog /0x00000000BEDD1D40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBEDB8F40/0x00000000BEDD1D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBEDB8F40
> +klog /0x00000000BEDD1D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBEDB9F40/0x00000000BEDD3D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBEDB9F40
> +klog /0x00000000BEDD3D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBF4D1F40/0x00000000BF4DFD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBF4D1F40
> +klog /0x00000000BF4DFD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBF62CF40/0x00000000BF62CF80,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBF62CF40
> +klog /0x00000000BF62CF80, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBF62DF40/0x00000000BF62DF80,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBF62DF40
> +klog /0x00000000BF62DF80, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBF654F40/0x00000000BF662D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBF654F40
> +klog /0x00000000BF662D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBF7E4E40/0x00000000BF7E4D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBF7E4E40
> +klog /0x00000000BF7E4D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBFA4CF40/0x00000000BFA51F40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBFA4CF40
> +klog /0x00000000BFA51F40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBFA4CF40/0x00000000BFA51F40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBFA4CF40
> +klog /0x00000000BFA51F40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBFE17E40/0x00000000BFE17D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBFE17E40
> +klog /0x00000000BFE17D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xBFE21F40/0x00000000BFE21E40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xBFE21F40
> +klog /0x00000000BFE21E40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xC9E58F40/0x00000000C9E6ED40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xC9E58F40
> +klog /0x00000000C9E6ED40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCAB39F40/0x00000000CAB3CD40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCAB39F40
> +klog /0x00000000CAB3CD40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCAFE4E40
> +klog /0x00000000CAFE4D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCAFE4E40
> +klog /0x00000000CAFE4D40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCAFE5E40/0x00000000CAFE5D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCAFE5E40
> +klog /0x00000000CAFE5D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCB61DF40/0x00000000CB61DE40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCB61DF40
> +klog /0x00000000CB61DE40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCB61DF40/0x00000000CB61DE40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCB61DF40
> +klog /0x00000000CB61DE40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCBE4CF40/0x00000000CBE51F40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCBE4CF40
> +klog /0x00000000CBE51F40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCBE4CF40/0x00000000CBE51F40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCBE4CF40
> +klog /0x00000000CBE51F40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCBF6BF40/0x00000000CBF6ED40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCBF6BF40
> +klog /0x00000000CBF6ED40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCEF27F40/0x00000000CEF2AD40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCEF27F40
> +klog /0x00000000CEF2AD40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCEF27F40/0x00000000CEF2AD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCEF27F40
> +klog /0x00000000CEF2AD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCEF27F40/0x00000000CEF2AD40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCEF27F40
> +klog /0x00000000CEF2AD40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCEF28F40/0x00000000CEF2BD40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCEF28F40
> +klog /0x00000000CEF2BD40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCEF28F40/0x00000000CEF2BD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCEF28F40
> +klog /0x00000000CEF2BD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCEF2BF40/0x00000000CEF2ED40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCEF2BF40
> +klog /0x00000000CEF2ED40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCEF2BF40/0x00000000CEF2ED40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCEF2BF40
> +klog /0x00000000CEF2ED40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCF36BF40/0x00000000CF36ED40,
> -klog using 32 (20100702/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCF36BF40
> +klog /0x00000000CF36ED40, using 32 (20100702/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCF36BF40/0x00000000CF36ED40,
> -klog using 32 (20101013/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCF36BF40
> +klog /0x00000000CF36ED40, using 32 (20101013/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCF76BF40/0x00000000CF76ED40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCF76BF40
> +klog /0x00000000CF76ED40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCF76BF40/0x00000000CF76ED40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCF76BF40
> +klog /0x00000000CF76ED40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCF7E4E40
> +klog /0x00000000CF7E4D40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCF7E4E40
> +klog /0x00000000CF7E4D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCF7E4E40
> +klog /0x00000000CF7E4D40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCFBFAF40/0x00000000CFBF6F40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCFBFAF40
> +klog /0x00000000CFBF6F40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCFD56F40/0x00000000CFD52F40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCFD56F40
> +klog /0x00000000CFD52F40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xCFD5FF40/0x00000000CFD65E40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xCFD5FF40
> +klog /0x00000000CFD65E40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xD2F2DF40/0x00000000D2F30D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xD2F2DF40
> +klog /0x00000000D2F30D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xDB36BF40/0x00000000DB36ED40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xDB36BF40
> +klog /0x00000000DB36ED40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xDB36BF40/0x00000000DB36ED40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xDB36BF40
> +klog /0x00000000DB36ED40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40,
> -klog using 32 (20100428/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xDB76BF40
> +klog /0x00000000DB76ED40, using 32 (20100428/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xDB76BF40
> +klog /0x00000000DB76ED40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xDB76BF40
> +klog /0x00000000DB76ED40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xDEB39F40/0x00000000DEB3CD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xDEB39F40
> +klog /0x00000000DEB3CD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xDEB3AF40/0x00000000DEB3DD40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xDEB3AF40
> +klog /0x00000000DEB3DD40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xDEEBAF40/0x00000000DEEBDD40,
> -klog using 32 (20110413/tbfadt-489)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xDEEBAF40
> +klog /0x00000000DEEBDD40, using 32 (20110413/tbfadt-489)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xDEF2DF40/0x00000000DEF30D40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xDEF2DF40
> +klog /0x00000000DEF30D40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 0xDF64BF40/0x00000000DF64ED40,
> -klog using 32 (20110112/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 0xDF64BF40
> +klog /0x00000000DF64ED40, using 32 (20110112/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 3762DF40/000000003762DF80,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 3762DF40
> +klog /000000003762DF80, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 3F611E40/000000003F611D40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 3F611E40
> +klog /000000003F611D40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 7776BF40/000000007776ED40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 7776BF40
> +klog /000000007776ED40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 7DB61F40/000000007DB66F40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 7DB61F40
> +klog /000000007DB66F40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 7F3ECF40/000000007F3E8F40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 7F3ECF40
> +klog /000000007F3E8F40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 7F611E40/000000007F611D40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 7F611E40
> +klog /000000007F611D40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - 9DCC4F40/000000009DCC5E40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - 9DCC4F40
> +klog /000000009DCC5E40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - AFB75F40/00000000AFB75F80,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - AFB75F40
> +klog /00000000AFB75F80, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - B7B1CE40/00000000B7B1CD40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - B7B1CE40
> +klog /00000000B7B1CD40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - B7B1CE40/00000000B7B1CD40,
> -klog using 32 (20100121/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - B7B1CE40
> +klog /00000000B7B1CD40, using 32 (20100121/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - BADABF40/00000000BADAED40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - BADABF40
> +klog /00000000BADAED40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - BAF2DF40/00000000BAF30D40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - BAF2DF40
> +klog /00000000BAF30D40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - BB62DF40/00000000BB62DF80,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - BB62DF40
> +klog /00000000BB62DF80, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - BB76BF40/00000000BB76ED40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - BB76BF40
> +klog /00000000BB76ED40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - BBE28E40/00000000BBE28D40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - BBE28E40
> +klog /00000000BBE28D40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - BDB5BF40/00000000BDB60F40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - BDB5BF40
> +klog /00000000BDB60F40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - BDB5FF40/00000000BDB64F40,
> -klog using 32 20090521 tbfadt-487
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - BDB5FF40
> +klog /00000000BDB64F40, using 32 20090521 tbfadt-487
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - BDF17E40/00000000BDF17D40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - BDF17E40
> +klog /00000000BDF17D40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - BEDB7F40/00000000BEDD1D40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - BEDB7F40
> +klog /00000000BEDD1D40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - BF62CF40/00000000BF62CF80,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - BF62CF40
> +klog /00000000BF62CF80, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - BF76BF40/00000000BF76ED40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - BF76BF40
> +klog /00000000BF76ED40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - CBE4AF40/00000000CBE4FF40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - CBE4AF40
> +klog /00000000CBE4FF40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - CBF6BF40/00000000CBF6ED40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - CBF6BF40
> +klog /00000000CBF6ED40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - CEF28F40/00000000CEF2BD40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - CEF28F40
> +klog /00000000CEF2BD40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - CEF2CF40/00000000CEF2FD40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - CEF2CF40
> +klog /00000000CEF2FD40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - D2F2DF40/00000000D2F30D40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - D2F2DF40
> +klog /00000000D2F30D40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - DADC1F40/00000000DADD5D40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - DADC1F40
> +klog /00000000DADD5D40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - DB36BF40/00000000DB36ED40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - DB36BF40
> +klog /00000000DB36ED40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - DB76BF40/00000000DB76ED40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - DB76BF40
> +klog /00000000DB76ED40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - DEEBAF40/00000000DEEBDD40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - DEEBAF40
> +klog /00000000DEEBDD40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
> -klog address mismatch in FADT - DEF2DF40/00000000DEF30D40,
> -klog using 32 (20090903/tbfadt-486)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X FACS address mismatch in FADT - DEF2DF40
> +klog /00000000DEF30D40, using 32 (20090903/tbfadt-486)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X length
> -klog mismatch in Gpe1Block: 0/32 20090521 tbfadt-527
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X length mismatch in Gpe1Block: 0/32 20090521
> +klog tbfadt-527
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X length
> -klog mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X length mismatch in Gpe1Block: 0/32 (20090903
> +klog /tbfadt-526)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X length
> -klog mismatch in Gpe1Block: 0/32 (20100428/tbfadt-526)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X length mismatch in Gpe1Block: 0/32 (20100428
> +klog /tbfadt-526)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X length
> -klog mismatch in Gpe1Block: 0/32 (20101013/tbfadt-526)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X length mismatch in Gpe1Block: 0/32 (20101013
> +klog /tbfadt-526)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X length
> -klog mismatch in Gpe1Block: 0/32 (20110112/tbfadt-526)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X length mismatch in Gpe1Block: 0/32 (20110112
> +klog /tbfadt-526)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
> -klog Kernel message: [ 0.000000] ACPI Warning: 32/64X length
> -klog mismatch in Gpe1Block: 0/32 (20110413/tbfadt-529)
> +klog FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog /64X length mismatch in Gpe1Block: 0/32 (20110413
> +klog /tbfadt-529)
> klog
> klog ADVICE: The FADT table contains Generic Address Structure
> klog that has a mismatch between the 32 bit and 64 bit versions
> klog of an address. This should be fixed so there are no
> klog mismatches.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 0.000000] ACPI Warning: BIOS XSDT has NULL entry,
> -klog using RSDT (20110112/tbutils-663)
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 0.000000] ACPI Warning: BIOS XSDT has NULL
> +klog entry, using RSDT (20110112/tbutils-663)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
> -klog Incorrect checksum in table [APIC] - 0x3E, should be 0x41
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
> +klog checksum in table [APIC] - 0x3E, should be 0x41 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
> -klog Incorrect checksum in table [APIC] - 0x65, should be 0x68
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
> +klog checksum in table [APIC] - 0x65, should be 0x68 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
> -klog Incorrect checksum in table [APIC] - 0x69, should be 0x6C
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
> +klog checksum in table [APIC] - 0x69, should be 0x6C (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
> -klog Incorrect checksum in table [APIC] - 0x69, should be 0x6C
> -klog (20110413/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
> +klog checksum in table [APIC] - 0x69, should be 0x6C (20110413
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
> -klog Incorrect checksum in table [APIC] - 0x9E, should be 0xA1
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
> +klog checksum in table [APIC] - 0x9E, should be 0xA1 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
> -klog Incorrect checksum in table [APIC] - 0xDF, should be 0xE2
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
> +klog checksum in table [APIC] - 0xDF, should be 0xE2 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
> -klog Incorrect checksum in table [APIC] - 0xE4, should be 0xE7
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
> +klog checksum in table [APIC] - 0xE4, should be 0xE7 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
> -klog Incorrect checksum in table [XSDT] - 0x89, should be 0x7D
> -klog (20110413/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
> +klog checksum in table [XSDT] - 0x89, should be 0x7D (20110413
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm1aControlBlock: 32, using default 16
> -klog (20090903/tbfadt-607)
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm1aControlBlock: 32, using default 16 (20090903
> +klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm1aControlBlock: 32, using default 16
> -klog (20100428/tbfadt-607)
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm1aControlBlock: 32, using default 16 (20100428
> +klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm1aControlBlock: 32, using default 16
> -klog (20110112/tbfadt-607)
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm1aControlBlock: 32, using default 16 (20110112
> +klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm1aControlBlock: 32, using default 16
> -klog (20110413/tbfadt-610)
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm1aControlBlock: 32, using default 16 (20110413
> +klog /tbfadt-610)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm1bControlBlock: 32, using default 16
> -klog (20090903/tbfadt-607)
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm1bControlBlock: 32, using default 16 (20090903
> +klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm2ControlBlock: 0, using default 8 (20090903
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm2ControlBlock: 0, using default 8 (20090903
> klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm2ControlBlock: 0, using default 8 (20100428
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm2ControlBlock: 0, using default 8 (20100428
> klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm2ControlBlock: 0, using default 8 (20110112
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm2ControlBlock: 0, using default 8 (20110112
> klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm2ControlBlock: 16, using default 8 (20100428
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm2ControlBlock: 16, using default 8 (20100428
> klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm2ControlBlock: 16, using default 8 (20110112
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm2ControlBlock: 16, using default 8 (20110112
> klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm2ControlBlock: 16, using default 8 (20110413
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm2ControlBlock: 16, using default 8 (20110413
> klog /tbfadt-610)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm2ControlBlock: 32, using default 8 (20090903
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm2ControlBlock: 32, using default 8 (20090903
> klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for Pm2ControlBlock: 32, using default 8 (20110112
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for Pm2ControlBlock: 32, using default 8 (20110112
> klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
> -klog length for PmTimerBlock: 24, using default 32 (20100428
> +klog FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog for PmTimerBlock: 24, using default 32 (20100428
> klog /tbfadt-607)
> klog
> klog ADVICE: This item in the FADT is the incorrect length.
> klog Should be corrected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Gpe1Block has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Gpe1Block has zero address or length:
> klog 000000000000102C/0 20090521 tbfadt-558
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Gpe1Block has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Gpe1Block has zero address or length:
> klog 000000000000102C/0 (20090903/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Gpe1Block has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Gpe1Block has zero address or length:
> klog 000000000000802C/0 (20090903/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Gpe1Block has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Gpe1Block has zero address or length:
> klog 0x0000000000000000/0x4 (20110413/tbfadt-560)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Gpe1Block has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Gpe1Block has zero address or length:
> klog 0x000000000000102C/0x0 (20100428/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Gpe1Block has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Gpe1Block has zero address or length:
> klog 0x000000000000102C/0x0 (20101013/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Gpe1Block has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Gpe1Block has zero address or length:
> klog 0x000000000000102C/0x0 (20110112/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Gpe1Block has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Gpe1Block has zero address or length:
> klog 0x000000000000102C/0x0 (20110413/tbfadt-560)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Gpe1Block has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Gpe1Block has zero address or length:
> klog 0x00000000000044A0/0x0 (20100428/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0000000000000000/1 20090521 tbfadt-558
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0000000000000000/1 (20090903/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0000000000000050/0 (20090903/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0x0000000000000000/0x1 (20100428/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0x0000000000000000/0x1 (20101013/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0x0000000000000000/0x1 (20110112/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0x0000000000000000/0x1 (20110413/tbfadt-560)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0x0000000000000450/0x0 (20100428/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0x0000000000000450/0x0 (20110112/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0x0000000000000814/0x0 (20100428/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0x0000000000000820/0x0 (20100428/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
> -klog field Pm2ControlBlock has zero address or length:
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog Optional field Pm2ControlBlock has zero address or length:
> klog 0x0000000000000820/0x0 (20110112/tbfadt-557)
> klog
> klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
> -klog HIGH Kernel message: [ 0.000000] ACPI Warning
> +klog FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning
> klog (tbfadt-0460): Optional field "Gpe1Block" has zero address
> klog or length: 000000000000102C/0 [20080926]
> klog
> @@ -2330,16 +2330,16 @@ klog ADVICE: An ACPI table contains Generic Address Structure
> klog that has an address that is incorrectly set to zero, or a
> klog zero length. This needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogMtrryourBIOSHasConfigured: Test 1,
> -klog MEDIUM Kernel message: [ 0.000000] mtrr: your BIOS has
> -klog configured an incorrect mask, fixing it.
> +klog FAILED [MEDIUM] KlogBiosMtrrIncorrectMask: Test 1, MEDIUM
> +klog Kernel message: [ 0.000000] mtrr: your BIOS has configured
> +klog an incorrect mask, fixing it.
> klog
> klog ADVICE: The Memory Type Range Registers (MTRRs) which
> klog define memory caching policy are misconfigued by the BIOS.
> klog In this case, the mask is incorrectly set and the kernel
> klog has detected this and worked around the firmware bug.
> klog
> -klog FAILED [CRITICAL] KlogWARNINGBIOSBugCPUMTRRsDont: Test 1,
> +klog FAILED [CRITICAL] KlogBiosCpuMtrrMisconfigured: Test 1,
> klog CRITICAL Kernel message: [ 0.000000] WARNING: BIOS bug:
> klog CPU MTRRs don't cover all of memory, losing 1408MB of RAM.
> klog
> @@ -2351,7 +2351,7 @@ klog memory available to be safe. Either check that the BIOS
> klog memory caching options are set correctly or contact your
> klog BIOS vendor to get this fixed.
> klog
> -klog FAILED [CRITICAL] KlogWARNINGBIOSBugCPUMTRRsDont: Test 1,
> +klog FAILED [CRITICAL] KlogBiosCpuMtrrMisconfigured: Test 1,
> klog CRITICAL Kernel message: [ 0.000000] WARNING: BIOS bug:
> klog CPU MTRRs don't cover all of memory, losing 4MB of RAM.
> klog
> @@ -2363,19 +2363,20 @@ klog memory available to be safe. Either check that the BIOS
> klog memory caching options are set correctly or contact your
> klog BIOS vendor to get this fixed.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFoundUnknownOpcode: Test 1,
> -klog CRITICAL Kernel message: [ 0.022719] ACPI Error: Found
> -klog unknown opcode 0xFD at AML address f7ffe14c offset 0xE8,
> -klog ignoring (20110112/psloop-141)
> +klog FAILED [HIGH] KlogAcpiUnknownAmlOpcode: Test 1, HIGH
> +klog Kernel message: [ 0.022719] ACPI Error: Found unknown
> +klog opcode 0xFD at AML address f7ffe14c offset 0xE8, ignoring
> +klog (20110112/psloop-141)
> klog
> -klog ADVICE: An illegal AML opcode has been found and is
> -klog ignored. This indicates either badly compiled code or
> -klog opcode corruption in the DSDT or SSDT tables or a bug in
> -klog the ACPI execution engine. Recommend disassembing using
> -klog iasl to find any offending code.
> +klog ADVICE: ACPI execution run time error: The ACPI
> +klog interpreter has reached an opcode that is unknown, this
> +klog normally is a bug in the underlying AML code either
> +klog because of badly written AML code or the compiler has
> +klog produced code that is incorrect or the ACPI interpreter
> +klog does not support this valid opcode.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.025446] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.025446] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x007B] at table offset 0x00BE (20110112/psloop-526)
> klog
> @@ -2385,8 +2386,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.025463] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.025463] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x007B] at table offset 0x00C3 (20110112/psloop-526)
> klog
> @@ -2396,8 +2397,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.034090] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.034090] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node ee025630),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -2405,15 +2406,15 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogFirmwareBug: Test 1, HIGH Kernel message
> -klog : [ 0.040119] [Firmware Bug]: the BIOS has corrupted
> -klog hw-PMU resources (MSR 186 is 400000)
> +klog FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
> +klog message: [ 0.040119] [Firmware Bug]: the BIOS has
> +klog corrupted hw-PMU resources (MSR 186 is 400000)
> klog
> klog ADVICE: The kernel has detected a Firmware bug in the BIOS
> klog or ACPI which needs investigating and fixing.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.042222] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.042222] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x0070] at table offset 0x2366 (20100121/psloop-526)
> klog
> @@ -2423,8 +2424,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.042240] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.042240] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x0070] at table offset 0x006C (20090903/psloop-522)
> klog
> @@ -2434,8 +2435,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.042253] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.042253] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x0070] at table offset 0x006F (20090903/psloop-522)
> klog
> @@ -2445,8 +2446,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.042265] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.042265] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x0070] at table offset 0x0070 (20090903/psloop-522)
> klog
> @@ -2456,8 +2457,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.042279] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.042279] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x0070] at table offset 0x0077 (20090903/psloop-522)
> klog
> @@ -2467,8 +2468,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.042291] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.042291] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x0070] at table offset 0x007C (20090903/psloop-522)
> klog
> @@ -2478,8 +2479,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.042302] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.042302] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x007B] at table offset 0x007D (20090903/psloop-522)
> klog
> @@ -2489,8 +2490,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.042311] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.042311] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x007B] at table offset 0x007F (20090903/psloop-522)
> klog
> @@ -2500,8 +2501,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.042322] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.042322] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x007B] at table offset 0x0080 (20090903/psloop-522)
> klog
> @@ -2511,8 +2512,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
> -klog Test 1, CRITICAL Kernel message: [ 0.044066] ACPI Warning:
> +klog FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 1, CRITICAL Kernel message: [ 0.044066] ACPI Warning:
> klog Detected an unsupported executable opcode at module-level:
> klog [0x0070] at table offset 0x678F (20100428/psloop-526)
> klog
> @@ -2522,8 +2523,8 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
> klog the ACPI execution engine. Recommend disassembing using
> klog iasl to find any offending code.
> klog
> -klog FAILED [HIGH] KlogACPIWarningParameterCountMismatch: Test
> -klog 1, HIGH Kernel message: [ 0.045570] ACPI Warning: For
> +klog FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
> +klog HIGH Kernel message: [ 0.045570] ACPI Warning: For
> klog _SB_.PCI0.LPCB.H_EC._GLK: Parameter count mismatch - ASL
> klog declared 1, ACPI requires 0 (20110112/nspredef-352)
> klog
> @@ -2531,33 +2532,34 @@ klog ADVICE: The ACPI Method was executing with a different
> klog number of parameters than the Method expected. This should
> klog be fixed.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.050847] ACPI Warning:
> -klog Package List length (0x10) larger than NumElements count
> -klog (0x8), truncated
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.050847] ACPI Warning: Package
> +klog List length (0x10) larger than NumElements count (0x8),
> +klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.053909] ACPI Warning:
> -klog Package List length (0x10) larger than NumElements count
> -klog (0x6), truncated
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.053909] ACPI Warning: Package
> +klog List length (0x10) larger than NumElements count (0x6),
> +klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.074070] ACPI Error: The DSDT has been corrupted or
> -klog replaced - old, new headers below (20110413/tbutils-372)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.074070] ACPI Error: The DSDT has been
> +klog corrupted or replaced - old, new headers below (20110413
> +klog /tbutils-372)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.074090] ACPI Error: Please send DMI info to
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.074090] ACPI Error: Please send DMI info to
> klog linux-acpi at vger.kernel.org
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -2565,89 +2567,89 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.076767] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xA6, should be 0x97
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.076767] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xA6, should be 0x97 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.077157] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x4C, should be 0x21
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.077157] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x4C, should be 0x21 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.077854] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0._OSC] (Node f4c250d8),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.077854] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0._OSC] (Node f4c250d8), AE_NOT_FOUND
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.078226] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_PR_.CPU1.APCT] (Node f7033090),
> -klog AE_NO_MEMORY
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.078226] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1.APCT] (Node
> +klog f7033090), AE_NO_MEMORY
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.078254] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_PR_.CPU1.GCAP] (Node f7033078),
> -klog AE_NO_MEMORY
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.078254] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1.GCAP] (Node
> +klog f7033078), AE_NO_MEMORY
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.078268] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 07, should be 06
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.078268] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 07, should be 06 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.078278] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_PR_.CPU1._PDC] (Node f7033048),
> -klog AE_NO_MEMORY
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.078278] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
> +klog f7033048), AE_NO_MEMORY
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.078686] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x38, should be 0x81
> -klog (20110413/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.078686] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x38, should be 0x81 (20110413
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.083817] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xF9, should be 0xF3
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.083817] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xF9, should be 0xF3 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.085590] ACPI Error: Could not map memory at
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.085590] ACPI Error: Could not map memory at
> klog 0x000000007F5E3520, size 463 (20110112/exregion-178)
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -2655,26 +2657,26 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.085606] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU1.APPT] (Node f403d228), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.085606] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU1.APPT] (Node f403d228),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.085618] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU1.GCAP] (Node f403d1f8), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.085618] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU1.GCAP] (Node f403d1f8),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.085627] ACPI Error: Could not map memory at
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.085627] ACPI Error: Could not map memory at
> klog 0x000000007D3E1520, size 463 (20110112/exregion-178)
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -2682,35 +2684,35 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.085628] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU1._PDC] (Node f403d1c8), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.085628] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU1._PDC] (Node f403d1c8),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.085974] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x6B, should be 0x39
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.085974] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x6B, should be 0x39 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.086054] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0x96
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.086054] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0x96 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.086081] ACPI Error: Could not map memory at
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.086081] ACPI Error: Could not map memory at
> klog 0x000000007F395420, size 141 (20110112/exregion-178)
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -2718,35 +2720,35 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.086097] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU1.APCT] (Node f403d210), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.086097] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU1.APCT] (Node f403d210),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.086108] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU2.GCAP] (Node f403d270), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.086108] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU2.GCAP] (Node f403d270),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.086118] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU2._PDC] (Node f403d240), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.086118] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU2._PDC] (Node f403d240),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.086119] ACPI Error: Could not map memory at
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.086119] ACPI Error: Could not map memory at
> klog 0x000000007D198120, size 141 (20110112/exregion-178)
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -2754,146 +2756,145 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.088999] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xE8, should be 0xDB
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.088999] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xE8, should be 0xDB (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.089613] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xB3, should be 0xAE
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.089613] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xB3, should be 0xAE (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.089701] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x77, should be 0x6C
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.089701] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x77, should be 0x6C (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.091402] ACPI Warning:
> -klog Package List length (0x7) larger than NumElements count
> -klog (0x3), truncated
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.091402] ACPI Warning: Package
> +klog List length (0x7) larger than NumElements count (0x3),
> +klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.091463] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1.APPT] (Node
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 0.091463] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1.APPT] (Node
> klog f701e228), AE_INVALID_TABLE_LENGTH
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.091510] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1.GCAP] (Node
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 0.091510] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1.GCAP] (Node
> klog f701e1f8), AE_INVALID_TABLE_LENGTH
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.091541] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - F6, should be E7
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.091541] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - F6, should be E7 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.091552] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 0.091552] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
> klog f701e1c8), AE_INVALID_TABLE_LENGTH
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.091778] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 8E, should be 7F
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.091778] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 8E, should be 7F (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.091911] ACPI Warning:
> -klog Incorrect checksum in table [APIC] - 0x8E, should be 0x91
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.091911] ACPI Warning: Incorrect
> +klog checksum in table [APIC] - 0x8E, should be 0x91 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.092524] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_PR_.CPU1.APCT] (Node f701e210),
> -klog AE_NO_MEMORY
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.092524] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1.APCT] (Node
> +klog f701e210), AE_NO_MEMORY
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.092570] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_PR_.CPU2.GCAP] (Node f701e270),
> -klog AE_NO_MEMORY
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.092570] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU2.GCAP] (Node
> +klog f701e270), AE_NO_MEMORY
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.092612] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_PR_.CPU2._PDC] (Node f701e240),
> -klog AE_NO_MEMORY
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.092612] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU2._PDC] (Node
> +klog f701e240), AE_NO_MEMORY
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
> -klog HIGH Kernel message: [ 0.093544] ACPI Error: Needed type
> -klog [Reference], found [Device] f7019f90 (20100428
> -klog /exresop-104)
> +klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
> +klog message: [ 0.093544] ACPI Error: Needed type [Reference],
> +klog found [Device] f7019f90 (20100428/exresop-104)
> klog
> klog ADVICE: An ACPI Method has returned an Device type when a
> klog Reference type was expected.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.094477] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x97, should be 0x90
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.094477] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x97, should be 0x90 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogFirmwareBugACPINoBQC: Test 1, HIGH
> -klog Kernel message: [ 0.094856] [Firmware Bug]: ACPI: No _BQC
> -klog method, cannot determine initial brightness
> +klog FAILED [HIGH] KlogAcpiMissingBqc: Test 1, HIGH Kernel
> +klog message: [ 0.094856] [Firmware Bug]: ACPI: No _BQC method,
> +klog cannot determine initial brightness
> klog
> klog ADVICE: _BQC (Brightness Query Current level) seems to be
> klog missing. This method returns the current brightness level
> klog of a built-in display output device.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.095719] ACPI Error: Could not map memory at
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.095719] ACPI Error: Could not map memory at
> klog 0x0000000087127520, size 463 (20110112/exregion-178)
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -2901,43 +2902,43 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.095737] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU1.APPT] (Node f383e498), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.095737] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU1.APPT] (Node f383e498),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.095749] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU1.GCAP] (Node f383e468), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.095749] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU1.GCAP] (Node f383e468),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.095760] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU1._PDC] (Node f383e438), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.095760] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU1._PDC] (Node f383e438),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogFirmwareBugACPIbrightnessControl: Test 1
> -klog , HIGH Kernel message: [ 0.095817] [Firmware Bug]: ACPI:
> -klog ACPI brightness control misses _BQC function
> +klog FAILED [HIGH] KlogAcpiMissingBqc: Test 1, HIGH Kernel
> +klog message: [ 0.095817] [Firmware Bug]: ACPI: ACPI brightness
> +klog control misses _BQC function
> klog
> klog ADVICE: _BQC (Brightness Query Current level) seems to be
> klog missing. This method returns the current brightness level
> klog of a built-in display output device.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.096257] ACPI Error: Could not map memory at
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.096257] ACPI Error: Could not map memory at
> klog 0x0000000086DB1C20, size 141 (20110112/exregion-178)
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -2945,61 +2946,61 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.096273] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU1.APCT] (Node f383e480), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.096273] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU1.APCT] (Node f383e480),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.096285] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU2.GCAP] (Node f383e4e0), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.096285] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU2.GCAP] (Node f383e4e0),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.096295] ACPI Error: Method parse/execution
> -klog failed [_PR_.CPU2._PDC] (Node f383e4b0), AE_NO_MEMORY
> -klog (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.096295] ACPI Error: Method parse
> +klog /execution failed [_PR_.CPU2._PDC] (Node f383e4b0),
> +klog AE_NO_MEMORY (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.096447] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 66, should be 62
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.096447] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 66, should be 62 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.098113] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x2C, should be 0x28
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.098113] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x2C, should be 0x28 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.099413] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - E2, should be D9
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.099413] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - E2, should be D9 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
> klog CRITICAL Kernel message: [ 0.101941] ACPI Error: Field
> klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits)
> klog (20110112/dsopcode-597)
> @@ -3008,170 +3009,169 @@ klog ADVICE: The field exceeds the allocated buffer size. This
> klog can lead to unexpected results when fetching data outside
> klog this region.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.101946] ACPI Error: Method parse
> -klog /execution failed [_SB_.MEM_._CRS] (Node f442af60),
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.101946] ACPI Error: Method parse/execution
> +klog failed [_SB_.MEM_._CRS] (Node f442af60),
> klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.101953] ACPI Error: Method
> -klog execution failed [_SB_.MEM_._CRS] (Node f442af60),
> -klog AE_AML_BUFFER_LIMIT (20110112/uteval-103)
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.101953] ACPI Error: Method execution failed
> +klog [_SB_.MEM_._CRS] (Node f442af60), AE_AML_BUFFER_LIMIT
> +klog (20110112/uteval-103)
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.102803] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 6E, should be 40
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.102803] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 6E, should be 40 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.104297] ACPI Error (psargs-0359): [OSYS] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.104297] ACPI Error (psargs-0359): [OSYS]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.104304] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.ACEL._STA]
> -klog (Node f701c4e0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.104304] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.ACEL._STA] (Node
> +klog f701c4e0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.105061] ACPI Warning:
> -klog Package List length (0xCA) larger than NumElements count
> -klog (0x4), truncated
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.105061] ACPI Warning: Package
> +klog List length (0xCA) larger than NumElements count (0x4),
> +klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.106912] ACPI Warning:
> -klog Package List length (0x5) larger than NumElements count
> -klog (0x2), truncated
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.106912] ACPI Warning: Package
> +klog List length (0x5) larger than NumElements count (0x2),
> +klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.108470] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 3F, should be 3B
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.108470] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 3F, should be 3B (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.109343] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x29, should be 0x1C
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.109343] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x29, should be 0x1C (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
> -klog HIGH Kernel message: [ 0.109618] ACPI Error: Needed type
> -klog [Reference], found [Device] f7012f90 (20090903
> -klog /exresop-104)
> +klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
> +klog message: [ 0.109618] ACPI Error: Needed type [Reference],
> +klog found [Device] f7012f90 (20090903/exresop-104)
> klog
> klog ADVICE: An ACPI Method has returned an Device type when a
> klog Reference type was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.109635] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> -klog f701adc8), AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 0.109635] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node f701adc8),
> +klog AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.110905] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 32, should be 25
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.110905] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 32, should be 25 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.113709] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 0.113709] ACPI Error: Method parse
> klog /execution failed [_PR_.CPU1._PDC] (Node f5822150),
> klog AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.113864] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 0.113864] ACPI Error: Method parse
> klog /execution failed [_PR_.CPU2._PDC] (Node f58221e0),
> klog AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.114544] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 0.114544] ACPI Error: Method parse
> klog /execution failed [_PR_.CPU0._PDC] (Node f54211c8),
> klog AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.115838] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 79, should be 6C
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.115838] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 79, should be 6C (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.118277] ACPI Error (psargs-0359): [SUPP] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.118277] ACPI Error (psargs-0359): [SUPP]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.118284] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> -klog f7012780), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.118284] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node f7012780),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.118568] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 2F, should be 22
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.118568] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 2F, should be 22 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.120765] ACPI Warning for
> klog _SB_.PCI0.P2P_._PRT: Return Package has no elements
> klog (empty) (20090903/nspredef-433)
> @@ -3180,8 +3180,8 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.122347] ACPI Error: Could not map memory at
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.122347] ACPI Error: Could not map memory at
> klog 0x00000000000FFA32, size 0 (20100428/exregion-178)
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -3189,16 +3189,16 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.122369] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_PR_.CPU0._PDC] (Node f70191c8),
> -klog AE_NO_MEMORY
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.122369] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU0._PDC] (Node
> +klog f70191c8), AE_NO_MEMORY
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.128150] ACPI Warning for
> klog _SB_.PCI0.P32_._PRT: Return Package has no elements
> klog (empty) (20090903/nspredef-433)
> @@ -3207,16 +3207,16 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.132540] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - CB, should be C6
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.132540] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - CB, should be C6 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
> klog CRITICAL Kernel message: [ 0.136585] ACPI Error: Field
> klog [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits)
> klog (20090903/dsopcode-596)
> @@ -3225,50 +3225,49 @@ klog ADVICE: The field exceeds the allocated buffer size. This
> klog can lead to unexpected results when fetching data outside
> klog this region.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.136600] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed
> -klog [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node dd8159d8),
> -klog AE_AML_BUFFER_LIMIT
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.136600] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS]
> +klog (Node dd8159d8), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.136637] ACPI Error (uteval-0250):
> -klog Method execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS]
> -klog (Node dd8159d8), AE_AML_BUFFER_LIMIT
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.136637] ACPI Error (uteval-0250): Method
> +klog execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node
> +klog dd8159d8), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.137394] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 29, should be 1A
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.137394] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 29, should be 1A (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogFirmwareBug: Test 1, HIGH Kernel message
> -klog : [ 0.140000] [Firmware Bug]: the BIOS has corrupted
> -klog hw-PMU resources (MSR 186 is 43003c)
> +klog FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
> +klog message: [ 0.140000] [Firmware Bug]: the BIOS has
> +klog corrupted hw-PMU resources (MSR 186 is 43003c)
> klog
> klog ADVICE: The kernel has detected a Firmware bug in the BIOS
> klog or ACPI which needs investigating and fixing.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.141112] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - ED, should be E8
> -klog 20090521 tbutils-246
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.141112] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - ED, should be E8 20090521
> +klog tbutils-246
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.150000] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.150000] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
> klog ffff880137e47618), AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -3276,7 +3275,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.150000] ACPI Error: No handler for
> klog Region [ERAM] (ffff880137e58e10) [EmbeddedControl]
> klog (20110112/evregion-369)
> @@ -3285,44 +3284,44 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.154764] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 7D, should be 6E
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.154764] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 7D, should be 6E (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.159797] ACPI Error: Method parse
> -klog /execution failed [_SB_._OSC] (Node f4421648),
> -klog AE_NOT_FOUND (20110413/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.159797] ACPI Error: Method parse/execution
> +klog failed [_SB_._OSC] (Node f4421648), AE_NOT_FOUND (20110413
> +klog /psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.160246] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
> -klog ffff880147830960), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.160246] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.LPC0.EC0_._REG] (Node ffff880147830960),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.160246] ACPI Error: [_SB_.PHSR] Namespace lookup
> -klog failure, AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.160246] ACPI Error: [_SB_.PHSR] Namespace
> +klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [MEDIUM] KlogMtrryourCPUsHadInconsistent: Test 1,
> -klog MEDIUM Kernel message: [ 0.160449] mtrr: your CPUs had
> +klog FAILED [MEDIUM] KlogBiosMtrrsInconsistentAcrossCPUs: Test
> +klog 1, MEDIUM Kernel message: [ 0.160449] mtrr: your CPUs had
> klog inconsistent fixed MTRR settings
> klog
> klog ADVICE: The fixed Memory Type Range Registers (MTRRs)
> @@ -3331,69 +3330,69 @@ klog across all CPUs which is a firmware bug. The kernel has
> klog worked around this bug, but it may be worth getting the
> klog BIOS vendor to fix this.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.163431] ACPI Warning:
> -klog Package List length (0x6) larger than NumElements count
> -klog (0x3), truncated
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.163431] ACPI Warning: Package
> +klog List length (0x6) larger than NumElements count (0x3),
> +klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.163687] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xFC, should be 0xFB
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.163687] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xFC, should be 0xFB (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.164073] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xEE, should be 0xED
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.164073] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xEE, should be 0xED (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.165683] ACPI Error: [CDW1] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.165683] ACPI Error: [CDW1] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.165689] ACPI Error: Method parse
> -klog /execution failed [_SB_._OSC] (Node f3821648),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.165689] ACPI Error: Method parse/execution
> +klog failed [_SB_._OSC] (Node f3821648), AE_NOT_FOUND (20110112
> +klog /psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.166264] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_._OSC] (Node
> -klog f701a648), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.166264] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_._OSC] (Node f701a648),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.166294] ACPI Error: Method parse
> -klog /execution failed [_SB_._OSC] (Node f4021648),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.166294] ACPI Error: Method parse/execution
> +klog failed [_SB_._OSC] (Node f4021648), AE_NOT_FOUND (20110112
> +klog /psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.166323] ACPI Error: No handler for
> klog Region [ERAM] (f7022168) [EmbeddedControl] (20100428
> klog /evregion-369)
> @@ -3402,16 +3401,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.166336] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.166336] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> klog (Node f7021bb8), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.166808] ACPI Error: No handler for
> klog Region [ERAM] (f7023938) [EmbeddedControl] (20100428
> klog /evregion-369)
> @@ -3420,140 +3419,140 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.166808] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.HTEV] (Node
> -klog f701be10), AE_NOT_EXIST
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.166808] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.HTEV] (Node f701be10),
> +klog AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.166808] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.166808] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
> klog (Node f7024d08), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.169111] ACPI Error: [HPTF] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.169111] ACPI Error: [HPTF] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.169117] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.HPET._STA] (Node f402ae58),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.169117] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.169362] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x18, should be 0x13
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.169362] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x18, should be 0x13 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.169398] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x15, should be 0xAC
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.169398] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x15, should be 0xAC (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.170000] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81a06440)
> -klog , AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.170000] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node ffffffff81a06440),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.170000] ACPI Warning:
> -klog Package List length (0x6) larger than NumElements count
> -klog (0x2), truncated
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.170000] ACPI Warning: Package
> +klog List length (0x6) larger than NumElements count (0x2),
> +klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.170352] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0xEA, should be 0x42
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.170352] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0xEA, should be 0x42 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.171073] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x67, should be 0x92
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.171073] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x67, should be 0x92 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.171715] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0xAB
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.171715] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0xAB (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.171916] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.171916] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f700e3d8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.172406] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x22, should be 0x15
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.172406] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x22, should be 0x15 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.172679] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0xA5
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.172679] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0xA5 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.172776] ACPI Warning:
> -klog Package List length (1) larger than NumElements count (0),
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.172776] ACPI Warning: Package
> +klog List length (1) larger than NumElements count (0),
> klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.172868] ACPI Error: No handler for
> klog Region [RAM_] (f7014618) [EmbeddedControl] 20090521
> klog evregion-319
> @@ -3562,78 +3561,77 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
> -klog message: [ 0.172873] ACPI Error: Region EmbeddedControl(3)
> -klog has no handler 20090521 exfldio-294
> +klog FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
> +klog Kernel message: [ 0.172873] ACPI Error: Region
> +klog EmbeddedControl(3) has no handler 20090521 exfldio-294
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.172880] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.172880] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> klog (Node f70159f0), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.173062] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0xAA, should be 0xED
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.173062] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0xAA, should be 0xED (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.173605] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.173605] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f70215e8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.173745] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x83, should be 0x27
> -klog (20110413/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.173745] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x83, should be 0x27 (20110413
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.173917] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c08d6804),
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.173917] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [] (Node c08d6804),
> klog AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.173917] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c08d6804),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.173917] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node c08d6804), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.175144] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 95, should be 8C
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.175144] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 95, should be 8C (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.175379] ACPI Error: No handler for
> klog Region [ECXP] (f70218e8) [EmbeddedControl] (20100428
> klog /evregion-369)
> @@ -3642,140 +3640,139 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.175394] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.175394] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU0._OSC] (Node
> klog f7025558), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.175428] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.175428] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU0._PDC] (Node
> klog f7025540), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.175892] ACPI Warning:
> -klog Package List length (0x1) larger than NumElements count
> -klog (0x0), truncated
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.175892] ACPI Warning: Package
> +klog List length (0x1) larger than NumElements count (0x0),
> +klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.175987] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - D7, should be C8
> -klog 20090521 tbutils-246
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.175987] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - D7, should be C8 20090521
> +klog tbutils-246
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.176309] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xCF, should be 0xCE
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.176309] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xCF, should be 0xCE (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.176410] ACPI Error: [RAMB] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110413/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.176410] ACPI Error: [RAMB] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110413/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.176680] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - D6, should be C7
> -klog 20090521 tbutils-246
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.176680] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - D6, should be C7 20090521
> +klog tbutils-246
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.176840] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0xAC, should be 0x4D
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.176840] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0xAC, should be 0x4D (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.177033] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - ED, should be EC
> -klog 20090521 tbutils-246
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.177033] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - ED, should be EC 20090521
> +klog tbutils-246
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
> -klog Test 1, MEDIUM Kernel message: [ 0.177048] [Firmware Bug]:
> -klog PCI: MMCONFIG at [mem 0xe0000000-0xe03fffff] not reserved
> -klog in ACPI motherboard resources
> +klog FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
> +klog MEDIUM Kernel message: [ 0.177048] [Firmware Bug]: PCI:
> +klog MMCONFIG at [mem 0xe0000000-0xe03fffff] not reserved in
> +klog ACPI motherboard resources
> klog
> klog ADVICE: It appears that PCI config space has been
> klog configured for a specific device but does not appear to be
> klog reserved by the ACPI motherboard resources.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
> -klog HIGH Kernel message: [ 0.177377] ACPI Error: Needed type
> -klog [Reference], found [Device] f701af90 (20100428
> -klog /exresop-104)
> +klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
> +klog message: [ 0.177377] ACPI Error: Needed type [Reference],
> +klog found [Device] f701af90 (20100428/exresop-104)
> klog
> klog ADVICE: An ACPI Method has returned an Device type when a
> klog Reference type was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.177377] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> -klog f7022dc8), AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 0.177377] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node f7022dc8),
> +klog AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.177506] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0xA1, should be 0x30
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.177506] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0xA1, should be 0x30 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.177670] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 1C, should be 17
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.177670] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 1C, should be 17 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.178040] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xF7, should be 0xE8
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.178040] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xF7, should be 0xE8 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.178420] ACPI Error: No handler for
> klog Region [SACS] (f701b500) [PCI_Config] (20090903
> klog /evregion-319)
> @@ -3784,17 +3781,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.178434] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.178434] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D0._STA] (Node
> klog f7072000), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.178458] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.178458] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D0._STA] (Node f7072000),
> klog AE_NOT_EXIST
> klog
> @@ -3802,17 +3799,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.178486] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.178486] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D1._STA] (Node
> klog f70720a8), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.178510] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.178510] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D1._STA] (Node f70720a8),
> klog AE_NOT_EXIST
> klog
> @@ -3820,17 +3817,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.178539] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.178539] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D0._STA] (Node
> klog f7072210), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.178563] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.178563] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D0._STA] (Node f7072210),
> klog AE_NOT_EXIST
> klog
> @@ -3838,17 +3835,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.178590] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.178590] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D1._STA] (Node
> klog f70722b8), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.178614] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.178614] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D1._STA] (Node f70722b8),
> klog AE_NOT_EXIST
> klog
> @@ -3856,98 +3853,97 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.179475] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0xAB
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.179475] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0xAB (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.179688] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.179688] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f74174c8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.181591] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> -klog f7022db0), AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 0.181591] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node f7022db0),
> +klog AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.181679] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.181679] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f740f438), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.181959] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x0A, should be 0x09
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.181959] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x0A, should be 0x09 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.182122] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 7D, should be 70
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.182122] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 7D, should be 70 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.182199] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0._OSC] (Node f4c25228),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.182199] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0._OSC] (Node f4c25228), AE_NOT_FOUND
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.182199] ACPI Error: [Z012] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.182199] ACPI Error: [Z012] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.182639] ACPI Error (psargs-0359): [ECEN] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.182639] ACPI Error (psargs-0359): [ECEN]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.182645] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c090665c),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.182645] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node c090665c), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.183306] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.183306] ACPI Error: Method parse
> klog /execution failed [_PR_.CPU0._PDC] (Node f403a228),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -3955,16 +3951,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.183518] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 10, should be 03
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.183518] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 10, should be 03 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.183725] ACPI Error: No handler for
> klog Region [SACS] (f70c20f0) [PCI_Config] (20090903
> klog /evregion-319)
> @@ -3973,17 +3969,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.183734] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.183734] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D0._STA] (Node
> klog f70c4180), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.183755] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.183755] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D0._STA] (Node f70c4180),
> klog AE_NOT_EXIST
> klog
> @@ -3991,17 +3987,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.183773] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.183773] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D1._STA] (Node
> klog f70c4240), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.183793] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.183793] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D1._STA] (Node f70c4240),
> klog AE_NOT_EXIST
> klog
> @@ -4009,17 +4005,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.183812] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.183812] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D0._STA] (Node
> klog f70c43c0), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.183832] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.183832] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D0._STA] (Node f70c43c0),
> klog AE_NOT_EXIST
> klog
> @@ -4027,17 +4023,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.183850] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.183850] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D1._STA] (Node
> klog f70c4480), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.183870] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.183870] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D1._STA] (Node f70c4480),
> klog AE_NOT_EXIST
> klog
> @@ -4045,367 +4041,363 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.183948] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0x8E
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.183948] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0x8E (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.184086] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x69, should be 0x68
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.184086] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x69, should be 0x68 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.184314] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.184314] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f7015eb8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.185673] ACPI Error (dswload-0659): [___P] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.185673] ACPI Error (dswload-0659): [___P]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.185686] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 0.185686] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
> klog f701a150), AE_INVALID_TABLE_LENGTH
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.185688] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._INI] (Node
> -klog f700f6c0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.185688] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._INI] (Node f700f6c0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.185862] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU2._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 0.185862] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU2._PDC] (Node
> klog f701a1e0), AE_INVALID_TABLE_LENGTH
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.186281] ACPI Warning:
> -klog Package List length (C) larger than NumElements count (4),
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.186281] ACPI Warning: Package
> +klog List length (C) larger than NumElements count (4),
> klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.186529] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - B9, should be AC
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.186529] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - B9, should be AC (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.187574] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 77, should be 76
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.187574] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 77, should be 76 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.187800] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c0994f7c),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.187800] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node c0994f7c), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.187872] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - B6, should be B3
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.187872] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - B6, should be B3 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.187981] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 8D, should be 8C
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.187981] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 8D, should be 8C (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.187992] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 40, should be 3F
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.187992] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 40, should be 3F (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.188197] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 6A, should be 61
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.188197] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 6A, should be 61 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.188232] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x07, should be 0x59
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.188232] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x07, should be 0x59 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.188487] ACPI Error (psargs-0359): q z Namespace lookup
> -klog failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.188487] ACPI Error (psargs-0359): q z
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.188669] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x05, should be 0xE5
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.188669] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x05, should be 0xE5 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
> -klog HIGH Kernel message: [ 0.189086] ACPI Error: Needed type
> -klog [Reference], found [Device] f700ff90 (20090903
> -klog /exresop-104)
> +klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
> +klog message: [ 0.189086] ACPI Error: Needed type [Reference],
> +klog found [Device] f700ff90 (20090903/exresop-104)
> klog
> klog ADVICE: An ACPI Method has returned an Device type when a
> klog Reference type was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.189100] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> -klog f7017dc8), AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 0.189100] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node f7017dc8),
> +klog AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
> -klog HIGH Kernel message: [ 0.189451] ACPI Error: Needed type
> -klog [Reference], found [Device] f700ef90 20090521 exresop-104
> +klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
> +klog message: [ 0.189451] ACPI Error: Needed type [Reference],
> +klog found [Device] f700ef90 20090521 exresop-104
> klog
> klog ADVICE: An ACPI Method has returned an Device type when a
> klog Reference type was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.189466] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> -klog f7016dc8), AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 0.189466] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node f7016dc8),
> +klog AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.189515] ACPI Error (psargs-0359): [CVCL] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.189515] ACPI Error (psargs-0359): [CVCL]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.189522] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.DIGI._STA]
> -klog (Node f702a390), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.189522] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.DIGI._STA] (Node
> +klog f702a390), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.191013] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x81, should be 0xE5
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.191013] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x81, should be 0xE5 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.191774] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 37, should be 28
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.191774] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 37, should be 28 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.191906] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c098ff6c),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.191906] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node c098ff6c), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.192037] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xD9, should be 0xCC
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.192037] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xD9, should be 0xCC (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 0.192146] ACPI Error (dswload-0781)
> -klog : [_PSW] Namespace lookup failure, AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 0.192146] ACPI Error (dswload-0781):
> +klog [_PSW] Namespace lookup failure, AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.192182] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c08ce7dc),
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.192182] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [] (Node c08ce7dc),
> klog AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.192983] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - C0, should be B3
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.192983] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - C0, should be B3 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.193750] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c08ce7dc),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.193750] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node c08ce7dc), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.194184] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - C8, should be BF
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.194184] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - C8, should be BF (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.194314] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - AA, should be 9D
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.194314] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - AA, should be 9D (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.194554] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 0.194554] ACPI Error: Method parse
> klog /execution failed [_PR_.CPU1._PDC] (Node f5821150),
> klog AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.194701] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 0.194701] ACPI Error: Method parse
> klog /execution failed [_PR_.CPU2._PDC] (Node f58211e0),
> klog AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.194897] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xDD, should be 0xD6
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.194897] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xDD, should be 0xD6 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.195685] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 2A, should be 29
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.195685] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 2A, should be 29 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.195754] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 88, should be 83
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.195754] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 88, should be 83 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.196934] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0B, should be 02
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.196934] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0B, should be 02 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.197082] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0xC8, should be 0xE5
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.197082] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0xC8, should be 0xE5 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.197413] ACPI Error: No handler for
> klog Region [EC__] (f701c5c8) [EmbeddedControl] (20100428
> klog /evregion-369)
> @@ -4414,124 +4406,124 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.197451] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SBRG.EC__._REG]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.197451] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.SBRG.EC__._REG]
> klog (Node f701e2a0), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.198490] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xB2, should be 0x47
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.198490] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xB2, should be 0x47 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.198823] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 01, should be F4
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.198823] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 01, should be F4 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.199360] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 00, should be AB
> -klog 20090521 tbutils-246
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.199360] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 00, should be AB 20090521
> +klog tbutils-246
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.199465] ACPI Error: [CDW1] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110413/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.199465] ACPI Error: [CDW1] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110413/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.199471] ACPI Error: Method parse
> -klog /execution failed [_SB_._OSC] (Node ffff880138e2ea78),
> -klog AE_NOT_FOUND (20110413/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.199471] ACPI Error: Method parse/execution
> +klog failed [_SB_._OSC] (Node ffff880138e2ea78), AE_NOT_FOUND
> +klog (20110413/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.200426] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - A3, should be 9E
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.200426] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - A3, should be 9E (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.200744] ACPI Warning:
> -klog Incorrect checksum in table [ASF!] - 59, should be 08
> -klog 20090521 tbutils-246
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.200744] ACPI Warning: Incorrect
> +klog checksum in table [ASF!] - 59, should be 08 20090521
> +klog tbutils-246
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.201013] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 8A, should be 7D
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.201013] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 8A, should be 7D (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.201466] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 0.201466] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
> klog f700e180), AE_INVALID_TABLE_LENGTH
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.203079] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xE1, should be 0xDC
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.203079] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xE1, should be 0xDC (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.204335] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xC1, should be 0x11
> -klog (20110413/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.204335] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xC1, should be 0x11 (20110413
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.204344] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 07, should be 59
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.204344] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 07, should be 59 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.205365] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.205365] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f5422e88),
> klog AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -4539,79 +4531,79 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.206075] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - BB, should be E5
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.206075] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - BB, should be E5 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.207023] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 00, should be AB
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.207023] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 00, should be AB (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.208479] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x77, should be 0x72
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.208479] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x77, should be 0x72 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.209105] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> -klog f701f270), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.209105] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node f701f270),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.210543] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - CD, should be CC
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.210543] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - CD, should be CC (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.210667] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - D3, should be C4
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.210667] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - D3, should be C4 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.211069] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x99, should be 0x92
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.211069] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x99, should be 0x92 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.211113] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 7B, should be 76
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.211113] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 7B, should be 76 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.211904] ACPI Error: No handler for
> klog Region [ERAM] (ee422ed8) [EmbeddedControl] (20100428
> klog /evregion-369)
> @@ -4620,149 +4612,149 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.211928] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.211928] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f701fd08), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.211938] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.211938] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
> klog (Node ee423708), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.212633] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - E1, should be D3
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.212633] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - E1, should be D3 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.212815] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0._OSC] (Node f7424eb8),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.212815] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0._OSC] (Node f7424eb8), AE_NOT_FOUND
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 0.213084] ACPI Error (dsfield-0143)
> -klog : [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 0.213084] ACPI Error (dsfield-0143):
> +klog [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.213100] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.213100] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f7014ca8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.213771] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - EC, should be E7
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.213771] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - EC, should be E7 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.213827] ACPI Warning:
> -klog Package List length (0xC) larger than NumElements count
> -klog (0x3), truncated
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.213827] ACPI Warning: Package
> +klog List length (0xC) larger than NumElements count (0x3),
> +klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.214423] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - FD, should be EF
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.214423] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - FD, should be EF (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.215632] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x0B, should be 0x5B
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.215632] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x0B, should be 0x5B (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.216249] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x27, should be 0xE5
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.216249] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x27, should be 0xE5 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.217060] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.217060] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog dec13ca8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.217763] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.217763] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f7013030), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.217957] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 69, should be 5F
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.217957] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 69, should be 5F (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.218957] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.218957] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f701be88), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.219691] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> -klog f7013270), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.219691] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node f7013270),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.219959] ACPI Error: No handler for
> klog Region [SACS] (f70c52a8) [PCI_Config] (20090903
> klog /evregion-319)
> @@ -4771,25 +4763,25 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
> -klog message: [ 0.219968] ACPI Error: Region PCI_Config(2) has
> -klog no handler (20090903/exfldio-295)
> +klog FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
> +klog Kernel message: [ 0.219968] ACPI Error: Region
> +klog PCI_Config(2) has no handler (20090903/exfldio-295)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.219977] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.219977] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D0._STA] (Node
> klog f701ba38), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.220034] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.220034] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D0._STA] (Node f701ba38),
> klog AE_NOT_EXIST
> klog
> @@ -4797,17 +4789,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.220068] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.220068] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D1._STA] (Node
> klog f701baf8), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.220107] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.220107] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D1._STA] (Node f701baf8),
> klog AE_NOT_EXIST
> klog
> @@ -4815,17 +4807,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.220142] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.220142] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D0._STA] (Node
> klog f701bc78), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.220180] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.220180] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D0._STA] (Node f701bc78),
> klog AE_NOT_EXIST
> klog
> @@ -4833,17 +4825,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.220213] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.220213] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D1._STA] (Node
> klog f701bd38), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.220252] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.220252] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D1._STA] (Node f701bd38),
> klog AE_NOT_EXIST
> klog
> @@ -4851,25 +4843,25 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.221153] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.HPET._CRS] (Node f402ae70),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.221153] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.HPET._CRS] (Node f402ae70), AE_NOT_FOUND
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.221220] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.RTC_._CRS] (Node f402aee8),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.221220] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.RTC_._CRS] (Node f402aee8), AE_NOT_FOUND
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogMtrryourCPUsHadInconsistent: Test 1,
> +klog FAILED [MEDIUM] KlogBiosMtrrDefTypeIncosistent: Test 1,
> klog MEDIUM Kernel message: [ 0.221945] mtrr: your CPUs had
> klog inconsistent MTRRdefType settings
> klog
> @@ -4879,25 +4871,25 @@ klog consistently set across all CPUs which is a firmware bug.
> klog The kernel has worked around this bug, but it may be worth
> klog getting the BIOS vendor to fix this.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.222211] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.222211] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f701beb8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.222869] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - B0, should be 4A
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.222869] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - B0, should be 4A (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
> klog CRITICAL Kernel message: [ 0.222980] ACPI Error: Field
> klog [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits)
> klog (20090903/dsopcode-596)
> @@ -4906,41 +4898,41 @@ klog ADVICE: The field exceeds the allocated buffer size. This
> klog can lead to unexpected results when fetching data outside
> klog this region.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.222987] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS]
> -klog (Node f7015900), AE_AML_BUFFER_LIMIT
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.222987] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
> +klog f7015900), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.223020] ACPI Error (uteval-0250):
> -klog Method execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.223020] ACPI Error (uteval-0250): Method
> +klog execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
> klog f7015900), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.223245] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - DB, should be DA
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.223245] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - DB, should be DA (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
> -klog Test 1, MEDIUM Kernel message: [ 0.223485] [Firmware Bug]:
> -klog PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] not reserved
> -klog in ACPI motherboard resources
> +klog FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
> +klog MEDIUM Kernel message: [ 0.223485] [Firmware Bug]: PCI:
> +klog MMCONFIG at [mem 0xf0000000-0xf3ffffff] not reserved in
> +klog ACPI motherboard resources
> klog
> klog ADVICE: It appears that PCI config space has been
> klog configured for a specific device but does not appear to be
> klog reserved by the ACPI motherboard resources.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.224289] ACPI Warning for
> klog _SB_.PCI0.P32_._PRT: Return Package has no elements
> klog (empty) (20100428/nspredef-456)
> @@ -4949,16 +4941,16 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.224569] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.224569] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f701fca8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
> klog CRITICAL Kernel message: [ 0.224987] ACPI Error: Field
> klog [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits)
> klog (20100428/dsopcode-597)
> @@ -4967,266 +4959,266 @@ klog ADVICE: The field exceeds the allocated buffer size. This
> klog can lead to unexpected results when fetching data outside
> klog this region.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.224994] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.MEM_._CRS] (Node
> -klog f7021990), AE_AML_BUFFER_LIMIT
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.224994] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.MEM_._CRS] (Node f7021990),
> +klog AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.225018] ACPI Error (uteval-0250):
> -klog Method execution failed [_SB_.MEM_._CRS] (Node f7021990),
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.225018] ACPI Error (uteval-0250): Method
> +klog execution failed [_SB_.MEM_._CRS] (Node f7021990),
> klog AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.226224] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 53, should be 84
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.226224] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 53, should be 84 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.227129] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x11, should be 0xE5
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.227129] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x11, should be 0xE5 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.228032] ACPI Error (psargs-0359): [_PR_.C002._PPC]
> -klog Namespace lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.228032] ACPI Error (psargs-0359):
> +klog [_PR_.C002._PPC] Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.228041] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
> -klog (Node f742a558), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.228041] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
> +klog f742a558), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogFirmwareBug: Test 1, HIGH Kernel message
> -klog : [ 0.228469] [Firmware Bug]: the BIOS has corrupted
> -klog hw-PMU resources (MSR 38d is 30)
> +klog FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
> +klog message: [ 0.228469] [Firmware Bug]: the BIOS has
> +klog corrupted hw-PMU resources (MSR 38d is 30)
> klog
> klog ADVICE: The kernel has detected a Firmware bug in the BIOS
> klog or ACPI which needs investigating and fixing.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.228535] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 77, should be 6F
> -klog (20100121/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.228535] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 77, should be 6F (20100121
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.228773] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0._OSC] (Node f4025450),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.228773] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0._OSC] (Node f4025450), AE_NOT_FOUND
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.229334] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.229334] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f7020750), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.229639] ACPI Error (psargs-0359): [CDW1] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.229639] ACPI Error (psargs-0359): [CDW1]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.229644] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> -klog f7413270), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.229644] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node f7413270),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.230075] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.230075] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f7014630), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.231134] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> -klog f7012f00), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.231134] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node f7012f00),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.232350] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 15, should be 73
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.232350] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 15, should be 73 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.232460] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 8C, should be 87
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.232460] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 8C, should be 87 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.232733] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.232733] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f701ebd0), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.232830] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xC2, should be 0x84
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.232830] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xC2, should be 0x84 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.233493] ACPI Warning:
> -klog Incorrect checksum in table [GSCI] - 58, should be AA
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.233493] ACPI Warning: Incorrect
> +klog checksum in table [GSCI] - 58, should be AA (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.233542] ACPI Warning:
> -klog Incorrect checksum in table [GSCI] - 0x70, should be 0xD2
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.233542] ACPI Warning: Incorrect
> +klog checksum in table [GSCI] - 0x70, should be 0xD2 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.233946] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 1E, should be E5
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.233946] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 1E, should be E5 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.235518] ACPI Warning:
> -klog Incorrect checksum in table [ASF!] - D8, should be 6E
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.235518] ACPI Warning: Incorrect
> +klog checksum in table [ASF!] - D8, should be 6E (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.236465] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 1D, should be 10
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.236465] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 1D, should be 10 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.236739] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0._OSC] (Node f3c24f00),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.236739] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0._OSC] (Node f3c24f00), AE_NOT_FOUND
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.241360] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xBD, should be 0x89
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.241360] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xBD, should be 0x89 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.242473] ACPI Warning:
> -klog Incorrect checksum in table [GSCI] - 0x28, should be 0x8A
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.242473] ACPI Warning: Incorrect
> +klog checksum in table [GSCI] - 0x28, should be 0x8A (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.244995] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 17, should be 67
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.244995] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 17, should be 67 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 0.245794] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 0.245794] ACPI Warning for
> klog _SB_.PCI0.PCIB._PRT: Return type mismatch - found Integer,
> klog expected Package (20100428/nspredef-1053)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.245810] ACPI Error (uteval-0307): Return object type
> -klog is incorrect [_SB_.PCI0.PCIB._PRT] (Node f7022c48),
> -klog AE_TYPE
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.245810] ACPI Error (uteval-0307): Return
> +klog object type is incorrect [_SB_.PCI0.PCIB._PRT] (Node
> +klog f7022c48), AE_TYPE
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.245830] ACPI Error: Type returned from _PRT was
> -klog incorrect: Integer, expected Btypes: 0x8 (20100428
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.245830] ACPI Error: Type returned from _PRT
> +klog was incorrect: Integer, expected Btypes: 0x8 (20100428
> klog /uteval-313)
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -5234,61 +5226,61 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.246137] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - F1, should be E5
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.246137] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - F1, should be E5 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.249246] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 70, should be 6D
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.249246] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 70, should be 6D (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.249570] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.249570] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._OSC] (Node
> klog f7010198), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.249594] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.249594] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
> klog f7010180), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.249860] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU2._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.249860] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU2._OSC] (Node
> klog f7010270), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.249882] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU2._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.249882] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU2._PDC] (Node
> klog f7010258), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.250005] ACPI Error: No handler for
> klog Region [EC__] (f4424bd0) [EmbeddedControl] (20110112
> klog /evregion-369)
> @@ -5297,16 +5289,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
> -klog message: [ 0.250012] ACPI Error: Region
> +klog FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
> +klog Kernel message: [ 0.250012] ACPI Error: Region
> klog EmbeddedControl(0x3) has no handler (20110112/exfldio-292)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.250019] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.250019] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.SBRG.EC__._REG] (Node
> klog f4425bb8), AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -5314,26 +5306,26 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.250572] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.250572] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f7010e88), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.250864] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.250864] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f7013e58), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.250941] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.250941] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f4022e88),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -5341,7 +5333,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogFirmwareBugACPI: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
> klog message: [ 0.250986] [Firmware Bug]: ACPI: BIOS
> klog _OSI(Linux) query honored via DMI
> klog
> @@ -5349,17 +5341,17 @@ klog ADVICE: ACPI driver has detected an ACPI bug. This
> klog generally points to a bug in an ACPI table. Examine the
> klog kernel log for more details.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.251711] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - B0, should be E5
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.251711] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - B0, should be E5 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.254947] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.254947] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f3c22e88),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -5367,95 +5359,94 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.255884] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.255884] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f70142b8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.256141] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0xAF, should be 0x59
> -klog (20110413/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.256141] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0xAF, should be 0x59 (20110413
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.257910] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 04, should be 54
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.257910] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 04, should be 54 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.261013] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - DF, should be 2F
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.261013] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - DF, should be 2F (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.262586] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.262586] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f701f390), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogFirmwareBug: Test 1, HIGH Kernel message
> -klog : [ 0.262663] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint
> -klog LPC.BM_STS cleared
> +klog FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
> +klog message: [ 0.262663] pci 0000:00:1f.0: [Firmware Bug]:
> +klog TigerPoint LPC.BM_STS cleared
> klog
> klog ADVICE: The kernel has detected a Firmware bug in the BIOS
> klog or ACPI which needs investigating and fixing.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.264838] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.264838] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f701f2a0), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.265119] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c08d5804),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.265119] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node c08d5804), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.265541] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - E0, should be 30
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.265541] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - E0, should be 30 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.266577] ACPI Warning:
> -klog Incorrect checksum in table [GSCI] - 3B, should be BF
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.266577] ACPI Warning: Incorrect
> +klog checksum in table [GSCI] - 3B, should be BF (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 0.267893] ACPI Warning for
> klog _TZ_.TZ01._PSL: Return Package type mismatch at index 0 -
> klog found Processor, expected Reference (20090903
> @@ -5465,61 +5456,60 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.268093] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c0927024),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.268093] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node c0927024), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.268171] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c0927024),
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.268171] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [] (Node c0927024),
> klog AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.268458] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.268458] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f70142a0), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.269488] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_PR_.CPU1.APCT] (Node
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.269488] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1.APCT] (Node
> klog ffff88007af30560), AE_NO_MEMORY
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.269534] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_PR_.CPU1.GCAP] (Node
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.269534] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1.GCAP] (Node
> klog ffff88007af30540), AE_NO_MEMORY
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 0.269576] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_PR_.CPU1._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 0.269576] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
> klog ffff88007af30500), AE_NO_MEMORY
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.272427] ACPI Error: No handler for
> klog Region [SACS] (f71004d8) [PCI_Config] (20090903
> klog /evregion-319)
> @@ -5528,17 +5518,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.272435] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.272435] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D0._STA] (Node
> klog f7102150), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.272452] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.272452] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D0._STA] (Node f7102150),
> klog AE_NOT_EXIST
> klog
> @@ -5546,17 +5536,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.272469] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.272469] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D1._STA] (Node
> klog f71021f8), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.272486] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.272486] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D1._STA] (Node f71021f8),
> klog AE_NOT_EXIST
> klog
> @@ -5564,17 +5554,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.272503] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.272503] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D0._STA] (Node
> klog f7102360), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.272519] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.272519] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D0._STA] (Node f7102360),
> klog AE_NOT_EXIST
> klog
> @@ -5582,17 +5572,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.272536] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.272536] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D1._STA] (Node
> klog f7102408), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.272552] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.272552] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D1._STA] (Node f7102408),
> klog AE_NOT_EXIST
> klog
> @@ -5600,133 +5590,133 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.279154] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - B9, should be AE
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.279154] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - B9, should be AE (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.284552] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.IDE1.GTM_]
> -klog (Node f7014858), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 0.284552] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.IDE1.GTM_] (Node
> +klog f7014858), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.284566] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM]
> -klog (Node f7014798), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 0.284566] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM] (Node
> +klog f7014798), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.285468] ACPI Error (psargs-0359): [_PR_.CPU0._PPC]
> -klog Namespace lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.285468] ACPI Error (psargs-0359):
> +klog [_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.285476] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.ADP0.ADJP] (Node
> -klog f7015b10), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.285476] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.ADP0.ADJP] (Node f7015b10),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.285546] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.ADP0._PSR] (Node
> -klog f7015ae0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.285546] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.ADP0._PSR] (Node f7015ae0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.288180] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x81, should be 0x59
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.288180] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x81, should be 0x59 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.288591] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.288591] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f701fd50), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.288966] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0._OSC] (Node f34245b8),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.288966] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0._OSC] (Node f34245b8), AE_NOT_FOUND
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [CRITICAL] KlogFirmwareBugInvalidCriticalThreshold:
> -klog Test 1, CRITICAL Kernel message: [ 0.296054] [Firmware
> -klog Bug]: Invalid critical threshold (0)
> +klog FAILED [CRITICAL] KlogAcpiCrtInvalidThreshold: Test 1,
> +klog CRITICAL Kernel message: [ 0.296054] [Firmware Bug]:
> +klog Invalid critical threshold (0)
> klog
> klog ADVICE: ACPI _CRT (Critical Trip Point) is returning a
> klog threshold lower than zero degrees Celsius which is clearly
> klog incorrect.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.296149] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.296149] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f701eca8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.296644] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_._OSC] (Node
> -klog ffff88012fc16660), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.296644] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_._OSC] (Node ffff88012fc16660)
> +klog , AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.302946] ACPI Error (psargs-0359): [HPTF] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.302946] ACPI Error (psargs-0359): [HPTF]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.302952] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.HPET._STA]
> -klog (Node ffff88007db32200), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.302952] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.HPET._STA] (Node
> +klog ffff88007db32200), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.307009] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.307009] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f4c22e88),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -5734,70 +5724,70 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.307757] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM]
> -klog (Node f74145a0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.307757] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
> +klog f74145a0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.307837] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM]
> -klog (Node f7414690), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.307837] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
> +klog f7414690), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.308095] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 1F, should be 7F
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.308095] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 1F, should be 7F (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.308151] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM]
> -klog (Node f7414cd8), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.308151] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
> +klog f7414cd8), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.308213] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM]
> -klog (Node f7414dc8), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.308213] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
> +klog f7414dc8), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 0.310609] ACPI Warning for _PR_.CPU1._PSS:
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 0.310609] ACPI Warning for _PR_.CPU1._PSS:
> klog SubPackage[8,9] - suspicious power dissipation values
> klog (20100428/nsrepair2-403)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.310767] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x72, should be 0x6A
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.310767] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x72, should be 0x6A (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.311025] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.311025] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f4c250d8),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -5805,8 +5795,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.311041] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.311041] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f54250d8),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -5814,15 +5804,15 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 0.311335] ACPI Warning for _PR_.CPU2._PSS:
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 0.311335] ACPI Warning for _PR_.CPU2._PSS:
> klog SubPackage[8,9] - suspicious power dissipation values
> klog (20100428/nsrepair2-403)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorCouldNotEnable: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
> klog Kernel message: [ 0.311729] ACPI Error: Could not enable
> klog PowerButton event (20090903/evxfevnt-193)
> klog
> @@ -5830,7 +5820,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningCouldNotEnable: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiCannotEnableFixedEvent: Test 1, HIGH
> klog Kernel message: [ 0.311932] ACPI Warning: Could not enable
> klog fixed event 2 (20090903/evxface-146)
> klog
> @@ -5838,35 +5828,35 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.314160] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 91, should be 90
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.314160] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 91, should be 90 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.314451] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81a2b040)
> -klog , AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.314451] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [] (Node ffffffff81a2b040),
> +klog AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.314603] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 8B, should be 8A
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.314603] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 8B, should be 8A (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogMtrryourCPUsHadInconsistent: Test 1,
> -klog MEDIUM Kernel message: [ 0.314675] mtrr: your CPUs had
> +klog FAILED [MEDIUM] KlogBiosMtrrsInconsistentAcrossCPUs: Test
> +klog 1, MEDIUM Kernel message: [ 0.314675] mtrr: your CPUs had
> klog inconsistent variable MTRR settings
> klog
> klog ADVICE: The variable Memory Type Range Registers (MTRRs)
> @@ -5875,25 +5865,25 @@ klog across all CPUs which is a firmware bug. The kernel has
> klog worked around this bug, but it may be worth getting the
> klog BIOS vendor to fix this.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.316718] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 27, should be 22
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.316718] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 27, should be 22 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.316734] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xF3, should be 0xF2
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.316734] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xF3, should be 0xF2 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.316816] ACPI Error: No handler for
> klog Region [ERAM] (ffff88007a733d80) [EmbeddedControl]
> klog (20110112/evregion-369)
> @@ -5902,8 +5892,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.316829] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.316829] ACPI Error: Method parse
> klog /execution failed [_SB_.HTEV] (Node ffff88007a730780),
> klog AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -5911,8 +5901,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.316839] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.316839] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
> klog ffff88007a73a078), AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -5920,69 +5910,68 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.317152] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - C1, should be B4
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.317152] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - C1, should be B4 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.317427] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.317427] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
> klog ffff88007d735160), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.317685] ACPI Warning:
> -klog Incorrect checksum in table [ASF!] - 0xFC, should be 0x98
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.317685] ACPI Warning: Incorrect
> +klog checksum in table [ASF!] - 0xFC, should be 0x98 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.319223] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - E7, should be E2
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.319223] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - E7, should be E2 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.321587] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81a12040)
> -klog , AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.321587] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node ffffffff81a12040),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
> -klog HIGH Kernel message: [ 0.321722] ACPI Error: Needed type
> -klog [Reference], found [Device] ffff88007552b900 (20100428
> -klog /exresop-104)
> +klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
> +klog message: [ 0.321722] ACPI Error: Needed type [Reference],
> +klog found [Device] ffff88007552b900 (20100428/exresop-104)
> klog
> klog ADVICE: An ACPI Method has returned an Device type when a
> klog Reference type was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.321740] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 0.321740] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff880075532ba0), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.322869] ACPI Error: No handler for
> klog Region [RAM_] (f7425690) [EmbeddedControl] (20110112
> klog /evregion-369)
> @@ -5991,8 +5980,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.322886] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.322886] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.LPCB.SNC_.SBRT] (Node
> klog f7435228), AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -6000,8 +5989,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.322899] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.322899] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
> klog f7428d98), AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -6009,24 +5998,24 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.323465] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x8D, should be 0x8C
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.323465] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x8D, should be 0x8C (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.323777] ACPI Warning:
> -klog Package List length (0xC) larger than NumElements count
> -klog (0x4), truncated
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.323777] ACPI Warning: Package
> +klog List length (0xC) larger than NumElements count (0x4),
> +klog truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.325321] ACPI Error: No handler for
> klog Region [ERAM] (ffff88007d32bf78) [EmbeddedControl]
> klog (20090903/evregion-319)
> @@ -6035,43 +6024,43 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.325334] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.KBC0.SMWR]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.325334] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.LPCB.KBC0.SMWR]
> klog (Node ffff88007d32c8c0), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.325357] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_TZ_.THRM.SFAN] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.325357] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_TZ_.THRM.SFAN] (Node
> klog ffff88007d328ec0), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.325376] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_TZ_.THRM.THCK] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.325376] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_TZ_.THRM.THCK] (Node
> klog ffff88007d328f40), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.325396] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_GPE._L02] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.325396] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_GPE._L02] (Node
> klog ffff88007d3289c0), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorCouldNotEnable: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
> klog Kernel message: [ 0.325630] ACPI Error: Could not enable
> klog SleepButton event (20100428/evxfevnt-202)
> klog
> @@ -6079,7 +6068,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningCouldNotEnable: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiCannotEnableFixedEvent: Test 1, HIGH
> klog Kernel message: [ 0.325636] ACPI Warning: Could not enable
> klog fixed event 0x3 (20100428/evxface-146)
> klog
> @@ -6087,77 +6076,77 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.328929] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x45, should be 0x40
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.328929] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x45, should be 0x40 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.328954] ACPI Warning:
> -klog Incorrect checksum in table [ASF!] - D9, should be 6D
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.328954] ACPI Warning: Incorrect
> +klog checksum in table [ASF!] - D9, should be 6D (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 0.329218] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 0.329218] ACPI Warning for
> klog _SB_.PCI0._OSC: Return type mismatch - found Integer,
> klog expected Buffer (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 0.329373] ACPI Error (dsfield-0143)
> -klog : [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 0.329373] ACPI Error (dsfield-0143):
> +klog [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.329378] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.329378] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff88012b63d760), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.330000] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0xD1, should be 0x75
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.330000] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0xD1, should be 0x75 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.330140] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0xE3, should be 0xDC
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.330140] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0xE3, should be 0xDC (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.330280] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - DE, should be D9
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.330280] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - DE, should be D9 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.330488] ACPI Error: No handler for
> klog Region [SACS] (ffff88011bf101f8) [PCI_Config] (20090903
> klog /evregion-319)
> @@ -6166,17 +6155,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.330496] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.330496] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D0._STA] (Node
> klog ffff88011bf0d360), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.330513] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.330513] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D0._STA] (Node
> klog ffff88011bf0d360), AE_NOT_EXIST
> klog
> @@ -6184,17 +6173,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.330528] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.330528] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D1._STA] (Node
> klog ffff88011bf0d460), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.330545] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.330545] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D1._STA] (Node
> klog ffff88011bf0d460), AE_NOT_EXIST
> klog
> @@ -6202,17 +6191,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.330560] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.330560] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D0._STA] (Node
> klog ffff88011bf0d660), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.330576] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.330576] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D0._STA] (Node
> klog ffff88011bf0d660), AE_NOT_EXIST
> klog
> @@ -6220,17 +6209,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.330590] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.330590] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D1._STA] (Node
> klog ffff88011bf0d760), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.330606] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.330606] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D1._STA] (Node
> klog ffff88011bf0d760), AE_NOT_EXIST
> klog
> @@ -6238,95 +6227,93 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.330759] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.330759] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff88011763c000), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.330793] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0x9A
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.330793] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0x9A (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
> -klog HIGH Kernel message: [ 0.331637] ACPI Error: Needed type
> -klog [Reference], found [Device] ffff88014b82d820 (20090903
> -klog /exresop-104)
> +klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
> +klog message: [ 0.331637] ACPI Error: Needed type [Reference],
> +klog found [Device] ffff88014b82d820 (20090903/exresop-104)
> klog
> klog ADVICE: An ACPI Method has returned an Device type when a
> klog Reference type was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.331653] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 0.331653] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff88014b83cac0), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
> -klog HIGH Kernel message: [ 0.331820] ACPI Error: Needed type
> -klog [Reference], found [Device] ffff8800379aa900 (20100428
> -klog /exresop-104)
> +klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
> +klog message: [ 0.331820] ACPI Error: Needed type [Reference],
> +klog found [Device] ffff8800379aa900 (20100428/exresop-104)
> klog
> klog ADVICE: An ACPI Method has returned an Device type when a
> klog Reference type was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.331838] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 0.331838] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff8800379bbba0), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.331948] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0C, should be 0B
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.331948] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0C, should be 0B (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.332160] ACPI Error (dswload-0677): [PCI0] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.332160] ACPI Error (dswload-0677): [PCI0]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.332167] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81cf5eb0)
> -klog , AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.332167] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node ffffffff81cf5eb0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.333155] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 4A, should be D9
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.333155] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 4A, should be D9 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.333287] ACPI Error: No handler for
> klog Region [ERAM] (ffff8800bc638d80) [EmbeddedControl]
> klog (20090903/evregion-319)
> @@ -6335,25 +6322,25 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.333300] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.HTEV] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.333300] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.HTEV] (Node
> klog ffff8800bc62e600), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.333326] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.333326] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
> klog (Node ffff8800bc63e9a0), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.333559] ACPI Error: No handler for
> klog Region [ERAM] (ffff88007db2ad80) [EmbeddedControl]
> klog (20090903/evregion-319)
> @@ -6362,35 +6349,35 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.333573] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.HTEV] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.333573] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.HTEV] (Node
> klog ffff88007db28600), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.333591] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xF4, should be 0xF3
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.333591] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xF4, should be 0xF3 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.333601] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.333601] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
> klog (Node ffff88007db309a0), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningParameterCountMismatch: Test
> -klog 1, HIGH Kernel message: [ 0.333734] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
> +klog HIGH Kernel message: [ 0.333734] ACPI Warning for
> klog _SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5,
> klog ACPI requires 4 (20090903/nspredef-336)
> klog
> @@ -6398,52 +6385,52 @@ klog ADVICE: The ACPI Method was executing with a different
> klog number of parameters than the Method expected. This should
> klog be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.333765] ACPI Error (psargs-0359): [FZHD] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.333765] ACPI Error (psargs-0359): [FZHD]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.333771] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM]
> -klog (Node f7014300), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.333771] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
> +klog f7014300), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.333853] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM]
> -klog (Node f70143f0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.333853] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
> +klog f70143f0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.334143] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM]
> -klog (Node f7014a38), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.334143] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
> +klog f7014a38), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.334206] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM]
> -klog (Node f7014b28), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.334206] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
> +klog f7014b28), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.335658] ACPI Error: No handler for
> klog Region [ECOR] (ffff88007af355e8) [EmbeddedControl]
> klog (20110413/evregion-373)
> @@ -6452,8 +6439,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.335698] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.335698] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
> klog ffff88007af36730), AE_NOT_EXIST (20110413/psparse-536)
> klog
> @@ -6461,26 +6448,26 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.335745] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 80, should be 78
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.335745] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 80, should be 78 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.337368] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 8B, should be 86
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.337368] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 8B, should be 86 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.337513] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.337513] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f54243f0),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -6488,34 +6475,34 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.337662] ACPI Error (psargs-0359): [URES] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.337662] ACPI Error (psargs-0359): [URES]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.337662] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PSW] (Node f701f0a8),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.337662] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PSW] (Node f701f0a8),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.338155] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.338155] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff88021302db60), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.338440] ACPI Error: No handler for
> klog Region [SACS] (ffff88012bb0f1f8) [PCI_Config] (20090903
> klog /evregion-319)
> @@ -6524,26 +6511,26 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.338717] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.338717] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D0._STA] (Node
> klog ffff88012bb111a0), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.338801] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 8B, should be 7E
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.338801] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 8B, should be 7E (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.338905] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.338905] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D0._STA] (Node
> klog ffff88012bb111a0), AE_NOT_EXIST
> klog
> @@ -6551,17 +6538,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.339363] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PRID.P_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.339363] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [PRID.P_D1._STA] (Node
> klog ffff88012bb11280), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.339551] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.339551] ACPI Error (uteval-0250):
> klog Method execution failed [PRID.P_D1._STA] (Node
> klog ffff88012bb11280), AE_NOT_EXIST
> klog
> @@ -6569,53 +6556,53 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.339584] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xE2, should be 0xD5
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.339584] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xE2, should be 0xD5 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.339628] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 91, should be 88
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.339628] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 91, should be 88 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.339857] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 6D, should be 60
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.339857] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 6D, should be 60 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.340003] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D0._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.340003] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D0._STA] (Node
> klog ffff88012bb11460), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.340121] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x1B, should be 0xE5
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.340121] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x1B, should be 0xE5 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.340193] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.340193] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D0._STA] (Node
> klog ffff88012bb11460), AE_NOT_EXIST
> klog
> @@ -6623,17 +6610,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.340651] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SECD.S_D1._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.340651] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [SECD.S_D1._STA] (Node
> klog ffff88012bb11540), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.340838] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.340838] ACPI Error (uteval-0250):
> klog Method execution failed [SECD.S_D1._STA] (Node
> klog ffff88012bb11540), AE_NOT_EXIST
> klog
> @@ -6641,16 +6628,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.341276] ACPI Warning:
> -klog Incorrect checksum in table [ASF!] - F2, should be 8D
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.341276] ACPI Warning: Incorrect
> +klog checksum in table [ASF!] - F2, should be 8D (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.341759] ACPI Error: No handler for
> klog Region [RAM_] (f74212f8) [EmbeddedControl] (20100428
> klog /evregion-369)
> @@ -6659,106 +6646,106 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.341812] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.341812] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._OSC] (Node
> klog ffff88017bc14660), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.341843] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.341843] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
> klog ffff88017bc14640), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.342116] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.342116] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
> klog (Node f742f228), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.342130] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU2._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.342130] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU2._OSC] (Node
> klog ffff88017bc14780), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.342160] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU2._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.342160] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU2._PDC] (Node
> klog ffff88017bc14760), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.342409] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.342409] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> klog (Node f7422d98), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.342985] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 18, should be 13
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.342985] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 18, should be 13 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.343577] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xD1, should be 0xCA
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.343577] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xD1, should be 0xCA (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.344373] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - C5, should be B8
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.344373] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - C5, should be B8 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.345244] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xA5, should be 0x9C
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.345244] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xA5, should be 0x9C (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.346079] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 7A, should be 71
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.346079] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 7A, should be 71 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 0.347557] ACPI Warning for
> klog _TZ_.THRM._PSL: Return Package type mismatch at index 0 -
> klog found [NULL Object Descriptor], expected Reference
> @@ -6768,88 +6755,88 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.347883] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 5C, should be 53
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.347883] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 5C, should be 53 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.348936] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x56, should be 0x49
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.348936] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x56, should be 0x49 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.349163] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - E7, should be DA
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.349163] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - E7, should be DA (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.350013] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - D3, should be C6
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.350013] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - D3, should be C6 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.350096] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 13, should be 53
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.350096] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 13, should be 53 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.350158] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x13, should be 0xC8
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.350158] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x13, should be 0xC8 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.350335] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0x83, should be 0x37
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.350335] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0x83, should be 0x37 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.350784] ACPI Warning:
> -klog Incorrect checksum in table [iEIT] - 0x5C, should be 0x51
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.350784] ACPI Warning: Incorrect
> +klog checksum in table [iEIT] - 0x5C, should be 0x51 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.351065] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0x04, should be 0xCA
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.351065] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0x04, should be 0xCA (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.353198] ACPI Error: No handler for
> klog Region [ERAM] (ffff88013be53e10) [EmbeddedControl]
> klog (20090903/evregion-319)
> @@ -6858,61 +6845,60 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.353215] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.353215] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
> klog (Node ffff88013be520e0), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.353356] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x05, should be 0x36
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.353356] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x05, should be 0x36 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 0.353401] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 0.353401] ACPI Warning for
> klog _SB_.LATA._CRS: Return type mismatch - found Integer,
> klog expected Buffer (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.353406] ACPI Error (uteval-0307): Return object type
> -klog is incorrect [_SB_.LATA._CRS] (Node ffff88006df2eb00),
> -klog AE_TYPE
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.353406] ACPI Error (uteval-0307): Return
> +klog object type is incorrect [_SB_.LATA._CRS] (Node
> +klog ffff88006df2eb00), AE_TYPE
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
> -klog HIGH Kernel message: [ 0.353652] ACPI Error: Needed type
> -klog [Reference], found [Device] ffff8800379a6800 (20090903
> -klog /exresop-104)
> +klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
> +klog message: [ 0.353652] ACPI Error: Needed type [Reference],
> +klog found [Device] ffff8800379a6800 (20090903/exresop-104)
> klog
> klog ADVICE: An ACPI Method has returned an Device type when a
> klog Reference type was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.353652] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 0.353652] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff8800379bba80), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.355135] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.355135] ACPI Error: Method parse
> klog /execution failed [_PR_.CPU0._PDC] (Node ffff88007a738ca8)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -6920,9 +6906,9 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.355798] ACPI Error: ACPI path has too many parent
> -klog prefixes (^) - reached beyond root node (20090903
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.355798] ACPI Error: ACPI path has too many
> +klog parent prefixes (^) - reached beyond root node (20090903
> klog /nsaccess-429)
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -6930,9 +6916,9 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogBIOSBugtimerNotConnected: Test 1, HIGH
> -klog Kernel message: [ 0.356001] ..MP-BIOS bug: 8254 timer not
> -klog connected to IO-APIC
> +klog FAILED [HIGH] KlogBiosTimerNotConnectedtoIoApic: Test 1,
> +klog HIGH Kernel message: [ 0.356001] ..MP-BIOS bug: 8254 timer
> +klog not connected to IO-APIC
> klog
> klog ADVICE: The BIOS is reporting the ExtINTA I/O APIC input
> klog from the cascaded 8259A as the timer interrupt input. The
> @@ -6940,7 +6926,7 @@ klog kernel has detected just one pin, so it has to check the
> klog timer directly and through the 8259A because of the broken
> klog BIOS reporting.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.356108] ACPI Error: No handler for
> klog Region [ECF2] (ffff88013ba313a8) [EmbeddedControl]
> klog (20090903/evregion-319)
> @@ -6949,107 +6935,107 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
> -klog message: [ 0.356113] ACPI Error: Region EmbeddedControl(3)
> -klog has no handler (20090903/exfldio-295)
> +klog FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
> +klog Kernel message: [ 0.356113] ACPI Error: Region
> +klog EmbeddedControl(3) has no handler (20090903/exfldio-295)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.356119] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [P8XH] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.356119] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [P8XH] (Node
> klog ffff88013ba28020), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.356143] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_GPE._L02] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.356143] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_GPE._L02] (Node
> klog ffff88013ba32120), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.356280] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x33, should be 0xD7
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.356280] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x33, should be 0xD7 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.356754] ACPI Warning:
> -klog Incorrect checksum in table [ASF!] - ED, should be 83
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.356754] ACPI Warning: Incorrect
> +klog checksum in table [ASF!] - ED, should be 83 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.357018] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xA6, should be 0xA1
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.357018] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xA6, should be 0xA1 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.357902] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0xE9, should be 0xFE
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.357902] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0xE9, should be 0xFE (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.358086] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x11, should be 0x10
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.358086] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x11, should be 0x10 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.359183] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.359183] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f7021a68), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.359915] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x7D, should be 0x59
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.359915] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x7D, should be 0x59 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.360335] ACPI Warning:
> -klog Incorrect checksum in table [GSCI] - 0x28, should be 0xD4
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.360335] ACPI Warning: Incorrect
> +klog checksum in table [GSCI] - 0x28, should be 0xD4 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.361596] ACPI Error: ACPI path has too many parent
> -klog prefixes (^) - reached beyond root node (20100428
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.361596] ACPI Error: ACPI path has too many
> +klog parent prefixes (^) - reached beyond root node (20100428
> klog /nsaccess-429)
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -7057,34 +7043,33 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.362481] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c091bffc),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.362481] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node c091bffc), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.362557] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c091bffc),
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.362557] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [] (Node c091bffc),
> klog AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 0.362606] ACPI Error (dsfield-0487)
> -klog : [SMIC] Namespace lookup failure, AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 0.362606] ACPI Error (dsfield-0487):
> +klog [SMIC] Namespace lookup failure, AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.362751] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.362751] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f40255d0),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -7092,7 +7077,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogFirmwareBugACPI: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
> klog message: [ 0.362859] [Firmware Bug]: ACPI: BIOS
> klog _OSI(Linux) query honored via cmdline
> klog
> @@ -7100,60 +7085,60 @@ klog ADVICE: ACPI driver has detected an ACPI bug. This
> klog generally points to a bug in an ACPI table. Examine the
> klog kernel log for more details.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 0.362870] ACPI Error (dsfield-0140)
> -klog : [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 0.362870] ACPI Error (dsfield-0140):
> +klog [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.362886] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.362886] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f7014a80), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.363488] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.363488] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
> klog ffff880227048f60), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.363621] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 3C, should be 3B
> -klog 20090521 tbutils-246
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.363621] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 3C, should be 3B 20090521
> +klog tbutils-246
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.363728] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 75, should be 74
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.363728] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 75, should be 74 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.363981] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - BB, should be AE
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.363981] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - BB, should be AE (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.364356] ACPI Warning: For
> klog _SB_.PCI0.P2P_._PRT: Return Package has no elements
> klog (empty) (20110112/nspredef-456)
> @@ -7162,8 +7147,8 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.364521] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.364521] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f44285b8),
> klog AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -7171,71 +7156,71 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.366917] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - BD, should be B6
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.366917] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - BD, should be B6 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.367185] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - B2, should be A5
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.367185] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - B2, should be A5 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.367524] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0xAA, should be 0x59
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.367524] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0xAA, should be 0x59 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.368838] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 23, should be 1E
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.368838] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 23, should be 1E (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.369986] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x61, should be 0x58
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.369986] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x61, should be 0x58 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.370263] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x73, should be 0xE5
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.370263] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x73, should be 0xE5 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.371572] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0xFB, should be 0xE5
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.371572] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0xFB, should be 0xE5 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.372475] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.372475] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f5426ca8),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -7243,8 +7228,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.372684] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.372684] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node dd825ca8),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -7252,44 +7237,42 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.375383] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x90, should be 0x83
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.375383] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x90, should be 0x83 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.375585] ACPI Error (dswload-0677): [USB0] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.375585] ACPI Error (dswload-0677): [USB0]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.375609] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c09fb6c8),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.375609] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node c09fb6c8), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.375966] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node c0992f7c),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.375966] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node c0992f7c), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.376047] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.376047] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node dd825ca8),
> klog AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -7297,7 +7280,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.376092] ACPI Error: No handler for
> klog Region [ECXP] (ffff88007cf31ab0) [EmbeddedControl]
> klog (20100428/evregion-369)
> @@ -7306,26 +7289,26 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.376106] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.376106] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU0._OSC] (Node
> klog ffff88007cf3f440), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.376141] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.376141] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU0._PDC] (Node
> klog ffff88007cf3f420), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.376733] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.376733] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f5026ca8),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -7333,160 +7316,160 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.378931] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 33, should be 2C
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.378931] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 33, should be 2C (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.379815] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - D5, should be 3E
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.379815] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - D5, should be 3E (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.380609] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 8C, should be DC
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.380609] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 8C, should be DC (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.381039] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.381039] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f7016a38), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.381211] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 8E, should be 89
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.381211] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 8E, should be 89 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
> -klog Test 1, MEDIUM Kernel message: [ 0.381478] [Firmware Bug]:
> -klog PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] not reserved
> -klog in ACPI motherboard resources
> +klog FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
> +klog MEDIUM Kernel message: [ 0.381478] [Firmware Bug]: PCI:
> +klog MMCONFIG at [mem 0xe0000000-0xe06fffff] not reserved in
> +klog ACPI motherboard resources
> klog
> klog ADVICE: It appears that PCI config space has been
> klog configured for a specific device but does not appear to be
> klog reserved by the ACPI motherboard resources.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.382740] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_._OSC] (Node
> -klog ffff88003f013ca0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.382740] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_._OSC] (Node ffff88003f013ca0)
> +klog , AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.383518] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x0F, should be 0xE7
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.383518] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x0F, should be 0xE7 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.384684] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x4E, should be 0x3F
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.384684] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x4E, should be 0x3F (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.384722] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.HPET._CRS]
> -klog (Node ffff88007db32220), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.384722] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.HPET._CRS] (Node
> +klog ffff88007db32220), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.384811] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.RTC_._CRS]
> -klog (Node ffff88007db322c0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.384811] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.RTC_._CRS] (Node
> +klog ffff88007db322c0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.385777] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 00, should be 89
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.385777] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 00, should be 89 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.388556] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 6A, should be E5
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.388556] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 6A, should be E5 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.388736] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 8C, should be 83
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.388736] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 8C, should be 83 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.390341] ACPI Error: [GUR_._BAS] Namespace lookup
> -klog failure, AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.390341] ACPI Error: [GUR_._BAS] Namespace
> +klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.390354] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.MBIO._CRS] (Node
> -klog ffff880078f30aa0), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.390354] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.MBIO._CRS] (Node ffff880078f30aa0),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
> -klog Test 1, MEDIUM Kernel message: [ 0.390975] [Firmware Bug]:
> -klog PCI: MMCONFIG at [mem 0xe0000000-0xe08fffff] not reserved
> -klog in ACPI motherboard resources
> +klog FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
> +klog MEDIUM Kernel message: [ 0.390975] [Firmware Bug]: PCI:
> +klog MMCONFIG at [mem 0xe0000000-0xe08fffff] not reserved in
> +klog ACPI motherboard resources
> klog
> klog ADVICE: It appears that PCI config space has been
> klog configured for a specific device but does not appear to be
> klog reserved by the ACPI motherboard resources.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.393086] ACPI Warning: For
> klog _TZ_.THRM._PSL: Return Package has no elements (empty)
> klog (20110413/nspredef-456)
> @@ -7495,16 +7478,16 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.395834] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.395834] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff88013ba393a0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugACPIInvalidBIOS: Test 1,
> +klog FAILED [MEDIUM] KlogAcpiInvalidPssFrequency: Test 1,
> klog MEDIUM Kernel message: [ 0.396197] [Firmware Bug]: ACPI:
> klog Invalid BIOS _PSS frequency: 0x0 MHz
> klog
> @@ -7512,43 +7495,43 @@ klog ADVICE: _PSS (Performance Supported States) package has an
> klog incorrectly define core frequency (first DWORD entry in
> klog the _PSS package).
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.396945] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 00, should be 96
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.396945] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 00, should be 96 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.397644] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - F9, should be E5
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.397644] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - F9, should be E5 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.398231] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 12, should be 07
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.398231] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 12, should be 07 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.398290] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 01, should be 23
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.398290] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 01, should be 23 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
> klog CRITICAL Kernel message: [ 0.399990] ACPI Error: Field
> klog [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits)
> klog (20110112/dsopcode-597)
> @@ -7557,78 +7540,78 @@ klog ADVICE: The field exceeds the allocated buffer size. This
> klog can lead to unexpected results when fetching data outside
> klog this region.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.399996] ACPI Error: Method parse
> -klog /execution failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000)
> -klog , AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.399996] ACPI Error: Method parse/execution
> +klog failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000),
> +klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.400012] ACPI Error: Method
> -klog execution failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000),
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.400012] ACPI Error: Method execution failed
> +klog [_SB_.MEM_._CRS] (Node ffff8800b8e38000),
> klog AE_AML_BUFFER_LIMIT (20110112/uteval-103)
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.400212] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0x88
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.400212] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0x88 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.401117] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0F, should be E7
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.401117] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0F, should be E7 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.404616] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - A5, should be A0
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.404616] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - A5, should be A0 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.406016] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.ADP0.ADJP] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.406016] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.ADP0.ADJP] (Node
> klog ffff88013ba3c5a0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.406038] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.ADP0._PSR] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.406038] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.ADP0._PSR] (Node
> klog ffff88013ba3c560), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.407719] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 72, should be 69
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.407719] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 72, should be 69 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.408529] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.408529] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f4c285b8),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -7636,16 +7619,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.414781] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - CD, should be C8
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.414781] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - CD, should be C8 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 0.415975] ACPI Warning for
> klog _TZ_.THRM._PSL: Return Package type mismatch at index 0 -
> klog found [NULL Object Descriptor], expected Reference
> @@ -7655,26 +7638,25 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.418105] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 76, should be FE
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.418105] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 76, should be FE (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 0.420210] ACPI Error: [CAPD]
> -klog Namespace lookup failure, AE_ALREADY_EXISTS (20110413
> -klog /dsfield-143)
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 0.420210] ACPI Error: [CAPD] Namespace
> +klog lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.420218] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.420218] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node ffff88022b749b18)
> klog , AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -7682,7 +7664,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
> klog CRITICAL Kernel message: [ 0.420241] ACPI Error: Field
> klog [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits)
> klog (20100428/dsopcode-597)
> @@ -7691,40 +7673,40 @@ klog ADVICE: The field exceeds the allocated buffer size. This
> klog can lead to unexpected results when fetching data outside
> klog this region.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.420248] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS]
> -klog (Node ffff88013142fac0), AE_AML_BUFFER_LIMIT
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.420248] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
> +klog ffff88013142fac0), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.420284] ACPI Error (uteval-0250):
> -klog Method execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.420284] ACPI Error (uteval-0250): Method
> +klog execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
> klog ffff88013142fac0), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.420323] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0xC3, should be 0x59
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.420323] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0xC3, should be 0x59 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
> -klog Test 1, HIGH Kernel message: [ 0.422032] ACPI Warning
> +klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
> +klog 1, HIGH Kernel message: [ 0.422032] ACPI Warning
> klog (dsobject-0501): Package List length (6) larger than
> klog NumElements count (3), truncated
> klog
> klog ADVICE: A Method has returned a Package List that was
> klog larger than expected.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.424909] ACPI Warning for
> klog _SB_.PCI0.P2P_._PRT: Return Package has no elements
> klog (empty) (20100428/nspredef-456)
> @@ -7733,76 +7715,78 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.426823] ACPI Error (psargs-0359): [_PR_.CPU0._PSS]
> -klog Namespace lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.426823] ACPI Error (psargs-0359):
> +klog [_PR_.CPU0._PSS] Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.426833] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.AC__.ADJP] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.426833] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.AC__.ADJP] (Node
> klog ffff88007b32ee00), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.426872] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.AC__._PSR] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.426872] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.AC__._PSR] (Node
> klog ffff88007b32edc0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 0.429245] ACPI Warning for _PR_.CPU0._TSD: Incorrectly
> -klog formed Package, attempting repair (20090903/nsrepair-200)
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 0.429245] ACPI Warning for _PR_.CPU0._TSD:
> +klog Incorrectly formed Package, attempting repair (20090903
> +klog /nsrepair-200)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 0.430887] ACPI Warning for _PR_.CPU1._TSD: Incorrectly
> -klog formed Package, attempting repair (20090903/nsrepair-200)
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 0.430887] ACPI Warning for _PR_.CPU1._TSD:
> +klog Incorrectly formed Package, attempting repair (20090903
> +klog /nsrepair-200)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.434593] ACPI Warning:
> -klog Incorrect checksum in table [GSCI] - D2, should be A5
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.434593] ACPI Warning: Incorrect
> +klog checksum in table [GSCI] - D2, should be A5 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.436921] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.436921] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff88013b62ccc0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.438019] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - C8, should be E5
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.438019] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - C8, should be E5 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningParameterCountMismatch: Test
> -klog 1, HIGH Kernel message: [ 0.440405] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
> +klog HIGH Kernel message: [ 0.440405] ACPI Warning for
> klog _SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5,
> klog ACPI requires 4 (20100428/nspredef-352)
> klog
> @@ -7810,17 +7794,17 @@ klog ADVICE: The ACPI Method was executing with a different
> klog number of parameters than the Method expected. This should
> klog be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.441805] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - B2, should be B1
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.441805] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - B2, should be B1 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.444897] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.444897] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f4c252a0),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -7828,17 +7812,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.450562] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0._OSC] (Node ffff8800b8e33ca8)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.450562] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0._OSC] (Node ffff8800b8e33ca8),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.451517] ACPI Error (psargs-0359): [GUR_._BAS]
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.451517] ACPI Error (psargs-0359): [GUR_._BAS]
> klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -7846,16 +7830,16 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.451682] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.MBIO._CRS]
> -klog (Node ffff88007bb2a880), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.451682] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.MBIO._CRS] (Node
> +klog ffff88007bb2a880), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 0.453111] ACPI Warning for
> klog _SB_.BAT1._BIF: Return Package type mismatch at index 12 -
> klog found Integer, expected String/Buffer (20090903
> @@ -7865,7 +7849,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 0.454555] ACPI Warning for
> klog _PR_.CPU0._PSS: Return Package type mismatch at index 3 -
> klog found Integer, expected Package (20100428/nspredef-1059)
> @@ -7874,7 +7858,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 0.454838] ACPI Warning for
> klog _PR_.CPU1._PSS: Return Package type mismatch at index 3 -
> klog found Integer, expected Package (20100428/nspredef-1059)
> @@ -7883,25 +7867,25 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.455674] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 83, should be 7F
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.455674] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 83, should be 7F (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.459126] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 4C, should be 12
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.459126] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 4C, should be 12 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.460622] ACPI Warning: For
> klog _SB_.PCI0.P32_._PRT: Return Package has no elements
> klog (empty) (20110112/nspredef-456)
> @@ -7910,17 +7894,16 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 0.461767] ACPI Error: [CAPB]
> -klog Namespace lookup failure, AE_ALREADY_EXISTS (20110413
> -klog /dsfield-143)
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 0.461767] ACPI Error: [CAPB] Namespace
> +klog lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.461793] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.461793] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node ffff88003cdb0f00)
> klog , AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -7928,80 +7911,80 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.462573] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 95, should be 5E
> -klog 20090521 tbutils-246
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.462573] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 95, should be 5E 20090521
> +klog tbutils-246
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.468216] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._CST] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.468216] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU1._CST] (Node
> klog ffff88007c5cc380), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.468859] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.468859] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff88003f1afdc0), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.475076] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM]
> -klog (Node f701eb28), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.475076] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
> +klog f701eb28), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.475159] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM]
> -klog (Node f701ec18), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.475159] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
> +klog f701ec18), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.475441] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM]
> -klog (Node f70202a0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.475441] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
> +klog f70202a0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.475506] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM]
> -klog (Node f7020390), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.475506] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
> +klog f7020390), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.479385] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0x88
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.479385] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0x88 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.479821] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.479821] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f3c28a68),
> klog AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -8009,8 +7992,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.481067] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.481067] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f4028a68),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8018,8 +8001,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.482955] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.482955] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9b0f00)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8027,8 +8010,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.484974] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.484974] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f3c28a68),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8036,7 +8019,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 0.485955] ACPI Warning: For
> klog _TZ_.THRM._PSL: Return Package type mismatch at index 0 -
> klog found [NULL Object Descriptor], expected Reference
> @@ -8046,35 +8029,35 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.487180] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x33, should be 0x32
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.487180] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x33, should be 0x32 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.487365] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x99, should be 0x98
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.487365] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x99, should be 0x98 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.490256] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x22, should be 0x53
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.490256] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x22, should be 0x53 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningParameterCountMismatch: Test
> -klog 1, HIGH Kernel message: [ 0.490491] ACPI Warning: For
> +klog FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
> +klog HIGH Kernel message: [ 0.490491] ACPI Warning: For
> klog _SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5,
> klog ACPI requires 4 (20110413/nspredef-352)
> klog
> @@ -8082,43 +8065,43 @@ klog ADVICE: The ACPI Method was executing with a different
> klog number of parameters than the Method expected. This should
> klog be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.491491] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0x4A, should be 0xD9
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.491491] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0x4A, should be 0xD9 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.492569] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81a08440)
> -klog , AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.492569] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node ffffffff81a08440),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 0.492648] ACPI Error (dswload-0781)
> -klog : [PRID] Namespace lookup failure, AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 0.492648] ACPI Error (dswload-0781):
> +klog [PRID] Namespace lookup failure, AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.492655] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81a08440)
> -klog , AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.492655] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [] (Node ffffffff81a08440),
> +klog AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.492811] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.492811] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f5428a68),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8126,25 +8109,25 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.494198] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0x37, should be 0xC7
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.494198] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0x37, should be 0xC7 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.496094] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - F8, should be 9C
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.496094] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - F8, should be 9C (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.497662] ACPI Warning
> klog (nspredef-0357): _SB_.PCI0.P2P_._PRT: Return Package has
> klog no elements (empty) [20080926]
> @@ -8153,44 +8136,44 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.497913] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xFA, should be 0xF9
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.497913] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xFA, should be 0xF9 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.498775] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xB2, should be 0xB1
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.498775] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xB2, should be 0xB1 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.498976] ACPI Warning:
> -klog Incorrect checksum in table [GSCI] - 7B, should be 04
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.498976] ACPI Warning: Incorrect
> +klog checksum in table [GSCI] - 7B, should be 04 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.500043] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
> -klog (Node ffff8800ac22d040), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.500043] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
> +klog ffff8800ac22d040), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.501138] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.501138] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f3c28a38),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8198,8 +8181,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.505041] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.505041] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f4028a38),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8207,8 +8190,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.513609] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.513609] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f5428a38),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8216,8 +8199,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.516158] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.516158] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f74296c0),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8225,8 +8208,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.526190] ACPI Warning
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.526190] ACPI Warning
> klog (tbutils-0217): Incorrect checksum in table [OEMB] - F3,
> klog should be EE [20080926]
> klog
> @@ -8234,8 +8217,8 @@ klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.527455] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.527455] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f5422df8),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8243,8 +8226,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.533028] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.533028] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9b0bb8)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8252,25 +8235,25 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.534826] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0x7F
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.534826] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0x7F (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.538081] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - C1, should be BC
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.538081] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - C1, should be BC (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.539131] ACPI Error: No handler for
> klog Region [RAM_] (ffff88012fa36a20) [EmbeddedControl]
> klog (20110112/evregion-369)
> @@ -8279,8 +8262,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.539149] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.539149] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.LPCB.SNC_.SBRT] (Node
> klog ffff88012fa4f398), AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -8288,8 +8271,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.539161] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.539161] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
> klog ffff88012fa396b8), AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -8297,71 +8280,72 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.540036] ACPI Error: [_PR_.C002._PPC] Namespace lookup
> -klog failure, AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.540036] ACPI Error: [_PR_.C002._PPC]
> +klog Namespace lookup failure, AE_NOT_FOUND (20110112
> +klog /psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.540046] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
> -klog ffff880107e623c0), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.540046] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.LPC0.EC0_._REG] (Node ffff880107e623c0),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.541238] ACPI Error: Method parse
> -klog /execution failed [_TZ_.C2E8] (Node f482d108),
> -klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 0.541238] ACPI Error: Method parse/execution
> +klog failed [_TZ_.C2E8] (Node f482d108), AE_AML_PACKAGE_LIMIT
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.541258] ACPI Error: Method parse
> -klog /execution failed [_TZ_.C2E7] (Node f482d0f0),
> -klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 0.541258] ACPI Error: Method parse/execution
> +klog failed [_TZ_.C2E7] (Node f482d0f0), AE_AML_PACKAGE_LIMIT
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.541277] ACPI Error: Method parse
> -klog /execution failed [_TZ_.TZ2_._TMP] (Node f482d7c8),
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 0.541277] ACPI Error: Method parse/execution
> +klog failed [_TZ_.TZ2_._TMP] (Node f482d7c8),
> klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.548650] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 00, should be 87
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.548650] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 00, should be 87 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.550271] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0xDC, should be 0x0E
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.550271] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0xDC, should be 0x0E (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.563415] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.563415] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9af848)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8369,7 +8353,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.566332] ACPI Warning: For
> klog _TZ_.THRM._AL0: Return Package has no elements (empty)
> klog (20110413/nspredef-456)
> @@ -8378,25 +8362,25 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.568235] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 00, should be 7F
> -klog 20090521 tbutils-246
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.568235] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 00, should be 7F 20090521
> +klog tbutils-246
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.581397] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x24, should be 0x16
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.581397] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x24, should be 0x16 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.583718] ACPI Warning:
> klog _SB_.PCI0.PCI2._PRT: Return Package has no elements
> klog (empty) 20090521 nspredef-434
> @@ -8405,16 +8389,16 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.591409] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x1E, should be 0x16
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.591409] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x1E, should be 0x16 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
> klog CRITICAL Kernel message: [ 0.591722] ACPI Error: Field
> klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits)
> klog (20100428/dsopcode-597)
> @@ -8423,68 +8407,68 @@ klog ADVICE: The field exceeds the allocated buffer size. This
> klog can lead to unexpected results when fetching data outside
> klog this region.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.591729] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.MEM_._CRS] (Node
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.591729] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.MEM_._CRS] (Node
> klog ffff8800b4040f60), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.591760] ACPI Error (uteval-0250):
> -klog Method execution failed [_SB_.MEM_._CRS] (Node
> -klog ffff8800b4040f60), AE_AML_BUFFER_LIMIT
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.591760] ACPI Error (uteval-0250): Method
> +klog execution failed [_SB_.MEM_._CRS] (Node ffff8800b4040f60),
> +klog AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.593045] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.PPCE] (Node
> -klog f702c7b0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.593045] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.PPCE] (Node f702c7b0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.593072] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [EV4_] (Node f7019648),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.593072] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [EV4_] (Node f7019648),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.593095] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SMIE] (Node f702ea08),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.593095] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [SMIE] (Node f702ea08),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.593119] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [NEVT] (Node f702e9c0),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.593119] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [NEVT] (Node f702e9c0),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.593142] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
> -klog (Node f702e678), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.593142] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
> +klog f702e678), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
> +klog FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
> klog HIGH Kernel message: [ 0.597675] ACPI Warning for
> klog _SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
> klog expected String at index 9 (20090903/nsrepair-132)
> @@ -8494,7 +8478,7 @@ klog type and ACPI driver automatically converted it to a
> klog String. It is worth fixing this in the DSDT or SSDT even
> klog if the kernel fixes it at run time.
> klog
> -klog FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
> +klog FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
> klog HIGH Kernel message: [ 0.597680] ACPI Warning for
> klog _SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
> klog expected String at index 10 (20090903/nsrepair-132)
> @@ -8504,7 +8488,7 @@ klog type and ACPI driver automatically converted it to a
> klog String. It is worth fixing this in the DSDT or SSDT even
> klog if the kernel fixes it at run time.
> klog
> -klog FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
> +klog FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
> klog HIGH Kernel message: [ 0.597685] ACPI Warning for
> klog _SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
> klog expected String at index 11 (20090903/nsrepair-132)
> @@ -8514,7 +8498,7 @@ klog type and ACPI driver automatically converted it to a
> klog String. It is worth fixing this in the DSDT or SSDT even
> klog if the kernel fixes it at run time.
> klog
> -klog FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
> +klog FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
> klog HIGH Kernel message: [ 0.597689] ACPI Warning for
> klog _SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
> klog expected String at index 12 (20090903/nsrepair-132)
> @@ -8524,44 +8508,43 @@ klog type and ACPI driver automatically converted it to a
> klog String. It is worth fixing this in the DSDT or SSDT even
> klog if the kernel fixes it at run time.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.600451] ACPI Error (psargs-0359): [_SB_.PCI0.EGBA]
> -klog Namespace lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.600451] ACPI Error (psargs-0359):
> +klog [_SB_.PCI0.EGBA] Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.600456] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPC_.MBRD._CRS]
> -klog (Node f7416318), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.600456] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPC_.MBRD._CRS] (Node
> +klog f7416318), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.612305] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 6C, should be FB
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.612305] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 6C, should be FB (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 0.612793] ACPI Error: [CAPB]
> -klog Namespace lookup failure, AE_ALREADY_EXISTS (20110112
> -klog /dsfield-143)
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 0.612793] ACPI Error: [CAPB] Namespace
> +klog lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.612820] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.612820] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9ae190)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8569,16 +8552,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.614155] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 37, should be C7
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.614155] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 37, should be C7 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 0.620955] ACPI Warning for
> klog _TZ_.THRM._PSL: Return Package type mismatch at index 0 -
> klog found Processor, expected Reference (20090903
> @@ -8588,62 +8571,62 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.621415] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.PPCE] (Node
> -klog f702c828), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.621415] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.PPCE] (Node f702c828),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.621443] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [EV4_] (Node f7019ed0),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.621443] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [EV4_] (Node f7019ed0),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.621468] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SMIE] (Node f702ea98),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.621468] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [SMIE] (Node f702ea98),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.621493] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [NEVT] (Node f702ea50),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.621493] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [NEVT] (Node f702ea50),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.621518] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
> -klog (Node f702e708), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.621518] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
> +klog f702e708), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
> -klog Test 1, MEDIUM Kernel message: [ 0.625680] [Firmware Bug]:
> -klog PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved
> -klog in ACPI motherboard resources
> +klog FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
> +klog MEDIUM Kernel message: [ 0.625680] [Firmware Bug]: PCI:
> +klog MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in
> +klog ACPI motherboard resources
> klog
> klog ADVICE: It appears that PCI config space has been
> klog configured for a specific device but does not appear to be
> klog reserved by the ACPI motherboard resources.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.627242] ACPI Error (psargs-0359):
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.627242] ACPI Error (psargs-0359):
> klog [_SB_.PCI0.EC__.HOTT] Namespace lookup failure,
> klog AE_NOT_FOUND
> klog
> @@ -8652,35 +8635,35 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.627255] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_TZ_.TZ01._HOT] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.627255] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_TZ_.TZ01._HOT] (Node
> klog ffff88013ba3ae60), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.628646] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xFA, should be 0x1E
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.628646] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xFA, should be 0x1E (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogFirmwareBugERSTERSTTable: Test 1, HIGH
> -klog Kernel message: [ 0.628687] [Firmware Bug]: ERST: ERST
> -klog table is invalid
> +klog FAILED [HIGH] KlogAcpiErstInvalid: Test 1, HIGH Kernel
> +klog message: [ 0.628687] [Firmware Bug]: ERST: ERST table is
> +klog invalid
> klog
> klog ADVICE: The Error Record Serialization Table (ERST) seems
> klog to be invalid. This normally indicates that the ERST table
> klog header size is too small, or the table size (excluding
> klog header) is not a multiple of the ERST entries.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.630258] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.630258] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node ffff88007af370a0)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8688,62 +8671,62 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.641157] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - C4, should be C1
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.641157] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - C4, should be C1 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
> -klog Test 1, MEDIUM Kernel message: [ 0.644838] [Firmware Bug]:
> -klog PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] not reserved
> -klog in ACPI motherboard resources
> +klog FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
> +klog MEDIUM Kernel message: [ 0.644838] [Firmware Bug]: PCI:
> +klog MMCONFIG at [mem 0xe0000000-0xe09fffff] not reserved in
> +klog ACPI motherboard resources
> klog
> klog ADVICE: It appears that PCI config space has been
> klog configured for a specific device but does not appear to be
> klog reserved by the ACPI motherboard resources.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.646493] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x5F, should be 0x5A
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.646493] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x5F, should be 0x5A (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.651383] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_._OSC] (Node
> -klog ffff88007f416680), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.651383] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_._OSC] (Node ffff88007f416680)
> +klog , AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.652133] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81a2e040)
> -klog , AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.652133] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node ffffffff81a2e040),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.652695] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81a0f040)
> -klog , AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.652695] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node ffffffff81a0f040),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.653163] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.653163] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node ffff88007ab2f460)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8751,17 +8734,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.653985] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x4A, should be 0x49
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.653985] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x4A, should be 0x49 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.654642] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.654642] ACPI Error: Method parse
> klog /execution failed [_PR_.CPU1._PDC] (Node ffff88020f44deb0)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8769,8 +8752,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.654994] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.654994] ACPI Error: Method parse
> klog /execution failed [_PR_.CPU2._PDC] (Node ffff88020f44df50)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8778,8 +8761,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.655350] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.655350] ACPI Error: Method parse
> klog /execution failed [_PR_.CPU3._PDC] (Node ffff88020f454000)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -8787,161 +8770,158 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.655369] ACPI Error (psargs-0359): [_SB_.PCI0.PSKB]
> -klog Namespace lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.655369] ACPI Error (psargs-0359):
> +klog [_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.655376] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed
> -klog [_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node ffff880236c47260),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.655376] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPC0.SIO_.KBC0._STA]
> +klog (Node ffff880236c47260), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.655576] ACPI Error (psargs-0359): [_SB_.PCI0.PSMS]
> -klog Namespace lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.655576] ACPI Error (psargs-0359):
> +klog [_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.655581] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed
> -klog [_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node ffff880236c47340),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.655581] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPC0.SIO_.MSE0._STA]
> +klog (Node ffff880236c47340), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.656750] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 06, should be 05
> -klog 20090521 tbutils-246
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.656750] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 06, should be 05 20090521
> +klog tbutils-246
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 0.658002] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 0.658002] ACPI Warning for
> klog _SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found
> klog Integer, expected Buffer (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.658697] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.658697] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff88023fc14aa0), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.662008] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81a0c440)
> -klog , AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.662008] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node ffffffff81a0c440),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugACPInoSecondary: Test 1,
> -klog MEDIUM Kernel message: [ 0.663194] [Firmware Bug]: ACPI:
> -klog no secondary bus range in _CRS
> +klog FAILED [MEDIUM] KlogAcpiCrsSecondaryBusRangeMissing: Test
> +klog 1, MEDIUM Kernel message: [ 0.663194] [Firmware Bug]: ACPI
> +klog : no secondary bus range in _CRS
> klog
> klog ADVICE: _CRS Method should return a secondary bus address
> klog for the status/command port. The kernel is having to guess
> klog this based on the _BBN or assume it's 0x00-0xff.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.664875] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x45, should be 0x44
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.664875] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x45, should be 0x44 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.666686] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x9E, should be 0x9D
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.666686] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x9E, should be 0x9D (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.670109] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 5B, should be 4E
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.670109] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 5B, should be 4E (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.670182] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - C3, should be C2
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.670182] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - C3, should be C2 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.670980] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0x7F
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.670980] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0x7F (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.673104] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 8C, should be 7D
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.673104] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 8C, should be 7D (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.674282] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x15, should be 0x14
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.674282] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x15, should be 0x14 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 0.674920] ACPI Error: [SERN]
> -klog Namespace lookup failure, AE_ALREADY_EXISTS (20110413
> -klog /dswload2-316)
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 0.674920] ACPI Error: [SERN] Namespace
> +klog lookup failure, AE_ALREADY_EXISTS (20110413/dswload2-316)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.674938] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.674938] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node
> klog f3829120), AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -8949,8 +8929,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.674963] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.674963] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.LPC_.EC__.BAT1._BIF] (Node
> klog f3829330), AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -8958,16 +8938,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.675162] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x05, should be 0x04
> -klog (20110413/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.675162] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x05, should be 0x04 (20110413
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
> +klog FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
> klog HIGH Kernel message: [ 0.677370] ACPI Warning for
> klog _SB_.PCI0.BAT0._BIF: Converted Buffer to expected String
> klog at index 9 (20090903/nsrepair-132)
> @@ -8977,7 +8957,7 @@ klog type and ACPI driver automatically converted it to a
> klog String. It is worth fixing this in the DSDT or SSDT even
> klog if the kernel fixes it at run time.
> klog
> -klog FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
> +klog FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
> klog HIGH Kernel message: [ 0.677375] ACPI Warning for
> klog _SB_.PCI0.BAT0._BIF: Converted Buffer to expected String
> klog at index 12 (20090903/nsrepair-132)
> @@ -8987,88 +8967,88 @@ klog type and ACPI driver automatically converted it to a
> klog String. It is worth fixing this in the DSDT or SSDT even
> klog if the kernel fixes it at run time.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.677386] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 94, should be 93
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.677386] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 94, should be 93 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.678233] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x55, should be 0x50
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.678233] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x55, should be 0x50 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.678877] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 88, should be 7F
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.678877] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 88, should be 7F (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.681297] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - DA, should be D9
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.681297] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - DA, should be D9 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.688066] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 60, should be 5F
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.688066] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 60, should be 5F (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.695029] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81a0e440)
> -klog , AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.695029] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node ffffffff81a0e440),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.695887] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - C1, should be C0
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.695887] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - C1, should be C0 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.696587] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xEE, should be 0xE6
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.696587] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xEE, should be 0xE6 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.697769] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xFC, should be 0xF7
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.697769] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xFC, should be 0xF7 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugPowernowk8NoPSB: Test 1,
> +klog FAILED [MEDIUM] KlogAcpiAmdK8ExpectedPssObjects: Test 1,
> klog MEDIUM Kernel message: [ 0.700202] [Firmware Bug]:
> klog powernow-k8: No PSB or ACPI _PSS objects
> klog
> @@ -9083,134 +9063,134 @@ klog Tell them it is broken with Windows 2000. The reference to
> klog the AMD documentation is chapter 9 in the BIOS and Kernel
> klog Developer's Guide, which is available on www.amd.com.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.702121] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x84, should be 0x7B
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.702121] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x84, should be 0x7B (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.705041] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xF3, should be 0xF2
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.705041] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xF3, should be 0xF2 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.710267] ACPI Error: Method parse
> -klog /execution failed [_TZ_.PSWT] (Node f7424bb8),
> -klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 0.710267] ACPI Error: Method parse/execution
> +klog failed [_TZ_.PSWT] (Node f7424bb8), AE_AML_PACKAGE_LIMIT
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.710275] ACPI Error: Method parse
> -klog /execution failed [_TZ_.GTTP] (Node f7424b88),
> -klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 0.710275] ACPI Error: Method parse/execution
> +klog failed [_TZ_.GTTP] (Node f7424b88), AE_AML_PACKAGE_LIMIT
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.710281] ACPI Error: Method parse
> -klog /execution failed [_TZ_.GFXZ._TMP] (Node f74249a8),
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 0.710281] ACPI Error: Method parse/execution
> +klog failed [_TZ_.GFXZ._TMP] (Node f74249a8),
> klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.710890] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - DF, should be D2
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.710890] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - DF, should be D2 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.712727] ACPI Error: Method parse
> -klog /execution failed [_TZ_.DTSZ._TMP] (Node f7424ca8),
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 0.712727] ACPI Error: Method parse/execution
> +klog failed [_TZ_.DTSZ._TMP] (Node f7424ca8),
> klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.715065] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 67, should be 64
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.715065] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 67, should be 64 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.715951] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x9B, should be 0x93
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.715951] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x9B, should be 0x93 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.717350] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x5C, should be 0x55
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.717350] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x5C, should be 0x55 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.719490] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x3A, should be 0x39
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.719490] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x3A, should be 0x39 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.721822] ACPI Error (dswload-0659): [USB0] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.721822] ACPI Error (dswload-0659): [USB0]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.722199] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81a4d180)
> -klog , AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.722199] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node ffffffff81a4d180),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 0.725417] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 0.725417] ACPI Warning for
> klog _SB_.PCI0.LPC_.SYSR._CRS: Return type mismatch - found
> klog Integer, expected Buffer (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.725429] ACPI Error (uteval-0307): Return object type
> -klog is incorrect [_SB_.PCI0.LPC_.SYSR._CRS] (Node
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.725429] ACPI Error (uteval-0307): Return
> +klog object type is incorrect [_SB_.PCI0.LPC_.SYSR._CRS] (Node
> klog ffff88013ba46cc0), AE_TYPE
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -9218,9 +9198,9 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.725450] ACPI Error: Type returned from _CRS was
> -klog incorrect: Integer, expected Btypes: 4 (20090903
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.725450] ACPI Error: Type returned from _CRS
> +klog was incorrect: Integer, expected Btypes: 4 (20090903
> klog /uteval-313)
> klog
> klog ADVICE: The kernel has most probably detected an error
> @@ -9228,16 +9208,16 @@ klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.725974] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x7E, should be 0x75
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.725974] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x7E, should be 0x75 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.736425] ACPI Warning: For
> klog _SB_.PCI0.PT02._PRT: Return Package has no elements
> klog (empty) (20110413/nspredef-456)
> @@ -9246,26 +9226,25 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.743273] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.743273] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f701f0d8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 0.743525] ACPI Error: [CAPD]
> -klog Namespace lookup failure, AE_ALREADY_EXISTS (20110112
> -klog /dsfield-143)
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 0.743525] ACPI Error: [CAPD] Namespace
> +klog lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.743530] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.743530] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f50273d8),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -9273,8 +9252,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningParameterCountMismatch: Test
> -klog 1, HIGH Kernel message: [ 0.743538] ACPI Warning: For
> +klog FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
> +klog HIGH Kernel message: [ 0.743538] ACPI Warning: For
> klog _SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5,
> klog ACPI requires 4 (20110112/nspredef-352)
> klog
> @@ -9282,7 +9261,7 @@ klog ADVICE: The ACPI Method was executing with a different
> klog number of parameters than the Method expected. This should
> klog be fixed.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
> klog CRITICAL Kernel message: [ 0.744106] ACPI Error: Field
> klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits)
> klog (20090903/dsopcode-596)
> @@ -9291,33 +9270,33 @@ klog ADVICE: The field exceeds the allocated buffer size. This
> klog can lead to unexpected results when fetching data outside
> klog this region.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.744114] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.MEM_._CRS] (Node
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.744114] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.MEM_._CRS] (Node
> klog ffff88013ba44cc0), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.744142] ACPI Error (uteval-0250):
> -klog Method execution failed [_SB_.MEM_._CRS] (Node
> -klog ffff88013ba44cc0), AE_AML_BUFFER_LIMIT
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 0.744142] ACPI Error (uteval-0250): Method
> +klog execution failed [_SB_.MEM_._CRS] (Node ffff88013ba44cc0),
> +klog AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.755111] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 2F, should be 2A
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.755111] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 2F, should be 2A (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.772223] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.772223] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f4c250d8),
> klog AE_ALREADY_EXISTS (20101013/psparse-537)
> klog
> @@ -9325,107 +9304,107 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.775831] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0x87
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.775831] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0x87 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.777581] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xF9, should be 0xF8
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.777581] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xF9, should be 0xF8 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.779737] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x83, should be 0x82
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.779737] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x83, should be 0x82 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.780967] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - FA, should be F9
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.780967] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - FA, should be F9 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.781225] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x10, should be 0x0F
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.781225] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x10, should be 0x0F (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.781345] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xB2, should be 0xB1
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.781345] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xB2, should be 0xB1 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.782613] ACPI Error (psargs-0359): [RAMB] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.782613] ACPI Error (psargs-0359): [RAMB]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.783246] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x7D, should be 0x7C
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.783246] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x7D, should be 0x7C (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.786539] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x2D, should be 0x2C
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.786539] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x2D, should be 0x2C (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.787253] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x10, should be 0x0F
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.787253] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x10, should be 0x0F (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.788032] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x04, should be 0x03
> -klog (20110413/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.788032] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x04, should be 0x03 (20110413
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorSBOSCAEAMLBUFFERLIMIT: Test
> -klog 1, CRITICAL Kernel message: [ 0.788418] ACPI Error
> +klog FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1,
> +klog CRITICAL Kernel message: [ 0.788418] ACPI Error
> klog (psparse-0537): Method parse/execution failed [_SB_._OSC]
> klog (Node ffff88030a048b40), AE_AML_BUFFER_LIMIT
> klog
> @@ -9435,17 +9414,17 @@ klog an 8 byte buffer of 2 x 32 DWORDs, however it appears that
> klog the method is possibly trying to access data outside this
> klog buffer. This is a bug in the _OSC method.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.788607] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xA2, should be 0xA1
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.788607] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xA2, should be 0xA1 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.790513] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.790513] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node
> klog ffff880079f39f78), AE_ALREADY_EXISTS (20110112
> klog /psparse-536)
> @@ -9454,8 +9433,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.790526] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.790526] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.LPC_.EC__.BAT0._BIF] (Node
> klog ffff880079f37118), AE_ALREADY_EXISTS (20110112
> klog /psparse-536)
> @@ -9464,42 +9443,42 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.791560] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.791560] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0x3F, should be 0x1F (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 0.794367] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 0.794367] ACPI Warning for
> klog _PR_.P002._PSD: Return type mismatch - found Integer,
> klog expected Package (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.795423] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.795423] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0x3F, should be 0x1F (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.805111] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 00, should be 7E
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.805111] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 00, should be 7E (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 0.810246] [Firmware Bug]: ACPI(Z01I) defines
> klog _DOD but not _DOS
> klog
> @@ -9508,70 +9487,70 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.810687] ACPI Error (dswload-0659): [DD02] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.810687] ACPI Error (dswload-0659): [DD02]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.810756] ACPI Error (dswload-0659): [EHC1] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.810756] ACPI Error (dswload-0659): [EHC1]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.820565] ACPI Error: [FZHD] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.820565] ACPI Error: [FZHD] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.820571] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
> -klog ffff880127632b40), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.820571] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SATA.CHN0._GTM] (Node ffff880127632b40),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.820632] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
> -klog ffff880127632cd0), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.820632] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SATA.CHN1._GTM] (Node ffff880127632cd0),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.821065] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
> -klog ffff880127634758), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.821065] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node ffff880127634758),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.821112] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
> -klog ffff8801276348e8), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.821112] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node ffff8801276348e8),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.822836] ACPI Warning: For
> klog _SB_.PCI0.PCI2._PRT: Return Package has no elements
> klog (empty) (20110112/nspredef-456)
> @@ -9580,79 +9559,79 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.831199] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - B7, should be B6
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.831199] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - B7, should be B6 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.860349] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.PPCE] (Node
> -klog ffff88023704ea40), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.860349] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.PPCE] (Node ffff88023704ea40)
> +klog , AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.860380] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [EV4_] (Node
> -klog ffff8802370590e0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.860380] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [EV4_] (Node ffff8802370590e0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.860410] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SMIE] (Node
> -klog ffff8802370522a0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.860410] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [SMIE] (Node ffff8802370522a0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.860439] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [NEVT] (Node
> -klog ffff880237052240), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.860439] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [NEVT] (Node ffff880237052240),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.860468] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
> -klog (Node ffff880237050de0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.860468] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
> +klog ffff880237050de0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.870147] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.870147] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0._OSC] (Node
> klog ffff88013ba29e80), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.872036] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - EC, should be E3
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.872036] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - EC, should be E3 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.873454] ACPI Warning for
> klog _SB_.PCI0.PCIB._PRT: Return Package has no elements
> klog (empty) (20090903/nspredef-433)
> @@ -9661,43 +9640,43 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.875591] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 14, should be 13
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.875591] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 14, should be 13 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.877093] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x89, should be 0x80
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.877093] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x89, should be 0x80 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 0.879606] ACPI Error (psargs-0359): [MPEN] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 0.879606] ACPI Error (psargs-0359): [MPEN]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.879794] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_TZ_.TZ00._PSL] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.879794] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_TZ_.TZ00._PSL] (Node
> klog ffff88015ba4de00), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 0.888177] ACPI Warning for
> klog _SB_.BAT1._BST: Return Package type mismatch at index 2 -
> klog found [NULL Object Descriptor], expected Integer (20090903
> @@ -9707,7 +9686,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 0.890080] ACPI Error: No handler for
> klog Region [RAM_] (ffff880133a35a20) [EmbeddedControl]
> klog (20100428/evregion-369)
> @@ -9716,257 +9695,257 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
> -klog message: [ 0.890253] ACPI Error: Region
> +klog FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
> +klog Kernel message: [ 0.890253] ACPI Error: Region
> klog EmbeddedControl(0x3) has no handler (20100428/exfldio-293)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.890421] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.890421] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
> klog (Node ffff880133a49620), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.890696] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 0.890696] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> klog (Node ffff880133a385e0), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.892097] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.PPCE] (Node
> -klog ffff88021704e920), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.892097] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.PPCE] (Node ffff88021704e920)
> +klog , AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.892124] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [EV4_] (Node
> -klog ffff880217056700), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.892124] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [EV4_] (Node ffff880217056700),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.892147] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SMIE] (Node
> -klog ffff880217052180), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.892147] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [SMIE] (Node ffff880217052180),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.892171] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [NEVT] (Node
> -klog ffff880217052120), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.892171] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [NEVT] (Node ffff880217052120),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.892195] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
> -klog (Node ffff880217050cc0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.892195] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
> +klog ffff880217050cc0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.892915] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xCE, should be 0xCD
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.892915] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xCE, should be 0xCD (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.899338] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0xDD, should be 0xD4
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.899338] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0xDD, should be 0xD4 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.900692] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.PPCE] (Node
> -klog ffff88021704e960), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.900692] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.PPCE] (Node ffff88021704e960)
> +klog , AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.900729] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [EV4_] (Node
> -klog ffff880217059000), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.900729] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [EV4_] (Node ffff880217059000),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.900753] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SMIE] (Node
> -klog ffff8802170521c0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.900753] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [SMIE] (Node ffff8802170521c0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.900776] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [NEVT] (Node
> -klog ffff880217052160), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.900776] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [NEVT] (Node ffff880217052160),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.900801] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
> -klog (Node ffff880217050d00), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.900801] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
> +klog ffff880217050d00), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.905032] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.PPCE] (Node
> -klog ffff88021304e940), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.905032] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.PPCE] (Node ffff88021304e940)
> +klog , AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.905061] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [EV4_] (Node
> -klog ffff8802130576a0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.905061] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [EV4_] (Node ffff8802130576a0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.905085] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SMIE] (Node
> -klog ffff8802130521a0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.905085] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [SMIE] (Node ffff8802130521a0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.905110] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [NEVT] (Node
> -klog ffff880213052140), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.905110] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [NEVT] (Node ffff880213052140),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.905135] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
> -klog (Node ffff880213050ce0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.905135] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
> +klog ffff880213050ce0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.905920] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.C000.C264] (Node
> -klog f7024e58), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 0.905920] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.C000.C264] (Node f7024e58),
> +klog AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.905985] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.C000._PSS] (Node
> -klog f7024f30), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 0.905985] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.C000._PSS] (Node f7024f30),
> +klog AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogFirmwareBugBIOSNeeds: Test 1, HIGH
> -klog Kernel message: [ 0.906063] [Firmware Bug]: BIOS needs
> -klog update for CPU frequency support
> +klog FAILED [HIGH] KlogAcpiMissingPssPct: Test 1, HIGH Kernel
> +klog message: [ 0.906063] [Firmware Bug]: BIOS needs update for
> +klog CPU frequency support
> klog
> klog ADVICE: Having _PPC but missing frequencies (_PSS, _PCT)
> klog is a good hint that the BIOS is older than the CPU and
> klog does not know the CPU frequencies.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.940265] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x14, should be 0x13
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.940265] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x14, should be 0x13 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.940948] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 0.940948] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f7421fc0), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.941821] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0x3F, should be 0x91
> -klog (20110413/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.941821] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0x3F, should be 0x91 (20110413
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.943511] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0x7E
> -klog (20110413/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.943511] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0x7E (20110413
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.944156] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.ACAD._PSR]
> -klog (Node ffff88013384d720), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.944156] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.ACAD._PSR] (Node
> +klog ffff88013384d720), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 0.967528] ACPI Warning for
> klog _TZ_.THRM._AL0: Return Package has no elements (empty)
> klog (20100428/nspredef-456)
> @@ -9975,119 +9954,121 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 0.972652] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - FA, should be F7
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 0.972652] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - FA, should be F7 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 0.990917] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 0.990917] ACPI Warning for
> klog _SB_.PCI0.FNC2.PRT0._GTF: Return type mismatch - found
> klog Integer, expected Buffer (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 0.991675] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 0.991675] ACPI Warning for
> klog _SB_.PCI0.FNC2.PRT1._GTF: Return type mismatch - found
> klog Integer, expected Buffer (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 0.992685] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81cf6eb0)
> -klog , AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 0.992685] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node ffffffff81cf6eb0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.004972] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [CPUT] (Node f701c150),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.004972] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [CPUT] (Node f701c150),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.005015] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PSSC] (Node f701c168),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.005015] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [PSSC] (Node f701c168),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.005055] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> -klog (Node f702f3c0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.005055] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
> +klog f702f3c0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.005834] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x1D, should be 0x1C
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.005834] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x1D, should be 0x1C (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.009421] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.ACAD._PSR]
> -klog (Node f701aa98), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.009421] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.ACAD._PSR] (Node
> +klog f701aa98), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.020525] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xE8, should be 0xE7
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.020525] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xE8, should be 0xE7 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 1.020868] ACPI Warning for _PR_.CPU0._PSD: Incorrectly
> -klog formed Package, attempting repair (20090903/nsrepair-200)
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 1.020868] ACPI Warning for _PR_.CPU0._PSD:
> +klog Incorrectly formed Package, attempting repair (20090903
> +klog /nsrepair-200)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 1.021557] ACPI Warning for _PR_.CPU1._PSD: Incorrectly
> -klog formed Package, attempting repair (20090903/nsrepair-200)
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 1.021557] ACPI Warning for _PR_.CPU1._PSD:
> +klog Incorrectly formed Package, attempting repair (20090903
> +klog /nsrepair-200)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.023813] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x82, should be 0x81
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.023813] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x82, should be 0x81 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningInvalidThrottlingState: Test
> -klog 1, HIGH Kernel message: [ 1.026272] ACPI Warning
> +klog FAILED [HIGH] KlogAcpiInvalidThrottlingState: Test 1, HIGH
> +klog Kernel message: [ 1.026272] ACPI Warning
> klog (processor_throttling-0843): Invalid throttling state,
> klog reset
> klog
> @@ -10095,7 +10076,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 1.027573] ACPI Error: No handler for
> klog Region [ERAM] (ffff880133e3e798) [EmbeddedControl]
> klog (20090903/evregion-319)
> @@ -10104,17 +10085,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.027587] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.DOCK._STA]
> -klog (Node ffff880133e48620), AE_NOT_EXIST
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 1.027587] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.DOCK._STA] (Node
> +klog ffff880133e48620), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.027653] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 1.027653] ACPI Error (uteval-0250):
> klog Method execution failed [_SB_.PCI0.DOCK._STA] (Node
> klog ffff880133e48620), AE_NOT_EXIST
> klog
> @@ -10122,59 +10103,59 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [CRITICAL] KlogFirmwareBugNoValidTrip: Test 1,
> -klog CRITICAL Kernel message: [ 1.125427] [Firmware Bug]: No
> -klog valid trip found
> +klog FAILED [CRITICAL] KlogAcpiNoValidCrt: Test 1, CRITICAL
> +klog Kernel message: [ 1.125427] [Firmware Bug]: No valid trip
> +klog found
> klog
> -klog ADVICE: No valud ACPI _CRT (Critical Trip Point) was
> +klog ADVICE: No valid ACPI _CRT (Critical Trip Point) was
> klog found.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.158298] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_._OSC] (Node
> -klog f701b648), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.158298] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_._OSC] (Node f701b648),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 1.167050] ACPI Error: [CDW1] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110316/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 1.167050] ACPI Error: [CDW1] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110316/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.167226] ACPI Error: Method parse
> -klog /execution failed [_SB_._OSC] (Node f4422648),
> -klog AE_NOT_FOUND (20110316/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.167226] ACPI Error: Method parse/execution
> +klog failed [_SB_._OSC] (Node f4422648), AE_NOT_FOUND (20110316
> +klog /psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.168945] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x04, should be 0xFD
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.168945] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x04, should be 0xFD (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.174038] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0x00, should be 0x9B
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.174038] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0x00, should be 0x9B (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugPowernowk8NoPSB: Test 1,
> +klog FAILED [MEDIUM] KlogAcpiAmdK8ExpectedPssObjects: Test 1,
> klog MEDIUM Kernel message: [ 1.176461] [Firmware Bug]:
> klog powernow-k8: No compatible ACPI _PSS objects found.
> klog
> @@ -10189,24 +10170,24 @@ klog Tell them it is broken with Windows 2000. The reference to
> klog the AMD documentation is chapter 9 in the BIOS and Kernel
> klog Developer's Guide, which is available on www.amd.com.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugPowernowk8TryAgain: Test 1,
> -klog MEDIUM Kernel message: [ 1.176462] [Firmware Bug]:
> -klog powernow-k8: Try again with latest BIOS.
> +klog FAILED [MEDIUM] KlogAcpiTryNewAmdFirmware: Test 1, MEDIUM
> +klog Kernel message: [ 1.176462] [Firmware Bug]: powernow-k8:
> +klog Try again with latest BIOS.
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.179893] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x81, should be 0x59
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.179893] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x81, should be 0x59 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 1.183989] [Firmware Bug]: ACPI(PEGD) defines
> klog _DOD but not _DOS
> klog
> @@ -10215,7 +10196,7 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 1.184923] ACPI Warning: For
> klog _SB_.PCI0.P0P1._PRT: Return Package has no elements
> klog (empty) (20110413/nspredef-456)
> @@ -10224,79 +10205,79 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 1.186079] ACPI Error: [BRTW] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 1.186079] ACPI Error: [BRTW] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.186087] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node
> -klog f4c2a588), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.186087] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0.DD03._BCM] (Node f4c2a588),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.187842] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0.PPC_] (Node
> -klog f7450168), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.187842] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU0.PPC_] (Node f7450168),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.187891] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0._PPC] (Node
> -klog f74500c0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.187891] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU0._PPC] (Node f74500c0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.188370] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PPC] (Node
> -klog f7450150), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.188370] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU1._PPC] (Node f7450150),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.188776] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU2._PPC] (Node
> -klog f74502b8), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.188776] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU2._PPC] (Node f74502b8),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.189190] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU3._PPC] (Node
> -klog f7450258), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.189190] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU3._PPC] (Node f7450258),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.196055] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0._OSC] (Node f3824270),
> -klog AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.196055] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0._OSC] (Node f3824270), AE_NOT_FOUND
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 1.210593] ACPI Warning: For
> klog _SB_.PCI0.PCIB._PRT: Return Package has no elements
> klog (empty) (20101013/nspredef-456)
> @@ -10305,7 +10286,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 1.212692] ACPI Warning: For
> klog _TZ_.THRM._AL0: Return Package has no elements (empty)
> klog (20110112/nspredef-456)
> @@ -10314,17 +10295,16 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 1.214748] ACPI Error: [_T_1]
> -klog Namespace lookup failure, AE_ALREADY_EXISTS (20110112
> -klog /dswload-802)
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 1.214748] ACPI Error: [_T_1] Namespace
> +klog lookup failure, AE_ALREADY_EXISTS (20110112/dswload-802)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.214761] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 1.214761] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node
> klog f3023438), AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -10332,8 +10312,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.214775] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 1.214775] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node
> klog f3023420), AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -10341,8 +10321,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.222641] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 1.222641] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node
> klog f30235b8), AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -10350,8 +10330,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.222655] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 1.222655] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node
> klog f30235a0), AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -10359,66 +10339,66 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.224060] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.BAT1._STA] (Node
> -klog f7023b10), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 1.224060] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.BAT1._STA] (Node f7023b10),
> +klog AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.228128] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
> -klog (Node f702a570), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.228128] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
> +klog f702a570), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.229185] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0._OSC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 1.229185] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
> klog f70140d8), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 1.230869] ACPI Warning for _PR_.CPU0._PSS:
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 1.230869] ACPI Warning for _PR_.CPU0._PSS:
> klog SubPackage[15,16] - suspicious power dissipation values
> klog (20100428/nsrepair2-403)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 1.231049] ACPI Warning for _PR_.CPU1._PSS:
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 1.231049] ACPI Warning for _PR_.CPU1._PSS:
> klog SubPackage[15,16] - suspicious power dissipation values
> klog (20100428/nsrepair2-403)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 1.231224] ACPI Warning for _PR_.CPU2._PSS:
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 1.231224] ACPI Warning for _PR_.CPU2._PSS:
> klog SubPackage[15,16] - suspicious power dissipation values
> klog (20100428/nsrepair2-403)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 1.231399] ACPI Warning for _PR_.CPU3._PSS:
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 1.231399] ACPI Warning for _PR_.CPU3._PSS:
> klog SubPackage[15,16] - suspicious power dissipation values
> klog (20100428/nsrepair2-403)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 1.246159] ACPI Error: No handler for
> klog Region [ECRM] (f6cedba0) [EmbeddedControl] (20110413
> klog /evregion-373)
> @@ -10427,16 +10407,17 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
> -klog message: [ 1.246164] ACPI Error: Region EmbeddedControl
> -klog (ID=3) has no handler (20110413/exfldio-292)
> +klog FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
> +klog Kernel message: [ 1.246164] ACPI Error: Region
> +klog EmbeddedControl (ID=3) has no handler (20110413
> +klog /exfldio-292)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.246169] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 1.246169] ACPI Error: Method parse
> klog /execution failed [_TZ_.RDEC] (Node f442fc60),
> klog AE_NOT_EXIST (20110413/psparse-536)
> klog
> @@ -10444,8 +10425,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.246176] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 1.246176] ACPI Error: Method parse
> klog /execution failed [_TZ_.TZS0._TMP] (Node f442fca8),
> klog AE_NOT_EXIST (20110413/psparse-536)
> klog
> @@ -10453,34 +10434,34 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.270260] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [CPUT] (Node
> -klog ffff880137a4e840), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.270260] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [CPUT] (Node ffff880137a4e840),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.270297] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PSSC] (Node
> -klog ffff880137a4e860), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.270297] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [PSSC] (Node ffff880137a4e860),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.270332] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> -klog (Node ffff880137a3fd00), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.270332] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
> +klog ffff880137a3fd00), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 1.272398] ACPI Error: No handler for
> klog Region [ECRM] (f76d0c60) [EmbeddedControl] (20110112
> klog /evregion-369)
> @@ -10489,8 +10470,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.272407] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 1.272407] ACPI Error: Method parse
> klog /execution failed [_TZ_.RDEC] (Node f742fc60),
> klog AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -10498,8 +10479,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.272415] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 1.272415] ACPI Error: Method parse
> klog /execution failed [_TZ_.TZS0._TMP] (Node f742fca8),
> klog AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -10507,7 +10488,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 1.280955] ACPI Error: No handler for
> klog Region [PCFG] (ffff880137a733f0) [PCI_Config] (20090903
> klog /evregion-319)
> @@ -10516,44 +10497,44 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.280965] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [J380._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 1.280965] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [J380._STA] (Node
> klog ffff88013712b380), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 1.314561] ACPI Error: [ECPU] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 1.314561] ACPI Error: [ECPU] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.314567] ACPI Error: Method parse
> -klog /execution failed [_TZ_.TZ00._TMP] (Node ffff88011763ca28)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.314567] ACPI Error: Method parse/execution
> +klog failed [_TZ_.TZ00._TMP] (Node ffff88011763ca28),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.320114] ACPI Warning:
> -klog Incorrect checksum in table [ATKG] - 0x9D, should be 0xE5
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.320114] ACPI Warning: Incorrect
> +klog checksum in table [ATKG] - 0x9D, should be 0xE5 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorSBOSCAEAMLBUFFERLIMIT: Test
> -klog 1, CRITICAL Kernel message: [ 1.336148] ACPI Error
> +klog FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1,
> +klog CRITICAL Kernel message: [ 1.336148] ACPI Error
> klog (psparse-0537): Method parse/execution failed [_SB_._OSC]
> klog (Node ffff88012b647200), AE_AML_BUFFER_LIMIT
> klog
> @@ -10563,8 +10544,8 @@ klog an 8 byte buffer of 2 x 32 DWORDs, however it appears that
> klog the method is possibly trying to access data outside this
> klog buffer. This is a bug in the _OSC method.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.337975] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 1.337975] ACPI Error (uteval-0250):
> klog Method execution failed [J380._STA] (Node
> klog ffff88013712b380), AE_NOT_EXIST
> klog
> @@ -10572,7 +10553,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
> klog CRITICAL Kernel message: [ 1.371174] ACPI Error: Field
> klog [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits)
> klog (20090903/dsopcode-596)
> @@ -10581,8 +10562,8 @@ klog ADVICE: The field exceeds the allocated buffer size. This
> klog can lead to unexpected results when fetching data outside
> klog this region.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorSBOSCAEAMLBUFFERLIMIT: Test
> -klog 1, CRITICAL Kernel message: [ 1.371180] ACPI Error
> +klog FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1,
> +klog CRITICAL Kernel message: [ 1.371180] ACPI Error
> klog (psparse-0537): Method parse/execution failed [_SB_._OSC]
> klog (Node ffff88044b85e4a0), AE_AML_BUFFER_LIMIT
> klog
> @@ -10592,51 +10573,51 @@ klog an 8 byte buffer of 2 x 32 DWORDs, however it appears that
> klog the method is possibly trying to access data outside this
> klog buffer. This is a bug in the _OSC method.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.381411] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [] (Node ffffffff81a2b040)
> -klog , AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.381411] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [] (Node ffffffff81a2b040),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 1.381481] ACPI Error (dswload-0659): [PCI0] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 1.381481] ACPI Error (dswload-0659): [PCI0]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 1.384655] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 1.384655] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff8801393f91f8
> klog (20090903/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.384672] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.VGA_._DSM]
> -klog (Node ffff88013ba4c020), AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 1.384672] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node
> +klog ffff88013ba4c020), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.384743] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM]
> -klog (Node ffff88013ba4d9c0), AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 1.384743] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
> +klog ffff88013ba4d9c0), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines
> klog _DOD but not _DOS
> klog
> @@ -10645,7 +10626,7 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 1.398053] ACPI: acpi_idle yielding
> klog to intel_idleACPI Warning for _TZ_.TZ01._PSL: Return
> klog Package type mismatch at index 0 - found Processor,
> @@ -10655,7 +10636,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 1.399160] ACPI Warning for
> klog _SB_.PCI0.PT02._PRT: Return Package has no elements
> klog (empty) (20090903/nspredef-433)
> @@ -10664,25 +10645,25 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.400736] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
> -klog (Node f7018e58), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.400736] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
> +klog f7018e58), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.436671] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
> -klog (Node f7024e58), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.436671] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
> +klog f7024e58), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 1.462866] ACPI Warning:
> klog _SB_.PCI0.VID2._DOD: Return Package has no elements
> klog (empty) 20090521 nspredef-434
> @@ -10691,167 +10672,167 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 1.480960] ACPI Warning:
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 1.480960] ACPI Warning:
> klog _SB_.PCI0.FNC2.PRT0._GTF: Return type mismatch - found
> klog Integer, expected Buffer 20090521 nspredef-940
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 1.488986] ACPI Error (psargs-0359): [GTF0] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 1.488986] ACPI Error (psargs-0359): [GTF0]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.488991] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._SDD]
> -klog (Node f702b708), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.488991] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
> +klog f702b708), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.489034] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF]
> -klog (Node f702b720), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.489034] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
> +klog f702b720), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.505441] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 7C, should be 7B
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.505441] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 7C, should be 7B (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.507734] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 2D, should be 2C
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.507734] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 2D, should be 2C (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.509153] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - C0, should be BF
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.509153] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - C0, should be BF (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.512057] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - CA, should be C9
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.512057] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - CA, should be C9 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.515657] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xC5, should be 0xC4
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.515657] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xC5, should be 0xC4 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 1.518091] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 1.518091] ACPI Warning for
> klog _SB_.PCI0.IDE1.PRT0._GTF: Return type mismatch - found
> klog Integer, expected Buffer (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.528248] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x98, should be 0x97
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.528248] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x98, should be 0x97 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.529653] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0x7C, should be 0x7B
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.529653] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0x7C, should be 0x7B (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.535278] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 00, should be 88
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.535278] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 00, should be 88 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.545790] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - D0, should be CF
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.545790] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - D0, should be CF (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.555599] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [CPUT] (Node
> -klog ffff8801b90590c0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.555599] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [CPUT] (Node ffff8801b90590c0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.555652] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PSSC] (Node
> -klog ffff8801b90590e0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.555652] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [PSSC] (Node ffff8801b90590e0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.555703] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> -klog (Node ffff8801b903b6e0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.555703] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
> +klog ffff8801b903b6e0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.559068] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - C5, should be C4
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.559068] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - C5, should be C4 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 1.570612] ACPI Error: No handler for
> klog Region [PCFG] (ffff8801b9074240) [PCI_Config] (20090903
> klog /evregion-319)
> @@ -10860,25 +10841,25 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.570624] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [J380._STA] (Node
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 1.570624] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [J380._STA] (Node
> klog ffff8801b916ea40), AE_NOT_EXIST
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.586563] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - D7, should be D3
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.586563] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - D7, should be D3 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 1.590337] ACPI Warning: For
> klog _TZ_.THRM._PSL: Return Package has no elements (empty)
> klog (20110112/nspredef-456)
> @@ -10887,96 +10868,97 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.601784] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 5D, should be 55
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.601784] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 5D, should be 55 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorCurrentBrightnessInvalid: Test
> -klog 1, HIGH Kernel message: [ 1.605121] ACPI Error: Current
> -klog brightness invalid (20110112/video-377)
> +klog FAILED [HIGH] KlogAcpiInvalidBrightness: Test 1, HIGH
> +klog Kernel message: [ 1.605121] ACPI Error: Current brightness
> +klog invalid (20110112/video-377)
> klog
> -klog ADVICE: ACPI video driver has encountered a brightness
> -klog level that is outside the expected range.
> +klog ADVICE: The ACPI video driver set the brightness level
> +klog using the ACPI control _BCM, however the level used was
> +klog not a known level (as returned by _BCL).
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 1.605465] ACPI Error: [RAMB] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 1.605465] ACPI Error: [RAMB] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.616034] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0.PPC_] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.616034] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU0.PPC_] (Node
> klog ffff88015334da00), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.616243] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.616243] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU0._PPC] (Node
> klog ffff88015334d920), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.618281] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.618281] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU1._PPC] (Node
> klog ffff88015334d9e0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.620164] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU2._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.620164] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU2._PPC] (Node
> klog ffff88015334dbc0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.621081] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU3._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.621081] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU3._PPC] (Node
> klog ffff88015334db40), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 1.648580] ACPI Error: [SMS_] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 1.648580] ACPI Error: [SMS_] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.648589] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
> -klog f3429e58), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.648589] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SATA.PRT0._SDD] (Node f3429e58),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.662849] ACPI Error (uteval-0250):
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 1.662849] ACPI Error (uteval-0250):
> klog Method execution failed [J380._STA] (Node
> klog ffff8801b916ea40), AE_NOT_EXIST
> klog
> @@ -10984,151 +10966,149 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 1.678325] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 1.678325] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88022f7bb5e8
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.678342] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.VGA_._DSM] (Node
> -klog ffff88022f460190), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 1.678342] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.VGA_._DSM] (Node ffff88022f460190),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 1.678390] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 1.678390] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88022f7bb8b8
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.678412] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
> -klog ffff88022f464230), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 1.678412] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88022f464230),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.701482] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.PPCE] (Node
> -klog ffff88022704e960), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.701482] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.PPCE] (Node ffff88022704e960)
> +klog , AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.701521] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [EV4_] (Node
> -klog ffff880227059000), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.701521] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [EV4_] (Node ffff880227059000),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.701557] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SMIE] (Node
> -klog ffff8802270521c0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.701557] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [SMIE] (Node ffff8802270521c0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.701592] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [NEVT] (Node
> -klog ffff880227052160), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.701592] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [NEVT] (Node ffff880227052160),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.701628] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
> -klog (Node ffff880227050d00), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.701628] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
> +klog ffff880227050d00), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 1.739479] ACPI Warning:
> -klog Incorrect checksum in table [SSDT] - 0x3F, should be 0x91
> -klog (20110112/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 1.739479] ACPI Warning: Incorrect
> +klog checksum in table [SSDT] - 0x3F, should be 0x91 (20110112
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.761428] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
> -klog (Node ffff8800bc234d60), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.761428] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
> +klog ffff8800bc234d60), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.782803] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0.PPC_] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.782803] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU0.PPC_] (Node
> klog ffff8801d4d0ac60), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.783001] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.783001] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU0._PPC] (Node
> klog ffff8801d4d0ab80), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.784831] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.784831] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU1._PPC] (Node
> klog ffff8801d4d0ac40), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.786497] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU2._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.786497] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU2._PPC] (Node
> klog ffff8801d4d0ae20), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.787299] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU3._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.787299] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU3._PPC] (Node
> klog ffff8801d4d0ada0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 1.849787] ACPI Warning for
> klog _PR_.CPU3._PSD: Return Package type mismatch at index 4 -
> klog found [NULL Object Descriptor], expected Integer
> @@ -11138,17 +11118,16 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 1.861558] ACPI Error: [SERN]
> -klog Namespace lookup failure, AE_ALREADY_EXISTS (20110112
> -klog /dswload-802)
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 1.861558] ACPI Error: [SERN] Namespace
> +klog lookup failure, AE_ALREADY_EXISTS (20110112/dswload-802)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.861576] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 1.861576] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node
> klog ffff880232c509b0), AE_ALREADY_EXISTS (20110112
> klog /psparse-536)
> @@ -11157,8 +11136,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.861601] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 1.861601] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.LPC_.EC__.BAT1._BIF] (Node
> klog ffff880232c50d20), AE_ALREADY_EXISTS (20110112
> klog /psparse-536)
> @@ -11167,97 +11146,97 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.864413] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node f3025828),
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 1.864413] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DOD] (Node f3025828),
> klog AE_AML_PACKAGE_LIMIT (20110413/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.893953] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [CPUT] (Node
> -klog ffff8800b3c50000), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.893953] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [CPUT] (Node ffff8800b3c50000),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.894002] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PSSC] (Node
> -klog ffff8800b3c50020), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.894002] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [PSSC] (Node ffff8800b3c50020),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.894047] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> -klog (Node ffff8800b3c49380), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.894047] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
> +klog ffff8800b3c49380), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 1.900224] ACPI Error: [NPSS] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 1.900224] ACPI Error: [NPSS] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.900238] ACPI Error: Method parse
> -klog /execution failed [_PR_.CPU0.PPC_] (Node ffff88014f9a5140)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.900238] ACPI Error: Method parse/execution
> +klog failed [_PR_.CPU0.PPC_] (Node ffff88014f9a5140),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.900254] ACPI Error: Method parse
> -klog /execution failed [_PR_.CPU0._PPC] (Node ffff88014f9a5028)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.900254] ACPI Error: Method parse/execution
> +klog failed [_PR_.CPU0._PPC] (Node ffff88014f9a5028),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.900769] ACPI Error: Method parse
> -klog /execution failed [_PR_.CPU1._PPC] (Node ffff88014f9a5118)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.900769] ACPI Error: Method parse/execution
> +klog failed [_PR_.CPU1._PPC] (Node ffff88014f9a5118),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.901001] ACPI Error: Method parse
> -klog /execution failed [_PR_.CPU2._PPC] (Node ffff88014f9a5370)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.901001] ACPI Error: Method parse/execution
> +klog failed [_PR_.CPU2._PPC] (Node ffff88014f9a5370),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.901211] ACPI Error: Method parse
> -klog /execution failed [_PR_.CPU3._PPC] (Node ffff88014f9a52d0)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.901211] ACPI Error: Method parse/execution
> +klog failed [_PR_.CPU3._PPC] (Node ffff88014f9a52d0),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 1.905440] ACPI Warning: For
> klog _SB_.PCI0.PCIB._PRT: Return Package has no elements
> klog (empty) (20110112/nspredef-456)
> @@ -11266,34 +11245,34 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 1.907422] ACPI Error: [GTF0] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 1.907422] ACPI Error: [GTF0] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.907427] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
> -klog f3431a50), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.907427] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3431a50),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.907445] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
> -klog f3431a68), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.907445] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3431a68),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 1.911273] ACPI Warning for
> klog _SB_.PCI0.P0P1._PRT: Return Package has no elements
> klog (empty) (20090903/nspredef-433)
> @@ -11302,31 +11281,31 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.929855] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.IDE1.GTM_]
> -klog (Node f7414858), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 1.929855] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.IDE1.GTM_] (Node
> +klog f7414858), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.929872] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM]
> -klog (Node f7414798), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 1.929872] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM] (Node
> +klog f7414798), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 1.958776] ACPI Warning for _PR_.CPU0._PSD:
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 1.958776] ACPI Warning for _PR_.CPU0._PSD:
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 1.958968] ACPI Warning for
> klog _PR_.CPU1._PSD: Return Package type mismatch at index 4 -
> klog found [NULL Object Descriptor], expected Integer (20090903
> @@ -11336,7 +11315,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 1.959113] ACPI Warning for
> klog _PR_.CPU2._PSD: Return Package type mismatch at index 4 -
> klog found [NULL Object Descriptor], expected Integer (20090903
> @@ -11346,7 +11325,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 1.959252] ACPI Warning for
> klog _PR_.CPU3._PSD: Return Package type mismatch at index 4 -
> klog found [NULL Object Descriptor], expected Integer (20090903
> @@ -11356,7 +11335,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 1.959427] ACPI Warning for
> klog _PR_.CPU4._PSD: Return Package type mismatch at index 4 -
> klog found [NULL Object Descriptor], expected Integer (20090903
> @@ -11366,7 +11345,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 1.959602] ACPI Warning for
> klog _PR_.CPU5._PSD: Return Package type mismatch at index 4 -
> klog found [NULL Object Descriptor], expected Integer (20090903
> @@ -11376,7 +11355,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 1.959776] ACPI Warning for
> klog _PR_.CPU6._PSD: Return Package type mismatch at index 4 -
> klog found [NULL Object Descriptor], expected Integer (20090903
> @@ -11386,7 +11365,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 1.959951] ACPI Warning for
> klog _PR_.CPU7._PSD: Return Package type mismatch at index 4 -
> klog found [NULL Object Descriptor], expected Integer (20090903
> @@ -11396,124 +11375,124 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.962612] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0.PPC_] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.962612] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU0.PPC_] (Node
> klog ffff8801534e5dc0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.962811] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.962811] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU0._PPC] (Node
> klog ffff8801534e5ce0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.964620] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.964620] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU1._PPC] (Node
> klog ffff8801534e5da0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.966282] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU2._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.966282] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU2._PPC] (Node
> klog ffff8801534e5f80), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.967081] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU3._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.967081] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU3._PPC] (Node
> klog ffff8801534e5f00), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.974827] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
> -klog f3831a50), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.974827] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3831a50),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 1.974846] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
> -klog f3831a68), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 1.974846] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3831a68),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.001829] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.PATA.GTM_] (Node f5423ba0),
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 2.001829] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.PATA.GTM_] (Node f5423ba0),
> klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.001850] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.PATA.CHN0._GTM] (Node
> -klog f54239c0), AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 2.001850] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.PATA.CHN0._GTM] (Node f54239c0),
> +klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.002809] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.PATA.CHN1._GTM] (Node
> -klog f5423ac8), AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 2.002809] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.PATA.CHN1._GTM] (Node f5423ac8),
> +klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.006621] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [CPUT] (Node
> -klog ffff8801b90570c0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.006621] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [CPUT] (Node ffff8801b90570c0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.006671] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [PSSC] (Node
> -klog ffff8801b90570e0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.006671] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [PSSC] (Node ffff8801b90570e0),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.006718] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
> -klog (Node ffff8801b903fa80), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.006718] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
> +klog ffff8801b903fa80), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorCouldNotEnable: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
> klog Kernel message: [ 2.022076] ACPI Error: Could not enable
> klog SleepButton event (20110112/evxfevnt-198)
> klog
> @@ -11521,7 +11500,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningCouldNotEnable: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiCannotEnableFixedEvent: Test 1, HIGH
> klog Kernel message: [ 2.022090] ACPI Warning: Could not enable
> klog fixed event 0x3 (20110112/evxface-197)
> klog
> @@ -11529,25 +11508,25 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.033653] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
> -klog f6031468), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.033653] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f6031468),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.033670] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
> -klog f6031480), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.033670] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f6031480),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugACPIInvalidBIOS: Test 1,
> +klog FAILED [MEDIUM] KlogAcpiInvalidPssFrequency: Test 1,
> klog MEDIUM Kernel message: [ 2.039517] [Firmware Bug]: ACPI:
> klog Invalid BIOS _PSS frequency: 0x80000000 MHz
> klog
> @@ -11555,7 +11534,7 @@ klog ADVICE: _PSS (Performance Supported States) package has an
> klog incorrectly define core frequency (first DWORD entry in
> klog the _PSS package).
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 2.045931] ACPI Warning for
> klog _SB_.PCI0.P0P1._PRT: Return Package has no elements
> klog (empty) (20100428/nspredef-456)
> @@ -11564,7 +11543,7 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 2.049441] ACPI Warning for
> klog _PR_.CPU0._PSD: Return Package type mismatch at index 4 -
> klog found [NULL Object Descriptor], expected Integer (20090903
> @@ -11574,106 +11553,106 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.068617] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
> -klog f3c29e58), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.068617] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SATA.PRT0._SDD] (Node f3c29e58),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 2.081502] ACPI Error (psargs-0359): [NPSS] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 2.081502] ACPI Error (psargs-0359): [NPSS]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.081508] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0.PPC_] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.081508] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU0.PPC_] (Node
> klog ffff8801534e5c20), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.081585] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU0._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.081585] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU0._PPC] (Node
> klog ffff8801534e5b40), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.083171] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.083171] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU1._PPC] (Node
> klog ffff8801534e5c00), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.084838] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU2._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.084838] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU2._PPC] (Node
> klog ffff8801534e5de0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.085644] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU3._PPC] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.085644] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU3._PPC] (Node
> klog ffff8801534e5d60), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.106307] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
> -klog ffff88023f45dca8), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.106307] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff88023f45dca8),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.106326] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
> -klog ffff88023f45dcd0), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.106326] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff88023f45dcd0),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.113330] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
> -klog f74317b0), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.113330] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f74317b0),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.113367] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
> -klog f74317c8), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.113367] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f74317c8),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorCouldNotEnable: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
> klog Kernel message: [ 2.132386] ACPI Error: Could not enable
> klog SleepButton event (20090903/evxfevnt-193)
> klog
> @@ -11681,7 +11660,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningCouldNotEnable: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiCannotEnableFixedEvent: Test 1, HIGH
> klog Kernel message: [ 2.132392] ACPI Warning: Could not enable
> klog fixed event 3 (20090903/evxface-146)
> klog
> @@ -11689,34 +11668,34 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.149905] ACPI Error: Method parse
> -klog /execution failed [_SB_.C003.C099._DOD] (Node f30275a0),
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 2.149905] ACPI Error: Method parse/execution
> +klog failed [_SB_.C003.C099._DOD] (Node f30275a0),
> klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 2.173036] ACPI Warning for
> -klog _SB_._OSC: Return type mismatch - found Integer, expected
> -klog Buffer (20090903/nspredef-1006)
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 2.173036] ACPI Warning for _SB_._OSC:
> +klog Return type mismatch - found Integer, expected Buffer
> +klog (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 2.173935] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - C3, should be C2
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 2.173935] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - C3, should be C2 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.200371] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.200371] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node f602bf30),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11724,8 +11703,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.200380] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.200380] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node f602d2d0),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11733,8 +11712,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.206433] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.206433] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node f742d018),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11742,8 +11721,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.206443] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.206443] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node f742d3a8),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11751,17 +11730,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 2.222353] ACPI Error: [EABF]
> -klog Namespace lookup failure, AE_ALREADY_EXISTS (20110112
> -klog /dswload-802)
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 2.222353] ACPI Error: [EABF] Namespace
> +klog lookup failure, AE_ALREADY_EXISTS (20110112/dswload-802)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.222362] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.222362] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node f602d018),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11769,8 +11747,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.222372] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.222372] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node f602d3a8),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11778,44 +11756,44 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 2.227407] ACPI Error (psargs-0359): [GTF1] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 2.227407] ACPI Error (psargs-0359): [GTF1]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.227411] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SAT0.PRT1._SDD]
> -klog (Node f702b7b0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.227411] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
> +klog f702b7b0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.227454] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SAT0.PRT1._GTF]
> -klog (Node f702b7c8), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.227454] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
> +klog f702b7c8), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 2.229498] ACPI Warning:
> -klog Incorrect checksum in table [TAMG] - 0xC6, should be 0xC5
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 2.229498] ACPI Warning: Incorrect
> +klog checksum in table [TAMG] - 0xC6, should be 0xC5 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.231431] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.231431] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node f602bf60),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11823,8 +11801,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.231442] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.231442] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node f602d300),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11832,8 +11810,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.250291] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.250291] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT1.UBIF] (Node ffff88013762f550)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11841,8 +11819,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.250306] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.250306] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT1._BIF] (Node ffff88013762f500)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11850,8 +11828,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.270835] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.270835] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node ffff880125e2c708)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11859,79 +11837,79 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 2.280398] ACPI Error (dswload-0781)
> -klog : [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 2.280398] ACPI Error (dswload-0781):
> +klog [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.280410] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.BAT1.UBIF] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.280410] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.BAT1.UBIF] (Node
> klog ffff8800b3c2e100), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.280443] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.BAT1._BIF] (Node
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.280443] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.BAT1._BIF] (Node
> klog ffff8800b3c2e0c0), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 2.283579] ACPI Error (psargs-0359): [_T_0] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 2.283579] ACPI Error (psargs-0359): [_T_0]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.283585] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.BAT1.UBIF] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.283585] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.BAT1.UBIF] (Node
> klog ffff8800b3c2e100), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.283615] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._Q09]
> -klog (Node ffff8800b3c410e0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.283615] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._Q09] (Node
> +klog ffff8800b3c410e0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.288649] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
> -klog ffff88023f45dcd0), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.288649] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff88023f45dcd0),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.288685] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
> -klog ffff88023f45dcf8), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.288685] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff88023f45dcf8),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.294251] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.294251] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node f742bf30),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11939,8 +11917,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.294262] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.294262] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node f742d2d0),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -11948,17 +11926,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 2.324547] ACPI Error: [EABF]
> -klog Namespace lookup failure, AE_ALREADY_EXISTS (20110413
> -klog /dswload2-316)
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 2.324547] ACPI Error: [EABF] Namespace
> +klog lookup failure, AE_ALREADY_EXISTS (20110413/dswload2-316)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.324556] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.324556] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node f742d018),
> klog AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -11966,8 +11943,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.324566] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.324566] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node f742d3a8),
> klog AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -11975,113 +11952,115 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 2.334361] ACPI Error: Attempt to CreateField of length
> -klog zero (20110112/dsopcode-529)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 2.334361] ACPI Error: Attempt to CreateField of
> +klog length zero (20110112/dsopcode-529)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 2.334370] ACPI Error: Method parse/execution
> -klog failed [_SB_.PCI0.IDE0.RATA] (Node ffff8801376322a8),
> -klog AE_AML_OPERAND_VALUE (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 2.334370] ACPI Error: Method parse
> +klog /execution failed [_SB_.PCI0.IDE0.RATA] (Node
> +klog ffff8801376322a8), AE_AML_OPERAND_VALUE (20110112
> +klog /psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 2.334384] ACPI Error: Method parse/execution
> -klog failed [_SB_.PCI0.IDE0.PRT1._GTF] (Node ffff880137632438),
> -klog AE_AML_OPERAND_VALUE (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 2.334384] ACPI Error: Method parse
> +klog /execution failed [_SB_.PCI0.IDE0.PRT1._GTF] (Node
> +klog ffff880137632438), AE_AML_OPERAND_VALUE (20110112
> +klog /psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.336604] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.GFX0._DOD]
> -klog (Node ffff88013b63c460), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 2.336604] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
> +klog ffff88013b63c460), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.384172] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
> -klog ffff8801c305dcd0), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.384172] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff8801c305dcd0),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.384189] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
> -klog ffff8801c305dcf8), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.384189] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff8801c305dcf8),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 2.440684] ACPI Error (psargs-0359): [SMS_] Namespace
> -klog lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 2.440684] ACPI Error (psargs-0359): [SMS_]
> +klog Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.440692] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
> -klog (Node ffff88007db30c60), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.440692] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
> +klog ffff88007db30c60), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.462687] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
> -klog ffff880147646cd0), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.462687] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff880147646cd0),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.462711] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
> -klog ffff880147646cf8), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.462711] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880147646cf8),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.468708] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU1._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 2.468708] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
> klog f700f180), AE_INVALID_TABLE_LENGTH
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.468963] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.CPU2._PDC] (Node
> +klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
> +klog Kernel message: [ 2.468963] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_PR_.CPU2._PDC] (Node
> klog f700f240), AE_INVALID_TABLE_LENGTH
> klog
> klog ADVICE: The ACPI Method returned a table of the incorrect
> klog length. This can lead to unexepected results.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines
> klog _DOD but not _DOS
> klog
> @@ -12090,80 +12069,80 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.592359] ACPI Error: Method parse
> -klog /execution failed [_PR_.CPU0.PPC_] (Node ffff88014f9a4140)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.592359] ACPI Error: Method parse/execution
> +klog failed [_PR_.CPU0.PPC_] (Node ffff88014f9a4140),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.592381] ACPI Error: Method parse
> -klog /execution failed [_PR_.CPU0._PPC] (Node ffff88014f9a4028)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.592381] ACPI Error: Method parse/execution
> +klog failed [_PR_.CPU0._PPC] (Node ffff88014f9a4028),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.593071] ACPI Error: Method parse
> -klog /execution failed [_PR_.CPU1._PPC] (Node ffff88014f9a4118)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.593071] ACPI Error: Method parse/execution
> +klog failed [_PR_.CPU1._PPC] (Node ffff88014f9a4118),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.593648] ACPI Error: Method parse
> -klog /execution failed [_PR_.CPU2._PPC] (Node ffff88014f9a4370)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.593648] ACPI Error: Method parse/execution
> +klog failed [_PR_.CPU2._PPC] (Node ffff88014f9a4370),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.593935] ACPI Error: Method parse
> -klog /execution failed [_PR_.CPU3._PPC] (Node ffff88014f9a42d0)
> -klog , AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.593935] ACPI Error: Method parse/execution
> +klog failed [_PR_.CPU3._PPC] (Node ffff88014f9a42d0),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 2.634350] ACPI Error: [GTF1] Namespace lookup failure,
> -klog AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 2.634350] ACPI Error: [GTF1] Namespace lookup
> +klog failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.634355] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
> -klog f3431af8), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.634355] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f3431af8),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.634373] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
> -klog f3431b10), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.634373] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f3431b10),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.671117] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.671117] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node f2c2d018),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12171,8 +12150,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.671128] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.671128] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node f2c2d3a8),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12180,26 +12159,26 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.701908] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
> -klog f3831af8), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.701908] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f3831af8),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.701933] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
> -klog f3831b10), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.701933] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f3831b10),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.771747] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.771747] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node f402bf60),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12207,8 +12186,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.771758] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 2.771758] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node f402d300),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12216,7 +12195,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 2.787172] ACPI Warning: For
> klog _SB_.PCI0.P0P1._PRT: Return Package has no elements
> klog (empty) (20110112/nspredef-456)
> @@ -12225,32 +12204,32 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
> -klog Kernel message: [ 2.823916] ACPI Warning: _BQC returned an
> -klog invalid level 20090521 video-629
> +klog FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
> +klog HIGH Kernel message: [ 2.823916] ACPI Warning: _BQC
> +klog returned an invalid level 20090521 video-629
> klog
> klog ADVICE: Method _BQC (Brightness Query Current) returned an
> klog invalid display brightness level.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.837958] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
> -klog f7431858), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.837958] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f7431858),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.837994] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
> -klog f7431870), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.837994] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f7431870),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 2.838171] ACPI Warning for
> klog _SB_.BAT0._BIF: Return Package type mismatch at index 9 -
> klog found [NULL Object Descriptor], expected String/Buffer
> @@ -12260,60 +12239,59 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
> -klog Kernel message: [ 2.851027] ACPI Warning: _BQC returned an
> -klog invalid level (20110316/video-473)
> +klog FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
> +klog HIGH Kernel message: [ 2.851027] ACPI Warning: _BQC
> +klog returned an invalid level (20110316/video-473)
> klog
> klog ADVICE: Method _BQC (Brightness Query Current) returned an
> klog invalid display brightness level.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.860339] ACPI Error: Method parse
> -klog /execution failed [_SB_.C003.C098._DOD] (Node f4427588),
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 2.860339] ACPI Error: Method parse/execution
> +klog failed [_SB_.C003.C098._DOD] (Node f4427588),
> klog AE_AML_PACKAGE_LIMIT (20110413/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 2.861808] ACPI Error: [_SB_.PCI0.GFX0.DD02._BCL]
> -klog Namespace lookup failure, AE_NOT_FOUND (20110112
> -klog /psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 2.861808] ACPI Error:
> +klog [_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure,
> +klog AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.861812] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 2.861812] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node
> klog ffff88015746e168), AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 2.870589] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node
> -klog ffff880137632c80), AE_AML_PACKAGE_LIMIT (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 2.870589] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DOD] (Node ffff880137632c80),
> +klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 2.906610] ACPI Warning: For
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 2.906610] ACPI Warning: For
> klog _SB_.PCI0.P0P2.PEGP._DOD: Return type mismatch - found
> klog Integer, expected Package (20110413/nspredef-1053)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
> klog CRITICAL Kernel message: [ 2.949708] ACPI Error: Field
> klog [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits)
> klog (20110112/dsopcode-597)
> @@ -12322,8 +12300,8 @@ klog ADVICE: The field exceeds the allocated buffer size. This
> klog can lead to unexpected results when fetching data outside
> klog this region.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorSBOSCAEAMLBUFFERLIMIT: Test
> -klog 1, CRITICAL Kernel message: [ 2.949716] ACPI Error: Method
> +klog FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1,
> +klog CRITICAL Kernel message: [ 2.949716] ACPI Error: Method
> klog parse/execution failed [_SB_._OSC] (Node ffff880297016ca8)
> klog , AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> klog
> @@ -12333,70 +12311,70 @@ klog an 8 byte buffer of 2 x 32 DWORDs, however it appears that
> klog the method is possibly trying to access data outside this
> klog buffer. This is a bug in the _OSC method.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.005123] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_._OSC] (Node
> -klog ffff88122fc1ea00), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 3.005123] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_._OSC] (Node ffff88122fc1ea00)
> +klog , AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 3.033154] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 0x87, should be 0x84
> -klog (20100428/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 3.033154] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 0x87, should be 0x84 (20100428
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.112435] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_PR_.PPCE] (Node
> -klog f74257c8), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 3.112435] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.PPCE] (Node f74257c8),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.112465] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [EV4_] (Node f742c210),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 3.112465] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [EV4_] (Node f742c210),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.112494] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [SMIE] (Node f7427a20),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 3.112494] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [SMIE] (Node f7427a20),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.112522] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [NEVT] (Node f74279d8),
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 3.112522] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [NEVT] (Node f74279d8),
> klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.112549] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
> -klog (Node f7427690), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 3.112549] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
> +klog f7427690), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines
> klog _DOD but not _DOS
> klog
> @@ -12405,43 +12383,43 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.208822] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.C003.C098._DOD]
> -klog (Node ffff88007cf30b60), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 3.208822] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.C003.C098._DOD] (Node
> +klog ffff88007cf30b60), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.223518] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.GFX0._DOD]
> -klog (Node ffff880236c469a0), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 3.223518] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
> +klog ffff880236c469a0), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 3.382436] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 00, should be 7F
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 3.382436] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 00, should be 7F (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 3.382442] ACPI Warning:
> -klog Incorrect checksum in table [_RAT] - 00, should be 63
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 3.382442] ACPI Warning: Incorrect
> +klog checksum in table [_RAT] - 00, should be 63 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 3.420672] ACPI Warning for
> klog _TZ_.THRM._PSL: Return Package type mismatch at index 0 -
> klog found Processor, expected Reference (20100428
> @@ -12451,39 +12429,39 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 3.480092] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 3.480092] ACPI Warning for
> klog _SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found
> klog Integer, expected Buffer (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 3.490098] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 3.490098] ACPI Warning for
> klog _SB_.PCI0.SAT0.PRT1._GTF: Return type mismatch - found
> klog Integer, expected Buffer (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.490832] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PMI0._GHL] (Node
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 3.490832] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PMI0._GHL] (Node
> klog ffff88013bc2bdc0), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.490852] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PMI0._PMC] (Node
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 3.490852] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PMI0._PMC] (Node
> klog ffff88013bc2bd40), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorCouldNotEnable: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
> klog Kernel message: [ 3.502273] ACPI Error: Could not enable
> klog SleepButton event (20100428/evxfevnt-205)
> klog
> @@ -12491,25 +12469,25 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.601126] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.GFX0._DOD]
> -klog (Node f7420690), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 3.601126] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
> +klog f7420690), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 3.644168] ACPI Warning:
> -klog Incorrect checksum in table [TCPA] - 0xF8, should be 0x9C
> -klog (20110413/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 3.644168] ACPI Warning: Incorrect
> +klog checksum in table [TCPA] - 0xF8, should be 0x9C (20110413
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 3.663829] [Firmware Bug]: ACPI(GFX0) defines
> klog _DOD but not _DOS
> klog
> @@ -12518,34 +12496,33 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [HIGH] KlogACPIErrorEvaluatingBCMFailed: Test 1,
> -klog HIGH Kernel message: [ 3.675814] ACPI Error: Evaluating
> -klog _BCM failed (20100428/video-532)
> +klog FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel
> +klog message: [ 3.675814] ACPI Error: Evaluating _BCM failed
> +klog (20100428/video-532)
> klog
> -klog ADVICE: The ACPI engine has failed to execute the _BCM
> -klog Brightness Control Method. This will result in possibly
> -klog failing to set the display brightness level.
> +klog ADVICE: Could not set the brightness level, the ACPI
> +klog control _BCM failed to execute correctly.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.868794] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
> -klog f3831b58), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 3.868794] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3831b58),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.868812] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
> -klog f3831b70), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 3.868812] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3831b70),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.983031] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 3.983031] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node ffff88021d459028),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12553,8 +12530,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 3.983040] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 3.983040] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node ffff88021d459618)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12562,7 +12539,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines
> klog _DOD but not _DOS
> klog
> @@ -12571,17 +12548,17 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
> -klog , MEDIUM Kernel message: [ 4.046031] ACPI Warning:
> -klog Incorrect checksum in table [OEMB] - 4A, should be 47
> -klog (20090903/tbutils-314)
> +klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
> +klog MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect
> +klog checksum in table [OEMB] - 4A, should be 47 (20090903
> +klog /tbutils-314)
> klog
> klog ADVICE: The ACPI table listed above has an incorrect
> klog checksum, this could be a BIOS bug or due to table
> klog corruption.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.115197] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 4.115197] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node ffff88021d458eb0),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12589,8 +12566,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.115206] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 4.115206] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node ffff88021d4594b0)
> klog , AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12598,102 +12575,93 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.190434] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node
> -klog ffff8801376342f8), AE_AML_PACKAGE_LIMIT (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 4.190434] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DOD] (Node ffff8801376342f8),
> +klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.198699] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
> -klog f3831c00), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 4.198699] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f3831c00),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.198716] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
> -klog f3831c18), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 4.198716] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f3831c18),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIExceptionAETIMEReturnedByHandler:
> -klog Test 1, HIGH Kernel message: [ 4.230508] ACPI Exception:
> -klog AE_TIME, Returned by Handler for [EmbeddedControl]
> -klog (20090903/evregion-424)
> +klog FAILED [HIGH] KlogAcpiRegionHandlerError: Test 1, HIGH
> +klog Kernel message: [ 4.230508] ACPI Exception: AE_TIME,
> +klog Returned by Handler for [EmbeddedControl] (20090903
> +klog /evregion-424)
> klog
> -klog ADVICE: This is most probably caused by when a read or
> -klog write operation to the EC memory has failed because of a
> -klog timeout waiting for the Embedded Controller to complete
> -klog the transaction. Normally, the kernel waits for 500ms for
> -klog the Embedded Controller status port to indicate that a
> -klog transaction is complete, but in this case it has not and a
> -klog AE_TIME error has been returned.
> +klog ADVICE: The ACPI driver detected an error returned by a
> +klog region handler.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.230527] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.ISAB.ECDV.ECR1]
> -klog (Node f7018ed0), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 4.230527] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.ISAB.ECDV.ECR1] (Node
> +klog f7018ed0), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.230612] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.ISAB.ECDV.ECR2]
> -klog (Node f7018ee8), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 4.230612] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.ISAB.ECDV.ECR2] (Node
> +klog f7018ee8), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.230643] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [ECRW] (Node f7018fa8),
> -klog AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 4.230643] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECRW] (Node f7018fa8), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.230672] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [ECG1] (Node f7018fd8),
> -klog AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 4.230672] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECG1] (Node f7018fd8), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.230701] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [NEVT] (Node f70186f0),
> -klog AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 4.230701] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [NEVT] (Node f70186f0), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.230730] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.ISAB.ECDV._Q66]
> -klog (Node f7018eb8), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 4.230730] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.ISAB.ECDV._Q66] (Node
> +klog f7018eb8), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 4.576415] ACPI Error: No handler for
> klog Region [ERAM] (f4830d50) [EmbeddedControl] (20110112
> klog /evregion-369)
> @@ -12702,8 +12670,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.576437] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 4.576437] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
> klog f48326d8), AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -12711,8 +12679,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.638115] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 4.638115] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node ffff880220c5b028),
> klog AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -12720,8 +12688,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.638127] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 4.638127] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node ffff880220c5b618)
> klog , AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -12729,35 +12697,35 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.838935] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_TZ_.C2E8] (Node
> -klog f701b108), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 4.838935] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_TZ_.C2E8] (Node f701b108),
> +klog AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.838984] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_TZ_.C2E7] (Node
> -klog f701b0f0), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 4.838984] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_TZ_.C2E7] (Node f701b0f0),
> +klog AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.839033] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_TZ_.TZ2_._TMP] (Node
> -klog f701b7c8), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 4.839033] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_TZ_.TZ2_._TMP] (Node f701b7c8),
> +klog AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.890970] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 4.890970] ACPI Error: Method parse
> klog /execution failed [_SB_.EEAC] (Node ffff880126e43f50),
> klog AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -12765,8 +12733,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 4.890980] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 4.890980] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT2._STA] (Node ffff880126e44550)
> klog , AE_ALREADY_EXISTS (20110413/psparse-536)
> klog
> @@ -12774,7 +12742,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines
> klog _DOD but not _DOS
> klog
> @@ -12783,7 +12751,7 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 5.150560] ACPI Warning for
> klog _SB_.BAT0._BIF: Return Package type mismatch at index 12 -
> klog found Integer, expected String/Buffer (20090903
> @@ -12793,17 +12761,17 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 5.332663] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node f4425450),
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 5.332663] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DOD] (Node f4425450),
> klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 6.224974] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 6.224974] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node
> klog f3423438), AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12811,8 +12779,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 6.224987] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 6.224987] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node
> klog f3423420), AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12820,8 +12788,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 6.227917] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 6.227917] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node
> klog f34235b8), AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12829,8 +12797,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 6.227930] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 6.227930] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node
> klog f34235a0), AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12838,17 +12806,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 6.732287] ACPI Error: [_T_0]
> -klog Namespace lookup failure, AE_ALREADY_EXISTS (20110112
> -klog /dswload-802)
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 6.732287] ACPI Error: [_T_0] Namespace
> +klog lookup failure, AE_ALREADY_EXISTS (20110112/dswload-802)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 6.732310] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 6.732310] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT1.UBIF] (Node dd028fc0),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12856,8 +12823,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 6.732334] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 6.732334] ACPI Error: Method parse
> klog /execution failed [_SB_.BAT1._BIF] (Node dd028f90),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12865,17 +12832,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 6.773266] ACPI Error: [CAPB]
> -klog Namespace lookup failure, AE_ALREADY_EXISTS (20101013
> -klog /dsfield-143)
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 6.773266] ACPI Error: [CAPB] Namespace
> +klog lookup failure, AE_ALREADY_EXISTS (20101013/dsfield-143)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 6.773285] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 6.773285] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node ddc25ca8),
> klog AE_ALREADY_EXISTS (20101013/psparse-537)
> klog
> @@ -12883,7 +12849,7 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
> klog Kernel message: [ 7.365139] ACPI Error: No handler for
> klog Region [IPMI] (ffff8805ffa37240) [IPMI] (20110112
> klog /evregion-369)
> @@ -12892,16 +12858,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
> -klog message: [ 7.365150] ACPI Error: Region IPMI(0x7) has no
> -klog handler (20110112/exfldio-292)
> +klog FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
> +klog Kernel message: [ 7.365150] ACPI Error: Region IPMI(0x7)
> +klog has no handler (20110112/exfldio-292)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 7.365161] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 7.365161] ACPI Error: Method parse
> klog /execution failed [_SB_.PMI0._GHL] (Node ffff8805ffa36b18)
> klog , AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -12909,8 +12875,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 7.365181] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
> +klog Kernel message: [ 7.365181] ACPI Error: Method parse
> klog /execution failed [_SB_.PMI0._PMC] (Node ffff8805ffa36a78)
> klog , AE_NOT_EXIST (20110112/psparse-536)
> klog
> @@ -12918,52 +12884,50 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 8.137284] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
> -klog (Node f702e720), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 8.137284] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
> +klog f702e720), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 8.137317] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [ECRB] (Node f702e7f8),
> -klog AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 8.137317] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECRB] (Node f702e7f8), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 8.137344] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [EC0A] (Node f702ea08),
> -klog AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 8.137344] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [EC0A] (Node f702ea08), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 8.137370] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.AMW0._WED] (Node
> -klog f7019ca8), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 8.137370] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.AMW0._WED] (Node f7019ca8),
> +klog AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 8.227953] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.C003.C098._DOD]
> -klog (Node f7021588), AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 8.227953] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.C003.C098._DOD] (Node
> +klog f7021588), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines
> klog _DOD but not _DOS
> klog
> @@ -12972,8 +12936,8 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 8.794633] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 8.794633] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0._OSC] (Node f5824ab0),
> klog AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -12981,43 +12945,41 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.141980] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
> -klog (Node f702e690), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 9.141980] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
> +klog f702e690), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.142017] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [ECRB] (Node f702e768),
> -klog AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 9.142017] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECRB] (Node f702e768), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.142046] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [EC0A] (Node f702e978),
> -klog AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 9.142046] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [EC0A] (Node f702e978), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.142076] ACPI Error (psparse-0537)
> -klog : Method parse/execution failed [_SB_.AMW0._WED] (Node
> -klog f7019420), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 9.142076] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.AMW0._WED] (Node f7019420),
> +klog AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
> klog HIGH Kernel message: [ 9.267040] ACPI Warning for
> klog _SB_.SPM_._PMD: Return Package type mismatch at index 0 -
> klog found String, expected Reference (20090903/nspredef-1012)
> @@ -13026,123 +12988,118 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with incorrectly typed data. The
> klog offending method needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.391036] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.IBCM] (Node f3828738),
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 9.391036] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.IBCM] (Node f3828738),
> klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.391049] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node
> -klog f3824b28), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 9.391049] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0.DD03._BCM] (Node f3824b28),
> +klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorEvaluatingBCMFailed: Test 1,
> -klog HIGH Kernel message: [ 9.391061] ACPI Error: Evaluating
> -klog _BCM failed (20110112/video-365)
> +klog FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel
> +klog message: [ 9.391061] ACPI Error: Evaluating _BCM failed
> +klog (20110112/video-365)
> klog
> -klog ADVICE: The ACPI engine has failed to execute the _BCM
> -klog Brightness Control Method. This will result in possibly
> -klog failing to set the display brightness level.
> +klog ADVICE: Could not set the brightness level, the ACPI
> +klog control _BCM failed to execute correctly.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 9.393479] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 9.393479] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88012d8cfee8
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.393498] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
> -klog ffff88012f83e6b8), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 9.393498] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node ffff88012f83e6b8),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.393510] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
> -klog ffff88012f83e690), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 9.393510] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0.DD02._BQC] (Node ffff88012f83e690),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 9.394098] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 9.394098] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88012d8cfd38
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.394109] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node
> -klog ffff88012f83e6e0), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 9.394109] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node ffff88012f83e6e0),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.394118] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0.DD02._BCM] (Node
> -klog ffff88012f83e668), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 9.394118] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0.DD02._BCM] (Node ffff88012f83e668),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.957372] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
> -klog ffff88007af33780), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 9.957372] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node ffff88007af33780),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.957372] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
> -klog ffff88007af33910), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 9.957372] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node ffff88007af33910),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.957372] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
> -klog ffff88007af32b68), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 9.957372] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SATA.CHN0._GTM] (Node ffff88007af32b68),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 9.957372] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
> -klog ffff88007af32cf8), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 9.957372] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.SATA.CHN1._GTM] (Node ffff88007af32cf8),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines
> klog _DOD but not _DOS
> klog
> @@ -13151,43 +13108,41 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 10.120967] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 10.120967] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88023bcba438
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.120977] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DSM] (Node
> -klog ffff88023f45edc0), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 10.120977] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DSM] (Node ffff88023f45edc0),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 10.121007] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 10.121007] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88023bcba1b0
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.121018] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.PEG0.GFX0._DSM] (Node
> -klog ffff88023f474370), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 10.121018] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.PEG0.GFX0._DSM] (Node ffff88023f474370),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 10.194089] ACPI Warning for
> klog _SB_.PCI0.PCIB._PRT: Return Package has no elements
> klog (empty) (20100428/nspredef-456)
> @@ -13196,51 +13151,49 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 10.289821] ACPI Error (psargs-0359): [_PR_.CPU0._CST]
> -klog Namespace lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 10.289821] ACPI Error (psargs-0359):
> +klog [_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.289828] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_PR_.CPU1._CST] (Node f70c3288), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 10.289828] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.CPU1._CST] (Node f70c3288),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorSMBusOrIPMI: Test 1, HIGH
> -klog Kernel message: [ 10.344782] ACPI Error: SMBus or IPMI
> -klog write requires Buffer of length 42, found length 20
> +klog FAILED [HIGH] KlogAcpiIncorrectWriteBufferSize: Test 1,
> +klog HIGH Kernel message: [ 10.344782] ACPI Error: SMBus or
> +klog IPMI write requires Buffer of length 42, found length 20
> klog (20090903/exfield-286)
> klog
> klog ADVICE: An incorrect SMBus or IPMI write buffer size was
> klog used.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.344788] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PMI0._GHL] (Node ffff88122fc1ece0),
> -klog AE_AML_BUFFER_LIMIT
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 10.344788] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PMI0._GHL] (Node
> +klog ffff88122fc1ece0), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.344812] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PMI0._PMC] (Node ffff88122fc1ec60),
> -klog AE_AML_BUFFER_LIMIT
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 10.344812] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PMI0._PMC] (Node
> +klog ffff88122fc1ec60), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 10.380244] ACPI Warning
> klog (nspredef-0357): _SB_.PCI0.VID2._DOD: Return Package has
> klog no elements (empty) [20080926]
> @@ -13249,471 +13202,442 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 10.680422] ACPI Error: Method parse/execution
> -klog failed [_SB_.PCI0.GFX0.DD02._BCM] (Node ffff880117642ed8),
> -klog AE_AML_INFINITE_LOOP (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 10.680422] ACPI Error: Method parse
> +klog /execution failed [_SB_.PCI0.GFX0.DD02._BCM] (Node
> +klog ffff880117642ed8), AE_AML_INFINITE_LOOP (20110112
> +klog /psparse-536)
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.692650] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.ECDV.ECR2] (Node f702e738), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.692650] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR2] (Node
> +klog f702e738), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.692684] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECRW] (Node
> -klog f702e810), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.692684] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECRW] (Node f702e810), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.692710] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECG1] (Node
> -klog f702e840), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.692710] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECG1] (Node f702e840), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.692735] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [NEVT] (Node
> -klog f702ea50), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.692735] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [NEVT] (Node f702ea50), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.692761] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.ECDV._Q66] (Node f702e708), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.692761] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
> +klog f702e708), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.708822] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.ECDV.ECR1] (Node f7427738), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.708822] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
> +klog f7427738), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.708876] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECRB] (Node
> -klog f7427810), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.708876] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECRB] (Node f7427810), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.708908] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [EC0A] (Node
> -klog f7427a20), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.708908] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [EC0A] (Node f7427a20), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.708939] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.AMW0._WED] (Node f742c078), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.708939] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.AMW0._WED] (Node f742c078),
> +klog AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.724353] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880213050d00),
> -klog AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.724353] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
> +klog ffff880213050d00), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.724416] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECRB] (Node
> -klog ffff880213050e20), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.724416] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECRB] (Node ffff880213050e20), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.724449] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [EC0A] (Node
> -klog ffff8802130520e0), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.724449] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [EC0A] (Node ffff8802130520e0), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 10.724482] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.AMW0._WED] (Node ffff8802130573c0), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 10.724482] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.AMW0._WED] (Node ffff8802130573c0)
> +klog , AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 11.195653] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECG5] (Node
> -klog f702e8a0), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 11.195653] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECG5] (Node f702e8a0), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 11.195680] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.AC__._PSR] (Node f702ec90), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 11.195680] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.AC__._PSR] (Node f702ec90),
> +klog AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 11.383565] ACPI Error: Method parse
> -klog /execution failed [_SB_.C003.C098._DOD] (Node
> -klog ffff880137636938), AE_AML_PACKAGE_LIMIT (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 11.383565] ACPI Error: Method parse/execution
> +klog failed [_SB_.C003.C098._DOD] (Node ffff880137636938),
> +klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 11.660551] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.ECDV.ECR2] (Node f702e6a8), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 11.660551] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR2] (Node
> +klog f702e6a8), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 11.660591] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECRW] (Node
> -klog f702e780), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 11.660591] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECRW] (Node f702e780), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 11.660615] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECG1] (Node
> -klog f702e7b0), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 11.660615] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECG1] (Node f702e7b0), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 11.660638] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [NEVT] (Node
> -klog f702e9c0), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 11.660638] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [NEVT] (Node f702e9c0), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 11.660661] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.ECDV._Q66] (Node f702e678), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 11.660661] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
> +klog f702e678), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 11.800514] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node
> -klog ffff8801376342a8), AE_AML_PACKAGE_LIMIT (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 11.800514] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DOD] (Node ffff8801376342a8),
> +klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 11.880473] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 11.880473] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88012125f558
> klog (20110413/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 11.880998] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 11.880998] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88012125f3a8
> klog (20110413/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 11.915871] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_SB_.PCI0.SWFS] (Node
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 11.915871] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.SWFS] (Node
> klog ffff880226c49320), AE_AML_INFINITE_LOOP
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 11.915905] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_SB_.PCI0.RBYT] (Node
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 11.915905] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.RBYT] (Node
> klog ffff880226c493c0), AE_AML_INFINITE_LOOP
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 11.915932] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_SB_.PCI0.ASOC.SECV] (Node
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 11.915932] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.ASOC.SECV] (Node
> klog ffff880226c4a0e0), AE_AML_INFINITE_LOOP
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 11.915960] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_SB_.PCI0.ASOC.RVLT] (Node
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 11.915960] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.ASOC.RVLT] (Node
> klog ffff880226c49b00), AE_AML_INFINITE_LOOP
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 12.160904] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECG5] (Node
> -klog f702e810), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 12.160904] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECG5] (Node f702e810), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 12.160929] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.AC__._PSR] (Node f702ec00), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 12.160929] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.AC__._PSR] (Node f702ec00),
> +klog AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 12.167076] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 12.167076] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff8800b1753048
> klog (20090903/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 12.167089] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.GFX0.DD02.GBQC] (Node ffff8800b3c44ca0),
> -klog AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 12.167089] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
> +klog ffff8800b3c44ca0), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 12.167143] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.GFX0.DD02._BQC] (Node ffff8800b3c44c80),
> -klog AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 12.167143] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
> +klog ffff8800b3c44c80), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrorEvaluating: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
> klog Kernel message: [ 12.167205] ACPI Warning: Evaluating _BQC
> klog failed (20090903/video-641)
> klog
> klog ADVICE: Executing the ACPI Method leaded in an execution
> klog failure. This needs investigating.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 12.242368] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 12.242368] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88012ea6e6c0
> klog (20110413/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 12.242387] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
> -klog ffff88013113f6b8), AE_AML_OPERAND_TYPE (20110413
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 12.242387] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node ffff88013113f6b8),
> +klog AE_AML_OPERAND_TYPE (20110413/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 12.242397] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
> -klog ffff88013113f690), AE_AML_OPERAND_TYPE (20110413
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 12.242397] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0.DD02._BQC] (Node ffff88013113f690),
> +klog AE_AML_OPERAND_TYPE (20110413/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrorEvaluating: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
> klog Kernel message: [ 12.242409] ACPI Warning: Evaluating _BQC
> klog failed (20110413/video-484)
> klog
> klog ADVICE: Executing the ACPI Method leaded in an execution
> klog failure. This needs investigating.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 12.242974] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 12.242974] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88012ea6e5e8
> klog (20110413/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 12.242986] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node
> -klog ffff88013113f6e0), AE_AML_OPERAND_TYPE (20110413
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 12.242986] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node ffff88013113f6e0),
> +klog AE_AML_OPERAND_TYPE (20110413/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 12.242994] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0.DD02._BCM] (Node
> -klog ffff88013113f668), AE_AML_OPERAND_TYPE (20110413
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 12.242994] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0.DD02._BCM] (Node ffff88013113f668),
> +klog AE_AML_OPERAND_TYPE (20110413/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorEvaluatingBCMFailed: Test 1,
> -klog HIGH Kernel message: [ 12.243002] ACPI Error: Evaluating
> -klog _BCM failed (20110413/video-365)
> +klog FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel
> +klog message: [ 12.243002] ACPI Error: Evaluating _BCM failed
> +klog (20110413/video-365)
> klog
> -klog ADVICE: The ACPI engine has failed to execute the _BCM
> -klog Brightness Control Method. This will result in possibly
> -klog failing to set the display brightness level.
> +klog ADVICE: Could not set the brightness level, the ACPI
> +klog control _BCM failed to execute correctly.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 12.361137] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.C003.C09D._DOD] (Node ffff88013b630c00),
> -klog AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 12.361137] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.C003.C09D._DOD] (Node
> +klog ffff88013b630c00), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 12.390421] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECG5] (Node
> -klog ffff880213050f00), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 12.390421] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECG5] (Node ffff880213050f00), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 12.390446] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.AC__._PSR] (Node ffff880213052440), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 12.390446] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.AC__._PSR] (Node ffff880213052440)
> +klog , AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 12.553637] ACPI Warning: For
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 12.553637] ACPI Warning: For
> klog _SB_.PCI0.P0P2.PEGP._DOD: Return type mismatch - found
> klog Integer, expected Package (20110112/nspredef-1053)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIExceptionAETIMEReturnedByHandler:
> -klog Test 1, HIGH Kernel message: [ 12.838979] cfg80211:
> -klog Ignoring regulatory request Set by core since the driver
> -klog uses its own custom regulatory domain ACPI Exception:
> -klog AE_TIME, Returned by Handler for [EmbeddedControl]
> -klog (20110112/evregion-474)
> -klog
> -klog ADVICE: This is most probably caused by when a read or
> -klog write operation to the EC memory has failed because of a
> -klog timeout waiting for the Embedded Controller to complete
> -klog the transaction. Normally, the kernel waits for 500ms for
> -klog the Embedded Controller status port to indicate that a
> -klog transaction is complete, but in this case it has not and a
> -klog AE_TIME error has been returned.
> -klog
> -klog FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
> -klog Kernel message: [ 12.841008] cfg80211: Ignoring regulatory
> +klog FAILED [HIGH] KlogAcpiRegionHandlerError: Test 1, HIGH
> +klog Kernel message: [ 12.838979] cfg80211: Ignoring regulatory
> klog request Set by core since the driver uses its own custom
> -klog regulatory domain ACPI Warning: _BQC returned an invalid
> -klog level (20110112/video-473)
> +klog regulatory domain ACPI Exception: AE_TIME, Returned by
> +klog Handler for [EmbeddedControl] (20110112/evregion-474)
> +klog
> +klog ADVICE: The ACPI driver detected an error returned by a
> +klog region handler.
> +klog
> +klog FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
> +klog HIGH Kernel message: [ 12.841008] cfg80211: Ignoring
> +klog regulatory request Set by core since the driver uses its
> +klog own custom regulatory domain ACPI Warning: _BQC returned
> +klog an invalid level (20110112/video-473)
> klog
> klog ADVICE: Method _BQC (Brightness Query Current) returned an
> klog invalid display brightness level.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 13.024512] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node f7425450),
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 13.024512] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DOD] (Node f7425450),
> klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 13.396787] ACPI Error: Method parse
> -klog /execution failed [_SB_.ADP1._PSR] (Node ffff88011763ba00)
> -klog , AE_TIME (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 13.396787] ACPI Error: Method parse/execution failed
> +klog [_SB_.ADP1._PSR] (Node ffff88011763ba00), AE_TIME
> +klog (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
> +klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
> klog CRITICAL Kernel message: [ 13.445954] ACPI Error: Field
> klog [D128] at 1040 exceeds Buffer [NULL] size 160 (bits)
> klog (20110112/dsopcode-597)
> @@ -13722,67 +13646,67 @@ klog ADVICE: The field exceeds the allocated buffer size. This
> klog can lead to unexpected results when fetching data outside
> klog this region.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 13.445980] ACPI Error: Method parse
> -klog /execution failed [_SB_.WMID.HWMC] (Node f742a8b8),
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 13.445980] ACPI Error: Method parse/execution
> +klog failed [_SB_.WMID.HWMC] (Node f742a8b8),
> klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 13.446019] ACPI Error: Method parse
> -klog /execution failed [_SB_.WMID.WMAD] (Node f742aac8),
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 13.446019] ACPI Error: Method parse/execution
> +klog failed [_SB_.WMID.WMAD] (Node f742aac8),
> klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 13.452167] ACPI Error (psargs-0359): [_PR_.C001]
> -klog Namespace lookup failure, AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 13.452167] ACPI Error (psargs-0359):
> +klog [_PR_.C001] Namespace lookup failure, AE_NOT_FOUND
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 13.452177] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPC0.EC0_.TPAF] (Node f702bde0), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 13.452177] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPC0.EC0_.TPAF] (Node
> +klog f702bde0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 13.452213] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPC0.EC0_.TBOM] (Node f702bdf8), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 13.452213] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPC0.EC0_.TBOM] (Node
> +klog f702bdf8), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 13.452247] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPC0.EC0_._Q1D] (Node f702ba98), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 13.452247] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPC0.EC0_._Q1D] (Node
> +klog f702ba98), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
> -klog Kernel message: [ 14.013275] ACPI Warning: _BQC returned
> -klog an invalid level (20110112/video-473)
> +klog FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
> +klog HIGH Kernel message: [ 14.013275] ACPI Warning: _BQC
> +klog returned an invalid level (20110112/video-473)
> klog
> klog ADVICE: Method _BQC (Brightness Query Current) returned an
> klog invalid display brightness level.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 14.175645] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 14.175645] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.OVGA.DD03.GBQC] (Node
> klog f44247e0), AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -13790,8 +13714,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 14.175656] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 14.175656] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.OVGA.DD03._BQC] (Node
> klog f44247c8), AE_ALREADY_EXISTS (20110112/psparse-536)
> klog
> @@ -13799,103 +13723,100 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrorEvaluating: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
> klog Kernel message: [ 14.175667] ACPI Warning: Evaluating _BQC
> klog failed (20110112/video-484)
> klog
> klog ADVICE: Executing the ACPI Method leaded in an execution
> klog failure. This needs investigating.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 14.885219] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 14.885219] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88013c6b58b8
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 14.885234] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DSM] (Node
> -klog ffff88013f849eb0), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 14.885234] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DSM] (Node ffff88013f849eb0),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 14.885277] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 14.885277] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88013c6b5828
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 14.885289] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node
> -klog ffff88013f86f668), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 14.885289] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node ffff88013f86f668),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 15.027464] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [_PR_.PPCE]
> -klog (Node ffff880075137920), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 15.027464] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_PR_.PPCE] (Node ffff880075137920)
> +klog , AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 15.027505] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [EV4_] (Node
> -klog ffff880075140660), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 15.027505] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [EV4_] (Node ffff880075140660),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 15.027542] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [SMIE] (Node
> -klog ffff88007513b180), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 15.027542] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [SMIE] (Node ffff88007513b180),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 15.027579] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [NEVT] (Node
> -klog ffff88007513b120), AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 15.027579] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [NEVT] (Node ffff88007513b120),
> +klog AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 15.027616] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.ECDV._Q66] (Node ffff880075139cc0),
> -klog AE_NOT_FOUND
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 15.027616] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
> +klog ffff880075139cc0), AE_NOT_FOUND
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
> -klog Kernel message: [ 15.287082] ACPI Warning: _BQC returned
> -klog an invalid level (20100428/video-640)
> +klog FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
> +klog HIGH Kernel message: [ 15.287082] ACPI Warning: _BQC
> +klog returned an invalid level (20100428/video-640)
> klog
> klog ADVICE: Method _BQC (Brightness Query Current) returned an
> klog invalid display brightness level.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 15.395484] [Firmware Bug]: ACPI(PEGP) defines
> klog _DOD but not _DOS
> klog
> @@ -13904,44 +13825,43 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 15.846531] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.GFX0._DOD] (Node ffff8800b3840360),
> -klog AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 15.846531] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
> +klog ffff8800b3840360), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 16.336080] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.EC0_._Q33] (Node f70244b0), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 16.336080] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.EC0_._Q33] (Node
> +klog f70244b0), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 16.592600] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_SB_.PCI0.ASOC.SEFA] (Node
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 16.592600] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.ASOC.SEFA] (Node
> klog ffff880226c4a120), AE_AML_INFINITE_LOOP
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
> -klog message: [ 16.592628] ACPI Error (psparse-0537): Method
> -klog parse/execution failed [_SB_.PCI0.ASOC.RFAN] (Node
> +klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
> +klog Kernel message: [ 16.592628] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.ASOC.RFAN] (Node
> klog ffff880226c49bc0), AE_AML_INFINITE_LOOP
> klog
> klog ADVICE: The ACPI engine has failed to execute some AML.
> klog The error message above lists the method that caused this
> klog error.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
> +klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
> klog HIGH Kernel message: [ 16.719798] ACPI Warning for
> klog _SB_.PCI0.VID2._DOD: Return Package has no elements
> klog (empty) (20090903/nspredef-433)
> @@ -13950,150 +13870,143 @@ klog ADVICE: ACPI AML interpreter executed a Method that
> klog returned a package with no elements inside it. This is
> klog most probably a bug in the Method and needs to be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
> -klog HIGH Kernel message: [ 16.942589] ACPI Error
> -klog (dswload-0802): [_T_0] Namespace lookup failure,
> -klog AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
> +klog Kernel message: [ 16.942589] ACPI Error (dswload-0802):
> +klog [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 16.942606] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.OVGA.DD03.GBQC] (Node ffff8800b7e3c6e0),
> -klog AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 16.942606] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.OVGA.DD03.GBQC]
> +klog (Node ffff8800b7e3c6e0), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 16.942654] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.OVGA.DD03._BQC] (Node ffff8800b7e3c6c0),
> -klog AE_ALREADY_EXISTS
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 16.942654] ACPI Error (psparse-0537):
> +klog Method parse/execution failed [_SB_.PCI0.OVGA.DD03._BQC]
> +klog (Node ffff8800b7e3c6c0), AE_ALREADY_EXISTS
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 17.125601] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 17.125601] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] eee27810
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 17.125618] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DSM] (Node f7431fa8),
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 17.125618] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DSM] (Node f7431fa8),
> klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 17.125669] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 17.125669] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] eee27780
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 17.125690] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node
> -klog f7445c78), AE_AML_OPERAND_TYPE (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 17.125690] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node f7445c78),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 17.802564] ACPI Error: Method parse
> -klog /execution failed [_SB_.WMID.HWMC] (Node ffff8801ffc5c078)
> -klog , AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 17.802564] ACPI Error: Method parse/execution
> +klog failed [_SB_.WMID.HWMC] (Node ffff8801ffc5c078),
> +klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 17.802574] ACPI Error: Method parse
> -klog /execution failed [_SB_.WMID.WMAD] (Node ffff8801ffc5c258)
> -klog , AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 17.802574] ACPI Error: Method parse/execution
> +klog failed [_SB_.WMID.WMAD] (Node ffff8801ffc5c258),
> +klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 17.847665] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node
> -klog f444ebe8), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 17.847665] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node f444ebe8),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 17.985672] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.IBCM] (Node ffff8800b3832600),
> -klog AE_AML_BUFFER_LIMIT
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 17.985672] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.IBCM] (Node
> +klog ffff8800b3832600), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 17.985723] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.GFX0.DD03._BCM] (Node ffff8800b382b840),
> -klog AE_AML_BUFFER_LIMIT
> +klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
> +klog message: [ 17.985723] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node
> +klog ffff8800b382b840), AE_AML_BUFFER_LIMIT
> klog
> klog ADVICE: Method failed: ResourceSourceIndex is present but
> klog ResourceSource is not.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 18.054842] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 18.054842] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff880133a777e0
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 18.054860] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.VGA_._DSM] (Node
> -klog ffff880137659190), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 18.054860] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.VGA_._DSM] (Node ffff880137659190),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 18.054909] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 18.054909] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff880133a776c0
> klog (20110112/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 18.054932] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
> -klog ffff88013765d230), AE_AML_OPERAND_TYPE (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 18.054932] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013765d230),
> +klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 18.353938] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 18.353938] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node
> klog ffff88013762f708), AE_ALREADY_EXISTS (20110112
> klog /psparse-536)
> @@ -14102,8 +14015,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 18.353954] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 18.353954] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node
> klog ffff88013762f6e0), AE_ALREADY_EXISTS (20110112
> klog /psparse-536)
> @@ -14112,8 +14025,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 18.367485] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 18.367485] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node
> klog ffff88013762f988), AE_ALREADY_EXISTS (20110112
> klog /psparse-536)
> @@ -14122,8 +14035,8 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 18.367501] ACPI Error: Method parse
> +klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog Kernel message: [ 18.367501] ACPI Error: Method parse
> klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node
> klog ffff88013762f960), AE_ALREADY_EXISTS (20110112
> klog /psparse-536)
> @@ -14132,139 +14045,133 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 18.720899] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.GFX0._DOD] (Node f70206d8),
> -klog AE_AML_PACKAGE_LIMIT
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 18.720899] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
> +klog f70206d8), AE_AML_PACKAGE_LIMIT
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 19.086127] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.ECDV.ECR1] (Node f702e6a8), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 19.086127] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
> +klog f702e6a8), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 19.086176] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECRB] (Node
> -klog f702e780), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 19.086176] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECRB] (Node f702e780), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 19.086202] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [EC0A] (Node
> -klog f702e990), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 19.086202] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [EC0A] (Node f702e990), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 19.086228] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.AMW0._WED] (Node f7019fd8), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 19.086228] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.AMW0._WED] (Node f7019fd8),
> +klog AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 19.408610] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node f74256a8),
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 19.408610] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DOD] (Node f74256a8),
> klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 20.135790] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 20.135790] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88023b491318
> klog (20110316/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 20.135804] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DSM] (Node
> -klog ffff88023ec61eb0), AE_AML_OPERAND_TYPE (20110316
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 20.135804] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DSM] (Node ffff88023ec61eb0),
> +klog AE_AML_OPERAND_TYPE (20110316/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 20.135849] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 20.135849] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff88023b491708
> klog (20110316/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 20.135864] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node
> -klog ffff88023ec77668), AE_AML_OPERAND_TYPE (20110316
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 20.135864] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node ffff88023ec77668),
> +klog AE_AML_OPERAND_TYPE (20110316/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 20.149010] ACPI Error: Needed [Integer/String/Buffer],
> -klog found [Package] f741ed48 (20100428/exresop-422)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 20.149010] ACPI Error: Needed [Integer/String
> +klog /Buffer], found [Package] f741ed48 (20100428/exresop-422)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 20.149032] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.P0P2.PEGP.LCD_._BQC] (Node f741f978),
> -klog AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 20.149032] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.P0P2.PEGP.LCD_._BQC]
> +klog (Node f741f978), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningErrorEvaluating: Test 1, HIGH
> +klog FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
> klog Kernel message: [ 20.149063] ACPI Warning: Evaluating _BQC
> klog failed (20100428/video-651)
> klog
> klog ADVICE: Executing the ACPI Method leaded in an execution
> klog failure. This needs investigating.
> klog
> -klog FAILED [HIGH] KlogFirmwareBugBCQIsUsed: Test 1, HIGH
> -klog Kernel message: [ 20.298134] [Firmware Bug]: _BCQ is used
> -klog instead of _BQC
> +klog FAILED [HIGH] KlogAcpiBcqInsteadOfBqc: Test 1, HIGH Kernel
> +klog message: [ 20.298134] [Firmware Bug]: _BCQ is used instead
> +klog of _BQC
> klog
> klog ADVICE: ACPI Method _BCQ was defined (typo) instead of
> klog _BQC - this should be fixed.however the kernel has
> klog detected this and is working around this typo.
> klog
> -klog FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
> -klog Kernel message: [ 20.342464] ACPI Warning: _BQC returned
> -klog an invalid level (20110413/video-473)
> +klog FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
> +klog HIGH Kernel message: [ 20.342464] ACPI Warning: _BQC
> +klog returned an invalid level (20110413/video-473)
> klog
> klog ADVICE: Method _BQC (Brightness Query Current) returned an
> klog invalid display brightness level.
> klog
> -klog FAILED [MEDIUM] KlogFirmwareBugDuplicateACPIVideo: Test 1,
> +klog FAILED [MEDIUM] KlogAcpiDuplicateAcpiVideoBus: Test 1,
> klog MEDIUM Kernel message: [ 20.435766] [Firmware Bug]:
> klog Duplicate ACPI video bus devices for the same VGA
> klog controller, please try module parameter
> @@ -14275,89 +14182,84 @@ klog ADVICE: Try video module parameter
> klog video.allow_duplicates=1 if the current driver does't
> klog work.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 20.634744] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 20.634744] ACPI Warning for
> klog _SB_.PCI0.GFX0.DD02._BQC: Return type mismatch - found
> klog Reference, expected Integer (20100428/nspredef-1053)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 21.460488] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node
> -klog ffff880133632c80), AE_AML_PACKAGE_LIMIT (20110112
> -klog /psparse-536)
> +klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
> +klog message: [ 21.460488] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.GFX0._DOD] (Node ffff880133632c80),
> +klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 21.562484] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 21.562484] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] f7260370
> klog (20090903/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 21.562496] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.GFX0.DD02.GBQC] (Node f7017a68),
> -klog AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 21.562496] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
> +klog f7017a68), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 21.562544] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.GFX0.DD02._BQC] (Node f7017a50),
> -klog AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 21.562544] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
> +klog f7017a50), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 22.154348] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.ECDV.ECR1] (Node f74276a8), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 22.154348] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
> +klog f74276a8), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 22.154443] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECRB] (Node
> -klog f7427780), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 22.154443] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECRB] (Node f7427780), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 22.154516] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECG5] (Node
> -klog f7427828), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 22.154516] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECG5] (Node f7427828), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 22.154587] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.AC__._PSR] (Node f7427c18), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 22.154587] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.AC__._PSR] (Node f7427c18),
> +klog AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
> +klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
> klog message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines
> klog _DOD but not _DOS
> klog
> @@ -14366,174 +14268,161 @@ klog to display adapter) is defined but we should also have
> klog _DOS (Enable/Disable output switching) defined but it's
> klog been omitted. This can cause display switching issues.
> klog
> -klog FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
> -klog HIGH Kernel message: [ 25.859931] ACPI Error: Needed
> +klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
> +klog 1, HIGH Kernel message: [ 25.859931] ACPI Error: Needed
> klog [Buffer/String/Package], found [Integer] ffff880139af5240
> klog (20090903/exresop-590)
> klog
> klog ADVICE: An ACPI Method has returned an Integer type when a
> klog Buffer, String or Package was expected.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 25.859949] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.VGA_._DSM] (Node ffff88013ba4c0e0),
> -klog AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 25.859949] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node
> +klog ffff88013ba4c0e0), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 25.860025] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013ba4da80),
> -klog AE_AML_OPERAND_TYPE
> +klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
> +klog message: [ 25.860025] ACPI Error (psparse-0537): Method
> +klog parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
> +klog ffff88013ba4da80), AE_AML_OPERAND_TYPE
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIExceptionAETIMEReturnedByHandler:
> -klog Test 1, HIGH Kernel message: [ 26.653079] ACPI Exception:
> -klog AE_TIME, Returned by Handler for [EmbeddedControl]
> -klog (20100428/evregion-474)
> +klog FAILED [HIGH] KlogAcpiRegionHandlerError: Test 1, HIGH
> +klog Kernel message: [ 26.653079] ACPI Exception: AE_TIME,
> +klog Returned by Handler for [EmbeddedControl] (20100428
> +klog /evregion-474)
> klog
> -klog ADVICE: This is most probably caused by when a read or
> -klog write operation to the EC memory has failed because of a
> -klog timeout waiting for the Embedded Controller to complete
> -klog the transaction. Normally, the kernel waits for 500ms for
> -klog the Embedded Controller status port to indicate that a
> -klog transaction is complete, but in this case it has not and a
> -klog AE_TIME error has been returned.
> +klog ADVICE: The ACPI driver detected an error returned by a
> +klog region handler.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 26.653190] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880226c54ce0),
> -klog AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 26.653190] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
> +klog ffff880226c54ce0), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 26.653252] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECRB] (Node
> -klog ffff880226c54e00), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 26.653252] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECRB] (Node ffff880226c54e00), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 26.653283] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECG5] (Node
> -klog ffff880226c54ee0), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 26.653283] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECG5] (Node ffff880226c54ee0), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 26.653307] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.AC__._PSR] (Node ffff880226c56420), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 26.653307] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.AC__._PSR] (Node ffff880226c56420)
> +klog , AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
> -klog Kernel message: [ 26.874386] ACPI Warning: _BQC returned
> -klog an invalid level (20090903/video-631)
> +klog FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
> +klog HIGH Kernel message: [ 26.874386] ACPI Warning: _BQC
> +klog returned an invalid level (20090903/video-631)
> klog
> klog ADVICE: Method _BQC (Brightness Query Current) returned an
> klog invalid display brightness level.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 29.470614] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 29.470614] ACPI Warning for
> klog _SB_.PCI0.GFX0.DD03._BQC: Return type mismatch - found
> klog Reference, expected Integer (20100428/nspredef-1053)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 30.140339] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880217050ce0),
> -klog AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 30.140339] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
> +klog ffff880217050ce0), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 30.140421] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECRB] (Node
> -klog ffff880217050e00), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 30.140421] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECRB] (Node ffff880217050e00), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 30.140448] ACPI Error
> -klog (psparse-0537): Method parse/execution failed [ECG5] (Node
> -klog ffff880217050ee0), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 30.140448] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [ECG5] (Node ffff880217050ee0), AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 30.140475] ACPI Error
> -klog (psparse-0537): Method parse/execution failed
> -klog [_SB_.AC__._PSR] (Node ffff880217052420), AE_TIME
> +klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
> +klog : [ 30.140475] ACPI Error (psparse-0537): Method parse
> +klog /execution failed [_SB_.AC__._PSR] (Node ffff880217052420)
> +klog , AE_TIME
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
> -klog [ 42.490181] ACPI Error: [_SB_.VDRV] Namespace lookup
> -klog failure, AE_NOT_FOUND (20110112/psargs-359)
> +klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
> +klog message: [ 42.490181] ACPI Error: [_SB_.VDRV] Namespace
> +klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
> klog
> klog ADVICE: The kernel has most probably detected an error
> klog while executing ACPI AML. The error lists the ACPI driver
> klog module and the line number where the bug has been caught
> klog and the method that caused the error.
> klog
> -klog FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
> -klog HIGH Kernel message: [ 42.490202] ACPI Error: Method parse
> -klog /execution failed [_SB_.PCI0.LPC0.H_EC._Q51] (Node
> -klog ffff88003d9b1e60), AE_NOT_FOUND (20110112/psparse-536)
> +klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
> +klog message: [ 42.490202] ACPI Error: Method parse/execution
> +klog failed [_SB_.PCI0.LPC0.H_EC._Q51] (Node ffff88003d9b1e60),
> +klog AE_NOT_FOUND (20110112/psparse-536)
> klog
> klog ADVICE: This is a bug picked up by the kernel, but as yet,
> klog the firmware test suite has no diagnostic advice for this
> klog particular problem.
> klog
> -klog FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
> -klog HIGH Kernel message: [ 44.661543] ACPI Warning for
> +klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
> +klog Kernel message: [ 44.661543] ACPI Warning for
> klog _SB_.PCI0.GFX0.DD01._BCL: Return type mismatch - found
> klog Integer, expected Package (20090903/nspredef-1006)
> klog
> klog ADVICE: The ACPI Method returned an incorrect type, this
> klog should be fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 50.737630] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMI:
> -klog Excess arguments - needs 1, found 2 (20090903
> -klog /nspredef-303)
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 50.737630] ACPI Warning for
> +klog _SB_.PCI0.AGP_.VID_.MXMI: Excess arguments - needs 1,
> +klog found 2 (20090903/nspredef-303)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> klog
> -klog FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
> -klog : [ 50.737686] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMS:
> -klog Excess arguments - needs 1, found 2 (20090903
> -klog /nspredef-303)
> +klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog message: [ 50.737686] ACPI Warning for
> +klog _SB_.PCI0.AGP_.VID_.MXMS: Excess arguments - needs 1,
> +klog found 2 (20090903/nspredef-303)
> klog
> klog ADVICE: ACPI AML intepreter has found some non-conforming
> klog AML code. This should be investigated and fixed.
> diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log
> index a49a9f3..6fe05cd 100644
> --- a/klog-0001/klog-0002.log
> +++ b/klog-0001/klog-0002.log
> @@ -5,13 +5,12 @@ summary
> summary Test Failure Summary
> summary ==========================================================
> summary
> -summary Critical failures: 35
> +summary Critical failures: 34
> summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
> summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20100428/tbxfroot-219)
> summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20110112/tbxfroot-219)
> summary klog: CRITICAL Kernel message: [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 1408MB of RAM.
> summary klog: CRITICAL Kernel message: [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 4MB of RAM.
> -summary klog: CRITICAL Kernel message: [ 0.022719] ACPI Error: Found unknown opcode 0xFD at AML address f7ffe14c offset 0xE8, ignoring (20110112/psloop-141)
> summary klog: CRITICAL Kernel message: [ 0.025446] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x00BE (20110112/psloop-526)
> summary klog: CRITICAL Kernel message: [ 0.025463] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x00C3 (20110112/psloop-526)
> summary klog: CRITICAL Kernel message: [ 0.042222] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x2366 (20100121/psloop-526)
> @@ -42,7 +41,7 @@ summary klog: CRITICAL Kernel message: [ 2.949708] ACPI Error: Field [C
> summary klog: CRITICAL Kernel message: [ 2.949716] ACPI Error: Method parse/execution failed [_SB_._OSC] (Node ffff880297016ca8), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> summary klog: CRITICAL Kernel message: [ 13.445954] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597)
> summary
> -summary High failures: 1222
> +summary High failures: 1223
> summary klog: HIGH Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
> summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008018/0000000000008028, using 32 (20090903/tbfadt-427)
> summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008020/0000000000008028, using 32 (20090903/tbfadt-427)
> @@ -261,6 +260,7 @@ summary klog: HIGH Kernel message: [ 0.000000] ACPI Warning: Optional f
> summary klog: HIGH Kernel message: [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000820/0x0 (20100428/tbfadt-557)
> summary klog: HIGH Kernel message: [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000820/0x0 (20110112/tbfadt-557)
> summary klog: HIGH Kernel message: [ 0.000000] ACPI Warning (tbfadt-0460): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080926]
> +summary klog: HIGH Kernel message: [ 0.022719] ACPI Error: Found unknown opcode 0xFD at AML address f7ffe14c offset 0xE8, ignoring (20110112/psloop-141)
> summary klog: HIGH Kernel message: [ 0.034090] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node ee025630), AE_ALREADY_EXISTS (20110112/psparse-536)
> summary klog: HIGH Kernel message: [ 0.040119] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 400000)
> summary klog: HIGH Kernel message: [ 0.045570] ACPI Warning: For _SB_.PCI0.LPCB.H_EC._GLK: Parameter count mismatch - ASL declared 1, ACPI requires 0 (20110112/nspredef-352)
> --
> 1.8.0
>
Acked-by: Keng-Yu Lin <kengyu at canonical.com>
More information about the fwts-devel
mailing list