[PATCH][FWTS-TEST] klog-0001: Update test log because of changes in klog labels

Colin King colin.king at canonical.com
Thu Nov 29 11:45:42 UTC 2012


From: Colin Ian King <colin.king at canonical.com>

Because of the changes in the way the klog test now generates error
labels we have to update the test results here.

Signed-off-by: Colin Ian King <colin.king at canonical.com>
---
 klog-0001/klog-0001.log | 10417 +++++++++++++++++++++++-----------------------
 klog-0001/klog-0002.log |     6 +-
 2 files changed, 5156 insertions(+), 5267 deletions(-)

diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log
index 090de76..c4bf1ab 100644
--- a/klog-0001/klog-0001.log
+++ b/klog-0001/klog-0001.log
@@ -1,7 +1,7 @@
 klog            Scan kernel log for errors and warnings.
 klog            ----------------------------------------------------------
 klog            Test 1 of 1: Kernel log error check.
-klog            FAILED [HIGH] KlogACPIBIOSBugMultipleAPIC: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiMultipleApicMadtFound: Test 1, HIGH
 klog            Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC
 klog            /MADT found, using 0
 klog            
@@ -12,10 +12,10 @@ klog            the kernel will by default select the first one. However,
 klog            one can override this and select the Nth MADT using
 klog            acpi_apic_instance=N.
 klog            
-klog            FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Error: 32/64X address
-klog            mismatch in Gpe0Block: 00008018/0000000000008028, using 32
-klog            (20090903/tbfadt-427)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
+klog            HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
+klog            address mismatch in Gpe0Block: 00008018/0000000000008028,
+klog            using 32 (20090903/tbfadt-427)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between a 32
 klog            bit pointer and a 64 bit Generic Address pointer. Because
@@ -25,10 +25,10 @@ klog            then the kernel will opt for this in preference to the 64
 klog            bit pointer even though this is not in accordance to the
 klog            ACPI specification.
 klog            
-klog            FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Error: 32/64X address
-klog            mismatch in Gpe0Block: 00008020/0000000000008028, using 32
-klog            (20090903/tbfadt-427)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
+klog            HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
+klog            address mismatch in Gpe0Block: 00008020/0000000000008028,
+klog            using 32 (20090903/tbfadt-427)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between a 32
 klog            bit pointer and a 64 bit Generic Address pointer. Because
@@ -38,10 +38,10 @@ klog            then the kernel will opt for this in preference to the 64
 klog            bit pointer even though this is not in accordance to the
 klog            ACPI specification.
 klog            
-klog            FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Error: 32/64X address
-klog            mismatch in Gpe0Block: 0x00008020/0x0000000000008028,
-klog            using 32 (20110112/tbfadt-427)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
+klog            HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
+klog            address mismatch in Gpe0Block: 0x00008020
+klog            /0x0000000000008028, using 32 (20110112/tbfadt-427)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between a 32
 klog            bit pointer and a 64 bit Generic Address pointer. Because
@@ -51,10 +51,10 @@ klog            then the kernel will opt for this in preference to the 64
 klog            bit pointer even though this is not in accordance to the
 klog            ACPI specification.
 klog            
-klog            FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Error: 32/64X address
-klog            mismatch in Pm2ControlBlock: 00008030/0000000000008020,
-klog            using 32 (20090903/tbfadt-427)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
+klog            HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
+klog            address mismatch in Pm2ControlBlock: 00008030
+klog            /0000000000008020, using 32 (20090903/tbfadt-427)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between a 32
 klog            bit pointer and a 64 bit Generic Address pointer. Because
@@ -64,10 +64,10 @@ klog            then the kernel will opt for this in preference to the 64
 klog            bit pointer even though this is not in accordance to the
 klog            ACPI specification.
 klog            
-klog            FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Error: 32/64X address
-klog            mismatch in Pm2ControlBlock: 00008800/0000000000008100,
-klog            using 32 (20090903/tbfadt-427)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
+klog            HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
+klog            address mismatch in Pm2ControlBlock: 00008800
+klog            /0000000000008100, using 32 (20090903/tbfadt-427)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between a 32
 klog            bit pointer and a 64 bit Generic Address pointer. Because
@@ -77,10 +77,10 @@ klog            then the kernel will opt for this in preference to the 64
 klog            bit pointer even though this is not in accordance to the
 klog            ACPI specification.
 klog            
-klog            FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Error: 32/64X address
-klog            mismatch in Pm2ControlBlock: 0x00000900/0x0000000000000800
-klog            , using 32 (20110112/tbfadt-427)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
+klog            HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
+klog            address mismatch in Pm2ControlBlock: 0x00000900
+klog            /0x0000000000000800, using 32 (20110112/tbfadt-427)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between a 32
 klog            bit pointer and a 64 bit Generic Address pointer. Because
@@ -90,10 +90,10 @@ klog            then the kernel will opt for this in preference to the 64
 klog            bit pointer even though this is not in accordance to the
 klog            ACPI specification.
 klog            
-klog            FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Error: 32/64X address
-klog            mismatch in Pm2ControlBlock: 0x00001218/0x0000000000001214
-klog            , using 32 (20100428/tbfadt-427)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
+klog            HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
+klog            address mismatch in Pm2ControlBlock: 0x00001218
+klog            /0x0000000000001214, using 32 (20100428/tbfadt-427)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between a 32
 klog            bit pointer and a 64 bit Generic Address pointer. Because
@@ -103,10 +103,10 @@ klog            then the kernel will opt for this in preference to the 64
 klog            bit pointer even though this is not in accordance to the
 klog            ACPI specification.
 klog            
-klog            FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Error: 32/64X address
-klog            mismatch in Pm2ControlBlock: 0x00001218/0x0000000000001214
-klog            , using 32 (20110413/tbfadt-430)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
+klog            HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
+klog            address mismatch in Pm2ControlBlock: 0x00001218
+klog            /0x0000000000001214, using 32 (20110413/tbfadt-430)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between a 32
 klog            bit pointer and a 64 bit Generic Address pointer. Because
@@ -116,10 +116,10 @@ klog            then the kernel will opt for this in preference to the 64
 klog            bit pointer even though this is not in accordance to the
 klog            ACPI specification.
 klog            
-klog            FAILED [HIGH] KlogACPIError3264XAddress: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Error: 32/64X address
-klog            mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100
-klog            , using 32 (20110112/tbfadt-427)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
+klog            HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
+klog            address mismatch in Pm2ControlBlock: 0x00008800
+klog            /0x0000000000008100, using 32 (20110112/tbfadt-427)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between a 32
 klog            bit pointer and a 64 bit Generic Address pointer. Because
@@ -129,37 +129,39 @@ klog            then the kernel will opt for this in preference to the 64
 klog            bit pointer even though this is not in accordance to the
 klog            ACPI specification.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorAValidRSDP: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiValidRsdpNotFound: Test 1,
 klog            CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid
 klog            RSDP was not found (20090903/tbxfroot-219)
 klog            
-klog            ADVICE: An ACPI-compatible system must provide an RSDP
-klog            (Root System Description Pointer in the system’s low
-klog            address space. This structure’s only purpose is to
-klog            provide the physical address of the RSDT and XSDT.
+klog            ADVICE: An ACPI compatible system must provide an RSDP
+klog            (Root System Description Pointer). This structure provides
+klog            the physical address of the RSDT and XSDT. Since this
+klog            could not be found, the ACPI driver has had to disable
+klog            ACPI support.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorAValidRSDP: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiValidRsdpNotFound: Test 1,
 klog            CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid
 klog            RSDP was not found (20100428/tbxfroot-219)
 klog            
-klog            ADVICE: An ACPI-compatible system must provide an RSDP
-klog            (Root System Description Pointer in the system’s low
-klog            address space. This structure’s only purpose is to
-klog            provide the physical address of the RSDT and XSDT.
+klog            ADVICE: An ACPI compatible system must provide an RSDP
+klog            (Root System Description Pointer). This structure provides
+klog            the physical address of the RSDT and XSDT. Since this
+klog            could not be found, the ACPI driver has had to disable
+klog            ACPI support.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorAValidRSDP: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiValidRsdpNotFound: Test 1,
 klog            CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid
 klog            RSDP was not found (20110112/tbxfroot-219)
 klog            
-klog            ADVICE: An ACPI-compatible system must provide an RSDP
-klog            (Root System Description Pointer in the system’s low
-klog            address space. This structure’s only purpose is to
-klog            provide the physical address of the RSDT and XSDT.
+klog            ADVICE: An ACPI compatible system must provide an RSDP
+klog            (Root System Description Pointer). This structure provides
+klog            the physical address of the RSDT and XSDT. Since this
+klog            could not be found, the ACPI driver has had to disable
+klog            ACPI support.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
-klog            address mismatch in FADT - two FACS tables! 20090521
-klog            tbfadt-370
+klog            FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
+klog            : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
+klog            FADT - two FACS tables! 20090521 tbfadt-370
 klog            
 klog            ADVICE: The FADT table contains a mismatch between the 32
 klog            bit pointer (FIRMWARE_CTRL) and 64 bit pointer
@@ -175,10 +177,9 @@ klog            tables are present in your system, which is NOT complaint
 klog            with the ACPI specification. The kernel has to make a
 klog            choice and opts for the 32 bit FIRMWARE_CTRL.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
-klog            address mismatch in FADT - two FACS tables! (20090903
-klog            /tbfadt-369)
+klog            FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
+klog            : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
+klog            FADT - two FACS tables! (20090903/tbfadt-369)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between the 32
 klog            bit pointer (FIRMWARE_CTRL) and 64 bit pointer
@@ -194,10 +195,9 @@ klog            tables are present in your system, which is NOT complaint
 klog            with the ACPI specification. The kernel has to make a
 klog            choice and opts for the 32 bit FIRMWARE_CTRL.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
-klog            address mismatch in FADT - two FACS tables! (20100121
-klog            /tbfadt-369)
+klog            FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
+klog            : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
+klog            FADT - two FACS tables! (20100121/tbfadt-369)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between the 32
 klog            bit pointer (FIRMWARE_CTRL) and 64 bit pointer
@@ -213,10 +213,9 @@ klog            tables are present in your system, which is NOT complaint
 klog            with the ACPI specification. The kernel has to make a
 klog            choice and opts for the 32 bit FIRMWARE_CTRL.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
-klog            address mismatch in FADT - two FACS tables! (20100428
-klog            /tbfadt-369)
+klog            FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
+klog            : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
+klog            FADT - two FACS tables! (20100428/tbfadt-369)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between the 32
 klog            bit pointer (FIRMWARE_CTRL) and 64 bit pointer
@@ -232,10 +231,9 @@ klog            tables are present in your system, which is NOT complaint
 klog            with the ACPI specification. The kernel has to make a
 klog            choice and opts for the 32 bit FIRMWARE_CTRL.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
-klog            address mismatch in FADT - two FACS tables! (20100702
-klog            /tbfadt-369)
+klog            FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
+klog            : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
+klog            FADT - two FACS tables! (20100702/tbfadt-369)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between the 32
 klog            bit pointer (FIRMWARE_CTRL) and 64 bit pointer
@@ -251,10 +249,9 @@ klog            tables are present in your system, which is NOT complaint
 klog            with the ACPI specification. The kernel has to make a
 klog            choice and opts for the 32 bit FIRMWARE_CTRL.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
-klog            address mismatch in FADT - two FACS tables! (20101013
-klog            /tbfadt-369)
+klog            FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
+klog            : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
+klog            FADT - two FACS tables! (20101013/tbfadt-369)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between the 32
 klog            bit pointer (FIRMWARE_CTRL) and 64 bit pointer
@@ -270,10 +267,9 @@ klog            tables are present in your system, which is NOT complaint
 klog            with the ACPI specification. The kernel has to make a
 klog            choice and opts for the 32 bit FIRMWARE_CTRL.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
-klog            address mismatch in FADT - two FACS tables! (20110112
-klog            /tbfadt-369)
+klog            FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
+klog            : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
+klog            FADT - two FACS tables! (20110112/tbfadt-369)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between the 32
 klog            bit pointer (FIRMWARE_CTRL) and 64 bit pointer
@@ -289,10 +285,9 @@ klog            tables are present in your system, which is NOT complaint
 klog            with the ACPI specification. The kernel has to make a
 klog            choice and opts for the 32 bit FIRMWARE_CTRL.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
-klog            address mismatch in FADT - two FACS tables! (20110316
-klog            /tbfadt-369)
+klog            FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
+klog            : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
+klog            FADT - two FACS tables! (20110316/tbfadt-369)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between the 32
 klog            bit pointer (FIRMWARE_CTRL) and 64 bit pointer
@@ -308,10 +303,9 @@ klog            tables are present in your system, which is NOT complaint
 klog            with the ACPI specification. The kernel has to make a
 klog            choice and opts for the 32 bit FIRMWARE_CTRL.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrortwoFACS: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64 FACS
-klog            address mismatch in FADT - two FACS tables! (20110413
-klog            /tbfadt-369)
+klog            FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel message
+klog            : [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in
+klog            FADT - two FACS tables! (20110413/tbfadt-369)
 klog            
 klog            ADVICE: The FADT table contains a mismatch between the 32
 klog            bit pointer (FIRMWARE_CTRL) and 64 bit pointer
@@ -327,2002 +321,2008 @@ klog            tables are present in your system, which is NOT complaint
 klog            with the ACPI specification. The kernel has to make a
 klog            choice and opts for the 32 bit FIRMWARE_CTRL.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x3776BF40/0x000000003776ED40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x3776BF40
+klog            /0x000000003776ED40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x38FE4E40/0x0000000038FE4D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x38FE4E40
+klog            /0x0000000038FE4D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x38FE4E40/0x0000000038FE4D40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x38FE4E40
+klog            /0x0000000038FE4D40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x3F465F40/0x000000003F465F80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x3F465F40
+klog            /0x000000003F465F80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x3F473F40/0x000000003F473F80,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x3F473F40
+klog            /0x000000003F473F80, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x3F509F40/0x000000003F509F80,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x3F509F40
+klog            /0x000000003F509F80, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x3F509F40/0x000000003F509F80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x3F509F40
+klog            /0x000000003F509F80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x3F611E40/0x000000003F611D40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x3F611E40
+klog            /0x000000003F611D40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x3F611E40/0x000000003F611D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x3F611E40
+klog            /0x000000003F611D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x3F611E40/0x000000003F611D40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x3F611E40
+klog            /0x000000003F611D40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x6FB75F40/0x000000006FB75F80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x6FB75F40
+klog            /0x000000006FB75F80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x77603F40/0x0000000077603F80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x77603F40
+klog            /0x0000000077603F80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x77603F40/0x0000000077603F80,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x77603F40
+klog            /0x0000000077603F80, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x7762DF40/0x000000007762DF80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x7762DF40
+klog            /0x000000007762DF80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x77630F40/0x0000000077630F80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x77630F40
+klog            /0x0000000077630F80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x7776BF40/0x000000007776ED40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x7776BF40
+klog            /0x000000007776ED40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x7776BF40/0x000000007776ED40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x7776BF40
+klog            /0x000000007776ED40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x78FE4E40/0x0000000078FE4D40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x78FE4E40
+klog            /0x0000000078FE4D40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x7A7E4E40/0x000000007A7E4D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x7A7E4E40
+klog            /0x000000007A7E4D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x7BE20F40/0x000000007BE20F80,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x7BE20F40
+klog            /0x000000007BE20F80, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x7D7E4E40/0x000000007D7E4D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x7D7E4E40
+klog            /0x000000007D7E4D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x7D8C4F40/0x000000007D8C5E40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x7D8C4F40
+klog            /0x000000007D8C5E40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x7F611E40/0x000000007F611D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x7F611E40
+klog            /0x000000007F611D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x7FCEBF40/0x000000007FCE7F40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x7FCEBF40
+klog            /0x000000007FCE7F40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0x7FD5AF40/0x000000007FD5FF40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0x7FD5AF40
+klog            /0x000000007FD5FF40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xAAD87F40/0x00000000AADA1D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xAAD87F40
+klog            /0x00000000AADA1D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xAAD87F40/0x00000000AADA1D40,
-klog            using 32 (20110316/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xAAD87F40
+klog            /0x00000000AADA1D40, using 32 (20110316/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xAAD87F40/0x00000000AADA1D40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xAAD87F40
+klog            /0x00000000AADA1D40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xAADB7F40/0x00000000AADD1D40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xAADB7F40
+klog            /0x00000000AADD1D40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xAADB7F40/0x00000000AADD1D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xAADB7F40
+klog            /0x00000000AADD1D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xAADB9F40/0x00000000AADD3D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xAADB9F40
+klog            /0x00000000AADD3D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xAAF2AF40/0x00000000AAF2DD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xAAF2AF40
+klog            /0x00000000AAF2DD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xAAFE4E40/0x00000000AAFE4D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xAAFE4E40
+klog            /0x00000000AAFE4D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xAB62DF40/0x00000000AB62DF80,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xAB62DF40
+klog            /0x00000000AB62DF80, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xAB62DF40/0x00000000AB62DF80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xAB62DF40
+klog            /0x00000000AB62DF80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xAFB77F40/0x00000000AFB77F80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xAFB77F40
+klog            /0x00000000AFB77F80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xB5F17E40/0x00000000B5F17D40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xB5F17E40
+klog            /0x00000000B5F17D40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xB5F1BE40/0x00000000B5F1BD40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xB5F1BE40
+klog            /0x00000000B5F1BD40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xB6D5AF40/0x00000000B6D61D40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xB6D5AF40
+klog            /0x00000000B6D61D40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xB6DB9F40/0x00000000B6DD3D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xB6DB9F40
+klog            /0x00000000B6DD3D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xB762CF40/0x00000000B762CF80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xB762CF40
+klog            /0x00000000B762CF80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xB7B1CE40/0x00000000B7B1CD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xB7B1CE40
+klog            /0x00000000B7B1CD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xB7B1CE40/0x00000000B7B1CD40,
-klog            using 32 (20110316/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xB7B1CE40
+klog            /0x00000000B7B1CD40, using 32 (20110316/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xB7B1CE40/0x00000000B7B1CD40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xB7B1CE40
+klog            /0x00000000B7B1CD40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xB8FE4E40/0x00000000B8FE4D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xB8FE4E40
+klog            /0x00000000B8FE4D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBAD17F40/0x00000000BAD31D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBAD17F40
+klog            /0x00000000BAD31D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBAD87F40/0x00000000BADA1D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBAD87F40
+klog            /0x00000000BADA1D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBADABF40/0x00000000BADAED40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBADABF40
+klog            /0x00000000BADAED40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBADABF40/0x00000000BADAED40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBADABF40
+klog            /0x00000000BADAED40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBAF1CF40/0x00000000BAF1FD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBAF1CF40
+klog            /0x00000000BAF1FD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBAFE4E40/0x00000000BAFE4D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBAFE4E40
+klog            /0x00000000BAFE4D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBAFE5E40/0x00000000BAFE5D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBAFE5E40
+klog            /0x00000000BAFE5D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBB4D1F40/0x00000000BB4DFD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBB4D1F40
+klog            /0x00000000BB4DFD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBB583F40/0x00000000BB59DD40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBB583F40
+klog            /0x00000000BB59DD40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBB583F40/0x00000000BB59DD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBB583F40
+klog            /0x00000000BB59DD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBB5B3F40/0x00000000BB5CDD40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBB5B3F40
+klog            /0x00000000BB5CDD40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBB5B3F40/0x00000000BB5CDD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBB5B3F40
+klog            /0x00000000BB5CDD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBB5B3F40/0x00000000BB5CDD40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBB5B3F40
+klog            /0x00000000BB5CDD40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBB62CF40/0x00000000BB62CF80,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBB62CF40
+klog            /0x00000000BB62CF80, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBB62DF40/0x00000000BB62DF80,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBB62DF40
+klog            /0x00000000BB62DF80, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBB648F40/0x00000000BB64BD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBB648F40
+klog            /0x00000000BB64BD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBB649F40/0x00000000BB64CD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBB649F40
+klog            /0x00000000BB64CD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBB76BF40/0x00000000BB76ED40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBB76BF40
+klog            /0x00000000BB76ED40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBBE27F40/0x00000000BBE27F80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBBE27F40
+klog            /0x00000000BBE27F80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBBE27F40/0x00000000BBE27F80,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBBE27F40
+klog            /0x00000000BBE27F80, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBBE29F40/0x00000000BBE29F80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBBE29F40
+klog            /0x00000000BBE29F80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBDB65F40/0x00000000BDB6BE40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBDB65F40
+klog            /0x00000000BDB6BE40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBDF17E40/0x00000000BDF17D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBDF17E40
+klog            /0x00000000BDF17D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBDF18E40/0x00000000BDF18D40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBDF18E40
+klog            /0x00000000BDF18D40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBDF19E40
+klog            /0x00000000BDF19D40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40,
-klog            using 32 (20101013/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBDF19E40
+klog            /0x00000000BDF19D40, using 32 (20101013/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBDF19E40
+klog            /0x00000000BDF19D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBDF1AE40/0x00000000BDF1AD40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBDF1AE40
+klog            /0x00000000BDF1AD40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBE97CF40/0x00000000BE996D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBE97CF40
+klog            /0x00000000BE996D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBEDB7F40/0x00000000BEDD1D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBEDB7F40
+klog            /0x00000000BEDD1D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBEDB8F40/0x00000000BEDD1D40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBEDB8F40
+klog            /0x00000000BEDD1D40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBEDB8F40/0x00000000BEDD1D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBEDB8F40
+klog            /0x00000000BEDD1D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBEDB9F40/0x00000000BEDD3D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBEDB9F40
+klog            /0x00000000BEDD3D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBF4D1F40/0x00000000BF4DFD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBF4D1F40
+klog            /0x00000000BF4DFD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBF62CF40/0x00000000BF62CF80,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBF62CF40
+klog            /0x00000000BF62CF80, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBF62DF40/0x00000000BF62DF80,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBF62DF40
+klog            /0x00000000BF62DF80, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBF654F40/0x00000000BF662D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBF654F40
+klog            /0x00000000BF662D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBF7E4E40/0x00000000BF7E4D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBF7E4E40
+klog            /0x00000000BF7E4D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBFA4CF40/0x00000000BFA51F40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBFA4CF40
+klog            /0x00000000BFA51F40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBFA4CF40/0x00000000BFA51F40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBFA4CF40
+klog            /0x00000000BFA51F40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBFE17E40/0x00000000BFE17D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBFE17E40
+klog            /0x00000000BFE17D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xBFE21F40/0x00000000BFE21E40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xBFE21F40
+klog            /0x00000000BFE21E40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xC9E58F40/0x00000000C9E6ED40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xC9E58F40
+klog            /0x00000000C9E6ED40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCAB39F40/0x00000000CAB3CD40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCAB39F40
+klog            /0x00000000CAB3CD40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCAFE4E40
+klog            /0x00000000CAFE4D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCAFE4E40
+klog            /0x00000000CAFE4D40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCAFE5E40/0x00000000CAFE5D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCAFE5E40
+klog            /0x00000000CAFE5D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCB61DF40/0x00000000CB61DE40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCB61DF40
+klog            /0x00000000CB61DE40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCB61DF40/0x00000000CB61DE40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCB61DF40
+klog            /0x00000000CB61DE40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCBE4CF40/0x00000000CBE51F40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCBE4CF40
+klog            /0x00000000CBE51F40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCBE4CF40/0x00000000CBE51F40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCBE4CF40
+klog            /0x00000000CBE51F40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCBF6BF40/0x00000000CBF6ED40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCBF6BF40
+klog            /0x00000000CBF6ED40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCEF27F40/0x00000000CEF2AD40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCEF27F40
+klog            /0x00000000CEF2AD40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCEF27F40/0x00000000CEF2AD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCEF27F40
+klog            /0x00000000CEF2AD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCEF27F40/0x00000000CEF2AD40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCEF27F40
+klog            /0x00000000CEF2AD40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCEF28F40/0x00000000CEF2BD40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCEF28F40
+klog            /0x00000000CEF2BD40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCEF28F40/0x00000000CEF2BD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCEF28F40
+klog            /0x00000000CEF2BD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCEF2BF40/0x00000000CEF2ED40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCEF2BF40
+klog            /0x00000000CEF2ED40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCEF2BF40/0x00000000CEF2ED40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCEF2BF40
+klog            /0x00000000CEF2ED40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCF36BF40/0x00000000CF36ED40,
-klog            using 32 (20100702/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCF36BF40
+klog            /0x00000000CF36ED40, using 32 (20100702/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCF36BF40/0x00000000CF36ED40,
-klog            using 32 (20101013/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCF36BF40
+klog            /0x00000000CF36ED40, using 32 (20101013/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCF76BF40/0x00000000CF76ED40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCF76BF40
+klog            /0x00000000CF76ED40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCF76BF40/0x00000000CF76ED40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCF76BF40
+klog            /0x00000000CF76ED40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCF7E4E40
+klog            /0x00000000CF7E4D40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCF7E4E40
+klog            /0x00000000CF7E4D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCF7E4E40
+klog            /0x00000000CF7E4D40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCFBFAF40/0x00000000CFBF6F40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCFBFAF40
+klog            /0x00000000CFBF6F40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCFD56F40/0x00000000CFD52F40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCFD56F40
+klog            /0x00000000CFD52F40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xCFD5FF40/0x00000000CFD65E40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xCFD5FF40
+klog            /0x00000000CFD65E40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xD2F2DF40/0x00000000D2F30D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xD2F2DF40
+klog            /0x00000000D2F30D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xDB36BF40/0x00000000DB36ED40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xDB36BF40
+klog            /0x00000000DB36ED40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xDB36BF40/0x00000000DB36ED40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xDB36BF40
+klog            /0x00000000DB36ED40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40,
-klog            using 32 (20100428/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xDB76BF40
+klog            /0x00000000DB76ED40, using 32 (20100428/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xDB76BF40
+klog            /0x00000000DB76ED40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xDB76BF40
+klog            /0x00000000DB76ED40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xDEB39F40/0x00000000DEB3CD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xDEB39F40
+klog            /0x00000000DEB3CD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xDEB3AF40/0x00000000DEB3DD40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xDEB3AF40
+klog            /0x00000000DEB3DD40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xDEEBAF40/0x00000000DEEBDD40,
-klog            using 32 (20110413/tbfadt-489)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xDEEBAF40
+klog            /0x00000000DEEBDD40, using 32 (20110413/tbfadt-489)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xDEF2DF40/0x00000000DEF30D40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xDEF2DF40
+klog            /0x00000000DEF30D40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 0xDF64BF40/0x00000000DF64ED40,
-klog            using 32 (20110112/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 0xDF64BF40
+klog            /0x00000000DF64ED40, using 32 (20110112/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 3762DF40/000000003762DF80,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 3762DF40
+klog            /000000003762DF80, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 3F611E40/000000003F611D40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 3F611E40
+klog            /000000003F611D40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 7776BF40/000000007776ED40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 7776BF40
+klog            /000000007776ED40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 7DB61F40/000000007DB66F40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 7DB61F40
+klog            /000000007DB66F40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 7F3ECF40/000000007F3E8F40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 7F3ECF40
+klog            /000000007F3E8F40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 7F611E40/000000007F611D40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 7F611E40
+klog            /000000007F611D40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - 9DCC4F40/000000009DCC5E40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - 9DCC4F40
+klog            /000000009DCC5E40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - AFB75F40/00000000AFB75F80,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - AFB75F40
+klog            /00000000AFB75F80, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - B7B1CE40/00000000B7B1CD40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - B7B1CE40
+klog            /00000000B7B1CD40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - B7B1CE40/00000000B7B1CD40,
-klog            using 32 (20100121/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - B7B1CE40
+klog            /00000000B7B1CD40, using 32 (20100121/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - BADABF40/00000000BADAED40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - BADABF40
+klog            /00000000BADAED40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - BAF2DF40/00000000BAF30D40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - BAF2DF40
+klog            /00000000BAF30D40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - BB62DF40/00000000BB62DF80,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - BB62DF40
+klog            /00000000BB62DF80, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - BB76BF40/00000000BB76ED40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - BB76BF40
+klog            /00000000BB76ED40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - BBE28E40/00000000BBE28D40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - BBE28E40
+klog            /00000000BBE28D40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - BDB5BF40/00000000BDB60F40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - BDB5BF40
+klog            /00000000BDB60F40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - BDB5FF40/00000000BDB64F40,
-klog            using 32 20090521 tbfadt-487
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - BDB5FF40
+klog            /00000000BDB64F40, using 32 20090521 tbfadt-487
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - BDF17E40/00000000BDF17D40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - BDF17E40
+klog            /00000000BDF17D40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - BEDB7F40/00000000BEDD1D40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - BEDB7F40
+klog            /00000000BEDD1D40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - BF62CF40/00000000BF62CF80,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - BF62CF40
+klog            /00000000BF62CF80, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - BF76BF40/00000000BF76ED40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - BF76BF40
+klog            /00000000BF76ED40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - CBE4AF40/00000000CBE4FF40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - CBE4AF40
+klog            /00000000CBE4FF40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - CBF6BF40/00000000CBF6ED40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - CBF6BF40
+klog            /00000000CBF6ED40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - CEF28F40/00000000CEF2BD40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - CEF28F40
+klog            /00000000CEF2BD40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - CEF2CF40/00000000CEF2FD40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - CEF2CF40
+klog            /00000000CEF2FD40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - D2F2DF40/00000000D2F30D40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - D2F2DF40
+klog            /00000000D2F30D40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - DADC1F40/00000000DADD5D40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - DADC1F40
+klog            /00000000DADD5D40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - DB36BF40/00000000DB36ED40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - DB36BF40
+klog            /00000000DB36ED40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - DB76BF40/00000000DB76ED40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - DB76BF40
+klog            /00000000DB76ED40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - DEEBAF40/00000000DEEBDD40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - DEEBAF40
+klog            /00000000DEEBDD40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X FACS
-klog            address mismatch in FADT - DEF2DF40/00000000DEF30D40,
-klog            using 32 (20090903/tbfadt-486)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X FACS address mismatch in FADT - DEF2DF40
+klog            /00000000DEF30D40, using 32 (20090903/tbfadt-486)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X length
-klog            mismatch in Gpe1Block: 0/32 20090521 tbfadt-527
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X length mismatch in Gpe1Block: 0/32 20090521
+klog            tbfadt-527
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X length
-klog            mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X length mismatch in Gpe1Block: 0/32 (20090903
+klog            /tbfadt-526)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X length
-klog            mismatch in Gpe1Block: 0/32 (20100428/tbfadt-526)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X length mismatch in Gpe1Block: 0/32 (20100428
+klog            /tbfadt-526)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X length
-klog            mismatch in Gpe1Block: 0/32 (20101013/tbfadt-526)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X length mismatch in Gpe1Block: 0/32 (20101013
+klog            /tbfadt-526)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X length
-klog            mismatch in Gpe1Block: 0/32 (20110112/tbfadt-526)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X length mismatch in Gpe1Block: 0/32 (20110112
+klog            /tbfadt-526)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningError3264length: Test 1, HIGH
-klog            Kernel message: [ 0.000000] ACPI Warning: 32/64X length
-klog            mismatch in Gpe1Block: 0/32 (20110413/tbfadt-529)
+klog            FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
+klog            /64X length mismatch in Gpe1Block: 0/32 (20110413
+klog            /tbfadt-529)
 klog            
 klog            ADVICE: The FADT table contains Generic Address Structure
 klog            that has a mismatch between the 32 bit and 64 bit versions
 klog            of an address. This should be fixed so there are no
 klog            mismatches. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 0.000000] ACPI Warning: BIOS XSDT has NULL entry,
-klog            using RSDT (20110112/tbutils-663)
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 0.000000] ACPI Warning: BIOS XSDT has NULL
+klog            entry, using RSDT (20110112/tbutils-663)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
-klog            Incorrect checksum in table [APIC] - 0x3E, should be 0x41
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
+klog            checksum in table [APIC] - 0x3E, should be 0x41 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
-klog            Incorrect checksum in table [APIC] - 0x65, should be 0x68
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
+klog            checksum in table [APIC] - 0x65, should be 0x68 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
-klog            Incorrect checksum in table [APIC] - 0x69, should be 0x6C
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
+klog            checksum in table [APIC] - 0x69, should be 0x6C (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
-klog            Incorrect checksum in table [APIC] - 0x69, should be 0x6C
-klog            (20110413/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
+klog            checksum in table [APIC] - 0x69, should be 0x6C (20110413
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
-klog            Incorrect checksum in table [APIC] - 0x9E, should be 0xA1
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
+klog            checksum in table [APIC] - 0x9E, should be 0xA1 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
-klog            Incorrect checksum in table [APIC] - 0xDF, should be 0xE2
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
+klog            checksum in table [APIC] - 0xDF, should be 0xE2 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
-klog            Incorrect checksum in table [APIC] - 0xE4, should be 0xE7
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
+klog            checksum in table [APIC] - 0xE4, should be 0xE7 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.000000] ACPI Warning:
-klog            Incorrect checksum in table [XSDT] - 0x89, should be 0x7D
-klog            (20110413/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect
+klog            checksum in table [XSDT] - 0x89, should be 0x7D (20110413
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm1aControlBlock: 32, using default 16
-klog            (20090903/tbfadt-607)
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm1aControlBlock: 32, using default 16 (20090903
+klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm1aControlBlock: 32, using default 16
-klog            (20100428/tbfadt-607)
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm1aControlBlock: 32, using default 16 (20100428
+klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm1aControlBlock: 32, using default 16
-klog            (20110112/tbfadt-607)
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm1aControlBlock: 32, using default 16 (20110112
+klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm1aControlBlock: 32, using default 16
-klog            (20110413/tbfadt-610)
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm1aControlBlock: 32, using default 16 (20110413
+klog            /tbfadt-610)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm1bControlBlock: 32, using default 16
-klog            (20090903/tbfadt-607)
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm1bControlBlock: 32, using default 16 (20090903
+klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm2ControlBlock: 0, using default 8 (20090903
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm2ControlBlock: 0, using default 8 (20090903
 klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm2ControlBlock: 0, using default 8 (20100428
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm2ControlBlock: 0, using default 8 (20100428
 klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm2ControlBlock: 0, using default 8 (20110112
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm2ControlBlock: 0, using default 8 (20110112
 klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm2ControlBlock: 16, using default 8 (20100428
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm2ControlBlock: 16, using default 8 (20100428
 klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm2ControlBlock: 16, using default 8 (20110112
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm2ControlBlock: 16, using default 8 (20110112
 klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm2ControlBlock: 16, using default 8 (20110413
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm2ControlBlock: 16, using default 8 (20110413
 klog            /tbfadt-610)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm2ControlBlock: 32, using default 8 (20090903
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm2ControlBlock: 32, using default 8 (20090903
 klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for Pm2ControlBlock: 32, using default 8 (20110112
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for Pm2ControlBlock: 32, using default 8 (20110112
 klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidLengthForfadt: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Invalid
-klog            length for PmTimerBlock: 24, using default 32 (20100428
+klog            FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
+klog            Kernel message: [ 0.000000] ACPI Warning: Invalid length
+klog            for PmTimerBlock: 24, using default 32 (20100428
 klog            /tbfadt-607)
 klog            
 klog            ADVICE: This item in the FADT is the incorrect length.
 klog            Should be corrected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Gpe1Block has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Gpe1Block has zero address or length:
 klog            000000000000102C/0 20090521 tbfadt-558
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Gpe1Block has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Gpe1Block has zero address or length:
 klog            000000000000102C/0 (20090903/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Gpe1Block has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Gpe1Block has zero address or length:
 klog            000000000000802C/0 (20090903/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Gpe1Block has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Gpe1Block has zero address or length:
 klog            0x0000000000000000/0x4 (20110413/tbfadt-560)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Gpe1Block has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Gpe1Block has zero address or length:
 klog            0x000000000000102C/0x0 (20100428/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Gpe1Block has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Gpe1Block has zero address or length:
 klog            0x000000000000102C/0x0 (20101013/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Gpe1Block has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Gpe1Block has zero address or length:
 klog            0x000000000000102C/0x0 (20110112/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Gpe1Block has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Gpe1Block has zero address or length:
 klog            0x000000000000102C/0x0 (20110413/tbfadt-560)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Gpe1Block has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Gpe1Block has zero address or length:
 klog            0x00000000000044A0/0x0 (20100428/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0000000000000000/1 20090521 tbfadt-558
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0000000000000000/1 (20090903/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0000000000000050/0 (20090903/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0x0000000000000000/0x1 (20100428/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0x0000000000000000/0x1 (20101013/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0x0000000000000000/0x1 (20110112/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0x0000000000000000/0x1 (20110413/tbfadt-560)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0x0000000000000450/0x0 (20100428/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0x0000000000000450/0x0 (20110112/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0x0000000000000814/0x0 (20100428/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0x0000000000000820/0x0 (20100428/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning: Optional
-klog            field Pm2ControlBlock has zero address or length:
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
+klog            Optional field Pm2ControlBlock has zero address or length:
 klog            0x0000000000000820/0x0 (20110112/tbfadt-557)
 klog            
 klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [HIGH] KlogACPIWarningOptionalFieldhasZero: Test 1,
-klog            HIGH Kernel message: [ 0.000000] ACPI Warning
+klog            FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
+klog            Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning
 klog            (tbfadt-0460): Optional field "Gpe1Block" has zero address
 klog            or length: 000000000000102C/0 [20080926]
 klog            
@@ -2330,16 +2330,16 @@ klog            ADVICE: An ACPI table contains Generic Address Structure
 klog            that has an address that is incorrectly set to zero, or a
 klog            zero length. This needs to be fixed. 
 klog            
-klog            FAILED [MEDIUM] KlogMtrryourBIOSHasConfigured: Test 1,
-klog            MEDIUM Kernel message: [ 0.000000] mtrr: your BIOS has
-klog            configured an incorrect mask, fixing it.
+klog            FAILED [MEDIUM] KlogBiosMtrrIncorrectMask: Test 1, MEDIUM
+klog            Kernel message: [ 0.000000] mtrr: your BIOS has configured
+klog            an incorrect mask, fixing it.
 klog            
 klog            ADVICE: The Memory Type Range Registers (MTRRs) which
 klog            define memory caching policy are misconfigued by the BIOS.
 klog            In this case, the mask is incorrectly set and the kernel
 klog            has detected this and worked around the firmware bug.
 klog            
-klog            FAILED [CRITICAL] KlogWARNINGBIOSBugCPUMTRRsDont: Test 1,
+klog            FAILED [CRITICAL] KlogBiosCpuMtrrMisconfigured: Test 1,
 klog            CRITICAL Kernel message: [ 0.000000] WARNING: BIOS bug:
 klog            CPU MTRRs don't cover all of memory, losing 1408MB of RAM.
 klog            
@@ -2351,7 +2351,7 @@ klog            memory available to be safe. Either check that the BIOS
 klog            memory caching options are set correctly or contact your
 klog            BIOS vendor to get this fixed.
 klog            
-klog            FAILED [CRITICAL] KlogWARNINGBIOSBugCPUMTRRsDont: Test 1,
+klog            FAILED [CRITICAL] KlogBiosCpuMtrrMisconfigured: Test 1,
 klog            CRITICAL Kernel message: [ 0.000000] WARNING: BIOS bug:
 klog            CPU MTRRs don't cover all of memory, losing 4MB of RAM.
 klog            
@@ -2363,19 +2363,20 @@ klog            memory available to be safe. Either check that the BIOS
 klog            memory caching options are set correctly or contact your
 klog            BIOS vendor to get this fixed.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFoundUnknownOpcode: Test 1,
-klog            CRITICAL Kernel message: [ 0.022719] ACPI Error: Found
-klog            unknown opcode 0xFD at AML address f7ffe14c offset 0xE8,
-klog            ignoring (20110112/psloop-141)
+klog            FAILED [HIGH] KlogAcpiUnknownAmlOpcode: Test 1, HIGH
+klog            Kernel message: [ 0.022719] ACPI Error: Found unknown
+klog            opcode 0xFD at AML address f7ffe14c offset 0xE8, ignoring
+klog            (20110112/psloop-141)
 klog            
-klog            ADVICE: An illegal AML opcode has been found and is
-klog            ignored. This indicates either badly compiled code or
-klog            opcode corruption in the DSDT or SSDT tables or a bug in
-klog            the ACPI execution engine. Recommend disassembing using
-klog            iasl to find any offending code.
+klog            ADVICE: ACPI execution run time error: The ACPI
+klog            interpreter has reached an opcode that is unknown, this
+klog            normally is a bug in the underlying AML code either
+klog            because of badly written AML code or the compiler has
+klog            produced code that is incorrect or the ACPI interpreter
+klog            does not support this valid opcode. 
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.025446] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.025446] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x007B] at table offset 0x00BE (20110112/psloop-526)
 klog            
@@ -2385,8 +2386,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.025463] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.025463] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x007B] at table offset 0x00C3 (20110112/psloop-526)
 klog            
@@ -2396,8 +2397,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.034090] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.034090] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node ee025630),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -2405,15 +2406,15 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogFirmwareBug: Test 1, HIGH Kernel message
-klog            : [ 0.040119] [Firmware Bug]: the BIOS has corrupted
-klog            hw-PMU resources (MSR 186 is 400000)
+klog            FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
+klog            message: [ 0.040119] [Firmware Bug]: the BIOS has
+klog            corrupted hw-PMU resources (MSR 186 is 400000)
 klog            
 klog            ADVICE: The kernel has detected a Firmware bug in the BIOS
 klog            or ACPI which needs investigating and fixing.
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.042222] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.042222] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x0070] at table offset 0x2366 (20100121/psloop-526)
 klog            
@@ -2423,8 +2424,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.042240] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.042240] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x0070] at table offset 0x006C (20090903/psloop-522)
 klog            
@@ -2434,8 +2435,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.042253] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.042253] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x0070] at table offset 0x006F (20090903/psloop-522)
 klog            
@@ -2445,8 +2446,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.042265] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.042265] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x0070] at table offset 0x0070 (20090903/psloop-522)
 klog            
@@ -2456,8 +2457,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.042279] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.042279] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x0070] at table offset 0x0077 (20090903/psloop-522)
 klog            
@@ -2467,8 +2468,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.042291] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.042291] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x0070] at table offset 0x007C (20090903/psloop-522)
 klog            
@@ -2478,8 +2479,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.042302] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.042302] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x007B] at table offset 0x007D (20090903/psloop-522)
 klog            
@@ -2489,8 +2490,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.042311] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.042311] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x007B] at table offset 0x007F (20090903/psloop-522)
 klog            
@@ -2500,8 +2501,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.042322] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.042322] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x007B] at table offset 0x0080 (20090903/psloop-522)
 klog            
@@ -2511,8 +2512,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [CRITICAL] KlogACPIWarningDetectedAnUnsupported:
-klog            Test 1, CRITICAL Kernel message: [ 0.044066] ACPI Warning:
+klog            FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
+klog            1, CRITICAL Kernel message: [ 0.044066] ACPI Warning:
 klog            Detected an unsupported executable opcode at module-level:
 klog            [0x0070] at table offset 0x678F (20100428/psloop-526)
 klog            
@@ -2522,8 +2523,8 @@ klog            opcode corruption in the DSDT or SSDT tables or a bug in
 klog            the ACPI execution engine. Recommend disassembing using
 klog            iasl to find any offending code.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningParameterCountMismatch: Test
-klog            1, HIGH Kernel message: [ 0.045570] ACPI Warning: For
+klog            FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
+klog            HIGH Kernel message: [ 0.045570] ACPI Warning: For
 klog            _SB_.PCI0.LPCB.H_EC._GLK: Parameter count mismatch - ASL
 klog            declared 1, ACPI requires 0 (20110112/nspredef-352)
 klog            
@@ -2531,33 +2532,34 @@ klog            ADVICE: The ACPI Method was executing with a different
 klog            number of parameters than the Method expected. This should
 klog            be fixed.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.050847] ACPI Warning:
-klog            Package List length (0x10) larger than NumElements count
-klog            (0x8), truncated
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.050847] ACPI Warning: Package
+klog            List length (0x10) larger than NumElements count (0x8),
+klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.053909] ACPI Warning:
-klog            Package List length (0x10) larger than NumElements count
-klog            (0x6), truncated
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.053909] ACPI Warning: Package
+klog            List length (0x10) larger than NumElements count (0x6),
+klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.074070] ACPI Error: The DSDT has been corrupted or
-klog            replaced - old, new headers below (20110413/tbutils-372)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.074070] ACPI Error: The DSDT has been
+klog            corrupted or replaced - old, new headers below (20110413
+klog            /tbutils-372)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.074090] ACPI Error: Please send DMI info to
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.074090] ACPI Error: Please send DMI info to
 klog            linux-acpi at vger.kernel.org
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -2565,89 +2567,89 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.076767] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xA6, should be 0x97
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.076767] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xA6, should be 0x97 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.077157] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x4C, should be 0x21
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.077157] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x4C, should be 0x21 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.077854] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0._OSC] (Node f4c250d8),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.077854] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0._OSC] (Node f4c250d8), AE_NOT_FOUND
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.078226] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_PR_.CPU1.APCT] (Node f7033090),
-klog            AE_NO_MEMORY
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.078226] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1.APCT] (Node
+klog            f7033090), AE_NO_MEMORY
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.078254] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_PR_.CPU1.GCAP] (Node f7033078),
-klog            AE_NO_MEMORY
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.078254] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1.GCAP] (Node
+klog            f7033078), AE_NO_MEMORY
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.078268] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 07, should be 06
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.078268] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 07, should be 06 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.078278] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_PR_.CPU1._PDC] (Node f7033048),
-klog            AE_NO_MEMORY
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.078278] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._PDC] (Node
+klog            f7033048), AE_NO_MEMORY
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.078686] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x38, should be 0x81
-klog            (20110413/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.078686] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x38, should be 0x81 (20110413
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.083817] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xF9, should be 0xF3
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.083817] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xF9, should be 0xF3 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.085590] ACPI Error: Could not map memory at
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.085590] ACPI Error: Could not map memory at
 klog            0x000000007F5E3520, size 463 (20110112/exregion-178)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -2655,26 +2657,26 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.085606] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU1.APPT] (Node f403d228), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.085606] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU1.APPT] (Node f403d228),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.085618] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU1.GCAP] (Node f403d1f8), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.085618] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU1.GCAP] (Node f403d1f8),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.085627] ACPI Error: Could not map memory at
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.085627] ACPI Error: Could not map memory at
 klog            0x000000007D3E1520, size 463 (20110112/exregion-178)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -2682,35 +2684,35 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.085628] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU1._PDC] (Node f403d1c8), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.085628] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU1._PDC] (Node f403d1c8),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.085974] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x6B, should be 0x39
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.085974] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x6B, should be 0x39 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.086054] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0x96
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.086054] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0x96 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.086081] ACPI Error: Could not map memory at
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.086081] ACPI Error: Could not map memory at
 klog            0x000000007F395420, size 141 (20110112/exregion-178)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -2718,35 +2720,35 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.086097] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU1.APCT] (Node f403d210), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.086097] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU1.APCT] (Node f403d210),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.086108] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU2.GCAP] (Node f403d270), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.086108] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU2.GCAP] (Node f403d270),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.086118] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU2._PDC] (Node f403d240), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.086118] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU2._PDC] (Node f403d240),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.086119] ACPI Error: Could not map memory at
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.086119] ACPI Error: Could not map memory at
 klog            0x000000007D198120, size 141 (20110112/exregion-178)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -2754,146 +2756,145 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.088999] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xE8, should be 0xDB
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.088999] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xE8, should be 0xDB (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.089613] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xB3, should be 0xAE
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.089613] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xB3, should be 0xAE (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.089701] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x77, should be 0x6C
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.089701] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x77, should be 0x6C (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.091402] ACPI Warning:
-klog            Package List length (0x7) larger than NumElements count
-klog            (0x3), truncated
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.091402] ACPI Warning: Package
+klog            List length (0x7) larger than NumElements count (0x3),
+klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.091463] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1.APPT] (Node
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 0.091463] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1.APPT] (Node
 klog            f701e228), AE_INVALID_TABLE_LENGTH
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.091510] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1.GCAP] (Node
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 0.091510] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1.GCAP] (Node
 klog            f701e1f8), AE_INVALID_TABLE_LENGTH
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.091541] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - F6, should be E7
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.091541] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - F6, should be E7 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.091552] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 0.091552] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._PDC] (Node
 klog            f701e1c8), AE_INVALID_TABLE_LENGTH
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.091778] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 8E, should be 7F
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.091778] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 8E, should be 7F (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.091911] ACPI Warning:
-klog            Incorrect checksum in table [APIC] - 0x8E, should be 0x91
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.091911] ACPI Warning: Incorrect
+klog            checksum in table [APIC] - 0x8E, should be 0x91 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.092524] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_PR_.CPU1.APCT] (Node f701e210),
-klog            AE_NO_MEMORY
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.092524] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1.APCT] (Node
+klog            f701e210), AE_NO_MEMORY
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.092570] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_PR_.CPU2.GCAP] (Node f701e270),
-klog            AE_NO_MEMORY
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.092570] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU2.GCAP] (Node
+klog            f701e270), AE_NO_MEMORY
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.092612] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_PR_.CPU2._PDC] (Node f701e240),
-klog            AE_NO_MEMORY
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.092612] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU2._PDC] (Node
+klog            f701e240), AE_NO_MEMORY
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
-klog            HIGH Kernel message: [ 0.093544] ACPI Error: Needed type
-klog            [Reference], found [Device] f7019f90 (20100428
-klog            /exresop-104)
+klog            FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
+klog            message: [ 0.093544] ACPI Error: Needed type [Reference],
+klog            found [Device] f7019f90 (20100428/exresop-104)
 klog            
 klog            ADVICE: An ACPI Method has returned an Device type when a
 klog            Reference type was expected.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.094477] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x97, should be 0x90
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.094477] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x97, should be 0x90 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogFirmwareBugACPINoBQC: Test 1, HIGH
-klog            Kernel message: [ 0.094856] [Firmware Bug]: ACPI: No _BQC
-klog            method, cannot determine initial brightness
+klog            FAILED [HIGH] KlogAcpiMissingBqc: Test 1, HIGH Kernel
+klog            message: [ 0.094856] [Firmware Bug]: ACPI: No _BQC method,
+klog            cannot determine initial brightness
 klog            
 klog            ADVICE: _BQC (Brightness Query Current level) seems to be
 klog            missing. This method returns the current brightness level
 klog            of a built-in display output device.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.095719] ACPI Error: Could not map memory at
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.095719] ACPI Error: Could not map memory at
 klog            0x0000000087127520, size 463 (20110112/exregion-178)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -2901,43 +2902,43 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.095737] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU1.APPT] (Node f383e498), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.095737] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU1.APPT] (Node f383e498),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.095749] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU1.GCAP] (Node f383e468), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.095749] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU1.GCAP] (Node f383e468),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.095760] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU1._PDC] (Node f383e438), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.095760] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU1._PDC] (Node f383e438),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogFirmwareBugACPIbrightnessControl: Test 1
-klog            , HIGH Kernel message: [ 0.095817] [Firmware Bug]: ACPI:
-klog            ACPI brightness control misses _BQC function
+klog            FAILED [HIGH] KlogAcpiMissingBqc: Test 1, HIGH Kernel
+klog            message: [ 0.095817] [Firmware Bug]: ACPI: ACPI brightness
+klog            control misses _BQC function
 klog            
 klog            ADVICE: _BQC (Brightness Query Current level) seems to be
 klog            missing. This method returns the current brightness level
 klog            of a built-in display output device.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.096257] ACPI Error: Could not map memory at
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.096257] ACPI Error: Could not map memory at
 klog            0x0000000086DB1C20, size 141 (20110112/exregion-178)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -2945,61 +2946,61 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.096273] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU1.APCT] (Node f383e480), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.096273] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU1.APCT] (Node f383e480),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.096285] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU2.GCAP] (Node f383e4e0), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.096285] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU2.GCAP] (Node f383e4e0),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.096295] ACPI Error: Method parse/execution
-klog            failed [_PR_.CPU2._PDC] (Node f383e4b0), AE_NO_MEMORY
-klog            (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.096295] ACPI Error: Method parse
+klog            /execution failed [_PR_.CPU2._PDC] (Node f383e4b0),
+klog            AE_NO_MEMORY (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.096447] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 66, should be 62
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.096447] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 66, should be 62 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.098113] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x2C, should be 0x28
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.098113] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x2C, should be 0x28 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.099413] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - E2, should be D9
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.099413] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - E2, should be D9 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 0.101941] ACPI Error: Field
 klog            [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits)
 klog            (20110112/dsopcode-597)
@@ -3008,170 +3009,169 @@ klog            ADVICE: The field exceeds the allocated buffer size. This
 klog            can lead to unexpected results when fetching data outside
 klog            this region.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.101946] ACPI Error: Method parse
-klog            /execution failed [_SB_.MEM_._CRS] (Node f442af60),
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.101946] ACPI Error: Method parse/execution
+klog            failed [_SB_.MEM_._CRS] (Node f442af60),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.101953] ACPI Error: Method
-klog            execution failed [_SB_.MEM_._CRS] (Node f442af60),
-klog            AE_AML_BUFFER_LIMIT (20110112/uteval-103)
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.101953] ACPI Error: Method execution failed
+klog            [_SB_.MEM_._CRS] (Node f442af60), AE_AML_BUFFER_LIMIT
+klog            (20110112/uteval-103)
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.102803] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 6E, should be 40
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.102803] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 6E, should be 40 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.104297] ACPI Error (psargs-0359): [OSYS] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.104297] ACPI Error (psargs-0359): [OSYS]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.104304] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.ACEL._STA]
-klog            (Node f701c4e0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.104304] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.ACEL._STA] (Node
+klog            f701c4e0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.105061] ACPI Warning:
-klog            Package List length (0xCA) larger than NumElements count
-klog            (0x4), truncated
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.105061] ACPI Warning: Package
+klog            List length (0xCA) larger than NumElements count (0x4),
+klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.106912] ACPI Warning:
-klog            Package List length (0x5) larger than NumElements count
-klog            (0x2), truncated
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.106912] ACPI Warning: Package
+klog            List length (0x5) larger than NumElements count (0x2),
+klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.108470] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 3F, should be 3B
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.108470] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 3F, should be 3B (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.109343] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x29, should be 0x1C
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.109343] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x29, should be 0x1C (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
-klog            HIGH Kernel message: [ 0.109618] ACPI Error: Needed type
-klog            [Reference], found [Device] f7012f90 (20090903
-klog            /exresop-104)
+klog            FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
+klog            message: [ 0.109618] ACPI Error: Needed type [Reference],
+klog            found [Device] f7012f90 (20090903/exresop-104)
 klog            
 klog            ADVICE: An ACPI Method has returned an Device type when a
 klog            Reference type was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.109635] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
-klog            f701adc8), AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 0.109635] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node f701adc8),
+klog            AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.110905] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 32, should be 25
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.110905] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 32, should be 25 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.113709] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 0.113709] ACPI Error: Method parse
 klog            /execution failed [_PR_.CPU1._PDC] (Node f5822150),
 klog            AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.113864] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 0.113864] ACPI Error: Method parse
 klog            /execution failed [_PR_.CPU2._PDC] (Node f58221e0),
 klog            AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.114544] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 0.114544] ACPI Error: Method parse
 klog            /execution failed [_PR_.CPU0._PDC] (Node f54211c8),
 klog            AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.115838] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 79, should be 6C
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.115838] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 79, should be 6C (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.118277] ACPI Error (psargs-0359): [SUPP] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.118277] ACPI Error (psargs-0359): [SUPP]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.118284] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
-klog            f7012780), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.118284] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node f7012780),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.118568] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 2F, should be 22
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.118568] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 2F, should be 22 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.120765] ACPI Warning for
 klog            _SB_.PCI0.P2P_._PRT: Return Package has no elements
 klog            (empty) (20090903/nspredef-433)
@@ -3180,8 +3180,8 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.122347] ACPI Error: Could not map memory at
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.122347] ACPI Error: Could not map memory at
 klog            0x00000000000FFA32, size 0 (20100428/exregion-178)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -3189,16 +3189,16 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.122369] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_PR_.CPU0._PDC] (Node f70191c8),
-klog            AE_NO_MEMORY
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.122369] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU0._PDC] (Node
+klog            f70191c8), AE_NO_MEMORY
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.128150] ACPI Warning for
 klog            _SB_.PCI0.P32_._PRT: Return Package has no elements
 klog            (empty) (20090903/nspredef-433)
@@ -3207,16 +3207,16 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.132540] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - CB, should be C6
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.132540] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - CB, should be C6 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 0.136585] ACPI Error: Field
 klog            [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits)
 klog            (20090903/dsopcode-596)
@@ -3225,50 +3225,49 @@ klog            ADVICE: The field exceeds the allocated buffer size. This
 klog            can lead to unexpected results when fetching data outside
 klog            this region.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.136600] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed
-klog            [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node dd8159d8),
-klog            AE_AML_BUFFER_LIMIT
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.136600] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS]
+klog            (Node dd8159d8), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.136637] ACPI Error (uteval-0250):
-klog            Method execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS]
-klog            (Node dd8159d8), AE_AML_BUFFER_LIMIT
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.136637] ACPI Error (uteval-0250): Method
+klog            execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node
+klog            dd8159d8), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.137394] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 29, should be 1A
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.137394] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 29, should be 1A (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogFirmwareBug: Test 1, HIGH Kernel message
-klog            : [ 0.140000] [Firmware Bug]: the BIOS has corrupted
-klog            hw-PMU resources (MSR 186 is 43003c)
+klog            FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
+klog            message: [ 0.140000] [Firmware Bug]: the BIOS has
+klog            corrupted hw-PMU resources (MSR 186 is 43003c)
 klog            
 klog            ADVICE: The kernel has detected a Firmware bug in the BIOS
 klog            or ACPI which needs investigating and fixing.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.141112] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - ED, should be E8
-klog            20090521 tbutils-246
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.141112] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - ED, should be E8 20090521
+klog            tbutils-246
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.150000] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.150000] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
 klog            ffff880137e47618), AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -3276,7 +3275,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.150000] ACPI Error: No handler for
 klog            Region [ERAM] (ffff880137e58e10) [EmbeddedControl]
 klog            (20110112/evregion-369)
@@ -3285,44 +3284,44 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.154764] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 7D, should be 6E
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.154764] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 7D, should be 6E (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.159797] ACPI Error: Method parse
-klog            /execution failed [_SB_._OSC] (Node f4421648),
-klog            AE_NOT_FOUND (20110413/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.159797] ACPI Error: Method parse/execution
+klog            failed [_SB_._OSC] (Node f4421648), AE_NOT_FOUND (20110413
+klog            /psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.160246] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
-klog            ffff880147830960), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.160246] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.LPC0.EC0_._REG] (Node ffff880147830960),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.160246] ACPI Error: [_SB_.PHSR] Namespace lookup
-klog            failure, AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.160246] ACPI Error: [_SB_.PHSR] Namespace
+klog            lookup failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [MEDIUM] KlogMtrryourCPUsHadInconsistent: Test 1,
-klog            MEDIUM Kernel message: [ 0.160449] mtrr: your CPUs had
+klog            FAILED [MEDIUM] KlogBiosMtrrsInconsistentAcrossCPUs: Test
+klog            1, MEDIUM Kernel message: [ 0.160449] mtrr: your CPUs had
 klog            inconsistent fixed MTRR settings
 klog            
 klog            ADVICE: The fixed Memory Type Range Registers (MTRRs)
@@ -3331,69 +3330,69 @@ klog            across all CPUs which is a firmware bug. The kernel has
 klog            worked around this bug, but it may be worth getting the
 klog            BIOS vendor to fix this.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.163431] ACPI Warning:
-klog            Package List length (0x6) larger than NumElements count
-klog            (0x3), truncated
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.163431] ACPI Warning: Package
+klog            List length (0x6) larger than NumElements count (0x3),
+klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.163687] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xFC, should be 0xFB
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.163687] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xFC, should be 0xFB (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.164073] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xEE, should be 0xED
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.164073] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xEE, should be 0xED (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.165683] ACPI Error: [CDW1] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.165683] ACPI Error: [CDW1] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.165689] ACPI Error: Method parse
-klog            /execution failed [_SB_._OSC] (Node f3821648),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.165689] ACPI Error: Method parse/execution
+klog            failed [_SB_._OSC] (Node f3821648), AE_NOT_FOUND (20110112
+klog            /psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.166264] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_._OSC] (Node
-klog            f701a648), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.166264] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_._OSC] (Node f701a648),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.166294] ACPI Error: Method parse
-klog            /execution failed [_SB_._OSC] (Node f4021648),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.166294] ACPI Error: Method parse/execution
+klog            failed [_SB_._OSC] (Node f4021648), AE_NOT_FOUND (20110112
+klog            /psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.166323] ACPI Error: No handler for
 klog            Region [ERAM] (f7022168) [EmbeddedControl] (20100428
 klog            /evregion-369)
@@ -3402,16 +3401,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.166336] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.166336] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
 klog            (Node f7021bb8), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.166808] ACPI Error: No handler for
 klog            Region [ERAM] (f7023938) [EmbeddedControl] (20100428
 klog            /evregion-369)
@@ -3420,140 +3419,140 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.166808] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.HTEV] (Node
-klog            f701be10), AE_NOT_EXIST
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.166808] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.HTEV] (Node f701be10),
+klog            AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.166808] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.166808] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
 klog            (Node f7024d08), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.169111] ACPI Error: [HPTF] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.169111] ACPI Error: [HPTF] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.169117] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.HPET._STA] (Node f402ae58),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.169117] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.169362] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x18, should be 0x13
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.169362] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x18, should be 0x13 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.169398] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x15, should be 0xAC
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.169398] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x15, should be 0xAC (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.170000] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81a06440)
-klog            , AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.170000] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node ffffffff81a06440),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.170000] ACPI Warning:
-klog            Package List length (0x6) larger than NumElements count
-klog            (0x2), truncated
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.170000] ACPI Warning: Package
+klog            List length (0x6) larger than NumElements count (0x2),
+klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.170352] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0xEA, should be 0x42
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.170352] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0xEA, should be 0x42 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.171073] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x67, should be 0x92
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.171073] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x67, should be 0x92 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.171715] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0xAB
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.171715] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0xAB (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.171916] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.171916] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f700e3d8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.172406] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x22, should be 0x15
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.172406] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x22, should be 0x15 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.172679] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0xA5
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.172679] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0xA5 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.172776] ACPI Warning:
-klog            Package List length (1) larger than NumElements count (0),
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.172776] ACPI Warning: Package
+klog            List length (1) larger than NumElements count (0),
 klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.172868] ACPI Error: No handler for
 klog            Region [RAM_] (f7014618) [EmbeddedControl] 20090521
 klog            evregion-319
@@ -3562,78 +3561,77 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
-klog            message: [ 0.172873] ACPI Error: Region EmbeddedControl(3)
-klog            has no handler 20090521 exfldio-294
+klog            FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
+klog            Kernel message: [ 0.172873] ACPI Error: Region
+klog            EmbeddedControl(3) has no handler 20090521 exfldio-294
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.172880] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.172880] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
 klog            (Node f70159f0), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.173062] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0xAA, should be 0xED
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.173062] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0xAA, should be 0xED (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.173605] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.173605] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f70215e8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.173745] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x83, should be 0x27
-klog            (20110413/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.173745] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x83, should be 0x27 (20110413
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.173917] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c08d6804),
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.173917] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [] (Node c08d6804),
 klog            AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.173917] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c08d6804),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.173917] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node c08d6804), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.175144] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 95, should be 8C
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.175144] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 95, should be 8C (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.175379] ACPI Error: No handler for
 klog            Region [ECXP] (f70218e8) [EmbeddedControl] (20100428
 klog            /evregion-369)
@@ -3642,140 +3640,139 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.175394] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.175394] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU0._OSC] (Node
 klog            f7025558), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.175428] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.175428] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU0._PDC] (Node
 klog            f7025540), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.175892] ACPI Warning:
-klog            Package List length (0x1) larger than NumElements count
-klog            (0x0), truncated
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.175892] ACPI Warning: Package
+klog            List length (0x1) larger than NumElements count (0x0),
+klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.175987] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - D7, should be C8
-klog            20090521 tbutils-246
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.175987] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - D7, should be C8 20090521
+klog            tbutils-246
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.176309] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xCF, should be 0xCE
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.176309] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xCF, should be 0xCE (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.176410] ACPI Error: [RAMB] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110413/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.176410] ACPI Error: [RAMB] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110413/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.176680] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - D6, should be C7
-klog            20090521 tbutils-246
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.176680] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - D6, should be C7 20090521
+klog            tbutils-246
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.176840] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0xAC, should be 0x4D
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.176840] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0xAC, should be 0x4D (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.177033] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - ED, should be EC
-klog            20090521 tbutils-246
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.177033] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - ED, should be EC 20090521
+klog            tbutils-246
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
-klog            Test 1, MEDIUM Kernel message: [ 0.177048] [Firmware Bug]:
-klog            PCI: MMCONFIG at [mem 0xe0000000-0xe03fffff] not reserved
-klog            in ACPI motherboard resources
+klog            FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
+klog            MEDIUM Kernel message: [ 0.177048] [Firmware Bug]: PCI:
+klog            MMCONFIG at [mem 0xe0000000-0xe03fffff] not reserved in
+klog            ACPI motherboard resources
 klog            
 klog            ADVICE: It appears that PCI config space has been
 klog            configured for a specific device but does not appear to be
 klog            reserved by the ACPI motherboard resources.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
-klog            HIGH Kernel message: [ 0.177377] ACPI Error: Needed type
-klog            [Reference], found [Device] f701af90 (20100428
-klog            /exresop-104)
+klog            FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
+klog            message: [ 0.177377] ACPI Error: Needed type [Reference],
+klog            found [Device] f701af90 (20100428/exresop-104)
 klog            
 klog            ADVICE: An ACPI Method has returned an Device type when a
 klog            Reference type was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.177377] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
-klog            f7022dc8), AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 0.177377] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node f7022dc8),
+klog            AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.177506] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0xA1, should be 0x30
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.177506] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0xA1, should be 0x30 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.177670] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 1C, should be 17
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.177670] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 1C, should be 17 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.178040] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xF7, should be 0xE8
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.178040] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xF7, should be 0xE8 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.178420] ACPI Error: No handler for
 klog            Region [SACS] (f701b500) [PCI_Config] (20090903
 klog            /evregion-319)
@@ -3784,17 +3781,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.178434] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.178434] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            f7072000), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.178458] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.178458] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node f7072000),
 klog            AE_NOT_EXIST
 klog            
@@ -3802,17 +3799,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.178486] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.178486] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            f70720a8), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.178510] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.178510] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node f70720a8),
 klog            AE_NOT_EXIST
 klog            
@@ -3820,17 +3817,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.178539] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.178539] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            f7072210), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.178563] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.178563] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node f7072210),
 klog            AE_NOT_EXIST
 klog            
@@ -3838,17 +3835,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.178590] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.178590] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            f70722b8), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.178614] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.178614] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node f70722b8),
 klog            AE_NOT_EXIST
 klog            
@@ -3856,98 +3853,97 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.179475] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0xAB
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.179475] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0xAB (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.179688] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.179688] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f74174c8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.181591] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
-klog            f7022db0), AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 0.181591] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node f7022db0),
+klog            AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.181679] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.181679] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f740f438), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.181959] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x0A, should be 0x09
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.181959] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x0A, should be 0x09 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.182122] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 7D, should be 70
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.182122] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 7D, should be 70 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.182199] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0._OSC] (Node f4c25228),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.182199] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0._OSC] (Node f4c25228), AE_NOT_FOUND
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.182199] ACPI Error: [Z012] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.182199] ACPI Error: [Z012] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.182639] ACPI Error (psargs-0359): [ECEN] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.182639] ACPI Error (psargs-0359): [ECEN]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.182645] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c090665c),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.182645] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node c090665c), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.183306] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.183306] ACPI Error: Method parse
 klog            /execution failed [_PR_.CPU0._PDC] (Node f403a228),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -3955,16 +3951,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.183518] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 10, should be 03
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.183518] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 10, should be 03 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.183725] ACPI Error: No handler for
 klog            Region [SACS] (f70c20f0) [PCI_Config] (20090903
 klog            /evregion-319)
@@ -3973,17 +3969,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.183734] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.183734] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            f70c4180), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.183755] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.183755] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node f70c4180),
 klog            AE_NOT_EXIST
 klog            
@@ -3991,17 +3987,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.183773] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.183773] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            f70c4240), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.183793] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.183793] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node f70c4240),
 klog            AE_NOT_EXIST
 klog            
@@ -4009,17 +4005,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.183812] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.183812] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            f70c43c0), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.183832] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.183832] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node f70c43c0),
 klog            AE_NOT_EXIST
 klog            
@@ -4027,17 +4023,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.183850] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.183850] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            f70c4480), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.183870] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.183870] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node f70c4480),
 klog            AE_NOT_EXIST
 klog            
@@ -4045,367 +4041,363 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.183948] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0x8E
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.183948] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0x8E (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.184086] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x69, should be 0x68
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.184086] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x69, should be 0x68 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.184314] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.184314] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f7015eb8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.185673] ACPI Error (dswload-0659): [___P] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.185673] ACPI Error (dswload-0659): [___P]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.185686] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 0.185686] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._PDC] (Node
 klog            f701a150), AE_INVALID_TABLE_LENGTH
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.185688] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._INI] (Node
-klog            f700f6c0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.185688] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._INI] (Node f700f6c0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.185862] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU2._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 0.185862] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU2._PDC] (Node
 klog            f701a1e0), AE_INVALID_TABLE_LENGTH
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.186281] ACPI Warning:
-klog            Package List length (C) larger than NumElements count (4),
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.186281] ACPI Warning: Package
+klog            List length (C) larger than NumElements count (4),
 klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.186529] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - B9, should be AC
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.186529] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - B9, should be AC (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.187574] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 77, should be 76
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.187574] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 77, should be 76 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.187800] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c0994f7c),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.187800] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node c0994f7c), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.187872] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - B6, should be B3
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.187872] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - B6, should be B3 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.187981] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 8D, should be 8C
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.187981] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 8D, should be 8C (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.187992] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 40, should be 3F
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.187992] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 40, should be 3F (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.188197] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 6A, should be 61
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.188197] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 6A, should be 61 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.188232] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x07, should be 0x59
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.188232] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x07, should be 0x59 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.188487] ACPI Error (psargs-0359): q z Namespace lookup
-klog            failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.188487] ACPI Error (psargs-0359): q z
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.188669] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x05, should be 0xE5
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.188669] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x05, should be 0xE5 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
-klog            HIGH Kernel message: [ 0.189086] ACPI Error: Needed type
-klog            [Reference], found [Device] f700ff90 (20090903
-klog            /exresop-104)
+klog            FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
+klog            message: [ 0.189086] ACPI Error: Needed type [Reference],
+klog            found [Device] f700ff90 (20090903/exresop-104)
 klog            
 klog            ADVICE: An ACPI Method has returned an Device type when a
 klog            Reference type was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.189100] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
-klog            f7017dc8), AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 0.189100] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node f7017dc8),
+klog            AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
-klog            HIGH Kernel message: [ 0.189451] ACPI Error: Needed type
-klog            [Reference], found [Device] f700ef90 20090521 exresop-104
+klog            FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
+klog            message: [ 0.189451] ACPI Error: Needed type [Reference],
+klog            found [Device] f700ef90 20090521 exresop-104
 klog            
 klog            ADVICE: An ACPI Method has returned an Device type when a
 klog            Reference type was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.189466] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
-klog            f7016dc8), AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 0.189466] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node f7016dc8),
+klog            AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.189515] ACPI Error (psargs-0359): [CVCL] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.189515] ACPI Error (psargs-0359): [CVCL]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.189522] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.DIGI._STA]
-klog            (Node f702a390), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.189522] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.DIGI._STA] (Node
+klog            f702a390), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.191013] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x81, should be 0xE5
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.191013] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x81, should be 0xE5 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.191774] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 37, should be 28
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.191774] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 37, should be 28 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.191906] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c098ff6c),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.191906] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node c098ff6c), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.192037] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xD9, should be 0xCC
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.192037] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xD9, should be 0xCC (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 0.192146] ACPI Error (dswload-0781)
-klog            : [_PSW] Namespace lookup failure, AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 0.192146] ACPI Error (dswload-0781):
+klog            [_PSW] Namespace lookup failure, AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.192182] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c08ce7dc),
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.192182] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [] (Node c08ce7dc),
 klog            AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.192983] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - C0, should be B3
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.192983] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - C0, should be B3 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.193750] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c08ce7dc),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.193750] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node c08ce7dc), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.194184] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - C8, should be BF
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.194184] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - C8, should be BF (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.194314] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - AA, should be 9D
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.194314] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - AA, should be 9D (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.194554] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 0.194554] ACPI Error: Method parse
 klog            /execution failed [_PR_.CPU1._PDC] (Node f5821150),
 klog            AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.194701] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 0.194701] ACPI Error: Method parse
 klog            /execution failed [_PR_.CPU2._PDC] (Node f58211e0),
 klog            AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.194897] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xDD, should be 0xD6
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.194897] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xDD, should be 0xD6 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.195685] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 2A, should be 29
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.195685] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 2A, should be 29 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.195754] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 88, should be 83
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.195754] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 88, should be 83 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.196934] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0B, should be 02
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.196934] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0B, should be 02 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.197082] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0xC8, should be 0xE5
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.197082] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0xC8, should be 0xE5 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.197413] ACPI Error: No handler for
 klog            Region [EC__] (f701c5c8) [EmbeddedControl] (20100428
 klog            /evregion-369)
@@ -4414,124 +4406,124 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.197451] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SBRG.EC__._REG]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.197451] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.SBRG.EC__._REG]
 klog            (Node f701e2a0), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.198490] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xB2, should be 0x47
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.198490] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xB2, should be 0x47 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.198823] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 01, should be F4
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.198823] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 01, should be F4 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.199360] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 00, should be AB
-klog            20090521 tbutils-246
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.199360] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 00, should be AB 20090521
+klog            tbutils-246
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.199465] ACPI Error: [CDW1] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110413/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.199465] ACPI Error: [CDW1] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110413/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.199471] ACPI Error: Method parse
-klog            /execution failed [_SB_._OSC] (Node ffff880138e2ea78),
-klog            AE_NOT_FOUND (20110413/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.199471] ACPI Error: Method parse/execution
+klog            failed [_SB_._OSC] (Node ffff880138e2ea78), AE_NOT_FOUND
+klog            (20110413/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.200426] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - A3, should be 9E
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.200426] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - A3, should be 9E (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.200744] ACPI Warning:
-klog            Incorrect checksum in table [ASF!] - 59, should be 08
-klog            20090521 tbutils-246
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.200744] ACPI Warning: Incorrect
+klog            checksum in table [ASF!] - 59, should be 08 20090521
+klog            tbutils-246
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.201013] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 8A, should be 7D
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.201013] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 8A, should be 7D (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.201466] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 0.201466] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._PDC] (Node
 klog            f700e180), AE_INVALID_TABLE_LENGTH
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.203079] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xE1, should be 0xDC
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.203079] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xE1, should be 0xDC (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.204335] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xC1, should be 0x11
-klog            (20110413/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.204335] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xC1, should be 0x11 (20110413
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.204344] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 07, should be 59
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.204344] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 07, should be 59 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.205365] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.205365] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f5422e88),
 klog            AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -4539,79 +4531,79 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.206075] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - BB, should be E5
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.206075] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - BB, should be E5 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.207023] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 00, should be AB
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.207023] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 00, should be AB (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.208479] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x77, should be 0x72
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.208479] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x77, should be 0x72 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.209105] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
-klog            f701f270), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.209105] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node f701f270),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.210543] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - CD, should be CC
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.210543] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - CD, should be CC (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.210667] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - D3, should be C4
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.210667] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - D3, should be C4 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.211069] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x99, should be 0x92
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.211069] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x99, should be 0x92 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.211113] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 7B, should be 76
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.211113] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 7B, should be 76 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.211904] ACPI Error: No handler for
 klog            Region [ERAM] (ee422ed8) [EmbeddedControl] (20100428
 klog            /evregion-369)
@@ -4620,149 +4612,149 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.211928] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.211928] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f701fd08), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.211938] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.211938] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
 klog            (Node ee423708), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.212633] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - E1, should be D3
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.212633] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - E1, should be D3 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.212815] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0._OSC] (Node f7424eb8),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.212815] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0._OSC] (Node f7424eb8), AE_NOT_FOUND
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 0.213084] ACPI Error (dsfield-0143)
-klog            : [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 0.213084] ACPI Error (dsfield-0143):
+klog            [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.213100] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.213100] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f7014ca8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.213771] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - EC, should be E7
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.213771] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - EC, should be E7 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.213827] ACPI Warning:
-klog            Package List length (0xC) larger than NumElements count
-klog            (0x3), truncated
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.213827] ACPI Warning: Package
+klog            List length (0xC) larger than NumElements count (0x3),
+klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.214423] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - FD, should be EF
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.214423] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - FD, should be EF (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.215632] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x0B, should be 0x5B
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.215632] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x0B, should be 0x5B (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.216249] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x27, should be 0xE5
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.216249] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x27, should be 0xE5 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.217060] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.217060] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            dec13ca8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.217763] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.217763] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f7013030), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.217957] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 69, should be 5F
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.217957] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 69, should be 5F (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.218957] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.218957] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f701be88), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.219691] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
-klog            f7013270), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.219691] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node f7013270),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.219959] ACPI Error: No handler for
 klog            Region [SACS] (f70c52a8) [PCI_Config] (20090903
 klog            /evregion-319)
@@ -4771,25 +4763,25 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
-klog            message: [ 0.219968] ACPI Error: Region PCI_Config(2) has
-klog            no handler (20090903/exfldio-295)
+klog            FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
+klog            Kernel message: [ 0.219968] ACPI Error: Region
+klog            PCI_Config(2) has no handler (20090903/exfldio-295)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.219977] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.219977] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            f701ba38), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.220034] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.220034] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node f701ba38),
 klog            AE_NOT_EXIST
 klog            
@@ -4797,17 +4789,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.220068] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.220068] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            f701baf8), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.220107] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.220107] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node f701baf8),
 klog            AE_NOT_EXIST
 klog            
@@ -4815,17 +4807,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.220142] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.220142] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            f701bc78), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.220180] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.220180] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node f701bc78),
 klog            AE_NOT_EXIST
 klog            
@@ -4833,17 +4825,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.220213] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.220213] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            f701bd38), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.220252] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.220252] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node f701bd38),
 klog            AE_NOT_EXIST
 klog            
@@ -4851,25 +4843,25 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.221153] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.HPET._CRS] (Node f402ae70),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.221153] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.HPET._CRS] (Node f402ae70), AE_NOT_FOUND
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.221220] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.RTC_._CRS] (Node f402aee8),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.221220] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.RTC_._CRS] (Node f402aee8), AE_NOT_FOUND
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogMtrryourCPUsHadInconsistent: Test 1,
+klog            FAILED [MEDIUM] KlogBiosMtrrDefTypeIncosistent: Test 1,
 klog            MEDIUM Kernel message: [ 0.221945] mtrr: your CPUs had
 klog            inconsistent MTRRdefType settings
 klog            
@@ -4879,25 +4871,25 @@ klog            consistently set across all CPUs which is a firmware bug.
 klog            The kernel has worked around this bug, but it may be worth
 klog            getting the BIOS vendor to fix this.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.222211] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.222211] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f701beb8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.222869] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - B0, should be 4A
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.222869] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - B0, should be 4A (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 0.222980] ACPI Error: Field
 klog            [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits)
 klog            (20090903/dsopcode-596)
@@ -4906,41 +4898,41 @@ klog            ADVICE: The field exceeds the allocated buffer size. This
 klog            can lead to unexpected results when fetching data outside
 klog            this region.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.222987] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS]
-klog            (Node f7015900), AE_AML_BUFFER_LIMIT
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.222987] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
+klog            f7015900), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.223020] ACPI Error (uteval-0250):
-klog            Method execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.223020] ACPI Error (uteval-0250): Method
+klog            execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
 klog            f7015900), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.223245] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - DB, should be DA
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.223245] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - DB, should be DA (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
-klog            Test 1, MEDIUM Kernel message: [ 0.223485] [Firmware Bug]:
-klog            PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] not reserved
-klog            in ACPI motherboard resources
+klog            FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
+klog            MEDIUM Kernel message: [ 0.223485] [Firmware Bug]: PCI:
+klog            MMCONFIG at [mem 0xf0000000-0xf3ffffff] not reserved in
+klog            ACPI motherboard resources
 klog            
 klog            ADVICE: It appears that PCI config space has been
 klog            configured for a specific device but does not appear to be
 klog            reserved by the ACPI motherboard resources.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.224289] ACPI Warning for
 klog            _SB_.PCI0.P32_._PRT: Return Package has no elements
 klog            (empty) (20100428/nspredef-456)
@@ -4949,16 +4941,16 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.224569] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.224569] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f701fca8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 0.224987] ACPI Error: Field
 klog            [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits)
 klog            (20100428/dsopcode-597)
@@ -4967,266 +4959,266 @@ klog            ADVICE: The field exceeds the allocated buffer size. This
 klog            can lead to unexpected results when fetching data outside
 klog            this region.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.224994] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.MEM_._CRS] (Node
-klog            f7021990), AE_AML_BUFFER_LIMIT
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.224994] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.MEM_._CRS] (Node f7021990),
+klog            AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.225018] ACPI Error (uteval-0250):
-klog            Method execution failed [_SB_.MEM_._CRS] (Node f7021990),
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.225018] ACPI Error (uteval-0250): Method
+klog            execution failed [_SB_.MEM_._CRS] (Node f7021990),
 klog            AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.226224] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 53, should be 84
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.226224] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 53, should be 84 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.227129] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x11, should be 0xE5
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.227129] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x11, should be 0xE5 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.228032] ACPI Error (psargs-0359): [_PR_.C002._PPC]
-klog            Namespace lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.228032] ACPI Error (psargs-0359):
+klog            [_PR_.C002._PPC] Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.228041] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
-klog            (Node f742a558), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.228041] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
+klog            f742a558), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogFirmwareBug: Test 1, HIGH Kernel message
-klog            : [ 0.228469] [Firmware Bug]: the BIOS has corrupted
-klog            hw-PMU resources (MSR 38d is 30)
+klog            FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
+klog            message: [ 0.228469] [Firmware Bug]: the BIOS has
+klog            corrupted hw-PMU resources (MSR 38d is 30)
 klog            
 klog            ADVICE: The kernel has detected a Firmware bug in the BIOS
 klog            or ACPI which needs investigating and fixing.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.228535] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 77, should be 6F
-klog            (20100121/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.228535] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 77, should be 6F (20100121
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.228773] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0._OSC] (Node f4025450),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.228773] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0._OSC] (Node f4025450), AE_NOT_FOUND
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.229334] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.229334] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f7020750), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.229639] ACPI Error (psargs-0359): [CDW1] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.229639] ACPI Error (psargs-0359): [CDW1]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.229644] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
-klog            f7413270), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.229644] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node f7413270),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.230075] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.230075] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f7014630), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.231134] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
-klog            f7012f00), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.231134] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node f7012f00),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.232350] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 15, should be 73
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.232350] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 15, should be 73 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.232460] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 8C, should be 87
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.232460] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 8C, should be 87 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.232733] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.232733] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f701ebd0), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.232830] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xC2, should be 0x84
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.232830] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xC2, should be 0x84 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.233493] ACPI Warning:
-klog            Incorrect checksum in table [GSCI] - 58, should be AA
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.233493] ACPI Warning: Incorrect
+klog            checksum in table [GSCI] - 58, should be AA (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.233542] ACPI Warning:
-klog            Incorrect checksum in table [GSCI] - 0x70, should be 0xD2
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.233542] ACPI Warning: Incorrect
+klog            checksum in table [GSCI] - 0x70, should be 0xD2 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.233946] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 1E, should be E5
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.233946] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 1E, should be E5 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.235518] ACPI Warning:
-klog            Incorrect checksum in table [ASF!] - D8, should be 6E
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.235518] ACPI Warning: Incorrect
+klog            checksum in table [ASF!] - D8, should be 6E (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.236465] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 1D, should be 10
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.236465] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 1D, should be 10 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.236739] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0._OSC] (Node f3c24f00),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.236739] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0._OSC] (Node f3c24f00), AE_NOT_FOUND
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.241360] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xBD, should be 0x89
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.241360] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xBD, should be 0x89 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.242473] ACPI Warning:
-klog            Incorrect checksum in table [GSCI] - 0x28, should be 0x8A
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.242473] ACPI Warning: Incorrect
+klog            checksum in table [GSCI] - 0x28, should be 0x8A (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.244995] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 17, should be 67
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.244995] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 17, should be 67 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 0.245794] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 0.245794] ACPI Warning for
 klog            _SB_.PCI0.PCIB._PRT: Return type mismatch - found Integer,
 klog            expected Package (20100428/nspredef-1053)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.245810] ACPI Error (uteval-0307): Return object type
-klog            is incorrect [_SB_.PCI0.PCIB._PRT] (Node f7022c48),
-klog            AE_TYPE
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.245810] ACPI Error (uteval-0307): Return
+klog            object type is incorrect [_SB_.PCI0.PCIB._PRT] (Node
+klog            f7022c48), AE_TYPE
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.245830] ACPI Error: Type returned from _PRT was
-klog            incorrect: Integer, expected Btypes: 0x8 (20100428
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.245830] ACPI Error: Type returned from _PRT
+klog            was incorrect: Integer, expected Btypes: 0x8 (20100428
 klog            /uteval-313)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -5234,61 +5226,61 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.246137] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - F1, should be E5
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.246137] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - F1, should be E5 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.249246] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 70, should be 6D
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.249246] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 70, should be 6D (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.249570] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.249570] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._OSC] (Node
 klog            f7010198), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.249594] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.249594] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._PDC] (Node
 klog            f7010180), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.249860] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU2._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.249860] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU2._OSC] (Node
 klog            f7010270), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.249882] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU2._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.249882] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU2._PDC] (Node
 klog            f7010258), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.250005] ACPI Error: No handler for
 klog            Region [EC__] (f4424bd0) [EmbeddedControl] (20110112
 klog            /evregion-369)
@@ -5297,16 +5289,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
-klog            message: [ 0.250012] ACPI Error: Region
+klog            FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
+klog            Kernel message: [ 0.250012] ACPI Error: Region
 klog            EmbeddedControl(0x3) has no handler (20110112/exfldio-292)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.250019] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.250019] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.SBRG.EC__._REG] (Node
 klog            f4425bb8), AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -5314,26 +5306,26 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.250572] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.250572] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f7010e88), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.250864] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.250864] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f7013e58), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.250941] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.250941] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f4022e88),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -5341,7 +5333,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogFirmwareBugACPI: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
 klog            message: [ 0.250986] [Firmware Bug]: ACPI: BIOS
 klog            _OSI(Linux) query honored via DMI
 klog            
@@ -5349,17 +5341,17 @@ klog            ADVICE: ACPI driver has detected an ACPI bug. This
 klog            generally points to a bug in an ACPI table. Examine the
 klog            kernel log for more details.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.251711] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - B0, should be E5
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.251711] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - B0, should be E5 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.254947] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.254947] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f3c22e88),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -5367,95 +5359,94 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.255884] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.255884] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f70142b8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.256141] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0xAF, should be 0x59
-klog            (20110413/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.256141] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0xAF, should be 0x59 (20110413
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.257910] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 04, should be 54
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.257910] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 04, should be 54 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.261013] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - DF, should be 2F
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.261013] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - DF, should be 2F (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.262586] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.262586] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f701f390), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogFirmwareBug: Test 1, HIGH Kernel message
-klog            : [ 0.262663] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint
-klog            LPC.BM_STS cleared
+klog            FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
+klog            message: [ 0.262663] pci 0000:00:1f.0: [Firmware Bug]:
+klog            TigerPoint LPC.BM_STS cleared
 klog            
 klog            ADVICE: The kernel has detected a Firmware bug in the BIOS
 klog            or ACPI which needs investigating and fixing.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.264838] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.264838] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f701f2a0), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.265119] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c08d5804),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.265119] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node c08d5804), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.265541] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - E0, should be 30
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.265541] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - E0, should be 30 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.266577] ACPI Warning:
-klog            Incorrect checksum in table [GSCI] - 3B, should be BF
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.266577] ACPI Warning: Incorrect
+klog            checksum in table [GSCI] - 3B, should be BF (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 0.267893] ACPI Warning for
 klog            _TZ_.TZ01._PSL: Return Package type mismatch at index 0 -
 klog            found Processor, expected Reference (20090903
@@ -5465,61 +5456,60 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.268093] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c0927024),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.268093] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node c0927024), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.268171] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c0927024),
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.268171] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [] (Node c0927024),
 klog            AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.268458] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.268458] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f70142a0), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.269488] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_PR_.CPU1.APCT] (Node
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.269488] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1.APCT] (Node
 klog            ffff88007af30560), AE_NO_MEMORY
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.269534] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_PR_.CPU1.GCAP] (Node
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.269534] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1.GCAP] (Node
 klog            ffff88007af30540), AE_NO_MEMORY
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 0.269576] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_PR_.CPU1._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 0.269576] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._PDC] (Node
 klog            ffff88007af30500), AE_NO_MEMORY
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.272427] ACPI Error: No handler for
 klog            Region [SACS] (f71004d8) [PCI_Config] (20090903
 klog            /evregion-319)
@@ -5528,17 +5518,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.272435] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.272435] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            f7102150), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.272452] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.272452] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node f7102150),
 klog            AE_NOT_EXIST
 klog            
@@ -5546,17 +5536,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.272469] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.272469] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            f71021f8), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.272486] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.272486] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node f71021f8),
 klog            AE_NOT_EXIST
 klog            
@@ -5564,17 +5554,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.272503] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.272503] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            f7102360), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.272519] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.272519] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node f7102360),
 klog            AE_NOT_EXIST
 klog            
@@ -5582,17 +5572,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.272536] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.272536] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            f7102408), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.272552] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.272552] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node f7102408),
 klog            AE_NOT_EXIST
 klog            
@@ -5600,133 +5590,133 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.279154] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - B9, should be AE
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.279154] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - B9, should be AE (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.284552] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.IDE1.GTM_]
-klog            (Node f7014858), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 0.284552] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.IDE1.GTM_] (Node
+klog            f7014858), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.284566] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM]
-klog            (Node f7014798), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 0.284566] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM] (Node
+klog            f7014798), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.285468] ACPI Error (psargs-0359): [_PR_.CPU0._PPC]
-klog            Namespace lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.285468] ACPI Error (psargs-0359):
+klog            [_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.285476] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.ADP0.ADJP] (Node
-klog            f7015b10), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.285476] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.ADP0.ADJP] (Node f7015b10),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.285546] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.ADP0._PSR] (Node
-klog            f7015ae0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.285546] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.ADP0._PSR] (Node f7015ae0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.288180] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x81, should be 0x59
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.288180] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x81, should be 0x59 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.288591] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.288591] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f701fd50), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.288966] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0._OSC] (Node f34245b8),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.288966] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0._OSC] (Node f34245b8), AE_NOT_FOUND
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [CRITICAL] KlogFirmwareBugInvalidCriticalThreshold:
-klog            Test 1, CRITICAL Kernel message: [ 0.296054] [Firmware
-klog            Bug]: Invalid critical threshold (0)
+klog            FAILED [CRITICAL] KlogAcpiCrtInvalidThreshold: Test 1,
+klog            CRITICAL Kernel message: [ 0.296054] [Firmware Bug]:
+klog            Invalid critical threshold (0)
 klog            
 klog            ADVICE: ACPI _CRT (Critical Trip Point) is returning a
 klog            threshold lower than zero degrees Celsius which is clearly
 klog            incorrect.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.296149] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.296149] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f701eca8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.296644] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_._OSC] (Node
-klog            ffff88012fc16660), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.296644] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_._OSC] (Node ffff88012fc16660)
+klog            , AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.302946] ACPI Error (psargs-0359): [HPTF] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.302946] ACPI Error (psargs-0359): [HPTF]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.302952] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.HPET._STA]
-klog            (Node ffff88007db32200), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.302952] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.HPET._STA] (Node
+klog            ffff88007db32200), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.307009] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.307009] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f4c22e88),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -5734,70 +5724,70 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.307757] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM]
-klog            (Node f74145a0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.307757] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
+klog            f74145a0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.307837] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM]
-klog            (Node f7414690), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.307837] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
+klog            f7414690), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.308095] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 1F, should be 7F
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.308095] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 1F, should be 7F (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.308151] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM]
-klog            (Node f7414cd8), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.308151] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
+klog            f7414cd8), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.308213] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM]
-klog            (Node f7414dc8), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.308213] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
+klog            f7414dc8), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 0.310609] ACPI Warning for _PR_.CPU1._PSS:
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 0.310609] ACPI Warning for _PR_.CPU1._PSS:
 klog            SubPackage[8,9] - suspicious power dissipation values
 klog            (20100428/nsrepair2-403)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.310767] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x72, should be 0x6A
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.310767] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x72, should be 0x6A (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.311025] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.311025] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f4c250d8),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -5805,8 +5795,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.311041] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.311041] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f54250d8),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -5814,15 +5804,15 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 0.311335] ACPI Warning for _PR_.CPU2._PSS:
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 0.311335] ACPI Warning for _PR_.CPU2._PSS:
 klog            SubPackage[8,9] - suspicious power dissipation values
 klog            (20100428/nsrepair2-403)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorCouldNotEnable: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
 klog            Kernel message: [ 0.311729] ACPI Error: Could not enable
 klog            PowerButton event (20090903/evxfevnt-193)
 klog            
@@ -5830,7 +5820,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningCouldNotEnable: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiCannotEnableFixedEvent: Test 1, HIGH
 klog            Kernel message: [ 0.311932] ACPI Warning: Could not enable
 klog            fixed event 2 (20090903/evxface-146)
 klog            
@@ -5838,35 +5828,35 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.314160] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 91, should be 90
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.314160] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 91, should be 90 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.314451] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81a2b040)
-klog            , AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.314451] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [] (Node ffffffff81a2b040),
+klog            AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.314603] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 8B, should be 8A
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.314603] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 8B, should be 8A (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogMtrryourCPUsHadInconsistent: Test 1,
-klog            MEDIUM Kernel message: [ 0.314675] mtrr: your CPUs had
+klog            FAILED [MEDIUM] KlogBiosMtrrsInconsistentAcrossCPUs: Test
+klog            1, MEDIUM Kernel message: [ 0.314675] mtrr: your CPUs had
 klog            inconsistent variable MTRR settings
 klog            
 klog            ADVICE: The variable Memory Type Range Registers (MTRRs)
@@ -5875,25 +5865,25 @@ klog            across all CPUs which is a firmware bug. The kernel has
 klog            worked around this bug, but it may be worth getting the
 klog            BIOS vendor to fix this.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.316718] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 27, should be 22
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.316718] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 27, should be 22 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.316734] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xF3, should be 0xF2
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.316734] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xF3, should be 0xF2 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.316816] ACPI Error: No handler for
 klog            Region [ERAM] (ffff88007a733d80) [EmbeddedControl]
 klog            (20110112/evregion-369)
@@ -5902,8 +5892,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.316829] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.316829] ACPI Error: Method parse
 klog            /execution failed [_SB_.HTEV] (Node ffff88007a730780),
 klog            AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -5911,8 +5901,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.316839] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.316839] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
 klog            ffff88007a73a078), AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -5920,69 +5910,68 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.317152] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - C1, should be B4
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.317152] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - C1, should be B4 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.317427] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.317427] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._PDC] (Node
 klog            ffff88007d735160), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.317685] ACPI Warning:
-klog            Incorrect checksum in table [ASF!] - 0xFC, should be 0x98
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.317685] ACPI Warning: Incorrect
+klog            checksum in table [ASF!] - 0xFC, should be 0x98 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.319223] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - E7, should be E2
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.319223] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - E7, should be E2 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.321587] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81a12040)
-klog            , AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.321587] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node ffffffff81a12040),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
-klog            HIGH Kernel message: [ 0.321722] ACPI Error: Needed type
-klog            [Reference], found [Device] ffff88007552b900 (20100428
-klog            /exresop-104)
+klog            FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
+klog            message: [ 0.321722] ACPI Error: Needed type [Reference],
+klog            found [Device] ffff88007552b900 (20100428/exresop-104)
 klog            
 klog            ADVICE: An ACPI Method has returned an Device type when a
 klog            Reference type was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.321740] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 0.321740] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff880075532ba0), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.322869] ACPI Error: No handler for
 klog            Region [RAM_] (f7425690) [EmbeddedControl] (20110112
 klog            /evregion-369)
@@ -5991,8 +5980,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.322886] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.322886] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPCB.SNC_.SBRT] (Node
 klog            f7435228), AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -6000,8 +5989,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.322899] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.322899] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
 klog            f7428d98), AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -6009,24 +5998,24 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.323465] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x8D, should be 0x8C
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.323465] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x8D, should be 0x8C (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.323777] ACPI Warning:
-klog            Package List length (0xC) larger than NumElements count
-klog            (0x4), truncated
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.323777] ACPI Warning: Package
+klog            List length (0xC) larger than NumElements count (0x4),
+klog            truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.325321] ACPI Error: No handler for
 klog            Region [ERAM] (ffff88007d32bf78) [EmbeddedControl]
 klog            (20090903/evregion-319)
@@ -6035,43 +6024,43 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.325334] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.KBC0.SMWR]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.325334] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.LPCB.KBC0.SMWR]
 klog            (Node ffff88007d32c8c0), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.325357] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_TZ_.THRM.SFAN] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.325357] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_TZ_.THRM.SFAN] (Node
 klog            ffff88007d328ec0), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.325376] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_TZ_.THRM.THCK] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.325376] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_TZ_.THRM.THCK] (Node
 klog            ffff88007d328f40), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.325396] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_GPE._L02] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.325396] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_GPE._L02] (Node
 klog            ffff88007d3289c0), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorCouldNotEnable: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
 klog            Kernel message: [ 0.325630] ACPI Error: Could not enable
 klog            SleepButton event (20100428/evxfevnt-202)
 klog            
@@ -6079,7 +6068,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningCouldNotEnable: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiCannotEnableFixedEvent: Test 1, HIGH
 klog            Kernel message: [ 0.325636] ACPI Warning: Could not enable
 klog            fixed event 0x3 (20100428/evxface-146)
 klog            
@@ -6087,77 +6076,77 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.328929] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x45, should be 0x40
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.328929] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x45, should be 0x40 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.328954] ACPI Warning:
-klog            Incorrect checksum in table [ASF!] - D9, should be 6D
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.328954] ACPI Warning: Incorrect
+klog            checksum in table [ASF!] - D9, should be 6D (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 0.329218] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 0.329218] ACPI Warning for
 klog            _SB_.PCI0._OSC: Return type mismatch - found Integer,
 klog            expected Buffer (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 0.329373] ACPI Error (dsfield-0143)
-klog            : [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 0.329373] ACPI Error (dsfield-0143):
+klog            [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.329378] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.329378] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff88012b63d760), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.330000] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0xD1, should be 0x75
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.330000] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0xD1, should be 0x75 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.330140] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0xE3, should be 0xDC
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.330140] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0xE3, should be 0xDC (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.330280] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - DE, should be D9
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.330280] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - DE, should be D9 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.330488] ACPI Error: No handler for
 klog            Region [SACS] (ffff88011bf101f8) [PCI_Config] (20090903
 klog            /evregion-319)
@@ -6166,17 +6155,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.330496] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.330496] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            ffff88011bf0d360), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.330513] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.330513] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node
 klog            ffff88011bf0d360), AE_NOT_EXIST
 klog            
@@ -6184,17 +6173,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.330528] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.330528] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            ffff88011bf0d460), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.330545] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.330545] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node
 klog            ffff88011bf0d460), AE_NOT_EXIST
 klog            
@@ -6202,17 +6191,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.330560] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.330560] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            ffff88011bf0d660), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.330576] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.330576] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node
 klog            ffff88011bf0d660), AE_NOT_EXIST
 klog            
@@ -6220,17 +6209,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.330590] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.330590] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            ffff88011bf0d760), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.330606] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.330606] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node
 klog            ffff88011bf0d760), AE_NOT_EXIST
 klog            
@@ -6238,95 +6227,93 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.330759] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.330759] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff88011763c000), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.330793] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0x9A
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.330793] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0x9A (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
-klog            HIGH Kernel message: [ 0.331637] ACPI Error: Needed type
-klog            [Reference], found [Device] ffff88014b82d820 (20090903
-klog            /exresop-104)
+klog            FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
+klog            message: [ 0.331637] ACPI Error: Needed type [Reference],
+klog            found [Device] ffff88014b82d820 (20090903/exresop-104)
 klog            
 klog            ADVICE: An ACPI Method has returned an Device type when a
 klog            Reference type was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.331653] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 0.331653] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff88014b83cac0), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
-klog            HIGH Kernel message: [ 0.331820] ACPI Error: Needed type
-klog            [Reference], found [Device] ffff8800379aa900 (20100428
-klog            /exresop-104)
+klog            FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
+klog            message: [ 0.331820] ACPI Error: Needed type [Reference],
+klog            found [Device] ffff8800379aa900 (20100428/exresop-104)
 klog            
 klog            ADVICE: An ACPI Method has returned an Device type when a
 klog            Reference type was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.331838] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 0.331838] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff8800379bbba0), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.331948] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0C, should be 0B
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.331948] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0C, should be 0B (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.332160] ACPI Error (dswload-0677): [PCI0] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.332160] ACPI Error (dswload-0677): [PCI0]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.332167] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81cf5eb0)
-klog            , AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.332167] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node ffffffff81cf5eb0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.333155] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 4A, should be D9
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.333155] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 4A, should be D9 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.333287] ACPI Error: No handler for
 klog            Region [ERAM] (ffff8800bc638d80) [EmbeddedControl]
 klog            (20090903/evregion-319)
@@ -6335,25 +6322,25 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.333300] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.HTEV] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.333300] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.HTEV] (Node
 klog            ffff8800bc62e600), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.333326] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.333326] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
 klog            (Node ffff8800bc63e9a0), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.333559] ACPI Error: No handler for
 klog            Region [ERAM] (ffff88007db2ad80) [EmbeddedControl]
 klog            (20090903/evregion-319)
@@ -6362,35 +6349,35 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.333573] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.HTEV] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.333573] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.HTEV] (Node
 klog            ffff88007db28600), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.333591] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xF4, should be 0xF3
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.333591] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xF4, should be 0xF3 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.333601] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.333601] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
 klog            (Node ffff88007db309a0), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningParameterCountMismatch: Test
-klog            1, HIGH Kernel message: [ 0.333734] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
+klog            HIGH Kernel message: [ 0.333734] ACPI Warning for
 klog            _SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5,
 klog            ACPI requires 4 (20090903/nspredef-336)
 klog            
@@ -6398,52 +6385,52 @@ klog            ADVICE: The ACPI Method was executing with a different
 klog            number of parameters than the Method expected. This should
 klog            be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.333765] ACPI Error (psargs-0359): [FZHD] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.333765] ACPI Error (psargs-0359): [FZHD]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.333771] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM]
-klog            (Node f7014300), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.333771] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
+klog            f7014300), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.333853] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM]
-klog            (Node f70143f0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.333853] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
+klog            f70143f0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.334143] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM]
-klog            (Node f7014a38), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.334143] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
+klog            f7014a38), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.334206] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM]
-klog            (Node f7014b28), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.334206] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
+klog            f7014b28), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.335658] ACPI Error: No handler for
 klog            Region [ECOR] (ffff88007af355e8) [EmbeddedControl]
 klog            (20110413/evregion-373)
@@ -6452,8 +6439,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.335698] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.335698] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
 klog            ffff88007af36730), AE_NOT_EXIST (20110413/psparse-536)
 klog            
@@ -6461,26 +6448,26 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.335745] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 80, should be 78
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.335745] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 80, should be 78 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.337368] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 8B, should be 86
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.337368] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 8B, should be 86 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.337513] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.337513] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f54243f0),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -6488,34 +6475,34 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.337662] ACPI Error (psargs-0359): [URES] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.337662] ACPI Error (psargs-0359): [URES]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.337662] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PSW] (Node f701f0a8),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.337662] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PSW] (Node f701f0a8),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.338155] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.338155] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff88021302db60), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.338440] ACPI Error: No handler for
 klog            Region [SACS] (ffff88012bb0f1f8) [PCI_Config] (20090903
 klog            /evregion-319)
@@ -6524,26 +6511,26 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.338717] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.338717] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            ffff88012bb111a0), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.338801] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 8B, should be 7E
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.338801] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 8B, should be 7E (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.338905] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.338905] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node
 klog            ffff88012bb111a0), AE_NOT_EXIST
 klog            
@@ -6551,17 +6538,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.339363] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PRID.P_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.339363] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            ffff88012bb11280), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.339551] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.339551] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node
 klog            ffff88012bb11280), AE_NOT_EXIST
 klog            
@@ -6569,53 +6556,53 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.339584] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xE2, should be 0xD5
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.339584] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xE2, should be 0xD5 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.339628] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 91, should be 88
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.339628] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 91, should be 88 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.339857] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 6D, should be 60
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.339857] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 6D, should be 60 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.340003] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D0._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.340003] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            ffff88012bb11460), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.340121] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x1B, should be 0xE5
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.340121] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x1B, should be 0xE5 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.340193] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.340193] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node
 klog            ffff88012bb11460), AE_NOT_EXIST
 klog            
@@ -6623,17 +6610,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.340651] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SECD.S_D1._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.340651] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            ffff88012bb11540), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.340838] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.340838] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node
 klog            ffff88012bb11540), AE_NOT_EXIST
 klog            
@@ -6641,16 +6628,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.341276] ACPI Warning:
-klog            Incorrect checksum in table [ASF!] - F2, should be 8D
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.341276] ACPI Warning: Incorrect
+klog            checksum in table [ASF!] - F2, should be 8D (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.341759] ACPI Error: No handler for
 klog            Region [RAM_] (f74212f8) [EmbeddedControl] (20100428
 klog            /evregion-369)
@@ -6659,106 +6646,106 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.341812] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.341812] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._OSC] (Node
 klog            ffff88017bc14660), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.341843] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.341843] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._PDC] (Node
 klog            ffff88017bc14640), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.342116] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.342116] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
 klog            (Node f742f228), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.342130] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU2._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.342130] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU2._OSC] (Node
 klog            ffff88017bc14780), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.342160] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU2._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.342160] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU2._PDC] (Node
 klog            ffff88017bc14760), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.342409] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.342409] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
 klog            (Node f7422d98), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.342985] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 18, should be 13
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.342985] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 18, should be 13 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.343577] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xD1, should be 0xCA
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.343577] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xD1, should be 0xCA (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.344373] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - C5, should be B8
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.344373] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - C5, should be B8 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.345244] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xA5, should be 0x9C
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.345244] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xA5, should be 0x9C (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.346079] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 7A, should be 71
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.346079] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 7A, should be 71 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 0.347557] ACPI Warning for
 klog            _TZ_.THRM._PSL: Return Package type mismatch at index 0 -
 klog            found [NULL Object Descriptor], expected Reference
@@ -6768,88 +6755,88 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.347883] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 5C, should be 53
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.347883] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 5C, should be 53 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.348936] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x56, should be 0x49
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.348936] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x56, should be 0x49 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.349163] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - E7, should be DA
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.349163] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - E7, should be DA (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.350013] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - D3, should be C6
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.350013] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - D3, should be C6 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.350096] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 13, should be 53
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.350096] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 13, should be 53 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.350158] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x13, should be 0xC8
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.350158] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x13, should be 0xC8 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.350335] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0x83, should be 0x37
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.350335] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0x83, should be 0x37 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.350784] ACPI Warning:
-klog            Incorrect checksum in table [iEIT] - 0x5C, should be 0x51
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.350784] ACPI Warning: Incorrect
+klog            checksum in table [iEIT] - 0x5C, should be 0x51 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.351065] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0x04, should be 0xCA
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.351065] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0x04, should be 0xCA (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.353198] ACPI Error: No handler for
 klog            Region [ERAM] (ffff88013be53e10) [EmbeddedControl]
 klog            (20090903/evregion-319)
@@ -6858,61 +6845,60 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.353215] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.353215] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
 klog            (Node ffff88013be520e0), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.353356] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x05, should be 0x36
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.353356] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x05, should be 0x36 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 0.353401] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 0.353401] ACPI Warning for
 klog            _SB_.LATA._CRS: Return type mismatch - found Integer,
 klog            expected Buffer (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.353406] ACPI Error (uteval-0307): Return object type
-klog            is incorrect [_SB_.LATA._CRS] (Node ffff88006df2eb00),
-klog            AE_TYPE
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.353406] ACPI Error (uteval-0307): Return
+klog            object type is incorrect [_SB_.LATA._CRS] (Node
+klog            ffff88006df2eb00), AE_TYPE
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededReferenceFound: Test 1,
-klog            HIGH Kernel message: [ 0.353652] ACPI Error: Needed type
-klog            [Reference], found [Device] ffff8800379a6800 (20090903
-klog            /exresop-104)
+klog            FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
+klog            message: [ 0.353652] ACPI Error: Needed type [Reference],
+klog            found [Device] ffff8800379a6800 (20090903/exresop-104)
 klog            
 klog            ADVICE: An ACPI Method has returned an Device type when a
 klog            Reference type was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.353652] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 0.353652] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff8800379bba80), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.355135] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.355135] ACPI Error: Method parse
 klog            /execution failed [_PR_.CPU0._PDC] (Node ffff88007a738ca8)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -6920,9 +6906,9 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.355798] ACPI Error: ACPI path has too many parent
-klog            prefixes (^) - reached beyond root node (20090903
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.355798] ACPI Error: ACPI path has too many
+klog            parent prefixes (^) - reached beyond root node (20090903
 klog            /nsaccess-429)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -6930,9 +6916,9 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogBIOSBugtimerNotConnected: Test 1, HIGH
-klog            Kernel message: [ 0.356001] ..MP-BIOS bug: 8254 timer not
-klog            connected to IO-APIC
+klog            FAILED [HIGH] KlogBiosTimerNotConnectedtoIoApic: Test 1,
+klog            HIGH Kernel message: [ 0.356001] ..MP-BIOS bug: 8254 timer
+klog            not connected to IO-APIC
 klog            
 klog            ADVICE: The BIOS is reporting the ExtINTA I/O APIC input
 klog            from the cascaded 8259A as the timer interrupt input. The
@@ -6940,7 +6926,7 @@ klog            kernel has detected just one pin, so it has to check the
 klog            timer directly and through the 8259A because of the broken
 klog            BIOS reporting.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.356108] ACPI Error: No handler for
 klog            Region [ECF2] (ffff88013ba313a8) [EmbeddedControl]
 klog            (20090903/evregion-319)
@@ -6949,107 +6935,107 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
-klog            message: [ 0.356113] ACPI Error: Region EmbeddedControl(3)
-klog            has no handler (20090903/exfldio-295)
+klog            FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
+klog            Kernel message: [ 0.356113] ACPI Error: Region
+klog            EmbeddedControl(3) has no handler (20090903/exfldio-295)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.356119] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [P8XH] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.356119] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [P8XH] (Node
 klog            ffff88013ba28020), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.356143] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_GPE._L02] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.356143] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_GPE._L02] (Node
 klog            ffff88013ba32120), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.356280] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x33, should be 0xD7
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.356280] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x33, should be 0xD7 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.356754] ACPI Warning:
-klog            Incorrect checksum in table [ASF!] - ED, should be 83
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.356754] ACPI Warning: Incorrect
+klog            checksum in table [ASF!] - ED, should be 83 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.357018] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xA6, should be 0xA1
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.357018] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xA6, should be 0xA1 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.357902] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0xE9, should be 0xFE
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.357902] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0xE9, should be 0xFE (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.358086] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x11, should be 0x10
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.358086] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x11, should be 0x10 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.359183] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.359183] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f7021a68), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.359915] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x7D, should be 0x59
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.359915] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x7D, should be 0x59 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.360335] ACPI Warning:
-klog            Incorrect checksum in table [GSCI] - 0x28, should be 0xD4
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.360335] ACPI Warning: Incorrect
+klog            checksum in table [GSCI] - 0x28, should be 0xD4 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.361596] ACPI Error: ACPI path has too many parent
-klog            prefixes (^) - reached beyond root node (20100428
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.361596] ACPI Error: ACPI path has too many
+klog            parent prefixes (^) - reached beyond root node (20100428
 klog            /nsaccess-429)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -7057,34 +7043,33 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.362481] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c091bffc),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.362481] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node c091bffc), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.362557] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c091bffc),
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.362557] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [] (Node c091bffc),
 klog            AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 0.362606] ACPI Error (dsfield-0487)
-klog            : [SMIC] Namespace lookup failure, AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 0.362606] ACPI Error (dsfield-0487):
+klog            [SMIC] Namespace lookup failure, AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.362751] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.362751] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f40255d0),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -7092,7 +7077,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogFirmwareBugACPI: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
 klog            message: [ 0.362859] [Firmware Bug]: ACPI: BIOS
 klog            _OSI(Linux) query honored via cmdline
 klog            
@@ -7100,60 +7085,60 @@ klog            ADVICE: ACPI driver has detected an ACPI bug. This
 klog            generally points to a bug in an ACPI table. Examine the
 klog            kernel log for more details.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 0.362870] ACPI Error (dsfield-0140)
-klog            : [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 0.362870] ACPI Error (dsfield-0140):
+klog            [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.362886] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.362886] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f7014a80), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.363488] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.363488] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._PDC] (Node
 klog            ffff880227048f60), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.363621] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 3C, should be 3B
-klog            20090521 tbutils-246
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.363621] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 3C, should be 3B 20090521
+klog            tbutils-246
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.363728] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 75, should be 74
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.363728] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 75, should be 74 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.363981] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - BB, should be AE
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.363981] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - BB, should be AE (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.364356] ACPI Warning: For
 klog            _SB_.PCI0.P2P_._PRT: Return Package has no elements
 klog            (empty) (20110112/nspredef-456)
@@ -7162,8 +7147,8 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.364521] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.364521] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f44285b8),
 klog            AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -7171,71 +7156,71 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.366917] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - BD, should be B6
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.366917] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - BD, should be B6 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.367185] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - B2, should be A5
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.367185] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - B2, should be A5 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.367524] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0xAA, should be 0x59
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.367524] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0xAA, should be 0x59 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.368838] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 23, should be 1E
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.368838] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 23, should be 1E (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.369986] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x61, should be 0x58
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.369986] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x61, should be 0x58 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.370263] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x73, should be 0xE5
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.370263] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x73, should be 0xE5 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.371572] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0xFB, should be 0xE5
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.371572] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0xFB, should be 0xE5 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.372475] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.372475] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f5426ca8),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -7243,8 +7228,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.372684] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.372684] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node dd825ca8),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -7252,44 +7237,42 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.375383] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x90, should be 0x83
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.375383] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x90, should be 0x83 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.375585] ACPI Error (dswload-0677): [USB0] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.375585] ACPI Error (dswload-0677): [USB0]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.375609] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c09fb6c8),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.375609] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node c09fb6c8), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.375966] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node c0992f7c),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.375966] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node c0992f7c), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.376047] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.376047] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node dd825ca8),
 klog            AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -7297,7 +7280,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.376092] ACPI Error: No handler for
 klog            Region [ECXP] (ffff88007cf31ab0) [EmbeddedControl]
 klog            (20100428/evregion-369)
@@ -7306,26 +7289,26 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.376106] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.376106] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU0._OSC] (Node
 klog            ffff88007cf3f440), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.376141] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.376141] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU0._PDC] (Node
 klog            ffff88007cf3f420), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.376733] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.376733] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f5026ca8),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -7333,160 +7316,160 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.378931] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 33, should be 2C
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.378931] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 33, should be 2C (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.379815] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - D5, should be 3E
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.379815] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - D5, should be 3E (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.380609] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 8C, should be DC
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.380609] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 8C, should be DC (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.381039] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.381039] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f7016a38), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.381211] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 8E, should be 89
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.381211] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 8E, should be 89 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
-klog            Test 1, MEDIUM Kernel message: [ 0.381478] [Firmware Bug]:
-klog            PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] not reserved
-klog            in ACPI motherboard resources
+klog            FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
+klog            MEDIUM Kernel message: [ 0.381478] [Firmware Bug]: PCI:
+klog            MMCONFIG at [mem 0xe0000000-0xe06fffff] not reserved in
+klog            ACPI motherboard resources
 klog            
 klog            ADVICE: It appears that PCI config space has been
 klog            configured for a specific device but does not appear to be
 klog            reserved by the ACPI motherboard resources.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.382740] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_._OSC] (Node
-klog            ffff88003f013ca0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.382740] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_._OSC] (Node ffff88003f013ca0)
+klog            , AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.383518] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x0F, should be 0xE7
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.383518] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x0F, should be 0xE7 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.384684] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x4E, should be 0x3F
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.384684] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x4E, should be 0x3F (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.384722] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.HPET._CRS]
-klog            (Node ffff88007db32220), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.384722] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.HPET._CRS] (Node
+klog            ffff88007db32220), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.384811] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.RTC_._CRS]
-klog            (Node ffff88007db322c0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.384811] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.RTC_._CRS] (Node
+klog            ffff88007db322c0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.385777] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 00, should be 89
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.385777] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 00, should be 89 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.388556] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 6A, should be E5
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.388556] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 6A, should be E5 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.388736] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 8C, should be 83
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.388736] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 8C, should be 83 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.390341] ACPI Error: [GUR_._BAS] Namespace lookup
-klog            failure, AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.390341] ACPI Error: [GUR_._BAS] Namespace
+klog            lookup failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.390354] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.MBIO._CRS] (Node
-klog            ffff880078f30aa0), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.390354] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.MBIO._CRS] (Node ffff880078f30aa0),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
-klog            Test 1, MEDIUM Kernel message: [ 0.390975] [Firmware Bug]:
-klog            PCI: MMCONFIG at [mem 0xe0000000-0xe08fffff] not reserved
-klog            in ACPI motherboard resources
+klog            FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
+klog            MEDIUM Kernel message: [ 0.390975] [Firmware Bug]: PCI:
+klog            MMCONFIG at [mem 0xe0000000-0xe08fffff] not reserved in
+klog            ACPI motherboard resources
 klog            
 klog            ADVICE: It appears that PCI config space has been
 klog            configured for a specific device but does not appear to be
 klog            reserved by the ACPI motherboard resources.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.393086] ACPI Warning: For
 klog            _TZ_.THRM._PSL: Return Package has no elements (empty)
 klog            (20110413/nspredef-456)
@@ -7495,16 +7478,16 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.395834] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.395834] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff88013ba393a0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugACPIInvalidBIOS: Test 1,
+klog            FAILED [MEDIUM] KlogAcpiInvalidPssFrequency: Test 1,
 klog            MEDIUM Kernel message: [ 0.396197] [Firmware Bug]: ACPI:
 klog            Invalid BIOS _PSS frequency: 0x0 MHz
 klog            
@@ -7512,43 +7495,43 @@ klog            ADVICE: _PSS (Performance Supported States) package has an
 klog            incorrectly define core frequency (first DWORD entry in
 klog            the _PSS package).
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.396945] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 00, should be 96
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.396945] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 00, should be 96 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.397644] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - F9, should be E5
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.397644] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - F9, should be E5 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.398231] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 12, should be 07
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.398231] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 12, should be 07 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.398290] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 01, should be 23
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.398290] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 01, should be 23 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 0.399990] ACPI Error: Field
 klog            [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits)
 klog            (20110112/dsopcode-597)
@@ -7557,78 +7540,78 @@ klog            ADVICE: The field exceeds the allocated buffer size. This
 klog            can lead to unexpected results when fetching data outside
 klog            this region.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.399996] ACPI Error: Method parse
-klog            /execution failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000)
-klog            , AE_AML_BUFFER_LIMIT (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.399996] ACPI Error: Method parse/execution
+klog            failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000),
+klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.400012] ACPI Error: Method
-klog            execution failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000),
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.400012] ACPI Error: Method execution failed
+klog            [_SB_.MEM_._CRS] (Node ffff8800b8e38000),
 klog            AE_AML_BUFFER_LIMIT (20110112/uteval-103)
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.400212] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0x88
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.400212] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0x88 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.401117] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0F, should be E7
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.401117] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0F, should be E7 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.404616] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - A5, should be A0
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.404616] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - A5, should be A0 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.406016] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.ADP0.ADJP] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.406016] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.ADP0.ADJP] (Node
 klog            ffff88013ba3c5a0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.406038] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.ADP0._PSR] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.406038] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.ADP0._PSR] (Node
 klog            ffff88013ba3c560), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.407719] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 72, should be 69
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.407719] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 72, should be 69 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.408529] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.408529] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f4c285b8),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -7636,16 +7619,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.414781] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - CD, should be C8
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.414781] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - CD, should be C8 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 0.415975] ACPI Warning for
 klog            _TZ_.THRM._PSL: Return Package type mismatch at index 0 -
 klog            found [NULL Object Descriptor], expected Reference
@@ -7655,26 +7638,25 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.418105] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 76, should be FE
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.418105] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 76, should be FE (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 0.420210] ACPI Error: [CAPD]
-klog            Namespace lookup failure, AE_ALREADY_EXISTS (20110413
-klog            /dsfield-143)
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 0.420210] ACPI Error: [CAPD] Namespace
+klog            lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.420218] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.420218] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node ffff88022b749b18)
 klog            , AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -7682,7 +7664,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 0.420241] ACPI Error: Field
 klog            [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits)
 klog            (20100428/dsopcode-597)
@@ -7691,40 +7673,40 @@ klog            ADVICE: The field exceeds the allocated buffer size. This
 klog            can lead to unexpected results when fetching data outside
 klog            this region.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.420248] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS]
-klog            (Node ffff88013142fac0), AE_AML_BUFFER_LIMIT
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.420248] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
+klog            ffff88013142fac0), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.420284] ACPI Error (uteval-0250):
-klog            Method execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.420284] ACPI Error (uteval-0250): Method
+klog            execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
 klog            ffff88013142fac0), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.420323] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0xC3, should be 0x59
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.420323] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0xC3, should be 0x59 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogPackageListLengthlargerThantruncated:
-klog            Test 1, HIGH Kernel message: [ 0.422032] ACPI Warning
+klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
+klog            1, HIGH Kernel message: [ 0.422032] ACPI Warning
 klog            (dsobject-0501): Package List length (6) larger than
 klog            NumElements count (3), truncated
 klog            
 klog            ADVICE: A Method has returned a Package List that was
 klog            larger than expected.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.424909] ACPI Warning for
 klog            _SB_.PCI0.P2P_._PRT: Return Package has no elements
 klog            (empty) (20100428/nspredef-456)
@@ -7733,76 +7715,78 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.426823] ACPI Error (psargs-0359): [_PR_.CPU0._PSS]
-klog            Namespace lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.426823] ACPI Error (psargs-0359):
+klog            [_PR_.CPU0._PSS] Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.426833] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.AC__.ADJP] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.426833] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.AC__.ADJP] (Node
 klog            ffff88007b32ee00), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.426872] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.AC__._PSR] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.426872] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.AC__._PSR] (Node
 klog            ffff88007b32edc0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 0.429245] ACPI Warning for _PR_.CPU0._TSD: Incorrectly
-klog            formed Package, attempting repair (20090903/nsrepair-200)
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 0.429245] ACPI Warning for _PR_.CPU0._TSD:
+klog            Incorrectly formed Package, attempting repair (20090903
+klog            /nsrepair-200)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 0.430887] ACPI Warning for _PR_.CPU1._TSD: Incorrectly
-klog            formed Package, attempting repair (20090903/nsrepair-200)
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 0.430887] ACPI Warning for _PR_.CPU1._TSD:
+klog            Incorrectly formed Package, attempting repair (20090903
+klog            /nsrepair-200)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.434593] ACPI Warning:
-klog            Incorrect checksum in table [GSCI] - D2, should be A5
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.434593] ACPI Warning: Incorrect
+klog            checksum in table [GSCI] - D2, should be A5 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.436921] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.436921] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff88013b62ccc0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.438019] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - C8, should be E5
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.438019] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - C8, should be E5 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningParameterCountMismatch: Test
-klog            1, HIGH Kernel message: [ 0.440405] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
+klog            HIGH Kernel message: [ 0.440405] ACPI Warning for
 klog            _SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5,
 klog            ACPI requires 4 (20100428/nspredef-352)
 klog            
@@ -7810,17 +7794,17 @@ klog            ADVICE: The ACPI Method was executing with a different
 klog            number of parameters than the Method expected. This should
 klog            be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.441805] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - B2, should be B1
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.441805] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - B2, should be B1 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.444897] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.444897] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f4c252a0),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -7828,17 +7812,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.450562] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0._OSC] (Node ffff8800b8e33ca8)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.450562] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0._OSC] (Node ffff8800b8e33ca8),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.451517] ACPI Error (psargs-0359): [GUR_._BAS]
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.451517] ACPI Error (psargs-0359): [GUR_._BAS]
 klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -7846,16 +7830,16 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.451682] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.MBIO._CRS]
-klog            (Node ffff88007bb2a880), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.451682] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.MBIO._CRS] (Node
+klog            ffff88007bb2a880), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 0.453111] ACPI Warning for
 klog            _SB_.BAT1._BIF: Return Package type mismatch at index 12 -
 klog            found Integer, expected String/Buffer (20090903
@@ -7865,7 +7849,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 0.454555] ACPI Warning for
 klog            _PR_.CPU0._PSS: Return Package type mismatch at index 3 -
 klog            found Integer, expected Package (20100428/nspredef-1059)
@@ -7874,7 +7858,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 0.454838] ACPI Warning for
 klog            _PR_.CPU1._PSS: Return Package type mismatch at index 3 -
 klog            found Integer, expected Package (20100428/nspredef-1059)
@@ -7883,25 +7867,25 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.455674] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 83, should be 7F
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.455674] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 83, should be 7F (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.459126] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 4C, should be 12
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.459126] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 4C, should be 12 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.460622] ACPI Warning: For
 klog            _SB_.PCI0.P32_._PRT: Return Package has no elements
 klog            (empty) (20110112/nspredef-456)
@@ -7910,17 +7894,16 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 0.461767] ACPI Error: [CAPB]
-klog            Namespace lookup failure, AE_ALREADY_EXISTS (20110413
-klog            /dsfield-143)
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 0.461767] ACPI Error: [CAPB] Namespace
+klog            lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.461793] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.461793] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node ffff88003cdb0f00)
 klog            , AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -7928,80 +7911,80 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.462573] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 95, should be 5E
-klog            20090521 tbutils-246
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.462573] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 95, should be 5E 20090521
+klog            tbutils-246
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.468216] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._CST] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.468216] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU1._CST] (Node
 klog            ffff88007c5cc380), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.468859] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.468859] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff88003f1afdc0), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.475076] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM]
-klog            (Node f701eb28), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.475076] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
+klog            f701eb28), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.475159] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM]
-klog            (Node f701ec18), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.475159] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
+klog            f701ec18), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.475441] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM]
-klog            (Node f70202a0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.475441] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
+klog            f70202a0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.475506] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM]
-klog            (Node f7020390), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.475506] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
+klog            f7020390), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.479385] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0x88
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.479385] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0x88 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.479821] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.479821] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f3c28a68),
 klog            AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -8009,8 +7992,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.481067] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.481067] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f4028a68),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8018,8 +8001,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.482955] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.482955] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9b0f00)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8027,8 +8010,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.484974] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.484974] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f3c28a68),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8036,7 +8019,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 0.485955] ACPI Warning: For
 klog            _TZ_.THRM._PSL: Return Package type mismatch at index 0 -
 klog            found [NULL Object Descriptor], expected Reference
@@ -8046,35 +8029,35 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.487180] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x33, should be 0x32
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.487180] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x33, should be 0x32 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.487365] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x99, should be 0x98
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.487365] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x99, should be 0x98 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.490256] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x22, should be 0x53
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.490256] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x22, should be 0x53 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningParameterCountMismatch: Test
-klog            1, HIGH Kernel message: [ 0.490491] ACPI Warning: For
+klog            FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
+klog            HIGH Kernel message: [ 0.490491] ACPI Warning: For
 klog            _SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5,
 klog            ACPI requires 4 (20110413/nspredef-352)
 klog            
@@ -8082,43 +8065,43 @@ klog            ADVICE: The ACPI Method was executing with a different
 klog            number of parameters than the Method expected. This should
 klog            be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.491491] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0x4A, should be 0xD9
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.491491] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0x4A, should be 0xD9 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.492569] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81a08440)
-klog            , AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.492569] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node ffffffff81a08440),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 0.492648] ACPI Error (dswload-0781)
-klog            : [PRID] Namespace lookup failure, AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 0.492648] ACPI Error (dswload-0781):
+klog            [PRID] Namespace lookup failure, AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.492655] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81a08440)
-klog            , AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.492655] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [] (Node ffffffff81a08440),
+klog            AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.492811] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.492811] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f5428a68),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8126,25 +8109,25 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.494198] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0x37, should be 0xC7
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.494198] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0x37, should be 0xC7 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.496094] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - F8, should be 9C
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.496094] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - F8, should be 9C (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.497662] ACPI Warning
 klog            (nspredef-0357): _SB_.PCI0.P2P_._PRT: Return Package has
 klog            no elements (empty) [20080926]
@@ -8153,44 +8136,44 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.497913] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xFA, should be 0xF9
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.497913] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xFA, should be 0xF9 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.498775] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xB2, should be 0xB1
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.498775] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xB2, should be 0xB1 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.498976] ACPI Warning:
-klog            Incorrect checksum in table [GSCI] - 7B, should be 04
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.498976] ACPI Warning: Incorrect
+klog            checksum in table [GSCI] - 7B, should be 04 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.500043] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
-klog            (Node ffff8800ac22d040), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.500043] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
+klog            ffff8800ac22d040), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.501138] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.501138] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f3c28a38),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8198,8 +8181,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.505041] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.505041] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f4028a38),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8207,8 +8190,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.513609] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.513609] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f5428a38),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8216,8 +8199,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.516158] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.516158] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f74296c0),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8225,8 +8208,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.526190] ACPI Warning
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.526190] ACPI Warning
 klog            (tbutils-0217): Incorrect checksum in table [OEMB] - F3,
 klog            should be EE [20080926]
 klog            
@@ -8234,8 +8217,8 @@ klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.527455] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.527455] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f5422df8),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8243,8 +8226,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.533028] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.533028] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9b0bb8)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8252,25 +8235,25 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.534826] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0x7F
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.534826] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0x7F (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.538081] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - C1, should be BC
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.538081] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - C1, should be BC (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.539131] ACPI Error: No handler for
 klog            Region [RAM_] (ffff88012fa36a20) [EmbeddedControl]
 klog            (20110112/evregion-369)
@@ -8279,8 +8262,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.539149] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.539149] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPCB.SNC_.SBRT] (Node
 klog            ffff88012fa4f398), AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -8288,8 +8271,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.539161] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.539161] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
 klog            ffff88012fa396b8), AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -8297,71 +8280,72 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.540036] ACPI Error: [_PR_.C002._PPC] Namespace lookup
-klog            failure, AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.540036] ACPI Error: [_PR_.C002._PPC]
+klog            Namespace lookup failure, AE_NOT_FOUND (20110112
+klog            /psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.540046] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
-klog            ffff880107e623c0), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.540046] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.LPC0.EC0_._REG] (Node ffff880107e623c0),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.541238] ACPI Error: Method parse
-klog            /execution failed [_TZ_.C2E8] (Node f482d108),
-klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 0.541238] ACPI Error: Method parse/execution
+klog            failed [_TZ_.C2E8] (Node f482d108), AE_AML_PACKAGE_LIMIT
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.541258] ACPI Error: Method parse
-klog            /execution failed [_TZ_.C2E7] (Node f482d0f0),
-klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 0.541258] ACPI Error: Method parse/execution
+klog            failed [_TZ_.C2E7] (Node f482d0f0), AE_AML_PACKAGE_LIMIT
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.541277] ACPI Error: Method parse
-klog            /execution failed [_TZ_.TZ2_._TMP] (Node f482d7c8),
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 0.541277] ACPI Error: Method parse/execution
+klog            failed [_TZ_.TZ2_._TMP] (Node f482d7c8),
 klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.548650] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 00, should be 87
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.548650] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 00, should be 87 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.550271] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0xDC, should be 0x0E
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.550271] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0xDC, should be 0x0E (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.563415] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.563415] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9af848)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8369,7 +8353,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.566332] ACPI Warning: For
 klog            _TZ_.THRM._AL0: Return Package has no elements (empty)
 klog            (20110413/nspredef-456)
@@ -8378,25 +8362,25 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.568235] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 00, should be 7F
-klog            20090521 tbutils-246
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.568235] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 00, should be 7F 20090521
+klog            tbutils-246
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.581397] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x24, should be 0x16
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.581397] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x24, should be 0x16 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.583718] ACPI Warning:
 klog            _SB_.PCI0.PCI2._PRT: Return Package has no elements
 klog            (empty) 20090521 nspredef-434
@@ -8405,16 +8389,16 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.591409] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x1E, should be 0x16
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.591409] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x1E, should be 0x16 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 0.591722] ACPI Error: Field
 klog            [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits)
 klog            (20100428/dsopcode-597)
@@ -8423,68 +8407,68 @@ klog            ADVICE: The field exceeds the allocated buffer size. This
 klog            can lead to unexpected results when fetching data outside
 klog            this region.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.591729] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.MEM_._CRS] (Node
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.591729] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.MEM_._CRS] (Node
 klog            ffff8800b4040f60), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.591760] ACPI Error (uteval-0250):
-klog            Method execution failed [_SB_.MEM_._CRS] (Node
-klog            ffff8800b4040f60), AE_AML_BUFFER_LIMIT
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.591760] ACPI Error (uteval-0250): Method
+klog            execution failed [_SB_.MEM_._CRS] (Node ffff8800b4040f60),
+klog            AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.593045] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.PPCE] (Node
-klog            f702c7b0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.593045] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.PPCE] (Node f702c7b0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.593072] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [EV4_] (Node f7019648),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.593072] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [EV4_] (Node f7019648),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.593095] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SMIE] (Node f702ea08),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.593095] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [SMIE] (Node f702ea08),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.593119] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [NEVT] (Node f702e9c0),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.593119] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [NEVT] (Node f702e9c0),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.593142] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
-klog            (Node f702e678), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.593142] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
+klog            f702e678), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
+klog            FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
 klog            HIGH Kernel message: [ 0.597675] ACPI Warning for
 klog            _SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
 klog            expected String at index 9 (20090903/nsrepair-132)
@@ -8494,7 +8478,7 @@ klog            type and ACPI driver automatically converted it to a
 klog            String. It is worth fixing this in the DSDT or SSDT even
 klog            if the kernel fixes it at run time.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
+klog            FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
 klog            HIGH Kernel message: [ 0.597680] ACPI Warning for
 klog            _SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
 klog            expected String at index 10 (20090903/nsrepair-132)
@@ -8504,7 +8488,7 @@ klog            type and ACPI driver automatically converted it to a
 klog            String. It is worth fixing this in the DSDT or SSDT even
 klog            if the kernel fixes it at run time.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
+klog            FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
 klog            HIGH Kernel message: [ 0.597685] ACPI Warning for
 klog            _SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
 klog            expected String at index 11 (20090903/nsrepair-132)
@@ -8514,7 +8498,7 @@ klog            type and ACPI driver automatically converted it to a
 klog            String. It is worth fixing this in the DSDT or SSDT even
 klog            if the kernel fixes it at run time.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
+klog            FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
 klog            HIGH Kernel message: [ 0.597689] ACPI Warning for
 klog            _SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to
 klog            expected String at index 12 (20090903/nsrepair-132)
@@ -8524,44 +8508,43 @@ klog            type and ACPI driver automatically converted it to a
 klog            String. It is worth fixing this in the DSDT or SSDT even
 klog            if the kernel fixes it at run time.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.600451] ACPI Error (psargs-0359): [_SB_.PCI0.EGBA]
-klog            Namespace lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.600451] ACPI Error (psargs-0359):
+klog            [_SB_.PCI0.EGBA] Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.600456] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPC_.MBRD._CRS]
-klog            (Node f7416318), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.600456] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPC_.MBRD._CRS] (Node
+klog            f7416318), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.612305] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 6C, should be FB
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.612305] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 6C, should be FB (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 0.612793] ACPI Error: [CAPB]
-klog            Namespace lookup failure, AE_ALREADY_EXISTS (20110112
-klog            /dsfield-143)
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 0.612793] ACPI Error: [CAPB] Namespace
+klog            lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.612820] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.612820] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9ae190)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8569,16 +8552,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.614155] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 37, should be C7
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.614155] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 37, should be C7 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 0.620955] ACPI Warning for
 klog            _TZ_.THRM._PSL: Return Package type mismatch at index 0 -
 klog            found Processor, expected Reference (20090903
@@ -8588,62 +8571,62 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.621415] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.PPCE] (Node
-klog            f702c828), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.621415] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.PPCE] (Node f702c828),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.621443] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [EV4_] (Node f7019ed0),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.621443] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [EV4_] (Node f7019ed0),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.621468] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SMIE] (Node f702ea98),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.621468] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [SMIE] (Node f702ea98),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.621493] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [NEVT] (Node f702ea50),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.621493] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [NEVT] (Node f702ea50),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.621518] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
-klog            (Node f702e708), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.621518] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
+klog            f702e708), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
-klog            Test 1, MEDIUM Kernel message: [ 0.625680] [Firmware Bug]:
-klog            PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved
-klog            in ACPI motherboard resources
+klog            FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
+klog            MEDIUM Kernel message: [ 0.625680] [Firmware Bug]: PCI:
+klog            MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in
+klog            ACPI motherboard resources
 klog            
 klog            ADVICE: It appears that PCI config space has been
 klog            configured for a specific device but does not appear to be
 klog            reserved by the ACPI motherboard resources.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.627242] ACPI Error (psargs-0359):
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.627242] ACPI Error (psargs-0359):
 klog            [_SB_.PCI0.EC__.HOTT] Namespace lookup failure,
 klog            AE_NOT_FOUND
 klog            
@@ -8652,35 +8635,35 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.627255] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_TZ_.TZ01._HOT] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.627255] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_TZ_.TZ01._HOT] (Node
 klog            ffff88013ba3ae60), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.628646] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xFA, should be 0x1E
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.628646] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xFA, should be 0x1E (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogFirmwareBugERSTERSTTable: Test 1, HIGH
-klog            Kernel message: [ 0.628687] [Firmware Bug]: ERST: ERST
-klog            table is invalid
+klog            FAILED [HIGH] KlogAcpiErstInvalid: Test 1, HIGH Kernel
+klog            message: [ 0.628687] [Firmware Bug]: ERST: ERST table is
+klog            invalid
 klog            
 klog            ADVICE: The Error Record Serialization Table (ERST) seems
 klog            to be invalid. This normally indicates that the ERST table
 klog            header size is too small, or the table size (excluding
 klog            header) is not a multiple of the ERST entries.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.630258] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.630258] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node ffff88007af370a0)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8688,62 +8671,62 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.641157] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - C4, should be C1
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.641157] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - C4, should be C1 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugPCIMMCONFIGnotReservedIn:
-klog            Test 1, MEDIUM Kernel message: [ 0.644838] [Firmware Bug]:
-klog            PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] not reserved
-klog            in ACPI motherboard resources
+klog            FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
+klog            MEDIUM Kernel message: [ 0.644838] [Firmware Bug]: PCI:
+klog            MMCONFIG at [mem 0xe0000000-0xe09fffff] not reserved in
+klog            ACPI motherboard resources
 klog            
 klog            ADVICE: It appears that PCI config space has been
 klog            configured for a specific device but does not appear to be
 klog            reserved by the ACPI motherboard resources.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.646493] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x5F, should be 0x5A
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.646493] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x5F, should be 0x5A (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.651383] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_._OSC] (Node
-klog            ffff88007f416680), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.651383] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_._OSC] (Node ffff88007f416680)
+klog            , AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.652133] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81a2e040)
-klog            , AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.652133] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node ffffffff81a2e040),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.652695] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81a0f040)
-klog            , AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.652695] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node ffffffff81a0f040),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.653163] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.653163] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node ffff88007ab2f460)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8751,17 +8734,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.653985] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x4A, should be 0x49
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.653985] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x4A, should be 0x49 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.654642] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.654642] ACPI Error: Method parse
 klog            /execution failed [_PR_.CPU1._PDC] (Node ffff88020f44deb0)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8769,8 +8752,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.654994] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.654994] ACPI Error: Method parse
 klog            /execution failed [_PR_.CPU2._PDC] (Node ffff88020f44df50)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8778,8 +8761,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.655350] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.655350] ACPI Error: Method parse
 klog            /execution failed [_PR_.CPU3._PDC] (Node ffff88020f454000)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -8787,161 +8770,158 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.655369] ACPI Error (psargs-0359): [_SB_.PCI0.PSKB]
-klog            Namespace lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.655369] ACPI Error (psargs-0359):
+klog            [_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.655376] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed
-klog            [_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node ffff880236c47260),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.655376] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPC0.SIO_.KBC0._STA]
+klog            (Node ffff880236c47260), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.655576] ACPI Error (psargs-0359): [_SB_.PCI0.PSMS]
-klog            Namespace lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.655576] ACPI Error (psargs-0359):
+klog            [_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.655581] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed
-klog            [_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node ffff880236c47340),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.655581] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPC0.SIO_.MSE0._STA]
+klog            (Node ffff880236c47340), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.656750] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 06, should be 05
-klog            20090521 tbutils-246
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.656750] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 06, should be 05 20090521
+klog            tbutils-246
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 0.658002] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 0.658002] ACPI Warning for
 klog            _SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found
 klog            Integer, expected Buffer (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.658697] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.658697] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff88023fc14aa0), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.662008] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81a0c440)
-klog            , AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.662008] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node ffffffff81a0c440),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugACPInoSecondary: Test 1,
-klog            MEDIUM Kernel message: [ 0.663194] [Firmware Bug]: ACPI:
-klog            no secondary bus range in _CRS
+klog            FAILED [MEDIUM] KlogAcpiCrsSecondaryBusRangeMissing: Test
+klog            1, MEDIUM Kernel message: [ 0.663194] [Firmware Bug]: ACPI
+klog            : no secondary bus range in _CRS
 klog            
 klog            ADVICE: _CRS Method should return a secondary bus address
 klog            for the status/command port. The kernel is having to guess
 klog            this based on the _BBN or assume it's 0x00-0xff.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.664875] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x45, should be 0x44
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.664875] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x45, should be 0x44 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.666686] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x9E, should be 0x9D
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.666686] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x9E, should be 0x9D (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.670109] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 5B, should be 4E
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.670109] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 5B, should be 4E (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.670182] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - C3, should be C2
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.670182] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - C3, should be C2 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.670980] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0x7F
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.670980] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0x7F (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.673104] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 8C, should be 7D
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.673104] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 8C, should be 7D (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.674282] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x15, should be 0x14
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.674282] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x15, should be 0x14 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 0.674920] ACPI Error: [SERN]
-klog            Namespace lookup failure, AE_ALREADY_EXISTS (20110413
-klog            /dswload2-316)
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 0.674920] ACPI Error: [SERN] Namespace
+klog            lookup failure, AE_ALREADY_EXISTS (20110413/dswload2-316)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.674938] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.674938] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node
 klog            f3829120), AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -8949,8 +8929,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.674963] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.674963] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPC_.EC__.BAT1._BIF] (Node
 klog            f3829330), AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -8958,16 +8938,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.675162] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x05, should be 0x04
-klog            (20110413/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.675162] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x05, should be 0x04 (20110413
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
+klog            FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
 klog            HIGH Kernel message: [ 0.677370] ACPI Warning for
 klog            _SB_.PCI0.BAT0._BIF: Converted Buffer to expected String
 klog            at index 9 (20090903/nsrepair-132)
@@ -8977,7 +8957,7 @@ klog            type and ACPI driver automatically converted it to a
 klog            String. It is worth fixing this in the DSDT or SSDT even
 klog            if the kernel fixes it at run time.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningConvertedBufferTo: Test 1,
+klog            FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
 klog            HIGH Kernel message: [ 0.677375] ACPI Warning for
 klog            _SB_.PCI0.BAT0._BIF: Converted Buffer to expected String
 klog            at index 12 (20090903/nsrepair-132)
@@ -8987,88 +8967,88 @@ klog            type and ACPI driver automatically converted it to a
 klog            String. It is worth fixing this in the DSDT or SSDT even
 klog            if the kernel fixes it at run time.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.677386] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 94, should be 93
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.677386] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 94, should be 93 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.678233] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x55, should be 0x50
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.678233] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x55, should be 0x50 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.678877] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 88, should be 7F
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.678877] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 88, should be 7F (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.681297] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - DA, should be D9
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.681297] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - DA, should be D9 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.688066] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 60, should be 5F
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.688066] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 60, should be 5F (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.695029] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81a0e440)
-klog            , AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.695029] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node ffffffff81a0e440),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.695887] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - C1, should be C0
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.695887] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - C1, should be C0 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.696587] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xEE, should be 0xE6
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.696587] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xEE, should be 0xE6 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.697769] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xFC, should be 0xF7
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.697769] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xFC, should be 0xF7 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugPowernowk8NoPSB: Test 1,
+klog            FAILED [MEDIUM] KlogAcpiAmdK8ExpectedPssObjects: Test 1,
 klog            MEDIUM Kernel message: [ 0.700202] [Firmware Bug]:
 klog            powernow-k8: No PSB or ACPI _PSS objects
 klog            
@@ -9083,134 +9063,134 @@ klog            Tell them it is broken with Windows 2000. The reference to
 klog            the AMD documentation is chapter 9 in the BIOS and Kernel
 klog            Developer's Guide, which is available on www.amd.com.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.702121] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x84, should be 0x7B
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.702121] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x84, should be 0x7B (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.705041] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xF3, should be 0xF2
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.705041] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xF3, should be 0xF2 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.710267] ACPI Error: Method parse
-klog            /execution failed [_TZ_.PSWT] (Node f7424bb8),
-klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 0.710267] ACPI Error: Method parse/execution
+klog            failed [_TZ_.PSWT] (Node f7424bb8), AE_AML_PACKAGE_LIMIT
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.710275] ACPI Error: Method parse
-klog            /execution failed [_TZ_.GTTP] (Node f7424b88),
-klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 0.710275] ACPI Error: Method parse/execution
+klog            failed [_TZ_.GTTP] (Node f7424b88), AE_AML_PACKAGE_LIMIT
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.710281] ACPI Error: Method parse
-klog            /execution failed [_TZ_.GFXZ._TMP] (Node f74249a8),
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 0.710281] ACPI Error: Method parse/execution
+klog            failed [_TZ_.GFXZ._TMP] (Node f74249a8),
 klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.710890] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - DF, should be D2
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.710890] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - DF, should be D2 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.712727] ACPI Error: Method parse
-klog            /execution failed [_TZ_.DTSZ._TMP] (Node f7424ca8),
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 0.712727] ACPI Error: Method parse/execution
+klog            failed [_TZ_.DTSZ._TMP] (Node f7424ca8),
 klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.715065] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 67, should be 64
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.715065] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 67, should be 64 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.715951] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x9B, should be 0x93
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.715951] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x9B, should be 0x93 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.717350] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x5C, should be 0x55
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.717350] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x5C, should be 0x55 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.719490] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x3A, should be 0x39
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.719490] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x3A, should be 0x39 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.721822] ACPI Error (dswload-0659): [USB0] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.721822] ACPI Error (dswload-0659): [USB0]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.722199] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81a4d180)
-klog            , AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.722199] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node ffffffff81a4d180),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 0.725417] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 0.725417] ACPI Warning for
 klog            _SB_.PCI0.LPC_.SYSR._CRS: Return type mismatch - found
 klog            Integer, expected Buffer (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.725429] ACPI Error (uteval-0307): Return object type
-klog            is incorrect [_SB_.PCI0.LPC_.SYSR._CRS] (Node
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.725429] ACPI Error (uteval-0307): Return
+klog            object type is incorrect [_SB_.PCI0.LPC_.SYSR._CRS] (Node
 klog            ffff88013ba46cc0), AE_TYPE
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -9218,9 +9198,9 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.725450] ACPI Error: Type returned from _CRS was
-klog            incorrect: Integer, expected Btypes: 4 (20090903
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.725450] ACPI Error: Type returned from _CRS
+klog            was incorrect: Integer, expected Btypes: 4 (20090903
 klog            /uteval-313)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
@@ -9228,16 +9208,16 @@ klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.725974] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x7E, should be 0x75
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.725974] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x7E, should be 0x75 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.736425] ACPI Warning: For
 klog            _SB_.PCI0.PT02._PRT: Return Package has no elements
 klog            (empty) (20110413/nspredef-456)
@@ -9246,26 +9226,25 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.743273] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.743273] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f701f0d8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 0.743525] ACPI Error: [CAPD]
-klog            Namespace lookup failure, AE_ALREADY_EXISTS (20110112
-klog            /dsfield-143)
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 0.743525] ACPI Error: [CAPD] Namespace
+klog            lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.743530] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.743530] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f50273d8),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -9273,8 +9252,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningParameterCountMismatch: Test
-klog            1, HIGH Kernel message: [ 0.743538] ACPI Warning: For
+klog            FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
+klog            HIGH Kernel message: [ 0.743538] ACPI Warning: For
 klog            _SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5,
 klog            ACPI requires 4 (20110112/nspredef-352)
 klog            
@@ -9282,7 +9261,7 @@ klog            ADVICE: The ACPI Method was executing with a different
 klog            number of parameters than the Method expected. This should
 klog            be fixed.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 0.744106] ACPI Error: Field
 klog            [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits)
 klog            (20090903/dsopcode-596)
@@ -9291,33 +9270,33 @@ klog            ADVICE: The field exceeds the allocated buffer size. This
 klog            can lead to unexpected results when fetching data outside
 klog            this region.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.744114] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.MEM_._CRS] (Node
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.744114] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.MEM_._CRS] (Node
 klog            ffff88013ba44cc0), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.744142] ACPI Error (uteval-0250):
-klog            Method execution failed [_SB_.MEM_._CRS] (Node
-klog            ffff88013ba44cc0), AE_AML_BUFFER_LIMIT
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 0.744142] ACPI Error (uteval-0250): Method
+klog            execution failed [_SB_.MEM_._CRS] (Node ffff88013ba44cc0),
+klog            AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.755111] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 2F, should be 2A
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.755111] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 2F, should be 2A (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.772223] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.772223] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f4c250d8),
 klog            AE_ALREADY_EXISTS (20101013/psparse-537)
 klog            
@@ -9325,107 +9304,107 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.775831] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0x87
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.775831] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0x87 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.777581] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xF9, should be 0xF8
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.777581] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xF9, should be 0xF8 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.779737] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x83, should be 0x82
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.779737] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x83, should be 0x82 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.780967] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - FA, should be F9
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.780967] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - FA, should be F9 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.781225] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x10, should be 0x0F
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.781225] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x10, should be 0x0F (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.781345] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xB2, should be 0xB1
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.781345] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xB2, should be 0xB1 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.782613] ACPI Error (psargs-0359): [RAMB] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.782613] ACPI Error (psargs-0359): [RAMB]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.783246] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x7D, should be 0x7C
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.783246] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x7D, should be 0x7C (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.786539] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x2D, should be 0x2C
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.786539] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x2D, should be 0x2C (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.787253] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x10, should be 0x0F
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.787253] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x10, should be 0x0F (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.788032] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x04, should be 0x03
-klog            (20110413/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.788032] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x04, should be 0x03 (20110413
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorSBOSCAEAMLBUFFERLIMIT: Test
-klog            1, CRITICAL Kernel message: [ 0.788418] ACPI Error
+klog            FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1,
+klog            CRITICAL Kernel message: [ 0.788418] ACPI Error
 klog            (psparse-0537): Method parse/execution failed [_SB_._OSC]
 klog            (Node ffff88030a048b40), AE_AML_BUFFER_LIMIT
 klog            
@@ -9435,17 +9414,17 @@ klog            an 8 byte buffer of 2 x 32 DWORDs, however it appears that
 klog            the method is possibly trying to access data outside this
 klog            buffer. This is a bug in the _OSC method.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.788607] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xA2, should be 0xA1
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.788607] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xA2, should be 0xA1 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.790513] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.790513] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node
 klog            ffff880079f39f78), AE_ALREADY_EXISTS (20110112
 klog            /psparse-536)
@@ -9454,8 +9433,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.790526] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.790526] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPC_.EC__.BAT0._BIF] (Node
 klog            ffff880079f37118), AE_ALREADY_EXISTS (20110112
 klog            /psparse-536)
@@ -9464,42 +9443,42 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.791560] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.791560] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0x3F, should be 0x1F (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 0.794367] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 0.794367] ACPI Warning for
 klog            _PR_.P002._PSD: Return type mismatch - found Integer,
 klog            expected Package (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.795423] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.795423] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0x3F, should be 0x1F (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.805111] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 00, should be 7E
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.805111] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 00, should be 7E (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 0.810246] [Firmware Bug]: ACPI(Z01I) defines
 klog            _DOD but not _DOS
 klog            
@@ -9508,70 +9487,70 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.810687] ACPI Error (dswload-0659): [DD02] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.810687] ACPI Error (dswload-0659): [DD02]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.810756] ACPI Error (dswload-0659): [EHC1] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.810756] ACPI Error (dswload-0659): [EHC1]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.820565] ACPI Error: [FZHD] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.820565] ACPI Error: [FZHD] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.820571] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
-klog            ffff880127632b40), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.820571] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SATA.CHN0._GTM] (Node ffff880127632b40),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.820632] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
-klog            ffff880127632cd0), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.820632] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SATA.CHN1._GTM] (Node ffff880127632cd0),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.821065] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
-klog            ffff880127634758), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.821065] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node ffff880127634758),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.821112] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
-klog            ffff8801276348e8), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.821112] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node ffff8801276348e8),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.822836] ACPI Warning: For
 klog            _SB_.PCI0.PCI2._PRT: Return Package has no elements
 klog            (empty) (20110112/nspredef-456)
@@ -9580,79 +9559,79 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.831199] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - B7, should be B6
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.831199] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - B7, should be B6 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.860349] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.PPCE] (Node
-klog            ffff88023704ea40), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.860349] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.PPCE] (Node ffff88023704ea40)
+klog            , AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.860380] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [EV4_] (Node
-klog            ffff8802370590e0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.860380] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [EV4_] (Node ffff8802370590e0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.860410] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SMIE] (Node
-klog            ffff8802370522a0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.860410] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [SMIE] (Node ffff8802370522a0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.860439] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [NEVT] (Node
-klog            ffff880237052240), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.860439] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [NEVT] (Node ffff880237052240),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.860468] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
-klog            (Node ffff880237050de0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.860468] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
+klog            ffff880237050de0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.870147] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.870147] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            ffff88013ba29e80), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.872036] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - EC, should be E3
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.872036] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - EC, should be E3 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.873454] ACPI Warning for
 klog            _SB_.PCI0.PCIB._PRT: Return Package has no elements
 klog            (empty) (20090903/nspredef-433)
@@ -9661,43 +9640,43 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.875591] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 14, should be 13
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.875591] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 14, should be 13 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.877093] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x89, should be 0x80
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.877093] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x89, should be 0x80 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 0.879606] ACPI Error (psargs-0359): [MPEN] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 0.879606] ACPI Error (psargs-0359): [MPEN]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.879794] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_TZ_.TZ00._PSL] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.879794] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_TZ_.TZ00._PSL] (Node
 klog            ffff88015ba4de00), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 0.888177] ACPI Warning for
 klog            _SB_.BAT1._BST: Return Package type mismatch at index 2 -
 klog            found [NULL Object Descriptor], expected Integer (20090903
@@ -9707,7 +9686,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.890080] ACPI Error: No handler for
 klog            Region [RAM_] (ffff880133a35a20) [EmbeddedControl]
 klog            (20100428/evregion-369)
@@ -9716,257 +9695,257 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
-klog            message: [ 0.890253] ACPI Error: Region
+klog            FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
+klog            Kernel message: [ 0.890253] ACPI Error: Region
 klog            EmbeddedControl(0x3) has no handler (20100428/exfldio-293)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.890421] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.890421] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
 klog            (Node ffff880133a49620), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.890696] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 0.890696] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
 klog            (Node ffff880133a385e0), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.892097] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.PPCE] (Node
-klog            ffff88021704e920), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.892097] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.PPCE] (Node ffff88021704e920)
+klog            , AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.892124] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [EV4_] (Node
-klog            ffff880217056700), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.892124] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [EV4_] (Node ffff880217056700),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.892147] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SMIE] (Node
-klog            ffff880217052180), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.892147] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [SMIE] (Node ffff880217052180),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.892171] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [NEVT] (Node
-klog            ffff880217052120), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.892171] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [NEVT] (Node ffff880217052120),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.892195] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
-klog            (Node ffff880217050cc0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.892195] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
+klog            ffff880217050cc0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.892915] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xCE, should be 0xCD
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.892915] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xCE, should be 0xCD (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.899338] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0xDD, should be 0xD4
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.899338] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0xDD, should be 0xD4 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.900692] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.PPCE] (Node
-klog            ffff88021704e960), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.900692] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.PPCE] (Node ffff88021704e960)
+klog            , AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.900729] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [EV4_] (Node
-klog            ffff880217059000), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.900729] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [EV4_] (Node ffff880217059000),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.900753] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SMIE] (Node
-klog            ffff8802170521c0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.900753] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [SMIE] (Node ffff8802170521c0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.900776] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [NEVT] (Node
-klog            ffff880217052160), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.900776] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [NEVT] (Node ffff880217052160),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.900801] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
-klog            (Node ffff880217050d00), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.900801] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
+klog            ffff880217050d00), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.905032] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.PPCE] (Node
-klog            ffff88021304e940), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.905032] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.PPCE] (Node ffff88021304e940)
+klog            , AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.905061] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [EV4_] (Node
-klog            ffff8802130576a0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.905061] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [EV4_] (Node ffff8802130576a0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.905085] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SMIE] (Node
-klog            ffff8802130521a0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.905085] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [SMIE] (Node ffff8802130521a0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.905110] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [NEVT] (Node
-klog            ffff880213052140), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.905110] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [NEVT] (Node ffff880213052140),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.905135] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
-klog            (Node ffff880213050ce0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.905135] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
+klog            ffff880213050ce0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.905920] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.C000.C264] (Node
-klog            f7024e58), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 0.905920] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.C000.C264] (Node f7024e58),
+klog            AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.905985] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.C000._PSS] (Node
-klog            f7024f30), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 0.905985] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.C000._PSS] (Node f7024f30),
+klog            AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogFirmwareBugBIOSNeeds: Test 1, HIGH
-klog            Kernel message: [ 0.906063] [Firmware Bug]: BIOS needs
-klog            update for CPU frequency support
+klog            FAILED [HIGH] KlogAcpiMissingPssPct: Test 1, HIGH Kernel
+klog            message: [ 0.906063] [Firmware Bug]: BIOS needs update for
+klog            CPU frequency support
 klog            
 klog            ADVICE: Having _PPC but missing frequencies (_PSS, _PCT)
 klog            is a good hint that the BIOS is older than the CPU and
 klog            does not know the CPU frequencies.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.940265] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x14, should be 0x13
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.940265] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x14, should be 0x13 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.940948] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 0.940948] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f7421fc0), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.941821] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0x3F, should be 0x91
-klog            (20110413/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.941821] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0x3F, should be 0x91 (20110413
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.943511] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0x7E
-klog            (20110413/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.943511] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0x7E (20110413
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.944156] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.ACAD._PSR]
-klog            (Node ffff88013384d720), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.944156] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.ACAD._PSR] (Node
+klog            ffff88013384d720), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 0.967528] ACPI Warning for
 klog            _TZ_.THRM._AL0: Return Package has no elements (empty)
 klog            (20100428/nspredef-456)
@@ -9975,119 +9954,121 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 0.972652] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - FA, should be F7
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 0.972652] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - FA, should be F7 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 0.990917] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 0.990917] ACPI Warning for
 klog            _SB_.PCI0.FNC2.PRT0._GTF: Return type mismatch - found
 klog            Integer, expected Buffer (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 0.991675] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 0.991675] ACPI Warning for
 klog            _SB_.PCI0.FNC2.PRT1._GTF: Return type mismatch - found
 klog            Integer, expected Buffer (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 0.992685] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81cf6eb0)
-klog            , AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 0.992685] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node ffffffff81cf6eb0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.004972] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [CPUT] (Node f701c150),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.004972] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [CPUT] (Node f701c150),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.005015] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PSSC] (Node f701c168),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.005015] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [PSSC] (Node f701c168),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.005055] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
-klog            (Node f702f3c0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.005055] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
+klog            f702f3c0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.005834] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x1D, should be 0x1C
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.005834] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x1D, should be 0x1C (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.009421] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.ACAD._PSR]
-klog            (Node f701aa98), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.009421] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.ACAD._PSR] (Node
+klog            f701aa98), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.020525] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xE8, should be 0xE7
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.020525] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xE8, should be 0xE7 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 1.020868] ACPI Warning for _PR_.CPU0._PSD: Incorrectly
-klog            formed Package, attempting repair (20090903/nsrepair-200)
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 1.020868] ACPI Warning for _PR_.CPU0._PSD:
+klog            Incorrectly formed Package, attempting repair (20090903
+klog            /nsrepair-200)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 1.021557] ACPI Warning for _PR_.CPU1._PSD: Incorrectly
-klog            formed Package, attempting repair (20090903/nsrepair-200)
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 1.021557] ACPI Warning for _PR_.CPU1._PSD:
+klog            Incorrectly formed Package, attempting repair (20090903
+klog            /nsrepair-200)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.023813] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x82, should be 0x81
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.023813] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x82, should be 0x81 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningInvalidThrottlingState: Test
-klog            1, HIGH Kernel message: [ 1.026272] ACPI Warning
+klog            FAILED [HIGH] KlogAcpiInvalidThrottlingState: Test 1, HIGH
+klog            Kernel message: [ 1.026272] ACPI Warning
 klog            (processor_throttling-0843): Invalid throttling state,
 klog            reset
 klog            
@@ -10095,7 +10076,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 1.027573] ACPI Error: No handler for
 klog            Region [ERAM] (ffff880133e3e798) [EmbeddedControl]
 klog            (20090903/evregion-319)
@@ -10104,17 +10085,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.027587] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.DOCK._STA]
-klog            (Node ffff880133e48620), AE_NOT_EXIST
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 1.027587] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.DOCK._STA] (Node
+klog            ffff880133e48620), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.027653] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 1.027653] ACPI Error (uteval-0250):
 klog            Method execution failed [_SB_.PCI0.DOCK._STA] (Node
 klog            ffff880133e48620), AE_NOT_EXIST
 klog            
@@ -10122,59 +10103,59 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [CRITICAL] KlogFirmwareBugNoValidTrip: Test 1,
-klog            CRITICAL Kernel message: [ 1.125427] [Firmware Bug]: No
-klog            valid trip found
+klog            FAILED [CRITICAL] KlogAcpiNoValidCrt: Test 1, CRITICAL
+klog            Kernel message: [ 1.125427] [Firmware Bug]: No valid trip
+klog            found
 klog            
-klog            ADVICE: No valud ACPI _CRT (Critical Trip Point) was
+klog            ADVICE: No valid ACPI _CRT (Critical Trip Point) was
 klog            found.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.158298] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_._OSC] (Node
-klog            f701b648), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.158298] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_._OSC] (Node f701b648),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 1.167050] ACPI Error: [CDW1] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110316/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 1.167050] ACPI Error: [CDW1] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110316/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.167226] ACPI Error: Method parse
-klog            /execution failed [_SB_._OSC] (Node f4422648),
-klog            AE_NOT_FOUND (20110316/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.167226] ACPI Error: Method parse/execution
+klog            failed [_SB_._OSC] (Node f4422648), AE_NOT_FOUND (20110316
+klog            /psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.168945] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x04, should be 0xFD
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.168945] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x04, should be 0xFD (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.174038] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0x00, should be 0x9B
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.174038] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0x00, should be 0x9B (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugPowernowk8NoPSB: Test 1,
+klog            FAILED [MEDIUM] KlogAcpiAmdK8ExpectedPssObjects: Test 1,
 klog            MEDIUM Kernel message: [ 1.176461] [Firmware Bug]:
 klog            powernow-k8: No compatible ACPI _PSS objects found.
 klog            
@@ -10189,24 +10170,24 @@ klog            Tell them it is broken with Windows 2000. The reference to
 klog            the AMD documentation is chapter 9 in the BIOS and Kernel
 klog            Developer's Guide, which is available on www.amd.com.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugPowernowk8TryAgain: Test 1,
-klog            MEDIUM Kernel message: [ 1.176462] [Firmware Bug]:
-klog            powernow-k8: Try again with latest BIOS.
+klog            FAILED [MEDIUM] KlogAcpiTryNewAmdFirmware: Test 1, MEDIUM
+klog            Kernel message: [ 1.176462] [Firmware Bug]: powernow-k8:
+klog            Try again with latest BIOS.
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.179893] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x81, should be 0x59
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.179893] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x81, should be 0x59 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 1.183989] [Firmware Bug]: ACPI(PEGD) defines
 klog            _DOD but not _DOS
 klog            
@@ -10215,7 +10196,7 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 1.184923] ACPI Warning: For
 klog            _SB_.PCI0.P0P1._PRT: Return Package has no elements
 klog            (empty) (20110413/nspredef-456)
@@ -10224,79 +10205,79 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 1.186079] ACPI Error: [BRTW] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 1.186079] ACPI Error: [BRTW] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.186087] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node
-klog            f4c2a588), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.186087] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0.DD03._BCM] (Node f4c2a588),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.187842] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0.PPC_] (Node
-klog            f7450168), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.187842] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU0.PPC_] (Node f7450168),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.187891] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0._PPC] (Node
-klog            f74500c0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.187891] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU0._PPC] (Node f74500c0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.188370] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PPC] (Node
-klog            f7450150), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.188370] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU1._PPC] (Node f7450150),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.188776] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU2._PPC] (Node
-klog            f74502b8), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.188776] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU2._PPC] (Node f74502b8),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.189190] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU3._PPC] (Node
-klog            f7450258), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.189190] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU3._PPC] (Node f7450258),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.196055] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0._OSC] (Node f3824270),
-klog            AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.196055] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0._OSC] (Node f3824270), AE_NOT_FOUND
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 1.210593] ACPI Warning: For
 klog            _SB_.PCI0.PCIB._PRT: Return Package has no elements
 klog            (empty) (20101013/nspredef-456)
@@ -10305,7 +10286,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 1.212692] ACPI Warning: For
 klog            _TZ_.THRM._AL0: Return Package has no elements (empty)
 klog            (20110112/nspredef-456)
@@ -10314,17 +10295,16 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 1.214748] ACPI Error: [_T_1]
-klog            Namespace lookup failure, AE_ALREADY_EXISTS (20110112
-klog            /dswload-802)
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 1.214748] ACPI Error: [_T_1] Namespace
+klog            lookup failure, AE_ALREADY_EXISTS (20110112/dswload-802)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.214761] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 1.214761] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node
 klog            f3023438), AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -10332,8 +10312,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.214775] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 1.214775] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node
 klog            f3023420), AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -10341,8 +10321,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.222641] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 1.222641] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node
 klog            f30235b8), AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -10350,8 +10330,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.222655] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 1.222655] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node
 klog            f30235a0), AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -10359,66 +10339,66 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.224060] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.BAT1._STA] (Node
-klog            f7023b10), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 1.224060] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.BAT1._STA] (Node f7023b10),
+klog            AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.228128] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
-klog            (Node f702a570), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.228128] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
+klog            f702a570), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.229185] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 1.229185] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0._OSC] (Node
 klog            f70140d8), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 1.230869] ACPI Warning for _PR_.CPU0._PSS:
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 1.230869] ACPI Warning for _PR_.CPU0._PSS:
 klog            SubPackage[15,16] - suspicious power dissipation values
 klog            (20100428/nsrepair2-403)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 1.231049] ACPI Warning for _PR_.CPU1._PSS:
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 1.231049] ACPI Warning for _PR_.CPU1._PSS:
 klog            SubPackage[15,16] - suspicious power dissipation values
 klog            (20100428/nsrepair2-403)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 1.231224] ACPI Warning for _PR_.CPU2._PSS:
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 1.231224] ACPI Warning for _PR_.CPU2._PSS:
 klog            SubPackage[15,16] - suspicious power dissipation values
 klog            (20100428/nsrepair2-403)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 1.231399] ACPI Warning for _PR_.CPU3._PSS:
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 1.231399] ACPI Warning for _PR_.CPU3._PSS:
 klog            SubPackage[15,16] - suspicious power dissipation values
 klog            (20100428/nsrepair2-403)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 1.246159] ACPI Error: No handler for
 klog            Region [ECRM] (f6cedba0) [EmbeddedControl] (20110413
 klog            /evregion-373)
@@ -10427,16 +10407,17 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
-klog            message: [ 1.246164] ACPI Error: Region EmbeddedControl
-klog            (ID=3) has no handler (20110413/exfldio-292)
+klog            FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
+klog            Kernel message: [ 1.246164] ACPI Error: Region
+klog            EmbeddedControl (ID=3) has no handler (20110413
+klog            /exfldio-292)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.246169] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 1.246169] ACPI Error: Method parse
 klog            /execution failed [_TZ_.RDEC] (Node f442fc60),
 klog            AE_NOT_EXIST (20110413/psparse-536)
 klog            
@@ -10444,8 +10425,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.246176] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 1.246176] ACPI Error: Method parse
 klog            /execution failed [_TZ_.TZS0._TMP] (Node f442fca8),
 klog            AE_NOT_EXIST (20110413/psparse-536)
 klog            
@@ -10453,34 +10434,34 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.270260] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [CPUT] (Node
-klog            ffff880137a4e840), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.270260] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [CPUT] (Node ffff880137a4e840),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.270297] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PSSC] (Node
-klog            ffff880137a4e860), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.270297] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [PSSC] (Node ffff880137a4e860),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.270332] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
-klog            (Node ffff880137a3fd00), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.270332] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
+klog            ffff880137a3fd00), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 1.272398] ACPI Error: No handler for
 klog            Region [ECRM] (f76d0c60) [EmbeddedControl] (20110112
 klog            /evregion-369)
@@ -10489,8 +10470,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.272407] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 1.272407] ACPI Error: Method parse
 klog            /execution failed [_TZ_.RDEC] (Node f742fc60),
 klog            AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -10498,8 +10479,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.272415] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 1.272415] ACPI Error: Method parse
 klog            /execution failed [_TZ_.TZS0._TMP] (Node f742fca8),
 klog            AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -10507,7 +10488,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 1.280955] ACPI Error: No handler for
 klog            Region [PCFG] (ffff880137a733f0) [PCI_Config] (20090903
 klog            /evregion-319)
@@ -10516,44 +10497,44 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.280965] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [J380._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 1.280965] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [J380._STA] (Node
 klog            ffff88013712b380), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 1.314561] ACPI Error: [ECPU] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 1.314561] ACPI Error: [ECPU] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.314567] ACPI Error: Method parse
-klog            /execution failed [_TZ_.TZ00._TMP] (Node ffff88011763ca28)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.314567] ACPI Error: Method parse/execution
+klog            failed [_TZ_.TZ00._TMP] (Node ffff88011763ca28),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.320114] ACPI Warning:
-klog            Incorrect checksum in table [ATKG] - 0x9D, should be 0xE5
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.320114] ACPI Warning: Incorrect
+klog            checksum in table [ATKG] - 0x9D, should be 0xE5 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorSBOSCAEAMLBUFFERLIMIT: Test
-klog            1, CRITICAL Kernel message: [ 1.336148] ACPI Error
+klog            FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1,
+klog            CRITICAL Kernel message: [ 1.336148] ACPI Error
 klog            (psparse-0537): Method parse/execution failed [_SB_._OSC]
 klog            (Node ffff88012b647200), AE_AML_BUFFER_LIMIT
 klog            
@@ -10563,8 +10544,8 @@ klog            an 8 byte buffer of 2 x 32 DWORDs, however it appears that
 klog            the method is possibly trying to access data outside this
 klog            buffer. This is a bug in the _OSC method.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.337975] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 1.337975] ACPI Error (uteval-0250):
 klog            Method execution failed [J380._STA] (Node
 klog            ffff88013712b380), AE_NOT_EXIST
 klog            
@@ -10572,7 +10553,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 1.371174] ACPI Error: Field
 klog            [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits)
 klog            (20090903/dsopcode-596)
@@ -10581,8 +10562,8 @@ klog            ADVICE: The field exceeds the allocated buffer size. This
 klog            can lead to unexpected results when fetching data outside
 klog            this region.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorSBOSCAEAMLBUFFERLIMIT: Test
-klog            1, CRITICAL Kernel message: [ 1.371180] ACPI Error
+klog            FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1,
+klog            CRITICAL Kernel message: [ 1.371180] ACPI Error
 klog            (psparse-0537): Method parse/execution failed [_SB_._OSC]
 klog            (Node ffff88044b85e4a0), AE_AML_BUFFER_LIMIT
 klog            
@@ -10592,51 +10573,51 @@ klog            an 8 byte buffer of 2 x 32 DWORDs, however it appears that
 klog            the method is possibly trying to access data outside this
 klog            buffer. This is a bug in the _OSC method.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.381411] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [] (Node ffffffff81a2b040)
-klog            , AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.381411] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [] (Node ffffffff81a2b040),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 1.381481] ACPI Error (dswload-0659): [PCI0] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 1.381481] ACPI Error (dswload-0659): [PCI0]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 1.384655] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 1.384655] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff8801393f91f8
 klog            (20090903/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.384672] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.VGA_._DSM]
-klog            (Node ffff88013ba4c020), AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 1.384672] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node
+klog            ffff88013ba4c020), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.384743] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM]
-klog            (Node ffff88013ba4d9c0), AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 1.384743] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
+klog            ffff88013ba4d9c0), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines
 klog            _DOD but not _DOS
 klog            
@@ -10645,7 +10626,7 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 1.398053] ACPI: acpi_idle yielding
 klog            to intel_idleACPI Warning for _TZ_.TZ01._PSL: Return
 klog            Package type mismatch at index 0 - found Processor,
@@ -10655,7 +10636,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 1.399160] ACPI Warning for
 klog            _SB_.PCI0.PT02._PRT: Return Package has no elements
 klog            (empty) (20090903/nspredef-433)
@@ -10664,25 +10645,25 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.400736] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
-klog            (Node f7018e58), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.400736] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
+klog            f7018e58), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.436671] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
-klog            (Node f7024e58), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.436671] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
+klog            f7024e58), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 1.462866] ACPI Warning:
 klog            _SB_.PCI0.VID2._DOD: Return Package has no elements
 klog            (empty) 20090521 nspredef-434
@@ -10691,167 +10672,167 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 1.480960] ACPI Warning:
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 1.480960] ACPI Warning:
 klog            _SB_.PCI0.FNC2.PRT0._GTF: Return type mismatch - found
 klog            Integer, expected Buffer 20090521 nspredef-940
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 1.488986] ACPI Error (psargs-0359): [GTF0] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 1.488986] ACPI Error (psargs-0359): [GTF0]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.488991] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._SDD]
-klog            (Node f702b708), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.488991] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
+klog            f702b708), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.489034] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF]
-klog            (Node f702b720), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.489034] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
+klog            f702b720), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.505441] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 7C, should be 7B
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.505441] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 7C, should be 7B (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.507734] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 2D, should be 2C
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.507734] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 2D, should be 2C (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.509153] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - C0, should be BF
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.509153] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - C0, should be BF (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.512057] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - CA, should be C9
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.512057] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - CA, should be C9 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.515657] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xC5, should be 0xC4
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.515657] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xC5, should be 0xC4 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 1.518091] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 1.518091] ACPI Warning for
 klog            _SB_.PCI0.IDE1.PRT0._GTF: Return type mismatch - found
 klog            Integer, expected Buffer (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.528248] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x98, should be 0x97
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.528248] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x98, should be 0x97 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.529653] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0x7C, should be 0x7B
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.529653] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0x7C, should be 0x7B (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.535278] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 00, should be 88
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.535278] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 00, should be 88 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.545790] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - D0, should be CF
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.545790] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - D0, should be CF (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.555599] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [CPUT] (Node
-klog            ffff8801b90590c0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.555599] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [CPUT] (Node ffff8801b90590c0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.555652] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PSSC] (Node
-klog            ffff8801b90590e0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.555652] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [PSSC] (Node ffff8801b90590e0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.555703] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
-klog            (Node ffff8801b903b6e0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.555703] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
+klog            ffff8801b903b6e0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.559068] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - C5, should be C4
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.559068] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - C5, should be C4 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 1.570612] ACPI Error: No handler for
 klog            Region [PCFG] (ffff8801b9074240) [PCI_Config] (20090903
 klog            /evregion-319)
@@ -10860,25 +10841,25 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.570624] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [J380._STA] (Node
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 1.570624] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [J380._STA] (Node
 klog            ffff8801b916ea40), AE_NOT_EXIST
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.586563] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - D7, should be D3
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.586563] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - D7, should be D3 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 1.590337] ACPI Warning: For
 klog            _TZ_.THRM._PSL: Return Package has no elements (empty)
 klog            (20110112/nspredef-456)
@@ -10887,96 +10868,97 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.601784] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 5D, should be 55
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.601784] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 5D, should be 55 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorCurrentBrightnessInvalid: Test
-klog            1, HIGH Kernel message: [ 1.605121] ACPI Error: Current
-klog            brightness invalid (20110112/video-377)
+klog            FAILED [HIGH] KlogAcpiInvalidBrightness: Test 1, HIGH
+klog            Kernel message: [ 1.605121] ACPI Error: Current brightness
+klog            invalid (20110112/video-377)
 klog            
-klog            ADVICE: ACPI video driver has encountered a brightness
-klog            level that is outside the expected range.
+klog            ADVICE: The ACPI video driver set the brightness level
+klog            using the ACPI control _BCM, however the level used was
+klog            not a known level (as returned by _BCL).
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 1.605465] ACPI Error: [RAMB] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 1.605465] ACPI Error: [RAMB] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.616034] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0.PPC_] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.616034] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU0.PPC_] (Node
 klog            ffff88015334da00), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.616243] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.616243] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU0._PPC] (Node
 klog            ffff88015334d920), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.618281] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.618281] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU1._PPC] (Node
 klog            ffff88015334d9e0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.620164] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU2._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.620164] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU2._PPC] (Node
 klog            ffff88015334dbc0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.621081] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU3._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.621081] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU3._PPC] (Node
 klog            ffff88015334db40), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 1.648580] ACPI Error: [SMS_] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 1.648580] ACPI Error: [SMS_] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.648589] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
-klog            f3429e58), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.648589] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SATA.PRT0._SDD] (Node f3429e58),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.662849] ACPI Error (uteval-0250):
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 1.662849] ACPI Error (uteval-0250):
 klog            Method execution failed [J380._STA] (Node
 klog            ffff8801b916ea40), AE_NOT_EXIST
 klog            
@@ -10984,151 +10966,149 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 1.678325] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 1.678325] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88022f7bb5e8
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.678342] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.VGA_._DSM] (Node
-klog            ffff88022f460190), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 1.678342] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.VGA_._DSM] (Node ffff88022f460190),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 1.678390] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 1.678390] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88022f7bb8b8
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.678412] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
-klog            ffff88022f464230), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 1.678412] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88022f464230),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.701482] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.PPCE] (Node
-klog            ffff88022704e960), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.701482] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.PPCE] (Node ffff88022704e960)
+klog            , AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.701521] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [EV4_] (Node
-klog            ffff880227059000), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.701521] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [EV4_] (Node ffff880227059000),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.701557] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SMIE] (Node
-klog            ffff8802270521c0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.701557] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [SMIE] (Node ffff8802270521c0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.701592] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [NEVT] (Node
-klog            ffff880227052160), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.701592] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [NEVT] (Node ffff880227052160),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.701628] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
-klog            (Node ffff880227050d00), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.701628] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
+klog            ffff880227050d00), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 1.739479] ACPI Warning:
-klog            Incorrect checksum in table [SSDT] - 0x3F, should be 0x91
-klog            (20110112/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 1.739479] ACPI Warning: Incorrect
+klog            checksum in table [SSDT] - 0x3F, should be 0x91 (20110112
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.761428] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
-klog            (Node ffff8800bc234d60), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.761428] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
+klog            ffff8800bc234d60), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.782803] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0.PPC_] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.782803] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU0.PPC_] (Node
 klog            ffff8801d4d0ac60), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.783001] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.783001] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU0._PPC] (Node
 klog            ffff8801d4d0ab80), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.784831] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.784831] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU1._PPC] (Node
 klog            ffff8801d4d0ac40), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.786497] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU2._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.786497] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU2._PPC] (Node
 klog            ffff8801d4d0ae20), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.787299] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU3._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.787299] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU3._PPC] (Node
 klog            ffff8801d4d0ada0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 1.849787] ACPI Warning for
 klog            _PR_.CPU3._PSD: Return Package type mismatch at index 4 -
 klog            found [NULL Object Descriptor], expected Integer
@@ -11138,17 +11118,16 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 1.861558] ACPI Error: [SERN]
-klog            Namespace lookup failure, AE_ALREADY_EXISTS (20110112
-klog            /dswload-802)
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 1.861558] ACPI Error: [SERN] Namespace
+klog            lookup failure, AE_ALREADY_EXISTS (20110112/dswload-802)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.861576] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 1.861576] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node
 klog            ffff880232c509b0), AE_ALREADY_EXISTS (20110112
 klog            /psparse-536)
@@ -11157,8 +11136,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.861601] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 1.861601] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPC_.EC__.BAT1._BIF] (Node
 klog            ffff880232c50d20), AE_ALREADY_EXISTS (20110112
 klog            /psparse-536)
@@ -11167,97 +11146,97 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.864413] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DOD] (Node f3025828),
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 1.864413] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DOD] (Node f3025828),
 klog            AE_AML_PACKAGE_LIMIT (20110413/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.893953] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [CPUT] (Node
-klog            ffff8800b3c50000), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.893953] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [CPUT] (Node ffff8800b3c50000),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.894002] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PSSC] (Node
-klog            ffff8800b3c50020), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.894002] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [PSSC] (Node ffff8800b3c50020),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.894047] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
-klog            (Node ffff8800b3c49380), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.894047] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
+klog            ffff8800b3c49380), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 1.900224] ACPI Error: [NPSS] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 1.900224] ACPI Error: [NPSS] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.900238] ACPI Error: Method parse
-klog            /execution failed [_PR_.CPU0.PPC_] (Node ffff88014f9a5140)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.900238] ACPI Error: Method parse/execution
+klog            failed [_PR_.CPU0.PPC_] (Node ffff88014f9a5140),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.900254] ACPI Error: Method parse
-klog            /execution failed [_PR_.CPU0._PPC] (Node ffff88014f9a5028)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.900254] ACPI Error: Method parse/execution
+klog            failed [_PR_.CPU0._PPC] (Node ffff88014f9a5028),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.900769] ACPI Error: Method parse
-klog            /execution failed [_PR_.CPU1._PPC] (Node ffff88014f9a5118)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.900769] ACPI Error: Method parse/execution
+klog            failed [_PR_.CPU1._PPC] (Node ffff88014f9a5118),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.901001] ACPI Error: Method parse
-klog            /execution failed [_PR_.CPU2._PPC] (Node ffff88014f9a5370)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.901001] ACPI Error: Method parse/execution
+klog            failed [_PR_.CPU2._PPC] (Node ffff88014f9a5370),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.901211] ACPI Error: Method parse
-klog            /execution failed [_PR_.CPU3._PPC] (Node ffff88014f9a52d0)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.901211] ACPI Error: Method parse/execution
+klog            failed [_PR_.CPU3._PPC] (Node ffff88014f9a52d0),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 1.905440] ACPI Warning: For
 klog            _SB_.PCI0.PCIB._PRT: Return Package has no elements
 klog            (empty) (20110112/nspredef-456)
@@ -11266,34 +11245,34 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 1.907422] ACPI Error: [GTF0] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 1.907422] ACPI Error: [GTF0] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.907427] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
-klog            f3431a50), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.907427] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3431a50),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.907445] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
-klog            f3431a68), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.907445] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3431a68),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 1.911273] ACPI Warning for
 klog            _SB_.PCI0.P0P1._PRT: Return Package has no elements
 klog            (empty) (20090903/nspredef-433)
@@ -11302,31 +11281,31 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.929855] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.IDE1.GTM_]
-klog            (Node f7414858), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 1.929855] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.IDE1.GTM_] (Node
+klog            f7414858), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.929872] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM]
-klog            (Node f7414798), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 1.929872] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM] (Node
+klog            f7414798), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 1.958776] ACPI Warning for _PR_.CPU0._PSD:
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 1.958776] ACPI Warning for _PR_.CPU0._PSD:
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 1.958968] ACPI Warning for
 klog            _PR_.CPU1._PSD: Return Package type mismatch at index 4 -
 klog            found [NULL Object Descriptor], expected Integer (20090903
@@ -11336,7 +11315,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 1.959113] ACPI Warning for
 klog            _PR_.CPU2._PSD: Return Package type mismatch at index 4 -
 klog            found [NULL Object Descriptor], expected Integer (20090903
@@ -11346,7 +11325,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 1.959252] ACPI Warning for
 klog            _PR_.CPU3._PSD: Return Package type mismatch at index 4 -
 klog            found [NULL Object Descriptor], expected Integer (20090903
@@ -11356,7 +11335,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 1.959427] ACPI Warning for
 klog            _PR_.CPU4._PSD: Return Package type mismatch at index 4 -
 klog            found [NULL Object Descriptor], expected Integer (20090903
@@ -11366,7 +11345,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 1.959602] ACPI Warning for
 klog            _PR_.CPU5._PSD: Return Package type mismatch at index 4 -
 klog            found [NULL Object Descriptor], expected Integer (20090903
@@ -11376,7 +11355,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 1.959776] ACPI Warning for
 klog            _PR_.CPU6._PSD: Return Package type mismatch at index 4 -
 klog            found [NULL Object Descriptor], expected Integer (20090903
@@ -11386,7 +11365,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 1.959951] ACPI Warning for
 klog            _PR_.CPU7._PSD: Return Package type mismatch at index 4 -
 klog            found [NULL Object Descriptor], expected Integer (20090903
@@ -11396,124 +11375,124 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.962612] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0.PPC_] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.962612] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU0.PPC_] (Node
 klog            ffff8801534e5dc0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.962811] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.962811] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU0._PPC] (Node
 klog            ffff8801534e5ce0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.964620] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.964620] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU1._PPC] (Node
 klog            ffff8801534e5da0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.966282] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU2._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.966282] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU2._PPC] (Node
 klog            ffff8801534e5f80), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.967081] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU3._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.967081] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU3._PPC] (Node
 klog            ffff8801534e5f00), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.974827] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
-klog            f3831a50), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.974827] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3831a50),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 1.974846] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
-klog            f3831a68), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 1.974846] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3831a68),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.001829] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.PATA.GTM_] (Node f5423ba0),
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 2.001829] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.PATA.GTM_] (Node f5423ba0),
 klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.001850] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.PATA.CHN0._GTM] (Node
-klog            f54239c0), AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 2.001850] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.PATA.CHN0._GTM] (Node f54239c0),
+klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.002809] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.PATA.CHN1._GTM] (Node
-klog            f5423ac8), AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 2.002809] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.PATA.CHN1._GTM] (Node f5423ac8),
+klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.006621] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [CPUT] (Node
-klog            ffff8801b90570c0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.006621] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [CPUT] (Node ffff8801b90570c0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.006671] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [PSSC] (Node
-klog            ffff8801b90570e0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.006671] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [PSSC] (Node ffff8801b90570e0),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.006718] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
-klog            (Node ffff8801b903fa80), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.006718] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
+klog            ffff8801b903fa80), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorCouldNotEnable: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
 klog            Kernel message: [ 2.022076] ACPI Error: Could not enable
 klog            SleepButton event (20110112/evxfevnt-198)
 klog            
@@ -11521,7 +11500,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningCouldNotEnable: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiCannotEnableFixedEvent: Test 1, HIGH
 klog            Kernel message: [ 2.022090] ACPI Warning: Could not enable
 klog            fixed event 0x3 (20110112/evxface-197)
 klog            
@@ -11529,25 +11508,25 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.033653] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
-klog            f6031468), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.033653] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f6031468),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.033670] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
-klog            f6031480), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.033670] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f6031480),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugACPIInvalidBIOS: Test 1,
+klog            FAILED [MEDIUM] KlogAcpiInvalidPssFrequency: Test 1,
 klog            MEDIUM Kernel message: [ 2.039517] [Firmware Bug]: ACPI:
 klog            Invalid BIOS _PSS frequency: 0x80000000 MHz
 klog            
@@ -11555,7 +11534,7 @@ klog            ADVICE: _PSS (Performance Supported States) package has an
 klog            incorrectly define core frequency (first DWORD entry in
 klog            the _PSS package).
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 2.045931] ACPI Warning for
 klog            _SB_.PCI0.P0P1._PRT: Return Package has no elements
 klog            (empty) (20100428/nspredef-456)
@@ -11564,7 +11543,7 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 2.049441] ACPI Warning for
 klog            _PR_.CPU0._PSD: Return Package type mismatch at index 4 -
 klog            found [NULL Object Descriptor], expected Integer (20090903
@@ -11574,106 +11553,106 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.068617] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
-klog            f3c29e58), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.068617] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SATA.PRT0._SDD] (Node f3c29e58),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 2.081502] ACPI Error (psargs-0359): [NPSS] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 2.081502] ACPI Error (psargs-0359): [NPSS]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.081508] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0.PPC_] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.081508] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU0.PPC_] (Node
 klog            ffff8801534e5c20), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.081585] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU0._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.081585] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU0._PPC] (Node
 klog            ffff8801534e5b40), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.083171] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.083171] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU1._PPC] (Node
 klog            ffff8801534e5c00), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.084838] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU2._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.084838] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU2._PPC] (Node
 klog            ffff8801534e5de0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.085644] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU3._PPC] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.085644] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU3._PPC] (Node
 klog            ffff8801534e5d60), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.106307] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
-klog            ffff88023f45dca8), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.106307] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff88023f45dca8),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.106326] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
-klog            ffff88023f45dcd0), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.106326] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff88023f45dcd0),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.113330] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
-klog            f74317b0), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.113330] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f74317b0),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.113367] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
-klog            f74317c8), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.113367] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f74317c8),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorCouldNotEnable: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
 klog            Kernel message: [ 2.132386] ACPI Error: Could not enable
 klog            SleepButton event (20090903/evxfevnt-193)
 klog            
@@ -11681,7 +11660,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningCouldNotEnable: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiCannotEnableFixedEvent: Test 1, HIGH
 klog            Kernel message: [ 2.132392] ACPI Warning: Could not enable
 klog            fixed event 3 (20090903/evxface-146)
 klog            
@@ -11689,34 +11668,34 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.149905] ACPI Error: Method parse
-klog            /execution failed [_SB_.C003.C099._DOD] (Node f30275a0),
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 2.149905] ACPI Error: Method parse/execution
+klog            failed [_SB_.C003.C099._DOD] (Node f30275a0),
 klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 2.173036] ACPI Warning for
-klog            _SB_._OSC: Return type mismatch - found Integer, expected
-klog            Buffer (20090903/nspredef-1006)
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 2.173036] ACPI Warning for _SB_._OSC:
+klog            Return type mismatch - found Integer, expected Buffer
+klog            (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 2.173935] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - C3, should be C2
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 2.173935] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - C3, should be C2 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.200371] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.200371] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node f602bf30),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11724,8 +11703,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.200380] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.200380] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node f602d2d0),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11733,8 +11712,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.206433] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.206433] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node f742d018),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11742,8 +11721,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.206443] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.206443] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node f742d3a8),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11751,17 +11730,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 2.222353] ACPI Error: [EABF]
-klog            Namespace lookup failure, AE_ALREADY_EXISTS (20110112
-klog            /dswload-802)
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 2.222353] ACPI Error: [EABF] Namespace
+klog            lookup failure, AE_ALREADY_EXISTS (20110112/dswload-802)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.222362] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.222362] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node f602d018),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11769,8 +11747,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.222372] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.222372] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node f602d3a8),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11778,44 +11756,44 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 2.227407] ACPI Error (psargs-0359): [GTF1] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 2.227407] ACPI Error (psargs-0359): [GTF1]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.227411] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SAT0.PRT1._SDD]
-klog            (Node f702b7b0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.227411] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
+klog            f702b7b0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.227454] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SAT0.PRT1._GTF]
-klog            (Node f702b7c8), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.227454] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
+klog            f702b7c8), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 2.229498] ACPI Warning:
-klog            Incorrect checksum in table [TAMG] - 0xC6, should be 0xC5
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 2.229498] ACPI Warning: Incorrect
+klog            checksum in table [TAMG] - 0xC6, should be 0xC5 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.231431] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.231431] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node f602bf60),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11823,8 +11801,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.231442] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.231442] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node f602d300),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11832,8 +11810,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.250291] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.250291] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT1.UBIF] (Node ffff88013762f550)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11841,8 +11819,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.250306] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.250306] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT1._BIF] (Node ffff88013762f500)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11850,8 +11828,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.270835] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.270835] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node ffff880125e2c708)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11859,79 +11837,79 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 2.280398] ACPI Error (dswload-0781)
-klog            : [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 2.280398] ACPI Error (dswload-0781):
+klog            [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.280410] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.BAT1.UBIF] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.280410] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.BAT1.UBIF] (Node
 klog            ffff8800b3c2e100), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.280443] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.BAT1._BIF] (Node
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.280443] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.BAT1._BIF] (Node
 klog            ffff8800b3c2e0c0), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 2.283579] ACPI Error (psargs-0359): [_T_0] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 2.283579] ACPI Error (psargs-0359): [_T_0]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.283585] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.BAT1.UBIF] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.283585] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.BAT1.UBIF] (Node
 klog            ffff8800b3c2e100), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.283615] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._Q09]
-klog            (Node ffff8800b3c410e0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.283615] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.EC0_._Q09] (Node
+klog            ffff8800b3c410e0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.288649] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
-klog            ffff88023f45dcd0), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.288649] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff88023f45dcd0),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.288685] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
-klog            ffff88023f45dcf8), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.288685] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff88023f45dcf8),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.294251] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.294251] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node f742bf30),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11939,8 +11917,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.294262] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.294262] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node f742d2d0),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -11948,17 +11926,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 2.324547] ACPI Error: [EABF]
-klog            Namespace lookup failure, AE_ALREADY_EXISTS (20110413
-klog            /dswload2-316)
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 2.324547] ACPI Error: [EABF] Namespace
+klog            lookup failure, AE_ALREADY_EXISTS (20110413/dswload2-316)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.324556] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.324556] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node f742d018),
 klog            AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -11966,8 +11943,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.324566] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.324566] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node f742d3a8),
 klog            AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -11975,113 +11952,115 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 2.334361] ACPI Error: Attempt to CreateField of length
-klog            zero (20110112/dsopcode-529)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 2.334361] ACPI Error: Attempt to CreateField of
+klog            length zero (20110112/dsopcode-529)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 2.334370] ACPI Error: Method parse/execution
-klog            failed [_SB_.PCI0.IDE0.RATA] (Node ffff8801376322a8),
-klog            AE_AML_OPERAND_VALUE (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 2.334370] ACPI Error: Method parse
+klog            /execution failed [_SB_.PCI0.IDE0.RATA] (Node
+klog            ffff8801376322a8), AE_AML_OPERAND_VALUE (20110112
+klog            /psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 2.334384] ACPI Error: Method parse/execution
-klog            failed [_SB_.PCI0.IDE0.PRT1._GTF] (Node ffff880137632438),
-klog            AE_AML_OPERAND_VALUE (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 2.334384] ACPI Error: Method parse
+klog            /execution failed [_SB_.PCI0.IDE0.PRT1._GTF] (Node
+klog            ffff880137632438), AE_AML_OPERAND_VALUE (20110112
+klog            /psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.336604] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.GFX0._DOD]
-klog            (Node ffff88013b63c460), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 2.336604] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog            ffff88013b63c460), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.384172] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
-klog            ffff8801c305dcd0), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.384172] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff8801c305dcd0),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.384189] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
-klog            ffff8801c305dcf8), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.384189] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff8801c305dcf8),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 2.440684] ACPI Error (psargs-0359): [SMS_] Namespace
-klog            lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 2.440684] ACPI Error (psargs-0359): [SMS_]
+klog            Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.440692] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
-klog            (Node ffff88007db30c60), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.440692] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
+klog            ffff88007db30c60), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.462687] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
-klog            ffff880147646cd0), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.462687] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff880147646cd0),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.462711] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
-klog            ffff880147646cf8), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.462711] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880147646cf8),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.468708] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU1._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 2.468708] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU1._PDC] (Node
 klog            f700f180), AE_INVALID_TABLE_LENGTH
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.468963] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.CPU2._PDC] (Node
+klog            FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog            Kernel message: [ 2.468963] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_PR_.CPU2._PDC] (Node
 klog            f700f240), AE_INVALID_TABLE_LENGTH
 klog            
 klog            ADVICE: The ACPI Method returned a table of the incorrect
 klog            length. This can lead to unexepected results.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines
 klog            _DOD but not _DOS
 klog            
@@ -12090,80 +12069,80 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.592359] ACPI Error: Method parse
-klog            /execution failed [_PR_.CPU0.PPC_] (Node ffff88014f9a4140)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.592359] ACPI Error: Method parse/execution
+klog            failed [_PR_.CPU0.PPC_] (Node ffff88014f9a4140),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.592381] ACPI Error: Method parse
-klog            /execution failed [_PR_.CPU0._PPC] (Node ffff88014f9a4028)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.592381] ACPI Error: Method parse/execution
+klog            failed [_PR_.CPU0._PPC] (Node ffff88014f9a4028),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.593071] ACPI Error: Method parse
-klog            /execution failed [_PR_.CPU1._PPC] (Node ffff88014f9a4118)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.593071] ACPI Error: Method parse/execution
+klog            failed [_PR_.CPU1._PPC] (Node ffff88014f9a4118),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.593648] ACPI Error: Method parse
-klog            /execution failed [_PR_.CPU2._PPC] (Node ffff88014f9a4370)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.593648] ACPI Error: Method parse/execution
+klog            failed [_PR_.CPU2._PPC] (Node ffff88014f9a4370),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.593935] ACPI Error: Method parse
-klog            /execution failed [_PR_.CPU3._PPC] (Node ffff88014f9a42d0)
-klog            , AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.593935] ACPI Error: Method parse/execution
+klog            failed [_PR_.CPU3._PPC] (Node ffff88014f9a42d0),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 2.634350] ACPI Error: [GTF1] Namespace lookup failure,
-klog            AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 2.634350] ACPI Error: [GTF1] Namespace lookup
+klog            failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.634355] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
-klog            f3431af8), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.634355] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f3431af8),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.634373] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
-klog            f3431b10), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.634373] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f3431b10),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.671117] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.671117] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node f2c2d018),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12171,8 +12150,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.671128] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.671128] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node f2c2d3a8),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12180,26 +12159,26 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.701908] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
-klog            f3831af8), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.701908] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f3831af8),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.701933] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
-klog            f3831b10), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.701933] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f3831b10),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.771747] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.771747] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node f402bf60),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12207,8 +12186,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.771758] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 2.771758] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node f402d300),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12216,7 +12195,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 2.787172] ACPI Warning: For
 klog            _SB_.PCI0.P0P1._PRT: Return Package has no elements
 klog            (empty) (20110112/nspredef-456)
@@ -12225,32 +12204,32 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
-klog            Kernel message: [ 2.823916] ACPI Warning: _BQC returned an
-klog            invalid level 20090521 video-629
+klog            FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
+klog            HIGH Kernel message: [ 2.823916] ACPI Warning: _BQC
+klog            returned an invalid level 20090521 video-629
 klog            
 klog            ADVICE: Method _BQC (Brightness Query Current) returned an
 klog            invalid display brightness level.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.837958] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
-klog            f7431858), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.837958] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f7431858),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.837994] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
-klog            f7431870), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.837994] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f7431870),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 2.838171] ACPI Warning for
 klog            _SB_.BAT0._BIF: Return Package type mismatch at index 9 -
 klog            found [NULL Object Descriptor], expected String/Buffer
@@ -12260,60 +12239,59 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
-klog            Kernel message: [ 2.851027] ACPI Warning: _BQC returned an
-klog            invalid level (20110316/video-473)
+klog            FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
+klog            HIGH Kernel message: [ 2.851027] ACPI Warning: _BQC
+klog            returned an invalid level (20110316/video-473)
 klog            
 klog            ADVICE: Method _BQC (Brightness Query Current) returned an
 klog            invalid display brightness level.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.860339] ACPI Error: Method parse
-klog            /execution failed [_SB_.C003.C098._DOD] (Node f4427588),
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 2.860339] ACPI Error: Method parse/execution
+klog            failed [_SB_.C003.C098._DOD] (Node f4427588),
 klog            AE_AML_PACKAGE_LIMIT (20110413/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 2.861808] ACPI Error: [_SB_.PCI0.GFX0.DD02._BCL]
-klog            Namespace lookup failure, AE_NOT_FOUND (20110112
-klog            /psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 2.861808] ACPI Error:
+klog            [_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure,
+klog            AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.861812] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 2.861812] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node
 klog            ffff88015746e168), AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 2.870589] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DOD] (Node
-klog            ffff880137632c80), AE_AML_PACKAGE_LIMIT (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 2.870589] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DOD] (Node ffff880137632c80),
+klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 2.906610] ACPI Warning: For
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 2.906610] ACPI Warning: For
 klog            _SB_.PCI0.P0P2.PEGP._DOD: Return type mismatch - found
 klog            Integer, expected Package (20110413/nspredef-1053)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 2.949708] ACPI Error: Field
 klog            [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits)
 klog            (20110112/dsopcode-597)
@@ -12322,8 +12300,8 @@ klog            ADVICE: The field exceeds the allocated buffer size. This
 klog            can lead to unexpected results when fetching data outside
 klog            this region.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorSBOSCAEAMLBUFFERLIMIT: Test
-klog            1, CRITICAL Kernel message: [ 2.949716] ACPI Error: Method
+klog            FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1,
+klog            CRITICAL Kernel message: [ 2.949716] ACPI Error: Method
 klog            parse/execution failed [_SB_._OSC] (Node ffff880297016ca8)
 klog            , AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
@@ -12333,70 +12311,70 @@ klog            an 8 byte buffer of 2 x 32 DWORDs, however it appears that
 klog            the method is possibly trying to access data outside this
 klog            buffer. This is a bug in the _OSC method.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.005123] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_._OSC] (Node
-klog            ffff88122fc1ea00), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 3.005123] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_._OSC] (Node ffff88122fc1ea00)
+klog            , AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 3.033154] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 0x87, should be 0x84
-klog            (20100428/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 3.033154] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 0x87, should be 0x84 (20100428
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.112435] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_PR_.PPCE] (Node
-klog            f74257c8), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 3.112435] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.PPCE] (Node f74257c8),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.112465] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [EV4_] (Node f742c210),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 3.112465] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [EV4_] (Node f742c210),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.112494] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [SMIE] (Node f7427a20),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 3.112494] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [SMIE] (Node f7427a20),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.112522] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [NEVT] (Node f74279d8),
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 3.112522] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [NEVT] (Node f74279d8),
 klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.112549] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
-klog            (Node f7427690), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 3.112549] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
+klog            f7427690), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines
 klog            _DOD but not _DOS
 klog            
@@ -12405,43 +12383,43 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.208822] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.C003.C098._DOD]
-klog            (Node ffff88007cf30b60), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 3.208822] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.C003.C098._DOD] (Node
+klog            ffff88007cf30b60), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.223518] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.GFX0._DOD]
-klog            (Node ffff880236c469a0), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 3.223518] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog            ffff880236c469a0), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 3.382436] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 00, should be 7F
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 3.382436] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 00, should be 7F (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 3.382442] ACPI Warning:
-klog            Incorrect checksum in table [_RAT] - 00, should be 63
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 3.382442] ACPI Warning: Incorrect
+klog            checksum in table [_RAT] - 00, should be 63 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 3.420672] ACPI Warning for
 klog            _TZ_.THRM._PSL: Return Package type mismatch at index 0 -
 klog            found Processor, expected Reference (20100428
@@ -12451,39 +12429,39 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 3.480092] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 3.480092] ACPI Warning for
 klog            _SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found
 klog            Integer, expected Buffer (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 3.490098] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 3.490098] ACPI Warning for
 klog            _SB_.PCI0.SAT0.PRT1._GTF: Return type mismatch - found
 klog            Integer, expected Buffer (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.490832] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PMI0._GHL] (Node
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 3.490832] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PMI0._GHL] (Node
 klog            ffff88013bc2bdc0), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.490852] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PMI0._PMC] (Node
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 3.490852] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PMI0._PMC] (Node
 klog            ffff88013bc2bd40), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorCouldNotEnable: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
 klog            Kernel message: [ 3.502273] ACPI Error: Could not enable
 klog            SleepButton event (20100428/evxfevnt-205)
 klog            
@@ -12491,25 +12469,25 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.601126] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.GFX0._DOD]
-klog            (Node f7420690), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 3.601126] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog            f7420690), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 3.644168] ACPI Warning:
-klog            Incorrect checksum in table [TCPA] - 0xF8, should be 0x9C
-klog            (20110413/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 3.644168] ACPI Warning: Incorrect
+klog            checksum in table [TCPA] - 0xF8, should be 0x9C (20110413
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 3.663829] [Firmware Bug]: ACPI(GFX0) defines
 klog            _DOD but not _DOS
 klog            
@@ -12518,34 +12496,33 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorEvaluatingBCMFailed: Test 1,
-klog            HIGH Kernel message: [ 3.675814] ACPI Error: Evaluating
-klog            _BCM failed (20100428/video-532)
+klog            FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel
+klog            message: [ 3.675814] ACPI Error: Evaluating _BCM failed
+klog            (20100428/video-532)
 klog            
-klog            ADVICE: The ACPI engine has failed to execute the _BCM
-klog            Brightness Control Method. This will result in possibly
-klog            failing to set the display brightness level.
+klog            ADVICE: Could not set the brightness level, the ACPI
+klog            control _BCM failed to execute correctly.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.868794] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
-klog            f3831b58), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 3.868794] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3831b58),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.868812] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
-klog            f3831b70), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 3.868812] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3831b70),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.983031] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 3.983031] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node ffff88021d459028),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12553,8 +12530,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 3.983040] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 3.983040] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node ffff88021d459618)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12562,7 +12539,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines
 klog            _DOD but not _DOS
 klog            
@@ -12571,17 +12548,17 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [MEDIUM] KlogACPIWarningIncorrectChecksumIn: Test 1
-klog            , MEDIUM Kernel message: [ 4.046031] ACPI Warning:
-klog            Incorrect checksum in table [OEMB] - 4A, should be 47
-klog            (20090903/tbutils-314)
+klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
+klog            MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect
+klog            checksum in table [OEMB] - 4A, should be 47 (20090903
+klog            /tbutils-314)
 klog            
 klog            ADVICE: The ACPI table listed above has an incorrect
 klog            checksum, this could be a BIOS bug or due to table
 klog            corruption.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.115197] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 4.115197] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node ffff88021d458eb0),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12589,8 +12566,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.115206] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 4.115206] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node ffff88021d4594b0)
 klog            , AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12598,102 +12575,93 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.190434] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DOD] (Node
-klog            ffff8801376342f8), AE_AML_PACKAGE_LIMIT (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 4.190434] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DOD] (Node ffff8801376342f8),
+klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.198699] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
-klog            f3831c00), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 4.198699] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f3831c00),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.198716] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
-klog            f3831c18), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 4.198716] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f3831c18),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIExceptionAETIMEReturnedByHandler:
-klog            Test 1, HIGH Kernel message: [ 4.230508] ACPI Exception:
-klog            AE_TIME, Returned by Handler for [EmbeddedControl]
-klog            (20090903/evregion-424)
+klog            FAILED [HIGH] KlogAcpiRegionHandlerError: Test 1, HIGH
+klog            Kernel message: [ 4.230508] ACPI Exception: AE_TIME,
+klog            Returned by Handler for [EmbeddedControl] (20090903
+klog            /evregion-424)
 klog            
-klog            ADVICE: This is most probably caused by when a read or
-klog            write operation to the EC memory has failed because of a
-klog            timeout waiting for the Embedded Controller to complete
-klog            the transaction. Normally, the kernel waits for 500ms for
-klog            the Embedded Controller status port to indicate that a
-klog            transaction is complete, but in this case it has not and a
-klog            AE_TIME error has been returned. 
+klog            ADVICE: The ACPI driver detected an error returned by a
+klog            region handler.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.230527] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.ISAB.ECDV.ECR1]
-klog            (Node f7018ed0), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 4.230527] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.ISAB.ECDV.ECR1] (Node
+klog            f7018ed0), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.230612] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.ISAB.ECDV.ECR2]
-klog            (Node f7018ee8), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 4.230612] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.ISAB.ECDV.ECR2] (Node
+klog            f7018ee8), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.230643] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [ECRW] (Node f7018fa8),
-klog            AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 4.230643] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECRW] (Node f7018fa8), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.230672] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [ECG1] (Node f7018fd8),
-klog            AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 4.230672] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECG1] (Node f7018fd8), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.230701] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [NEVT] (Node f70186f0),
-klog            AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 4.230701] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [NEVT] (Node f70186f0), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.230730] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.ISAB.ECDV._Q66]
-klog            (Node f7018eb8), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 4.230730] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.ISAB.ECDV._Q66] (Node
+klog            f7018eb8), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 4.576415] ACPI Error: No handler for
 klog            Region [ERAM] (f4830d50) [EmbeddedControl] (20110112
 klog            /evregion-369)
@@ -12702,8 +12670,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.576437] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 4.576437] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
 klog            f48326d8), AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -12711,8 +12679,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.638115] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 4.638115] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node ffff880220c5b028),
 klog            AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -12720,8 +12688,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.638127] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 4.638127] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node ffff880220c5b618)
 klog            , AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -12729,35 +12697,35 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.838935] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_TZ_.C2E8] (Node
-klog            f701b108), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 4.838935] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_TZ_.C2E8] (Node f701b108),
+klog            AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.838984] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_TZ_.C2E7] (Node
-klog            f701b0f0), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 4.838984] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_TZ_.C2E7] (Node f701b0f0),
+klog            AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.839033] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_TZ_.TZ2_._TMP] (Node
-klog            f701b7c8), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 4.839033] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_TZ_.TZ2_._TMP] (Node f701b7c8),
+klog            AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.890970] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 4.890970] ACPI Error: Method parse
 klog            /execution failed [_SB_.EEAC] (Node ffff880126e43f50),
 klog            AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -12765,8 +12733,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 4.890980] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 4.890980] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT2._STA] (Node ffff880126e44550)
 klog            , AE_ALREADY_EXISTS (20110413/psparse-536)
 klog            
@@ -12774,7 +12742,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines
 klog            _DOD but not _DOS
 klog            
@@ -12783,7 +12751,7 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 5.150560] ACPI Warning for
 klog            _SB_.BAT0._BIF: Return Package type mismatch at index 12 -
 klog            found Integer, expected String/Buffer (20090903
@@ -12793,17 +12761,17 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 5.332663] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DOD] (Node f4425450),
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 5.332663] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DOD] (Node f4425450),
 klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 6.224974] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 6.224974] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node
 klog            f3423438), AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12811,8 +12779,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 6.224987] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 6.224987] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node
 klog            f3423420), AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12820,8 +12788,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 6.227917] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 6.227917] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node
 klog            f34235b8), AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12829,8 +12797,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 6.227930] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 6.227930] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node
 klog            f34235a0), AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12838,17 +12806,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 6.732287] ACPI Error: [_T_0]
-klog            Namespace lookup failure, AE_ALREADY_EXISTS (20110112
-klog            /dswload-802)
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 6.732287] ACPI Error: [_T_0] Namespace
+klog            lookup failure, AE_ALREADY_EXISTS (20110112/dswload-802)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 6.732310] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 6.732310] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT1.UBIF] (Node dd028fc0),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12856,8 +12823,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 6.732334] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 6.732334] ACPI Error: Method parse
 klog            /execution failed [_SB_.BAT1._BIF] (Node dd028f90),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12865,17 +12832,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 6.773266] ACPI Error: [CAPB]
-klog            Namespace lookup failure, AE_ALREADY_EXISTS (20101013
-klog            /dsfield-143)
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 6.773266] ACPI Error: [CAPB] Namespace
+klog            lookup failure, AE_ALREADY_EXISTS (20101013/dsfield-143)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 6.773285] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 6.773285] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node ddc25ca8),
 klog            AE_ALREADY_EXISTS (20101013/psparse-537)
 klog            
@@ -12883,7 +12849,7 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNoHandlerFor: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 7.365139] ACPI Error: No handler for
 klog            Region [IPMI] (ffff8805ffa37240) [IPMI] (20110112
 klog            /evregion-369)
@@ -12892,16 +12858,16 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorRegionHas: Test 1, HIGH Kernel
-klog            message: [ 7.365150] ACPI Error: Region IPMI(0x7) has no
-klog            handler (20110112/exfldio-292)
+klog            FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH
+klog            Kernel message: [ 7.365150] ACPI Error: Region IPMI(0x7)
+klog            has no handler (20110112/exfldio-292)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 7.365161] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 7.365161] ACPI Error: Method parse
 klog            /execution failed [_SB_.PMI0._GHL] (Node ffff8805ffa36b18)
 klog            , AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -12909,8 +12875,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 7.365181] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog            Kernel message: [ 7.365181] ACPI Error: Method parse
 klog            /execution failed [_SB_.PMI0._PMC] (Node ffff8805ffa36a78)
 klog            , AE_NOT_EXIST (20110112/psparse-536)
 klog            
@@ -12918,52 +12884,50 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 8.137284] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
-klog            (Node f702e720), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 8.137284] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
+klog            f702e720), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 8.137317] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [ECRB] (Node f702e7f8),
-klog            AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 8.137317] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECRB] (Node f702e7f8), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 8.137344] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [EC0A] (Node f702ea08),
-klog            AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 8.137344] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [EC0A] (Node f702ea08), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 8.137370] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.AMW0._WED] (Node
-klog            f7019ca8), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 8.137370] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.AMW0._WED] (Node f7019ca8),
+klog            AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 8.227953] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.C003.C098._DOD]
-klog            (Node f7021588), AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 8.227953] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.C003.C098._DOD] (Node
+klog            f7021588), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines
 klog            _DOD but not _DOS
 klog            
@@ -12972,8 +12936,8 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 8.794633] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 8.794633] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0._OSC] (Node f5824ab0),
 klog            AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -12981,43 +12945,41 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.141980] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
-klog            (Node f702e690), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 9.141980] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
+klog            f702e690), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.142017] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [ECRB] (Node f702e768),
-klog            AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 9.142017] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECRB] (Node f702e768), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.142046] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [EC0A] (Node f702e978),
-klog            AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 9.142046] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [EC0A] (Node f702e978), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.142076] ACPI Error (psparse-0537)
-klog            : Method parse/execution failed [_SB_.AMW0._WED] (Node
-klog            f7019420), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 9.142076] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.AMW0._WED] (Node f7019420),
+klog            AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageType: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
 klog            HIGH Kernel message: [ 9.267040] ACPI Warning for
 klog            _SB_.SPM_._PMD: Return Package type mismatch at index 0 -
 klog            found String, expected Reference (20090903/nspredef-1012)
@@ -13026,123 +12988,118 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with incorrectly typed data. The
 klog            offending method needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.391036] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.IBCM] (Node f3828738),
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 9.391036] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.IBCM] (Node f3828738),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.391049] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node
-klog            f3824b28), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 9.391049] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0.DD03._BCM] (Node f3824b28),
+klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorEvaluatingBCMFailed: Test 1,
-klog            HIGH Kernel message: [ 9.391061] ACPI Error: Evaluating
-klog            _BCM failed (20110112/video-365)
+klog            FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel
+klog            message: [ 9.391061] ACPI Error: Evaluating _BCM failed
+klog            (20110112/video-365)
 klog            
-klog            ADVICE: The ACPI engine has failed to execute the _BCM
-klog            Brightness Control Method. This will result in possibly
-klog            failing to set the display brightness level.
+klog            ADVICE: Could not set the brightness level, the ACPI
+klog            control _BCM failed to execute correctly.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 9.393479] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 9.393479] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88012d8cfee8
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.393498] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
-klog            ffff88012f83e6b8), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 9.393498] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node ffff88012f83e6b8),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.393510] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
-klog            ffff88012f83e690), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 9.393510] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0.DD02._BQC] (Node ffff88012f83e690),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 9.394098] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 9.394098] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88012d8cfd38
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.394109] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node
-klog            ffff88012f83e6e0), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 9.394109] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node ffff88012f83e6e0),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.394118] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0.DD02._BCM] (Node
-klog            ffff88012f83e668), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 9.394118] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0.DD02._BCM] (Node ffff88012f83e668),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.957372] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
-klog            ffff88007af33780), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 9.957372] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node ffff88007af33780),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.957372] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
-klog            ffff88007af33910), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 9.957372] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node ffff88007af33910),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.957372] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
-klog            ffff88007af32b68), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 9.957372] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SATA.CHN0._GTM] (Node ffff88007af32b68),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 9.957372] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
-klog            ffff88007af32cf8), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 9.957372] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.SATA.CHN1._GTM] (Node ffff88007af32cf8),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines
 klog            _DOD but not _DOS
 klog            
@@ -13151,43 +13108,41 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 10.120967] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 10.120967] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88023bcba438
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.120977] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DSM] (Node
-klog            ffff88023f45edc0), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 10.120977] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DSM] (Node ffff88023f45edc0),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 10.121007] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 10.121007] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88023bcba1b0
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.121018] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.PEG0.GFX0._DSM] (Node
-klog            ffff88023f474370), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 10.121018] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.PEG0.GFX0._DSM] (Node ffff88023f474370),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 10.194089] ACPI Warning for
 klog            _SB_.PCI0.PCIB._PRT: Return Package has no elements
 klog            (empty) (20100428/nspredef-456)
@@ -13196,51 +13151,49 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 10.289821] ACPI Error (psargs-0359): [_PR_.CPU0._CST]
-klog            Namespace lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 10.289821] ACPI Error (psargs-0359):
+klog            [_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.289828] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_PR_.CPU1._CST] (Node f70c3288), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 10.289828] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.CPU1._CST] (Node f70c3288),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorSMBusOrIPMI: Test 1, HIGH
-klog            Kernel message: [ 10.344782] ACPI Error: SMBus or IPMI
-klog            write requires Buffer of length 42, found length 20
+klog            FAILED [HIGH] KlogAcpiIncorrectWriteBufferSize: Test 1,
+klog            HIGH Kernel message: [ 10.344782] ACPI Error: SMBus or
+klog            IPMI write requires Buffer of length 42, found length 20
 klog            (20090903/exfield-286)
 klog            
 klog            ADVICE: An incorrect SMBus or IPMI write buffer size was
 klog            used.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.344788] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PMI0._GHL] (Node ffff88122fc1ece0),
-klog            AE_AML_BUFFER_LIMIT
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 10.344788] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PMI0._GHL] (Node
+klog            ffff88122fc1ece0), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.344812] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PMI0._PMC] (Node ffff88122fc1ec60),
-klog            AE_AML_BUFFER_LIMIT
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 10.344812] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PMI0._PMC] (Node
+klog            ffff88122fc1ec60), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 10.380244] ACPI Warning
 klog            (nspredef-0357): _SB_.PCI0.VID2._DOD: Return Package has
 klog            no elements (empty) [20080926]
@@ -13249,471 +13202,442 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 10.680422] ACPI Error: Method parse/execution
-klog            failed [_SB_.PCI0.GFX0.DD02._BCM] (Node ffff880117642ed8),
-klog            AE_AML_INFINITE_LOOP (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 10.680422] ACPI Error: Method parse
+klog            /execution failed [_SB_.PCI0.GFX0.DD02._BCM] (Node
+klog            ffff880117642ed8), AE_AML_INFINITE_LOOP (20110112
+klog            /psparse-536)
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.692650] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.ECDV.ECR2] (Node f702e738), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.692650] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV.ECR2] (Node
+klog            f702e738), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.692684] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECRW] (Node
-klog            f702e810), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.692684] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECRW] (Node f702e810), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.692710] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECG1] (Node
-klog            f702e840), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.692710] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECG1] (Node f702e840), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.692735] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [NEVT] (Node
-klog            f702ea50), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.692735] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [NEVT] (Node f702ea50), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.692761] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.ECDV._Q66] (Node f702e708), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.692761] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
+klog            f702e708), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.708822] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.ECDV.ECR1] (Node f7427738), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.708822] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
+klog            f7427738), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.708876] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECRB] (Node
-klog            f7427810), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.708876] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECRB] (Node f7427810), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.708908] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [EC0A] (Node
-klog            f7427a20), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.708908] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [EC0A] (Node f7427a20), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.708939] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.AMW0._WED] (Node f742c078), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.708939] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.AMW0._WED] (Node f742c078),
+klog            AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.724353] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880213050d00),
-klog            AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.724353] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
+klog            ffff880213050d00), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.724416] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECRB] (Node
-klog            ffff880213050e20), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.724416] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECRB] (Node ffff880213050e20), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.724449] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [EC0A] (Node
-klog            ffff8802130520e0), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.724449] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [EC0A] (Node ffff8802130520e0), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 10.724482] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.AMW0._WED] (Node ffff8802130573c0), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 10.724482] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.AMW0._WED] (Node ffff8802130573c0)
+klog            , AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 11.195653] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECG5] (Node
-klog            f702e8a0), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 11.195653] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECG5] (Node f702e8a0), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 11.195680] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.AC__._PSR] (Node f702ec90), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 11.195680] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.AC__._PSR] (Node f702ec90),
+klog            AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 11.383565] ACPI Error: Method parse
-klog            /execution failed [_SB_.C003.C098._DOD] (Node
-klog            ffff880137636938), AE_AML_PACKAGE_LIMIT (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 11.383565] ACPI Error: Method parse/execution
+klog            failed [_SB_.C003.C098._DOD] (Node ffff880137636938),
+klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 11.660551] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.ECDV.ECR2] (Node f702e6a8), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 11.660551] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV.ECR2] (Node
+klog            f702e6a8), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 11.660591] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECRW] (Node
-klog            f702e780), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 11.660591] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECRW] (Node f702e780), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 11.660615] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECG1] (Node
-klog            f702e7b0), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 11.660615] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECG1] (Node f702e7b0), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 11.660638] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [NEVT] (Node
-klog            f702e9c0), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 11.660638] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [NEVT] (Node f702e9c0), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 11.660661] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.ECDV._Q66] (Node f702e678), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 11.660661] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
+klog            f702e678), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 11.800514] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DOD] (Node
-klog            ffff8801376342a8), AE_AML_PACKAGE_LIMIT (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 11.800514] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DOD] (Node ffff8801376342a8),
+klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 11.880473] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 11.880473] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88012125f558
 klog            (20110413/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 11.880998] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 11.880998] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88012125f3a8
 klog            (20110413/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 11.915871] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_SB_.PCI0.SWFS] (Node
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 11.915871] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.SWFS] (Node
 klog            ffff880226c49320), AE_AML_INFINITE_LOOP
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 11.915905] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_SB_.PCI0.RBYT] (Node
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 11.915905] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.RBYT] (Node
 klog            ffff880226c493c0), AE_AML_INFINITE_LOOP
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 11.915932] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_SB_.PCI0.ASOC.SECV] (Node
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 11.915932] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.ASOC.SECV] (Node
 klog            ffff880226c4a0e0), AE_AML_INFINITE_LOOP
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 11.915960] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_SB_.PCI0.ASOC.RVLT] (Node
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 11.915960] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.ASOC.RVLT] (Node
 klog            ffff880226c49b00), AE_AML_INFINITE_LOOP
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 12.160904] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECG5] (Node
-klog            f702e810), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 12.160904] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECG5] (Node f702e810), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 12.160929] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.AC__._PSR] (Node f702ec00), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 12.160929] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.AC__._PSR] (Node f702ec00),
+klog            AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 12.167076] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 12.167076] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff8800b1753048
 klog            (20090903/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 12.167089] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.GFX0.DD02.GBQC] (Node ffff8800b3c44ca0),
-klog            AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 12.167089] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
+klog            ffff8800b3c44ca0), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 12.167143] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.GFX0.DD02._BQC] (Node ffff8800b3c44c80),
-klog            AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 12.167143] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
+klog            ffff8800b3c44c80), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrorEvaluating: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
 klog            Kernel message: [ 12.167205] ACPI Warning: Evaluating _BQC
 klog            failed (20090903/video-641)
 klog            
 klog            ADVICE: Executing the ACPI Method leaded in an execution
 klog            failure. This needs investigating.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 12.242368] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 12.242368] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88012ea6e6c0
 klog            (20110413/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 12.242387] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
-klog            ffff88013113f6b8), AE_AML_OPERAND_TYPE (20110413
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 12.242387] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node ffff88013113f6b8),
+klog            AE_AML_OPERAND_TYPE (20110413/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 12.242397] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
-klog            ffff88013113f690), AE_AML_OPERAND_TYPE (20110413
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 12.242397] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0.DD02._BQC] (Node ffff88013113f690),
+klog            AE_AML_OPERAND_TYPE (20110413/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrorEvaluating: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
 klog            Kernel message: [ 12.242409] ACPI Warning: Evaluating _BQC
 klog            failed (20110413/video-484)
 klog            
 klog            ADVICE: Executing the ACPI Method leaded in an execution
 klog            failure. This needs investigating.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 12.242974] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 12.242974] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88012ea6e5e8
 klog            (20110413/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 12.242986] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node
-klog            ffff88013113f6e0), AE_AML_OPERAND_TYPE (20110413
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 12.242986] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node ffff88013113f6e0),
+klog            AE_AML_OPERAND_TYPE (20110413/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 12.242994] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0.DD02._BCM] (Node
-klog            ffff88013113f668), AE_AML_OPERAND_TYPE (20110413
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 12.242994] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0.DD02._BCM] (Node ffff88013113f668),
+klog            AE_AML_OPERAND_TYPE (20110413/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorEvaluatingBCMFailed: Test 1,
-klog            HIGH Kernel message: [ 12.243002] ACPI Error: Evaluating
-klog            _BCM failed (20110413/video-365)
+klog            FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel
+klog            message: [ 12.243002] ACPI Error: Evaluating _BCM failed
+klog            (20110413/video-365)
 klog            
-klog            ADVICE: The ACPI engine has failed to execute the _BCM
-klog            Brightness Control Method. This will result in possibly
-klog            failing to set the display brightness level.
+klog            ADVICE: Could not set the brightness level, the ACPI
+klog            control _BCM failed to execute correctly.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 12.361137] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.C003.C09D._DOD] (Node ffff88013b630c00),
-klog            AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 12.361137] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.C003.C09D._DOD] (Node
+klog            ffff88013b630c00), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 12.390421] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECG5] (Node
-klog            ffff880213050f00), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 12.390421] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECG5] (Node ffff880213050f00), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 12.390446] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.AC__._PSR] (Node ffff880213052440), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 12.390446] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.AC__._PSR] (Node ffff880213052440)
+klog            , AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 12.553637] ACPI Warning: For
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 12.553637] ACPI Warning: For
 klog            _SB_.PCI0.P0P2.PEGP._DOD: Return type mismatch - found
 klog            Integer, expected Package (20110112/nspredef-1053)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIExceptionAETIMEReturnedByHandler:
-klog            Test 1, HIGH Kernel message: [ 12.838979] cfg80211:
-klog            Ignoring regulatory request Set by core since the driver
-klog            uses its own custom regulatory domain ACPI Exception:
-klog            AE_TIME, Returned by Handler for [EmbeddedControl]
-klog            (20110112/evregion-474)
-klog            
-klog            ADVICE: This is most probably caused by when a read or
-klog            write operation to the EC memory has failed because of a
-klog            timeout waiting for the Embedded Controller to complete
-klog            the transaction. Normally, the kernel waits for 500ms for
-klog            the Embedded Controller status port to indicate that a
-klog            transaction is complete, but in this case it has not and a
-klog            AE_TIME error has been returned. 
-klog            
-klog            FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
-klog            Kernel message: [ 12.841008] cfg80211: Ignoring regulatory
+klog            FAILED [HIGH] KlogAcpiRegionHandlerError: Test 1, HIGH
+klog            Kernel message: [ 12.838979] cfg80211: Ignoring regulatory
 klog            request Set by core since the driver uses its own custom
-klog            regulatory domain ACPI Warning: _BQC returned an invalid
-klog            level (20110112/video-473)
+klog            regulatory domain ACPI Exception: AE_TIME, Returned by
+klog            Handler for [EmbeddedControl] (20110112/evregion-474)
+klog            
+klog            ADVICE: The ACPI driver detected an error returned by a
+klog            region handler.
+klog            
+klog            FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
+klog            HIGH Kernel message: [ 12.841008] cfg80211: Ignoring
+klog            regulatory request Set by core since the driver uses its
+klog            own custom regulatory domain ACPI Warning: _BQC returned
+klog            an invalid level (20110112/video-473)
 klog            
 klog            ADVICE: Method _BQC (Brightness Query Current) returned an
 klog            invalid display brightness level.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 13.024512] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DOD] (Node f7425450),
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 13.024512] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DOD] (Node f7425450),
 klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 13.396787] ACPI Error: Method parse
-klog            /execution failed [_SB_.ADP1._PSR] (Node ffff88011763ba00)
-klog            , AE_TIME (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 13.396787] ACPI Error: Method parse/execution failed
+klog            [_SB_.ADP1._PSR] (Node ffff88011763ba00), AE_TIME
+klog            (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [CRITICAL] KlogACPIErrorFieldexceedsBuffer: Test 1,
+klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 13.445954] ACPI Error: Field
 klog            [D128] at 1040 exceeds Buffer [NULL] size 160 (bits)
 klog            (20110112/dsopcode-597)
@@ -13722,67 +13646,67 @@ klog            ADVICE: The field exceeds the allocated buffer size. This
 klog            can lead to unexpected results when fetching data outside
 klog            this region.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 13.445980] ACPI Error: Method parse
-klog            /execution failed [_SB_.WMID.HWMC] (Node f742a8b8),
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 13.445980] ACPI Error: Method parse/execution
+klog            failed [_SB_.WMID.HWMC] (Node f742a8b8),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 13.446019] ACPI Error: Method parse
-klog            /execution failed [_SB_.WMID.WMAD] (Node f742aac8),
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 13.446019] ACPI Error: Method parse/execution
+klog            failed [_SB_.WMID.WMAD] (Node f742aac8),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 13.452167] ACPI Error (psargs-0359): [_PR_.C001]
-klog            Namespace lookup failure, AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 13.452167] ACPI Error (psargs-0359):
+klog            [_PR_.C001] Namespace lookup failure, AE_NOT_FOUND
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 13.452177] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPC0.EC0_.TPAF] (Node f702bde0), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 13.452177] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPC0.EC0_.TPAF] (Node
+klog            f702bde0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 13.452213] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPC0.EC0_.TBOM] (Node f702bdf8), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 13.452213] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPC0.EC0_.TBOM] (Node
+klog            f702bdf8), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 13.452247] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPC0.EC0_._Q1D] (Node f702ba98), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 13.452247] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPC0.EC0_._Q1D] (Node
+klog            f702ba98), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
-klog            Kernel message: [ 14.013275] ACPI Warning: _BQC returned
-klog            an invalid level (20110112/video-473)
+klog            FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
+klog            HIGH Kernel message: [ 14.013275] ACPI Warning: _BQC
+klog            returned an invalid level (20110112/video-473)
 klog            
 klog            ADVICE: Method _BQC (Brightness Query Current) returned an
 klog            invalid display brightness level.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 14.175645] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 14.175645] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.OVGA.DD03.GBQC] (Node
 klog            f44247e0), AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -13790,8 +13714,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 14.175656] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 14.175656] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.OVGA.DD03._BQC] (Node
 klog            f44247c8), AE_ALREADY_EXISTS (20110112/psparse-536)
 klog            
@@ -13799,103 +13723,100 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrorEvaluating: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
 klog            Kernel message: [ 14.175667] ACPI Warning: Evaluating _BQC
 klog            failed (20110112/video-484)
 klog            
 klog            ADVICE: Executing the ACPI Method leaded in an execution
 klog            failure. This needs investigating.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 14.885219] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 14.885219] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88013c6b58b8
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 14.885234] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DSM] (Node
-klog            ffff88013f849eb0), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 14.885234] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DSM] (Node ffff88013f849eb0),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 14.885277] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 14.885277] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88013c6b5828
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 14.885289] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node
-klog            ffff88013f86f668), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 14.885289] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node ffff88013f86f668),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 15.027464] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [_PR_.PPCE]
-klog            (Node ffff880075137920), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 15.027464] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_PR_.PPCE] (Node ffff880075137920)
+klog            , AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 15.027505] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [EV4_] (Node
-klog            ffff880075140660), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 15.027505] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [EV4_] (Node ffff880075140660),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 15.027542] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [SMIE] (Node
-klog            ffff88007513b180), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 15.027542] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [SMIE] (Node ffff88007513b180),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 15.027579] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [NEVT] (Node
-klog            ffff88007513b120), AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 15.027579] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [NEVT] (Node ffff88007513b120),
+klog            AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 15.027616] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.ECDV._Q66] (Node ffff880075139cc0),
-klog            AE_NOT_FOUND
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 15.027616] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
+klog            ffff880075139cc0), AE_NOT_FOUND
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
-klog            Kernel message: [ 15.287082] ACPI Warning: _BQC returned
-klog            an invalid level (20100428/video-640)
+klog            FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
+klog            HIGH Kernel message: [ 15.287082] ACPI Warning: _BQC
+klog            returned an invalid level (20100428/video-640)
 klog            
 klog            ADVICE: Method _BQC (Brightness Query Current) returned an
 klog            invalid display brightness level.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 15.395484] [Firmware Bug]: ACPI(PEGP) defines
 klog            _DOD but not _DOS
 klog            
@@ -13904,44 +13825,43 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 15.846531] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.GFX0._DOD] (Node ffff8800b3840360),
-klog            AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 15.846531] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog            ffff8800b3840360), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 16.336080] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.EC0_._Q33] (Node f70244b0), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 16.336080] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.EC0_._Q33] (Node
+klog            f70244b0), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 16.592600] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_SB_.PCI0.ASOC.SEFA] (Node
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 16.592600] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.ASOC.SEFA] (Node
 klog            ffff880226c4a120), AE_AML_INFINITE_LOOP
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorpsparse: Test 1, HIGH Kernel
-klog            message: [ 16.592628] ACPI Error (psparse-0537): Method
-klog            parse/execution failed [_SB_.PCI0.ASOC.RFAN] (Node
+klog            FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog            Kernel message: [ 16.592628] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.ASOC.RFAN] (Node
 klog            ffff880226c49bc0), AE_AML_INFINITE_LOOP
 klog            
 klog            ADVICE: The ACPI engine has failed to execute some AML.
 klog            The error message above lists the method that caused this
 klog            error.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnPackageHas: Test 1,
+klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 16.719798] ACPI Warning for
 klog            _SB_.PCI0.VID2._DOD: Return Package has no elements
 klog            (empty) (20090903/nspredef-433)
@@ -13950,150 +13870,143 @@ klog            ADVICE: ACPI AML interpreter executed a Method that
 klog            returned a package with no elements inside it. This is
 klog            most probably a bug in the Method and needs to be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNamespaceLookupFailure: Test 1,
-klog            HIGH Kernel message: [ 16.942589] ACPI Error
-klog            (dswload-0802): [_T_0] Namespace lookup failure,
-klog            AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog            Kernel message: [ 16.942589] ACPI Error (dswload-0802):
+klog            [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 16.942606] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.OVGA.DD03.GBQC] (Node ffff8800b7e3c6e0),
-klog            AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 16.942606] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.OVGA.DD03.GBQC]
+klog            (Node ffff8800b7e3c6e0), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 16.942654] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.OVGA.DD03._BQC] (Node ffff8800b7e3c6c0),
-klog            AE_ALREADY_EXISTS
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 16.942654] ACPI Error (psparse-0537):
+klog            Method parse/execution failed [_SB_.PCI0.OVGA.DD03._BQC]
+klog            (Node ffff8800b7e3c6c0), AE_ALREADY_EXISTS
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 17.125601] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 17.125601] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] eee27810
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 17.125618] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DSM] (Node f7431fa8),
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 17.125618] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DSM] (Node f7431fa8),
 klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 17.125669] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 17.125669] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] eee27780
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 17.125690] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node
-klog            f7445c78), AE_AML_OPERAND_TYPE (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 17.125690] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node f7445c78),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 17.802564] ACPI Error: Method parse
-klog            /execution failed [_SB_.WMID.HWMC] (Node ffff8801ffc5c078)
-klog            , AE_AML_BUFFER_LIMIT (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 17.802564] ACPI Error: Method parse/execution
+klog            failed [_SB_.WMID.HWMC] (Node ffff8801ffc5c078),
+klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 17.802574] ACPI Error: Method parse
-klog            /execution failed [_SB_.WMID.WMAD] (Node ffff8801ffc5c258)
-klog            , AE_AML_BUFFER_LIMIT (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 17.802574] ACPI Error: Method parse/execution
+klog            failed [_SB_.WMID.WMAD] (Node ffff8801ffc5c258),
+klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 17.847665] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node
-klog            f444ebe8), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 17.847665] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node f444ebe8),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 17.985672] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.IBCM] (Node ffff8800b3832600),
-klog            AE_AML_BUFFER_LIMIT
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 17.985672] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.IBCM] (Node
+klog            ffff8800b3832600), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 17.985723] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.GFX0.DD03._BCM] (Node ffff8800b382b840),
-klog            AE_AML_BUFFER_LIMIT
+klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
+klog            message: [ 17.985723] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node
+klog            ffff8800b382b840), AE_AML_BUFFER_LIMIT
 klog            
 klog            ADVICE: Method failed: ResourceSourceIndex is present but
 klog            ResourceSource is not.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 18.054842] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 18.054842] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff880133a777e0
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 18.054860] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.VGA_._DSM] (Node
-klog            ffff880137659190), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 18.054860] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.VGA_._DSM] (Node ffff880137659190),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 18.054909] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 18.054909] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff880133a776c0
 klog            (20110112/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 18.054932] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
-klog            ffff88013765d230), AE_AML_OPERAND_TYPE (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 18.054932] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013765d230),
+klog            AE_AML_OPERAND_TYPE (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 18.353938] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 18.353938] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node
 klog            ffff88013762f708), AE_ALREADY_EXISTS (20110112
 klog            /psparse-536)
@@ -14102,8 +14015,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 18.353954] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 18.353954] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node
 klog            ffff88013762f6e0), AE_ALREADY_EXISTS (20110112
 klog            /psparse-536)
@@ -14112,8 +14025,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 18.367485] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 18.367485] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node
 klog            ffff88013762f988), AE_ALREADY_EXISTS (20110112
 klog            /psparse-536)
@@ -14122,8 +14035,8 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 18.367501] ACPI Error: Method parse
+klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog            Kernel message: [ 18.367501] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node
 klog            ffff88013762f960), AE_ALREADY_EXISTS (20110112
 klog            /psparse-536)
@@ -14132,139 +14045,133 @@ klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 18.720899] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.GFX0._DOD] (Node f70206d8),
-klog            AE_AML_PACKAGE_LIMIT
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 18.720899] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog            f70206d8), AE_AML_PACKAGE_LIMIT
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 19.086127] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.ECDV.ECR1] (Node f702e6a8), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 19.086127] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
+klog            f702e6a8), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 19.086176] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECRB] (Node
-klog            f702e780), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 19.086176] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECRB] (Node f702e780), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 19.086202] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [EC0A] (Node
-klog            f702e990), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 19.086202] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [EC0A] (Node f702e990), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 19.086228] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.AMW0._WED] (Node f7019fd8), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 19.086228] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.AMW0._WED] (Node f7019fd8),
+klog            AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 19.408610] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DOD] (Node f74256a8),
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 19.408610] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DOD] (Node f74256a8),
 klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 20.135790] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 20.135790] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88023b491318
 klog            (20110316/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 20.135804] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DSM] (Node
-klog            ffff88023ec61eb0), AE_AML_OPERAND_TYPE (20110316
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 20.135804] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DSM] (Node ffff88023ec61eb0),
+klog            AE_AML_OPERAND_TYPE (20110316/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 20.135849] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 20.135849] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff88023b491708
 klog            (20110316/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 20.135864] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node
-klog            ffff88023ec77668), AE_AML_OPERAND_TYPE (20110316
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 20.135864] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node ffff88023ec77668),
+klog            AE_AML_OPERAND_TYPE (20110316/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 20.149010] ACPI Error: Needed [Integer/String/Buffer],
-klog            found [Package] f741ed48 (20100428/exresop-422)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 20.149010] ACPI Error: Needed [Integer/String
+klog            /Buffer], found [Package] f741ed48 (20100428/exresop-422)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 20.149032] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.P0P2.PEGP.LCD_._BQC] (Node f741f978),
-klog            AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 20.149032] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.P0P2.PEGP.LCD_._BQC]
+klog            (Node f741f978), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningErrorEvaluating: Test 1, HIGH
+klog            FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
 klog            Kernel message: [ 20.149063] ACPI Warning: Evaluating _BQC
 klog            failed (20100428/video-651)
 klog            
 klog            ADVICE: Executing the ACPI Method leaded in an execution
 klog            failure. This needs investigating.
 klog            
-klog            FAILED [HIGH] KlogFirmwareBugBCQIsUsed: Test 1, HIGH
-klog            Kernel message: [ 20.298134] [Firmware Bug]: _BCQ is used
-klog            instead of _BQC
+klog            FAILED [HIGH] KlogAcpiBcqInsteadOfBqc: Test 1, HIGH Kernel
+klog            message: [ 20.298134] [Firmware Bug]: _BCQ is used instead
+klog            of _BQC
 klog            
 klog            ADVICE: ACPI Method _BCQ was defined (typo) instead of
 klog            _BQC - this should be fixed.however the kernel has
 klog            detected this and is working around this typo.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
-klog            Kernel message: [ 20.342464] ACPI Warning: _BQC returned
-klog            an invalid level (20110413/video-473)
+klog            FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
+klog            HIGH Kernel message: [ 20.342464] ACPI Warning: _BQC
+klog            returned an invalid level (20110413/video-473)
 klog            
 klog            ADVICE: Method _BQC (Brightness Query Current) returned an
 klog            invalid display brightness level.
 klog            
-klog            FAILED [MEDIUM] KlogFirmwareBugDuplicateACPIVideo: Test 1,
+klog            FAILED [MEDIUM] KlogAcpiDuplicateAcpiVideoBus: Test 1,
 klog            MEDIUM Kernel message: [ 20.435766] [Firmware Bug]:
 klog            Duplicate ACPI video bus devices for the same VGA
 klog            controller, please try module parameter
@@ -14275,89 +14182,84 @@ klog            ADVICE: Try video module parameter
 klog            video.allow_duplicates=1 if the current driver does't
 klog            work.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 20.634744] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 20.634744] ACPI Warning for
 klog            _SB_.PCI0.GFX0.DD02._BQC: Return type mismatch - found
 klog            Reference, expected Integer (20100428/nspredef-1053)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 21.460488] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.GFX0._DOD] (Node
-klog            ffff880133632c80), AE_AML_PACKAGE_LIMIT (20110112
-klog            /psparse-536)
+klog            FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
+klog            message: [ 21.460488] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.GFX0._DOD] (Node ffff880133632c80),
+klog            AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 21.562484] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 21.562484] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] f7260370
 klog            (20090903/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 21.562496] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.GFX0.DD02.GBQC] (Node f7017a68),
-klog            AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 21.562496] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
+klog            f7017a68), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 21.562544] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.GFX0.DD02._BQC] (Node f7017a50),
-klog            AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 21.562544] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
+klog            f7017a50), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 22.154348] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.ECDV.ECR1] (Node f74276a8), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 22.154348] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
+klog            f74276a8), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 22.154443] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECRB] (Node
-klog            f7427780), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 22.154443] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECRB] (Node f7427780), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 22.154516] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECG5] (Node
-klog            f7427828), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 22.154516] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECG5] (Node f7427828), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 22.154587] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.AC__._PSR] (Node f7427c18), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 22.154587] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.AC__._PSR] (Node f7427c18),
+klog            AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogDefinesDODButNot: Test 1, HIGH Kernel
+klog            FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
 klog            message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines
 klog            _DOD but not _DOS
 klog            
@@ -14366,174 +14268,161 @@ klog            to display adapter) is defined but we should also have
 klog            _DOS (Enable/Disable output switching) defined but it's
 klog            been omitted. This can cause display switching issues.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorNeededBufferString: Test 1,
-klog            HIGH Kernel message: [ 25.859931] ACPI Error: Needed
+klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
+klog            1, HIGH Kernel message: [ 25.859931] ACPI Error: Needed
 klog            [Buffer/String/Package], found [Integer] ffff880139af5240
 klog            (20090903/exresop-590)
 klog            
 klog            ADVICE: An ACPI Method has returned an Integer type when a
 klog            Buffer, String or Package was expected.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 25.859949] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.VGA_._DSM] (Node ffff88013ba4c0e0),
-klog            AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 25.859949] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node
+klog            ffff88013ba4c0e0), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 25.860025] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013ba4da80),
-klog            AE_AML_OPERAND_TYPE
+klog            FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
+klog            message: [ 25.860025] ACPI Error (psparse-0537): Method
+klog            parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
+klog            ffff88013ba4da80), AE_AML_OPERAND_TYPE
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIExceptionAETIMEReturnedByHandler:
-klog            Test 1, HIGH Kernel message: [ 26.653079] ACPI Exception:
-klog            AE_TIME, Returned by Handler for [EmbeddedControl]
-klog            (20100428/evregion-474)
+klog            FAILED [HIGH] KlogAcpiRegionHandlerError: Test 1, HIGH
+klog            Kernel message: [ 26.653079] ACPI Exception: AE_TIME,
+klog            Returned by Handler for [EmbeddedControl] (20100428
+klog            /evregion-474)
 klog            
-klog            ADVICE: This is most probably caused by when a read or
-klog            write operation to the EC memory has failed because of a
-klog            timeout waiting for the Embedded Controller to complete
-klog            the transaction. Normally, the kernel waits for 500ms for
-klog            the Embedded Controller status port to indicate that a
-klog            transaction is complete, but in this case it has not and a
-klog            AE_TIME error has been returned. 
+klog            ADVICE: The ACPI driver detected an error returned by a
+klog            region handler.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 26.653190] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880226c54ce0),
-klog            AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 26.653190] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
+klog            ffff880226c54ce0), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 26.653252] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECRB] (Node
-klog            ffff880226c54e00), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 26.653252] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECRB] (Node ffff880226c54e00), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 26.653283] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECG5] (Node
-klog            ffff880226c54ee0), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 26.653283] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECG5] (Node ffff880226c54ee0), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 26.653307] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.AC__._PSR] (Node ffff880226c56420), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 26.653307] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.AC__._PSR] (Node ffff880226c56420)
+klog            , AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningBQCReturnedAn: Test 1, HIGH
-klog            Kernel message: [ 26.874386] ACPI Warning: _BQC returned
-klog            an invalid level (20090903/video-631)
+klog            FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
+klog            HIGH Kernel message: [ 26.874386] ACPI Warning: _BQC
+klog            returned an invalid level (20090903/video-631)
 klog            
 klog            ADVICE: Method _BQC (Brightness Query Current) returned an
 klog            invalid display brightness level.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 29.470614] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 29.470614] ACPI Warning for
 klog            _SB_.PCI0.GFX0.DD03._BQC: Return type mismatch - found
 klog            Reference, expected Integer (20100428/nspredef-1053)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 30.140339] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880217050ce0),
-klog            AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 30.140339] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
+klog            ffff880217050ce0), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 30.140421] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECRB] (Node
-klog            ffff880217050e00), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 30.140421] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECRB] (Node ffff880217050e00), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 30.140448] ACPI Error
-klog            (psparse-0537): Method parse/execution failed [ECG5] (Node
-klog            ffff880217050ee0), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 30.140448] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [ECG5] (Node ffff880217050ee0), AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 30.140475] ACPI Error
-klog            (psparse-0537): Method parse/execution failed
-klog            [_SB_.AC__._PSR] (Node ffff880217052420), AE_TIME
+klog            FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
+klog            : [ 30.140475] ACPI Error (psparse-0537): Method parse
+klog            /execution failed [_SB_.AC__._PSR] (Node ffff880217052420)
+klog            , AE_TIME
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIError: Test 1, HIGH Kernel message:
-klog            [ 42.490181] ACPI Error: [_SB_.VDRV] Namespace lookup
-klog            failure, AE_NOT_FOUND (20110112/psargs-359)
+klog            FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
+klog            message: [ 42.490181] ACPI Error: [_SB_.VDRV] Namespace
+klog            lookup failure, AE_NOT_FOUND (20110112/psargs-359)
 klog            
 klog            ADVICE: The kernel has most probably detected an error
 klog            while executing ACPI AML. The error lists the ACPI driver
 klog            module and the line number where the bug has been caught
 klog            and the method that caused the error.
 klog            
-klog            FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1,
-klog            HIGH Kernel message: [ 42.490202] ACPI Error: Method parse
-klog            /execution failed [_SB_.PCI0.LPC0.H_EC._Q51] (Node
-klog            ffff88003d9b1e60), AE_NOT_FOUND (20110112/psparse-536)
+klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
+klog            message: [ 42.490202] ACPI Error: Method parse/execution
+klog            failed [_SB_.PCI0.LPC0.H_EC._Q51] (Node ffff88003d9b1e60),
+klog            AE_NOT_FOUND (20110112/psparse-536)
 klog            
 klog            ADVICE: This is a bug picked up by the kernel, but as yet,
 klog            the firmware test suite has no diagnostic advice for this
 klog            particular problem.
 klog            
-klog            FAILED [HIGH] KlogACPIWarningReturnTypeMismatch: Test 1,
-klog            HIGH Kernel message: [ 44.661543] ACPI Warning for
+klog            FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
+klog            Kernel message: [ 44.661543] ACPI Warning for
 klog            _SB_.PCI0.GFX0.DD01._BCL: Return type mismatch - found
 klog            Integer, expected Package (20090903/nspredef-1006)
 klog            
 klog            ADVICE: The ACPI Method returned an incorrect type, this
 klog            should be fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 50.737630] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMI:
-klog            Excess arguments - needs 1, found 2 (20090903
-klog            /nspredef-303)
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 50.737630] ACPI Warning for
+klog            _SB_.PCI0.AGP_.VID_.MXMI: Excess arguments - needs 1,
+klog            found 2 (20090903/nspredef-303)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
 klog            
-klog            FAILED [HIGH] KlogACPIWarning: Test 1, HIGH Kernel message
-klog            : [ 50.737686] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMS:
-klog            Excess arguments - needs 1, found 2 (20090903
-klog            /nspredef-303)
+klog            FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
+klog            message: [ 50.737686] ACPI Warning for
+klog            _SB_.PCI0.AGP_.VID_.MXMS: Excess arguments - needs 1,
+klog            found 2 (20090903/nspredef-303)
 klog            
 klog            ADVICE: ACPI AML intepreter has found some non-conforming
 klog            AML code. This should be investigated and fixed.
diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log
index a49a9f3..6fe05cd 100644
--- a/klog-0001/klog-0002.log
+++ b/klog-0001/klog-0002.log
@@ -5,13 +5,12 @@ summary
 summary         Test Failure Summary
 summary         ==========================================================
 summary         
-summary         Critical failures: 35
+summary         Critical failures: 34
 summary          klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
 summary          klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20100428/tbxfroot-219)
 summary          klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20110112/tbxfroot-219)
 summary          klog: CRITICAL Kernel message: [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 1408MB of RAM.
 summary          klog: CRITICAL Kernel message: [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 4MB of RAM.
-summary          klog: CRITICAL Kernel message: [ 0.022719] ACPI Error: Found unknown opcode 0xFD at AML address f7ffe14c offset 0xE8, ignoring (20110112/psloop-141)
 summary          klog: CRITICAL Kernel message: [ 0.025446] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x00BE (20110112/psloop-526)
 summary          klog: CRITICAL Kernel message: [ 0.025463] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x00C3 (20110112/psloop-526)
 summary          klog: CRITICAL Kernel message: [ 0.042222] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x2366 (20100121/psloop-526)
@@ -42,7 +41,7 @@ summary          klog: CRITICAL Kernel message: [ 2.949708] ACPI Error: Field [C
 summary          klog: CRITICAL Kernel message: [ 2.949716] ACPI Error: Method parse/execution failed [_SB_._OSC] (Node ffff880297016ca8), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 summary          klog: CRITICAL Kernel message: [ 13.445954] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597)
 summary         
-summary         High failures: 1222
+summary         High failures: 1223
 summary          klog: HIGH Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
 summary          klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008018/0000000000008028, using 32 (20090903/tbfadt-427)
 summary          klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008020/0000000000008028, using 32 (20090903/tbfadt-427)
@@ -261,6 +260,7 @@ summary          klog: HIGH Kernel message: [ 0.000000] ACPI Warning: Optional f
 summary          klog: HIGH Kernel message: [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000820/0x0 (20100428/tbfadt-557)
 summary          klog: HIGH Kernel message: [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000820/0x0 (20110112/tbfadt-557)
 summary          klog: HIGH Kernel message: [ 0.000000] ACPI Warning (tbfadt-0460): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080926]
+summary          klog: HIGH Kernel message: [ 0.022719] ACPI Error: Found unknown opcode 0xFD at AML address f7ffe14c offset 0xE8, ignoring (20110112/psloop-141)
 summary          klog: HIGH Kernel message: [ 0.034090] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node ee025630), AE_ALREADY_EXISTS (20110112/psparse-536)
 summary          klog: HIGH Kernel message: [ 0.040119] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 400000)
 summary          klog: HIGH Kernel message: [ 0.045570] ACPI Warning: For _SB_.PCI0.LPCB.H_EC._GLK: Parameter count mismatch - ASL declared 1, ACPI requires 0 (20110112/nspredef-352)
-- 
1.8.0




More information about the fwts-devel mailing list