[Bug 1177772] Re: graphics fail to initialise correctly, in kvm with cirrus graphics
Marcus Tomlinson
marcus.tomlinson at canonical.com
Thu Mar 5 13:04:11 UTC 2020
This release of Ubuntu is no longer receiving maintenance updates. If
this is still an issue on a maintained version of Ubuntu please let us
know.
** Changed in: grub2 (Ubuntu)
Status: Confirmed => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to grub2 in Ubuntu.
https://bugs.launchpad.net/bugs/1177772
Title:
graphics fail to initialise correctly, in kvm with cirrus graphics
Status in grub2 package in Ubuntu:
Incomplete
Bug description:
Same problem as bug #1038055 but :
- On 13.04
- Without LUKS
- Not happening every boot
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-19-generic (buildd at allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:35:23 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=3619b708-877d-4c73-a2fa-f1ff871c7eee ro splash quiet elevator=deadline vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fffd000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1fffd max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] found SMP MP-table at [mem 0x000fdaf0-0x000fdaff] mapped at [ffff8800000fdaf0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x1fffcfff]
[ 0.000000] [mem 0x00000000-0x1fdfffff] page 2M
[ 0.000000] [mem 0x1fe00000-0x1fffcfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x1fffcfff @ [mem 0x1fffa000-0x1fffcfff]
[ 0.000000] RAMDISK: [mem 0x1e49b000-0x1f409fff]
[ 0.000000] ACPI: RSDP 00000000000fd990 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000001fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000001fffd9b0 02589 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 000000001fffff40 00040
[ 0.000000] ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000001fffd830 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001fffcfff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1fffcfff]
[ 0.000000] NODE_DATA [mem 0x1fff5000-0x1fff9fff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1fff1001, boot clock
[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001dc00000-ffff88001e3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffcfff]
[ 0.000000] On node 0 totalpages: 130954
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1984 pages used for memmap
[ 0.000000] DMA32 zone: 124989 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001fc00000 s85056 r8192 d21440 u2097152
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] kvm-clock: cpu 0, msr 0:1fff1001, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1fc0df40
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 128900
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=3619b708-877d-4c73-a2fa-f1ff871c7eee ro splash quiet elevator=deadline vt.handoff=7
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 483892k/524276k available (7006k kernel code, 460k absent, 39924k reserved, 6238k data, 992k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2199.998 MHz processor
[ 0.008000] Calibrating delay loop (skipped) preset value.. 4399.99 BogoMIPS (lpj=8799992)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] Security Framework initialized
[ 0.008000] AppArmor: AppArmor initialized
[ 0.008000] Yama: becoming mindful.
[ 0.008000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.008000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008000] Mount-cache hash table entries: 256
[ 0.008000] Initializing cgroup subsys cpuacct
[ 0.008000] Initializing cgroup subsys memory
[ 0.008000] Initializing cgroup subsys devices
[ 0.008000] Initializing cgroup subsys freezer
[ 0.008000] Initializing cgroup subsys blkio
[ 0.008000] Initializing cgroup subsys perf_event
[ 0.008000] Initializing cgroup subsys hugetlb
[ 0.008000] mce: CPU supports 10 MCE banks
[ 0.008000] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.008000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.008000] tlb_flushall_shift: 6
[ 0.025602] Freeing SMP alternatives: 24k freed
[ 0.033006] ACPI: Core revision 20121018
[ 0.034007] ftrace: allocating 26690 entries in 105 pages
[ 0.045282] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048003] smpboot: CPU0: Intel QEMU Virtual CPU version 1.0 (fam: 06, model: 02, stepping: 03)
[ 0.052000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
[ 0.052000] Brought up 1 CPUs
[ 0.052000] smpboot: Total of 1 processors activated (4399.99 BogoMIPS)
[ 0.052000] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.052000] devtmpfs: initialized
[ 0.052000] EVM: security.selinux
[ 0.052000] EVM: security.SMACK64
[ 0.052000] EVM: security.capability
[ 0.052000] regulator-dummy: no parameters
[ 0.052000] NET: Registered protocol family 16
[ 0.052000] ACPI: bus type pci registered
[ 0.052000] PCI: Using configuration type 1 for base access
[ 0.052077] bio: create slab <bio-0> at 0
[ 0.052232] ACPI: Added _OSI(Module Device)
[ 0.052234] ACPI: Added _OSI(Processor Device)
[ 0.052236] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.052237] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.052810] ACPI: EC: Look up EC in DSDT
[ 0.054326] ACPI: Interpreter enabled
[ 0.054329] ACPI: (supports S0 S3 S4 S5)
[ 0.054342] ACPI: Using IOAPIC for interrupt routing
[ 0.057834] ACPI: No dock devices found.
[ 0.057839] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.057854] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.057856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.058127] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.058129] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.058131] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.058134] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[ 0.058135] PCI: root bus 00: using default resources
[ 0.058138] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.058169] PCI host bridge to bus 0000:00
[ 0.058172] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.058174] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.058176] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
[ 0.058221] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.058517] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.058990] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.059417] pci 0000:00:01.1: reg 20: [io 0xc0a0-0xc0af]
[ 0.059671] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[ 0.060085] pci 0000:00:01.2: reg 20: [io 0xc040-0xc05f]
[ 0.060333] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.060703] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.060714] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.060862] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.068050] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
[ 0.072063] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
[ 0.078261] pci 0000:00:02.0: reg 30: [mem 0xfebd0000-0xfebdffff pref]
[ 0.078518] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.078693] pci 0000:00:03.0: reg 10: [io 0xc060-0xc07f]
[ 0.078811] pci 0000:00:03.0: reg 14: [mem 0xfebf1000-0xfebf1fff]
[ 0.080028] pci 0000:00:03.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.080295] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.082022] pci 0000:00:04.0: reg 10: [io 0xc000-0xc03f]
[ 0.083322] pci 0000:00:04.0: reg 14: [mem 0xfebf2000-0xfebf2fff]
[ 0.085160] pci 0000:00:05.0: [1af4:1002] type 00 class 0x050000
[ 0.085266] pci 0000:00:05.0: reg 10: [io 0xc080-0xc09f]
[ 0.086317] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.086324] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.087178] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.087276] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.087351] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.087423] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.087499] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 0.087912] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.088006] vgaarb: loaded
[ 0.088007] vgaarb: bridge control possible 0000:00:02.0
[ 0.088424] SCSI subsystem initialized
[ 0.088433] ACPI: bus type scsi registered
[ 0.088632] libata version 3.00 loaded.
[ 0.088685] ACPI: bus type usb registered
[ 0.088729] usbcore: registered new interface driver usbfs
[ 0.088742] usbcore: registered new interface driver hub
[ 0.088799] usbcore: registered new device driver usb
[ 0.089005] PCI: Using ACPI for IRQ routing
[ 0.089014] PCI: pci_cache_line_size set to 64 bytes
[ 0.089188] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.089193] e820: reserve RAM buffer [mem 0x1fffd000-0x1fffffff]
[ 0.089424] NetLabel: Initializing
[ 0.089427] NetLabel: domain hash size = 128
[ 0.089428] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.089452] NetLabel: unlabeled traffic allowed by default
[ 0.089616] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.089651] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.089657] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.094134] Switching to clocksource kvm-clock
[ 0.102426] AppArmor: AppArmor Filesystem Enabled
[ 0.102452] pnp: PnP ACPI init
[ 0.102466] ACPI: bus type pnp registered
[ 0.102605] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.102675] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.102730] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.102766] pnp 00:03: [dma 2]
[ 0.102790] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.102911] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.103014] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.103155] pnp: PnP ACPI: found 6 devices
[ 0.103156] ACPI: ACPI bus type pnp unregistered
[ 0.109448] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.109451] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
[ 0.109543] NET: Registered protocol family 2
[ 0.109778] TCP established hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.109852] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.109919] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.109990] TCP: reno registered
[ 0.110001] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.110015] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.110107] NET: Registered protocol family 1
[ 0.110129] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.110148] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.110168] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.110306] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.110416] pci 0000:00:02.0: Boot video device
[ 0.110455] PCI: CLS 0 bytes, default 64
[ 0.110530] Trying to unpack rootfs image as initramfs...
[ 0.438765] Freeing initrd memory: 15804k freed
[ 0.443179] Initialise module verification
[ 0.443247] audit: initializing netlink socket (disabled)
[ 0.443268] type=2000 audit(1368016367.440:1): initialized
[ 0.473654] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.475114] VFS: Disk quotas dquot_6.5.2
[ 0.475163] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.475745] fuse init (API version 7.20)
[ 0.475829] msgmni has been set to 976
[ 0.476418] Key type asymmetric registered
[ 0.476424] Asymmetric key parser 'x509' registered
[ 0.476470] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.476517] io scheduler noop registered
[ 0.476519] io scheduler deadline registered (default)
[ 0.476525] io scheduler cfq registered
[ 0.476634] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.476659] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.476731] efifb: probing for efifb
[ 0.476832] efifb: framebuffer at 0xfc000000, mapped to 0xffffc90000100000, using 1408k, total 1408k
[ 0.476834] efifb: mode is 800x600x24, linelength=2400, pages=1
[ 0.476837] efifb: scrolling: redraw
[ 0.476839] efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.479632] Console: switching to colour frame buffer device 100x37
[ 0.481746] fb0: EFI VGA frame buffer device
[ 0.481761] intel_idle: does not run on family 6 model 2
[ 0.481853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.481859] ACPI: Power Button [PWRF]
[ 0.483806] GHES: HEST is not enabled!
[ 0.484035] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.484097] virtio-pci 0000:00:03.0: setting latency timer to 64
[ 0.484283] virtio-pci 0000:00:04.0: setting latency timer to 64
[ 0.485388] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.485425] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 0.485592] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.507213] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.508612] Linux agpgart interface v0.103
[ 0.509994] brd: module loaded
[ 0.510720] loop: module loaded
[ 0.510928] virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.510949] virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X
[ 0.539541] vda: vda1 vda2 < vda5 >
[ 0.540550] ata_piix 0000:00:01.1: version 2.13
[ 0.540691] ata_piix 0000:00:01.1: setting latency timer to 64
[ 0.541111] scsi0 : ata_piix
[ 0.541192] scsi1 : ata_piix
[ 0.541224] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[ 0.541226] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[ 0.541498] libphy: Fixed MDIO Bus: probed
[ 0.541563] tun: Universal TUN/TAP device driver, 1.6
[ 0.541565] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 0.541969] virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
[ 0.541991] virtio-pci 0000:00:03.0: irq 43 for MSI/MSI-X
[ 0.542011] virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
[ 0.554962] PPP generic driver version 2.4.2
[ 0.555027] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.555029] ehci-pci: EHCI PCI platform driver
[ 0.555046] ehci-platform: EHCI generic platform driver
[ 0.555055] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.555067] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.555141] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 0.555153] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 0.555163] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 0.555279] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
[ 0.555376] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.555378] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.555380] usb usb1: Product: UHCI Host Controller
[ 0.555382] usb usb1: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 0.555386] usb usb1: SerialNumber: 0000:00:01.2
[ 0.555501] hub 1-0:1.0: USB hub found
[ 0.555506] hub 1-0:1.0: 2 ports detected
[ 0.555681] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.556422] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.556432] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.556555] mousedev: PS/2 mouse device common for all mice
[ 0.556860] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.557128] rtc_cmos 00:00: RTC can wake from S4
[ 0.557392] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.557502] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.557598] device-mapper: uevent: version 1.0.3
[ 0.557677] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel at redhat.com
[ 0.557685] cpuidle: using governor ladder
[ 0.557686] cpuidle: using governor menu
[ 0.557692] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.557695] EFI Variables Facility v0.08 2004-May-17
[ 0.557901] ashmem: initialized
[ 0.558059] TCP: cubic registered
[ 0.558207] NET: Registered protocol family 10
[ 0.558508] NET: Registered protocol family 17
[ 0.558532] Key type dns_resolver registered
[ 0.558724] Loading module verification certificates
[ 0.559741] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4fb521df0b0fa81f775431361b8076d5d0f1869a'
[ 0.559765] registered taskstats version 1
[ 0.562112] Key type trusted registered
[ 0.563932] Key type encrypted registered
[ 0.566122] rtc_cmos 00:00: setting system clock to 2013-05-08 12:32:46 UTC (1368016366)
[ 0.566210] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.566212] EDD information not available.
[ 0.708631] ata2.01: NODEV after polling detection
[ 0.708939] ata2.00: ATAPI: QEMU DVD-ROM, 1.0, max UDMA/100
[ 0.709420] ata2.00: configured for MWDMA2
[ 0.709914] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.0 PQ: 0 ANSI: 5
[ 0.710687] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 0.710694] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.710767] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.710821] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 0.712365] Freeing unused kernel memory: 992k freed
[ 0.712837] Write protecting the kernel read-only data: 12288k
[ 0.716238] Freeing unused kernel memory: 1176k freed
[ 0.719750] Freeing unused kernel memory: 1080k freed
[ 0.734582] udevd[91]: starting version 175
[ 0.864054] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 0.907216] Disabling lock debugging due to kernel taint
[ 0.931928] EXT4-fs (vda5): mounted filesystem with ordered data mode. Opts: (null)
[ 0.956665] FDC 0 is a S82078B
[ 1.204455] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[ 1.204459] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[ 1.204461] usb 1-1: Product: QEMU USB Tablet
[ 1.204463] usb 1-1: Manufacturer: QEMU 1.0
[ 1.204465] usb 1-1: SerialNumber: 42
[ 1.242688] usbcore: registered new interface driver usbhid
[ 1.242691] usbhid: USB HID core driver
[ 1.248929] input: QEMU 1.0 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
[ 1.249116] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 1.0 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 1.272287] vda: vda1 vda2 < vda5 >
[ 1.325675] EXT4-fs (vda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1.440055] tsc: Refined TSC clocksource calibration: 2199.952 MHz
[ 2.001277] Adding 498684k swap on /dev/vda1. Priority:-1 extents:1 across:498684k
[ 2.065213] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.093875] EXT4-fs (vda5): re-mounted. Opts: errors=remount-ro
[ 2.113902] udevd[386]: starting version 175
[ 2.226719] lp: driver loaded but no devices found
[ 2.490883] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[ 2.663069] [drm] Initialized drm 1.1.0 20060810
[ 2.696450] microcode: CPU0 sig=0x623, pf=0x0, revision=0x1
[ 2.819341] type=1400 audit(1368016368.746:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=539 comm="apparmor_parser"
[ 2.842188] checking generic (fc000000 160000) vs hw (fc000000 2000000)
[ 2.842191] fb: conflicting fb hw usage cirrusdrmfb vs EFI VGA - removing generic driver
[ 2.842226] Console: switching to colour dummy device 80x25
[ 2.854062] [drm:cirrus_vram_init] *ERROR* can't reserve VRAM
[ 2.854068] cirrus 0000:00:02.0: Fatal error during GPU init: -6
[ 2.854070] Trying to free nonexistent resource <00000000febf0000-00000000febf0fff>
[ 2.854073] Trying to free nonexistent resource <00000000fc000000-00000000fc3fffff>
[ 3.196097] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 3.624993] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 4.297925] EXT4-fs (vda5): resizing filesystem from 2496000 to 12981966 blocks
[ 4.397713] EXT4-fs (vda5): resized filesystem to 12981966
[ 4.878041] init: failsafe main process (927) killed by TERM signal
[ 5.038448] type=1400 audit(1368016370.966:3): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1009 comm="apparmor_parser"
[ 5.070396] type=1400 audit(1368016370.998:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1011 comm="apparmor_parser"
[ 5.623802] init: plymouth-upstart-bridge main process (1001) killed by TERM signal
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1177772/+subscriptions
More information about the foundations-bugs
mailing list