[Bug 1239515] [NEW] Saucy ubiquity crashes with kernel error

Erick Brunzell lbsolost at yahoo.com
Mon Oct 14 04:48:31 UTC 2013


Public bug reported:

This is actually just a follow up on bug #1220165 so it should probably
be marked as a duplicate, but this time I launched ubiquity from the
terminal with the command "ubiquity -d" in hopes that it might provide
more helpful info.

I'm testing on bare metal:

Intel Atom CPU  230 @ 1.60GHz
Intel 82945G/GZ Integrated Graphics Controller (rev 02)
Intel N10/ICH 7 Family High Definition Audio Controller (rev 01)
Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
2GB DDR2 RAM

The existing drive structure is a quite simple dual-boot of Lubuntu
Saucy i386 and Ubuntu GNOME Saucy i386 on a physical 80 GB drive:

ubuntu-gnome at ubuntu-gnome:~$ sudo parted -l
Model: ATA WDC WD800BB-63JK (scsi)
Disk /dev/sda: 80.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
 1      1049kB  39.7GB  39.7GB  primary   ext4            boot
 2      39.7GB  80.0GB  40.3GB  extended
 6      39.7GB  77.5GB  37.8GB  logical   ext4
 5      77.5GB  80.0GB  2525MB  logical   linux-swap(v1)


Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0
has been opened read-only.
Error: Can't have a partition outside the disk!                

I also decided this time to record the UUID's prior to trying the
install.

ubuntu-gnome at ubuntu-gnome:~$ sudo blkid -c /dev/null
/dev/loop0: TYPE="squashfs" 
/dev/sr0: LABEL="Ubuntu-GNOME 13.10 i386" TYPE="iso9660" 
/dev/sda1: UUID="9925ab08-025e-433b-be3e-b71703a99549" TYPE="ext4" 
/dev/sda5: UUID="846a1c94-cadb-499d-a5f8-6317e7e0b918" TYPE="swap" 
/dev/sda6: UUID="13cf3a15-45c3-4eef-bae7-6fa29a4a50b9" TYPE="ext4" 

When offered installation options I chose "Erase disk and install Ubuntu
GNOME" and shortly thereafter I was presented with that message about
the kernel not being informed of modifications, and this is what the new
drive/partition info is while ubiquity is still in a frozen state:

ubuntu-gnome at ubuntu-gnome:~$ sudo parted -l
Model: ATA WDC WD800BB-63JK (scsi)
Disk /dev/sda: 80.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
 1      1049kB  77.9GB  77.9GB  primary   ext4
 2      77.9GB  80.0GB  2136MB  extended
 5      77.9GB  80.0GB  2136MB  logical   linux-swap(v1)


Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0
has been opened read-only.
Error: Can't have a partition outside the disk!                           

ubuntu-gnome at ubuntu-gnome:~$ sudo blkid -c /dev/null
/dev/loop0: TYPE="squashfs" 
/dev/sr0: LABEL="Ubuntu-GNOME 13.10 i386" TYPE="iso9660" 
/dev/sda1: UUID="9925ab08-025e-433b-be3e-b71703a99549" TYPE="ext4" 
/dev/sda5: UUID="846a1c94-cadb-499d-a5f8-6317e7e0b918" TYPE="swap" 
/dev/sda6: UUID="13cf3a15-45c3-4eef-bae7-6fa29a4a50b9" TYPE="ext4" 

It's hard for me to read that until I get on another computer that's
tweaked for my limited vision so please give me time to review this.

Sorry to be so dense, I hope I didn't make too many typos, and apologies
if I'm only wasting electronic ink.

ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: ubiquity 2.15.23
ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3
Uname: Linux 3.11.0-12-generic i686
ApportVersion: 2.12.5-0ubuntu2
Architecture: i386
CasperVersion: 1.336ubuntu1
Date: Mon Oct 14 04:23:03 2013
InstallCmdLine: file=/cdrom/preseed/ubuntu-gnome.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
LiveMediaBuild: Ubuntu-GNOME 13.10 "Saucy Salamander" - Beta i386 (20131013)
MarkForUpload: True
ProcEnviron:
 TERM=xterm
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=<set>
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: ubiquity
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: ubiquity (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: apport-bug i386 saucy ubiquity-2.15.23 ubuntu-gnome

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to ubiquity in Ubuntu.
https://bugs.launchpad.net/bugs/1239515

Title:
  Saucy ubiquity crashes with kernel error

Status in “ubiquity” package in Ubuntu:
  New

Bug description:
  This is actually just a follow up on bug #1220165 so it should
  probably be marked as a duplicate, but this time I launched ubiquity
  from the terminal with the command "ubiquity -d" in hopes that it
  might provide more helpful info.

  I'm testing on bare metal:

  Intel Atom CPU  230 @ 1.60GHz
  Intel 82945G/GZ Integrated Graphics Controller (rev 02)
  Intel N10/ICH 7 Family High Definition Audio Controller (rev 01)
  Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
  2GB DDR2 RAM

  The existing drive structure is a quite simple dual-boot of Lubuntu
  Saucy i386 and Ubuntu GNOME Saucy i386 on a physical 80 GB drive:

  ubuntu-gnome at ubuntu-gnome:~$ sudo parted -l
  Model: ATA WDC WD800BB-63JK (scsi)
  Disk /dev/sda: 80.0GB
  Sector size (logical/physical): 512B/512B
  Partition Table: msdos

  Number  Start   End     Size    Type      File system     Flags
   1      1049kB  39.7GB  39.7GB  primary   ext4            boot
   2      39.7GB  80.0GB  40.3GB  extended
   6      39.7GB  77.5GB  37.8GB  logical   ext4
   5      77.5GB  80.0GB  2525MB  logical   linux-swap(v1)

  
  Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0
  has been opened read-only.
  Error: Can't have a partition outside the disk!                

  I also decided this time to record the UUID's prior to trying the
  install.

  ubuntu-gnome at ubuntu-gnome:~$ sudo blkid -c /dev/null
  /dev/loop0: TYPE="squashfs" 
  /dev/sr0: LABEL="Ubuntu-GNOME 13.10 i386" TYPE="iso9660" 
  /dev/sda1: UUID="9925ab08-025e-433b-be3e-b71703a99549" TYPE="ext4" 
  /dev/sda5: UUID="846a1c94-cadb-499d-a5f8-6317e7e0b918" TYPE="swap" 
  /dev/sda6: UUID="13cf3a15-45c3-4eef-bae7-6fa29a4a50b9" TYPE="ext4" 

  When offered installation options I chose "Erase disk and install
  Ubuntu GNOME" and shortly thereafter I was presented with that message
  about the kernel not being informed of modifications, and this is what
  the new drive/partition info is while ubiquity is still in a frozen
  state:

  ubuntu-gnome at ubuntu-gnome:~$ sudo parted -l
  Model: ATA WDC WD800BB-63JK (scsi)
  Disk /dev/sda: 80.0GB
  Sector size (logical/physical): 512B/512B
  Partition Table: msdos

  Number  Start   End     Size    Type      File system     Flags
   1      1049kB  77.9GB  77.9GB  primary   ext4
   2      77.9GB  80.0GB  2136MB  extended
   5      77.9GB  80.0GB  2136MB  logical   linux-swap(v1)

  
  Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0
  has been opened read-only.
  Error: Can't have a partition outside the disk!                           

  ubuntu-gnome at ubuntu-gnome:~$ sudo blkid -c /dev/null
  /dev/loop0: TYPE="squashfs" 
  /dev/sr0: LABEL="Ubuntu-GNOME 13.10 i386" TYPE="iso9660" 
  /dev/sda1: UUID="9925ab08-025e-433b-be3e-b71703a99549" TYPE="ext4" 
  /dev/sda5: UUID="846a1c94-cadb-499d-a5f8-6317e7e0b918" TYPE="swap" 
  /dev/sda6: UUID="13cf3a15-45c3-4eef-bae7-6fa29a4a50b9" TYPE="ext4" 

  It's hard for me to read that until I get on another computer that's
  tweaked for my limited vision so please give me time to review this.

  Sorry to be so dense, I hope I didn't make too many typos, and
  apologies if I'm only wasting electronic ink.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: ubiquity 2.15.23
  ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3
  Uname: Linux 3.11.0-12-generic i686
  ApportVersion: 2.12.5-0ubuntu2
  Architecture: i386
  CasperVersion: 1.336ubuntu1
  Date: Mon Oct 14 04:23:03 2013
  InstallCmdLine: file=/cdrom/preseed/ubuntu-gnome.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  LiveMediaBuild: Ubuntu-GNOME 13.10 "Saucy Salamander" - Beta i386 (20131013)
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=<set>
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: ubiquity
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1239515/+subscriptions



More information about the foundations-bugs mailing list