[Bug 536826] Re: Network Manager applet shows wrong wired interface name

[Thomas Hood]

@Roland, bujdi: Can you reproduce the problem in Ubuntu 12.04?

** Changed in: network-manager (Ubuntu)
       Status: Confirmed => Incomplete

** Summary changed:

- Network Manager applet shows wrong wired interface name
+ NetworkManager applet shows wrong wired interface name

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to udev in Ubuntu.
https://bugs.launchpad.net/bugs/536826

Title:
  NetworkManager applet shows wrong wired interface name

Status in “network-manager” package in Ubuntu:
  Incomplete
Status in “udev” package in Ubuntu:
  Invalid

Bug description:
  Binary package hint: network-manager

  I'm running an up-to-date Lucid system, and I just noticed the
  following glitch; I'm not sure which version it might have started in.
  In any case, I have a workstation with two Intel gigabit NICs on-
  board, and I'm using a Chelsio dual-port PCIe add-on board as my
  actual network interface.  To be precise:

  $ for i in $(seq 0 3); do echo; echo == eth$i ==; ethtool -i eth$i;
  done

  == eth0 ==
  driver: e1000e
  version: 1.0.2-k2
  firmware-version: 0.15-5
  bus-info: 0000:03:00.0

  == eth1 ==
  driver: e1000e
  version: 1.0.2-k2
  firmware-version: 0.5-7
  bus-info: 0000:04:00.0

  == eth2 ==
  driver: cxgb3
  version: 1.1.3-ko
  firmware-version: T 7.4.0 TP 1.1.0
  bus-info: 0000:06:00.0

  == eth3 ==
  driver: cxgb3
  version: 1.1.3-ko
  firmware-version: T 7.4.0 TP 1.1.0
  bus-info: 0000:06:00.0

  The actual port I am using is eth2 from the Chelsio cxgb3 NIC:

  $ ifconfig eth2
  eth2      Link encap:Ethernet  HWaddr 00:07:43:05:37:2d  
            inet addr:10.33.42.9  Bcast:10.33.42.255  Mask:255.255.255.0
            inet6 addr: 2001:420:4:e105:207:43ff:fe05:372d/64 Scope:Global
            inet6 addr: fe80::207:43ff:fe05:372d/64 Scope:Link
            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
            RX packets:18701 errors:0 dropped:0 overruns:0 frame:0
            TX packets:17444 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:6690318 (6.6 MB)  TX bytes:2824052 (2.8 MB)
            Interrupt:16 Memory:fafff000-faffffff 

  However, as the attached screenshot shows, the NM applet shows my
  active connection as being "Intel Corporation 82573L Gigabit Ethernet
  Controller" instead of as the Chelsio NIC as it should.

  Perhaps there's an issue because the Chelsio NIC has two separate
  ports/netdevs but only one PCI device??

  ProblemType: Bug
  Architecture: amd64
  CRDA: Error: [Errno 2] No such file or directory
  Date: Wed Mar 10 10:19:30 2010
  DistroRelease: Ubuntu 10.04
  Gconf:
   
  IpRoute:
   10.33.42.0/24 dev eth2  proto kernel  scope link  src 10.33.42.9  metric 1 
   169.254.0.0/16 dev eth2  scope link  metric 1000 
   default via 10.33.42.1 dev eth2  proto static
  Keyfiles: Error: [Errno 2] No such file or directory
  Package: network-manager 0.8-0ubuntu2
  ProcEnviron:
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcVersionSignature: Ubuntu 2.6.32-16.25-generic
  RfKill:
   
  SourcePackage: network-manager
  Uname: Linux 2.6.32-16-generic x86_64

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/536826/+subscriptions