Fwd: moving HD with 32bit Feisty from 64 bit motherboard to 32 bit motherboard

Gavin McCullagh gmccullagh at gmail.com
Sun Feb 24 22:57:06 GMT 2008


On Mon, 25 Feb 2008, Krsnendu dasa wrote:

> Extra info: I also have problems when my laptop is not turned on.

So, the laptop isn't the problem, but the problem exists between the laptop
and the server.  

> Thanks for this information. The messages I saw mostly yesterday were from
> the server .254 to my windows laptop .5 using ssh protocol.

Was the laptop plugged direct into the main switch or the secondary one?  

> I was using NX client to connect to FreeNX to connect to my server desktop
> through a wireless connection.

That's got to be several switches in between, right?

> The routing is as follows  Edubuntu Server (running FreeNX) -- Main
> Gigaswitch -- Secondary 100Mhz switch -- Wireless access point with 4 port
> switch (but only connected to the other switch; extra ports unused)--
> Windows laptop (running NX client software).

Could you try again, plugging the WAP into the Gigaswitch and see if we can
rule out the secondary switch?  Also plug the laptop direct into the
Gigaswitch and cut the WAP itself out.

You should be able to run tcpdump or wireshark on the server itself and
verify the checksums.  You can also run it on something plugged straight
into the main switch.  This will help you isolate further.


More information about the edubuntu-users mailing list