ltsp-build-client script hangs
Hasan Hasanov
hassanidin at gmail.com
Thu Oct 4 15:55:36 BST 2007
Hi,
The issue may indeed be in the X configuration. The xorg.conf for the
standalone and ltsp setup are different. I am attaching them.
I will replace the ltsp xorg.conf with the standalone one and see what
happens.
Hasan
On Thu, 2007-10-04 at 15:03 +0100, Gavin McCullagh wrote:
>
>
> On 04/10/2007, Hasan Hasanov <hassanidin at gmail.com> wrote:
>
>
> > What was the system before? LTSP5 has higher system
> requirements for
> > the thin client than LTSP4.
>
> The system is a Pentium III, 996 Mhz, 256 RAM.
>
> Besides the computer can support a stand alone version of
> Gutsy, it
> should have no problem running as a thin client.
>
> Fair enough :-) Presumably you didn't have to use any tricks to get
> it working with gutsy (eg installing proprietary video drivers,
> tweaking xorg, etc.).
>
> In that case, I'd say you might try setting the root password on the
> clients, logging in on the text terminal and looking at the logs
> in /var/log/ and perhaps the output of the command 'dmesg'. You
> could also have a look at the /etc/X11/xorg.conf and check if it was
> generated and if there's something wrong with it (comparison with the
> standalone might be interesting).
>
>
> Gavin
>
>
-------------- next part --------------
[ 0.000000] Linux version 2.6.22-12-386 (buildd at vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 Sun Sep 23 17:37:35 GMT 2007 (Ubuntu 2.6.22-12.39-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e5800 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
[ 0.000000] BIOS-e820: 000000000fef0000 - 000000000feffc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000000feffc00 - 000000000ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 254MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65264) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65264
[ 0.000000] HighMem 65264 -> 65264
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65264
[ 0.000000] On node 0 totalpages: 65264
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 477 pages used for memmap
[ 0.000000] Normal zone: 60691 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP 000F7380, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 0FEFCECE, 0028 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 0FEFFB8C, 0074 (r1 HP HPBDD_IP 6040000 PTL F4240)
[ 0.000000] ACPI: DSDT 0FEFCEF6, 2C96 (r1 INTEL Whitney 6040000 MSFT 100000B)
[ 0.000000] ACPI: FACS 0FEFFFC0, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
[ 0.000000] Built 1 zonelists. Total pages: 64755
[ 0.000000] Kernel command line: BOOT_IMAGE=vmlinuz ro initrd=initrd.img
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (01202000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 996.806 MHz processor.
[ 42.157399] Console: colour VGA+ 80x25
[ 42.159756] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 42.160244] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 42.183790] Memory: 250256k/261056k available (1930k kernel code, 10140k reserved, 875k data, 352k init, 0k highmem)
[ 42.183892] virtual kernel memory layout:
[ 42.183894] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB)
[ 42.183897] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 42.183900] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 42.183903] lowmem : 0xc0000000 - 0xcfef0000 ( 254 MB)
[ 42.183906] .init : 0xc03c0000 - 0xc0418000 ( 352 kB)
[ 42.183909] .data : 0xc02e2bd5 - 0xc03bda24 ( 875 kB)
[ 42.183912] .text : 0xc0100000 - 0xc02e2bd5 (1930 kB)
[ 42.184337] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 42.184548] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 42.264631] Calibrating delay using timer specific routine.. 1994.99 BogoMIPS (lpj=3989983)
[ 42.264786] Security Framework v1.0.0 initialized
[ 42.264855] SELinux: Disabled at boot.
[ 42.264920] Mount-cache hash table entries: 512
[ 42.265175] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 42.265194] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 42.265281] CPU: L2 cache: 256K
[ 42.265335] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 42.265353] Compat vDSO mapped to ffffe000.
[ 42.265431] CPU: Intel Pentium III (Coppermine) stepping 0a
[ 42.265579] Checking 'hlt' instruction... OK.
[ 42.281741] Early unpacking initramfs... done
[ 42.702096] ACPI: Core revision 20070126
[ 42.702351] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 42.704825] ACPI: setting ELCR to 0200 (from 0e20)
[ 42.706601] Booting paravirtualized kernel on bare hardware
[ 42.706790] Time: 17:24:41 Date: 09/04/107
[ 42.706913] NET: Registered protocol family 16
[ 42.707205] EISA bus registered
[ 42.707278] ACPI: bus type pci registered
[ 42.708276] PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1
[ 42.708335] PCI: Using configuration type 1
[ 42.708388] Setting up standard PCI resources
[ 42.715895] ACPI: EC: Look up EC in DSDT
[ 42.736893] ACPI: Interpreter enabled
[ 42.736961] ACPI: (supports S0 S1 S3 S4 S5)
[ 42.737208] ACPI: Using PIC for interrupt routing
[ 42.773926] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 42.774015] PCI: Probing PCI hardware (bus 00)
[ 42.774294] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 42.774356] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 42.774742] PCI: Transparent bridge - 0000:00:1e.0
[ 42.774827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 42.774965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 42.776794] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 42.777342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 42.777872] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 42.778401] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 42.778967] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 42.779051] pnp: PnP ACPI init
[ 42.779121] ACPI: bus type pnp registered
[ 42.837033] pnp: PnP ACPI: found 13 devices
[ 42.837101] ACPI: ACPI bus type pnp unregistered
[ 42.837161] PnPBIOS: Disabled by ACPI PNP
[ 42.837336] PCI: Using ACPI for IRQ routing
[ 42.837393] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 42.839417] NET: Registered protocol family 8
[ 42.839474] NET: Registered protocol family 20
[ 42.839666] pnp: 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
[ 42.840487] Time: tsc clocksource has been installed.
[ 42.870326] PCI: Bridge: 0000:00:1e.0
[ 42.870381] IO window: 2000-2fff
[ 42.870438] MEM window: ec100000-ec1fffff
[ 42.870495] PREFETCH window: 20000000-200fffff
[ 42.870566] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 42.870613] NET: Registered protocol family 2
[ 42.908528] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 42.908684] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 42.908948] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 42.909104] TCP: Hash tables configured (established 8192 bind 8192)
[ 42.909164] TCP reno registered
[ 42.920741] checking if image is initramfs... it is
[ 43.372409] Switched to high resolution mode on CPU 0
[ 43.711478] Freeing initrd memory: 4309k freed
[ 43.712421] audit: initializing netlink socket (disabled)
[ 43.712522] audit(1191518681.528:1): initialized
[ 43.717249] VFS: Disk quotas dquot_6.5.1
[ 43.717363] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 43.717718] io scheduler noop registered
[ 43.717777] io scheduler anticipatory registered
[ 43.717833] io scheduler deadline registered
[ 43.717939] io scheduler cfq registered (default)
[ 43.718019] Boot video device is 0000:00:02.0
[ 43.718440] isapnp: Scanning for PnP cards...
[ 44.072428] isapnp: No Plug & Play device found
[ 44.131347] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 44.131562] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 44.131955] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 44.133377] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 44.133932] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 44.135363] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 44.135967] input: Macintosh mouse button emulation as /class/input/input0
[ 44.136308] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 44.139946] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 44.140014] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 44.140485] mice: PS/2 mouse device common for all mice
[ 44.140754] EISA: Probing bus 0 at eisa.0
[ 44.140824] Cannot allocate resource for EISA slot 1
[ 44.140882] Cannot allocate resource for EISA slot 2
[ 44.140962] EISA: Detected 0 cards.
[ 44.141230] TCP cubic registered
[ 44.141315] NET: Registered protocol family 1
[ 44.141421] Using IPI Shortcut mode
[ 44.141780] Magic number: 11:501:440
[ 44.143181] Freeing unused kernel memory: 352k freed
[ 44.172142] input: AT Translated Set 2 keyboard as /class/input/input1
[ 44.468883] Capability LSM initialized
[ 44.476496] nbd: registered device at major 43
[ 44.486196] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher
[ 44.496941] Registering unionfs 2.1.4 (for 2.6.22.6)
[ 44.514371] ACPI: Invalid PBLK length [5]
[ 45.767337] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 45.767410] PCI: setting IRQ 5 as level-triggered
[ 45.767417] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 45.767600] 3c59x: Donald Becker and others.
[ 45.767661] 0000:01:04.0: 3Com PCI 3c905C Tornado at d081a000.
[ 45.840491] usbcore: registered new interface driver usbfs
[ 45.840602] usbcore: registered new interface driver hub
[ 45.840696] usbcore: registered new device driver usb
[ 45.843666] USB Universal Host Controller Interface driver v3.0
[ 45.854834] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 45.854909] PCI: setting IRQ 11 as level-triggered
[ 45.854915] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 45.855067] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 45.855074] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 45.855563] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 45.855686] uhci_hcd 0000:00:1f.2: irq 11, io base 0x00001820
[ 45.857229] usb usb1: configuration #1 chosen from 1 choice
[ 45.857355] hub 1-0:1.0: USB hub found
[ 45.857424] hub 1-0:1.0: 2 ports detected
[ 46.107678] NET: Registered protocol family 17
[ 46.109978] eth0: setting full-duplex.
[ 47.947479] unionfs: new lower inode mtime (bindex=0, name=log)
[ 49.134593] unionfs: new lower inode mtime (bindex=0, name=input)
[ 49.425143] parport_pc 00:0c: reported by Plug and Play ACPI
[ 49.425263] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 49.530951] lp0: using parport0 (interrupt-driven).
[ 51.081138] process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
[ 51.367699] Linux agpgart interface v0.102 (c) Dave Jones
[ 51.377361] agpgart: Detected an Intel i815 Chipset.
[ 51.387835] agpgart: AGP aperture is 64M @ 0xf0000000
[ 51.820843] Intel 82802 RNG detected
[ 51.861449] SCSI subsystem initialized
[ 51.973011] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 52.092713] libata version 2.21 loaded.
[ 52.106819] i810_smbus 0000:00:02.0: i810/i815 i2c device found.
[ 52.167042] ata_piix 0000:00:1f.1: version 2.11
[ 52.167184] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 52.167500] scsi0 : ata_piix
[ 52.167605] scsi1 : ata_piix
[ 52.167842] ata1: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011800 irq 14
[ 52.167850] ata2: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011808 irq 15
[ 52.195367] iTCO_vendor_support: vendor-support=0
[ 52.201871] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 52.201998] iTCO_wdt: Found a ICH TCO device (Version=1, TCOBASE=0x1060)
[ 52.202048] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 52.415276] input: PC Speaker as /class/input/input2
[ 52.641465] ata2.00: ATAPI: SR243T, L02G, max UDMA/33
[ 52.813425] ata2.00: configured for UDMA/33
[ 52.815184] scsi scan: INQUIRY result too short (5), using 36
[ 52.815197] scsi 1:0:0:0: Direct-Access PQ: 0 ANSI: 5
[ 52.815648] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 53.607892] Real Time Clock Driver v1.12ac
[ 53.628045] Floppy drive(s): fd0 is 1.44M
[ 53.647334] unionfs: new lower inode mtime (bindex=0, name=mouse)
[ 53.662974] FDC 0 is a National Semiconductor PC87306
[ 54.254744] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[ 54.254758] PCI: setting IRQ 9 as level-triggered
[ 54.254763] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 54.255154] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 54.314814] sd 1:0:0:0: [sda] Attached SCSI disk
[ 54.315143] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[ 54.476596] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 54.848537] intel8x0_measure_ac97_clock: measured 55568 usecs
[ 54.848552] intel8x0: clocking to 48000
[ 55.793594] NET: Registered protocol family 10
[ 55.793977] lo: Disabled Privacy Extensions
[ 55.921578] unionfs: saving rdstate with cookie 2 [1.663]
[ 55.954173] unionfs: saving rdstate with cookie 3 [1.663]
[ 55.976419] unionfs: saving rdstate with cookie 4 [1.663]
[ 55.985407] unionfs: saving rdstate with cookie 5 [1.663]
[ 55.987355] unionfs: saving rdstate with cookie 6 [1.663]
[ 56.017923] unionfs: saving rdstate with cookie 7 [1.663]
[ 56.041350] unionfs: saving rdstate with cookie 8 [1.663]
[ 56.054085] unionfs: saving rdstate with cookie 9 [1.663]
[ 56.062783] unionfs: saving rdstate with cookie 10 [1.663]
[ 56.079893] unionfs: saving rdstate with cookie 12 [1.663]
[ 56.106872] unionfs: saving rdstate with cookie 13 [1.663]
[ 56.114752] unionfs: saving rdstate with cookie 14 [1.663]
[ 56.123420] unionfs: saving rdstate with cookie 15 [1.663]
[ 56.154530] unionfs: saving rdstate with cookie 16 [1.663]
[ 56.156987] unionfs: saving rdstate with cookie 17 [1.663]
[ 56.194773] unionfs: saving rdstate with cookie 18 [1.663]
[ 56.217787] unionfs: saving rdstate with cookie 19 [1.663]
[ 56.231202] unionfs: saving rdstate with cookie 20 [1.663]
[ 56.240879] unionfs: saving rdstate with cookie 21 [1.663]
[ 56.276639] unionfs: saving rdstate with cookie 22 [1.663]
[ 56.302711] unionfs: saving rdstate with cookie 23 [1.663]
[ 56.314994] unionfs: saving rdstate with cookie 24 [1.663]
[ 56.330220] unionfs: saving rdstate with cookie 25 [1.663]
[ 56.379862] unionfs: saving rdstate with cookie 26 [1.663]
[ 56.390046] unionfs: saving rdstate with cookie 27 [1.663]
[ 56.398926] unionfs: saving rdstate with cookie 28 [1.663]
[ 56.415348] unionfs: saving rdstate with cookie 29 [1.663]
[ 56.436853] unionfs: saving rdstate with cookie 30 [1.663]
[ 56.450626] unionfs: saving rdstate with cookie 31 [1.663]
[ 56.519234] unionfs: saving rdstate with cookie 32 [1.663]
[ 56.530730] unionfs: saving rdstate with cookie 33 [1.663]
[ 56.622705] unionfs: saving rdstate with cookie 41 [1.663]
[ 56.641488] unionfs: saving rdstate with cookie 44 [1.663]
[ 56.645506] unionfs: saving rdstate with cookie 45 [1.663]
[ 59.575605] unionfs: saving rdstate with cookie 52 [1.663]
[ 66.640594] eth0: no IPv6 routers present
[ 77.649873] unionfs: new lower inode mtime (bindex=0, name=log)
[ 77.658302] unionfs: new lower inode mtime (bindex=0, name=log)
-------------- next part --------------
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
#DisplaySize 280 210 # mm
Identifier "Monitor0"
VendorName "GSM"
ModelName "500E"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 54.0
VertRefresh 50.0 - 120.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "i810"
VendorName "Intel Corporation"
BoardName "82815 CGC [Chipset Graphics Controller]"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
-------------- next part --------------
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation 82815 CGC [Chipset Graphics Controller]"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "500E"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82815 CGC [Chipset Graphics Controller]"
Monitor "500E"
DefaultDepth 24
SubSection "Display"
Modes "1024x768" "800x600" "720x450" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
More information about the edubuntu-users
mailing list