[ubuntu/zesty-proposed] nplan 0.29~17.04.1 (Accepted)

Mathieu Trudel-Lapierre cyphermox at ubuntu.com
Fri Oct 6 22:09:55 UTC 2017


nplan (0.29~17.04.1) zesty; urgency=medium

  * Backport netplan 0.29 to 17.04. (LP: #1713142)

nplan (0.29) artful; urgency=medium

  * Fix autopkgtests in a world where /run/NetworkManager/conf.d already
    exists. nplan is enabled by default, so it might well have the directory
    already created on the filesystem.

nplan (0.28) artful; urgency=medium

  * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
    broke default network config in LXD and was contrary to the defaults used
    by the kernel. Reopens LP: 1655440. (LP: #1717404)
  * Add "accept-ra:" key for all device types; this will default to OFF but
    allow users to disable processing Router Advertisements when required by
    their network setup. (LP: #1655440)

nplan (0.27) artful; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * Fix crash in systemd generator if called by an user on the command-line
  * coverage: fix exclusions to properly not cover our "never reached defaults"

  [ Dimitri John Ledkov ]
  * tests/integration.py: In teardown, stop systemd-networkd.socket.
  * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
    (LP: #1717471)
  * tests/integration.py: fix resolved detection.

nplan (0.26) artful; urgency=medium

  * Bonding:
    - Add support for specifying a primary slave. (LP: #1709135)
  * Rebind:
    - Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
      rebind. (LP: #1712224)
  * Autopkgtests:
    - Add allow-stderr. Systemd now bleats about a the networkd socket still
      being around and enabled when we restart the service; but we don't need
      to care since we're /restarting/ the service to load the new config.
    - Fix the autostart package to be more sensible: we don't really care if
      networkd autostarts or not, but we need to make sure that our generator
      will run at boot, so instead check the state, but only assert it once
      we've added a config file and before checking the state of our dummy
      device.
    - Do a bit more to make sure "mix" tests which stack virtual devices are
      as reliable as possible; by setting saner defaults.

nplan (0.25) artful; urgency=medium

  * tests/generate.py: add a test to validate that correct blacklist entries
    are added when creating virtual devices.
  * tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
    the remaining interface and udev configuration can confuse NetworkManager
    now that it seems to manage random devices it did not create again.
    (LP: #1699371)
  * src/nm.c: set the MTU even though we also specify it in systemd-networkd
    for consumption by udev. NetworkManager will try to set it and might
    otherwise default to the wrong value.
  * src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
    same config, SLAAC), and don't have static addresses set. This should fix
    the cases where unconfigured devices still get an IPv6 address.
    (LP: #1655440)
  * src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not
    configured; this follows the same logic as setting IPv6AcceptRA=no in
    networkd, with the exception that NM does not currently disable RAs. When
    it does, an unconfigured device for IPv6 will truly be left with no config.

nplan (0.24) artful; urgency=medium

  * debian/control: set Priority to important to make sure we can get into
    minimal.

Date: Thu, 05 Oct 2017 14:05:02 -0400
Changed-By: Mathieu Trudel-Lapierre <cyphermox at ubuntu.com>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/+source/nplan/0.29~17.04.1
-------------- next part --------------
Format: 1.8
Date: Thu, 05 Oct 2017 14:05:02 -0400
Source: nplan
Binary: nplan
Architecture: source
Version: 0.29~17.04.1
Distribution: zesty
Urgency: medium
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Mathieu Trudel-Lapierre <cyphermox at ubuntu.com>
Description:
 nplan      - YAML network configuration abstraction for various backends
Launchpad-Bugs-Fixed: 1655440 1699371 1709135 1712224 1713142 1717404 1717471
Changes:
 nplan (0.29~17.04.1) zesty; urgency=medium
 .
   * Backport netplan 0.29 to 17.04. (LP: #1713142)
 .
 nplan (0.29) artful; urgency=medium
 .
   * Fix autopkgtests in a world where /run/NetworkManager/conf.d already
     exists. nplan is enabled by default, so it might well have the directory
     already created on the filesystem.
 .
 nplan (0.28) artful; urgency=medium
 .
   * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
     broke default network config in LXD and was contrary to the defaults used
     by the kernel. Reopens LP: 1655440. (LP: #1717404)
   * Add "accept-ra:" key for all device types; this will default to OFF but
     allow users to disable processing Router Advertisements when required by
     their network setup. (LP: #1655440)
 .
 nplan (0.27) artful; urgency=medium
 .
   [ Mathieu Trudel-Lapierre ]
   * Fix crash in systemd generator if called by an user on the command-line
   * coverage: fix exclusions to properly not cover our "never reached defaults"
 .
   [ Dimitri John Ledkov ]
   * tests/integration.py: In teardown, stop systemd-networkd.socket.
   * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
     (LP: #1717471)
   * tests/integration.py: fix resolved detection.
 .
 nplan (0.26) artful; urgency=medium
 .
   * Bonding:
     - Add support for specifying a primary slave. (LP: #1709135)
   * Rebind:
     - Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
       rebind. (LP: #1712224)
   * Autopkgtests:
     - Add allow-stderr. Systemd now bleats about a the networkd socket still
       being around and enabled when we restart the service; but we don't need
       to care since we're /restarting/ the service to load the new config.
     - Fix the autostart package to be more sensible: we don't really care if
       networkd autostarts or not, but we need to make sure that our generator
       will run at boot, so instead check the state, but only assert it once
       we've added a config file and before checking the state of our dummy
       device.
     - Do a bit more to make sure "mix" tests which stack virtual devices are
       as reliable as possible; by setting saner defaults.
 .
 nplan (0.25) artful; urgency=medium
 .
   * tests/generate.py: add a test to validate that correct blacklist entries
     are added when creating virtual devices.
   * tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
     the remaining interface and udev configuration can confuse NetworkManager
     now that it seems to manage random devices it did not create again.
     (LP: #1699371)
   * src/nm.c: set the MTU even though we also specify it in systemd-networkd
     for consumption by udev. NetworkManager will try to set it and might
     otherwise default to the wrong value.
   * src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
     same config, SLAAC), and don't have static addresses set. This should fix
     the cases where unconfigured devices still get an IPv6 address.
     (LP: #1655440)
   * src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not
     configured; this follows the same logic as setting IPv6AcceptRA=no in
     networkd, with the exception that NM does not currently disable RAs. When
     it does, an unconfigured device for IPv6 will truly be left with no config.
 .
 nplan (0.24) artful; urgency=medium
 .
   * debian/control: set Priority to important to make sure we can get into
     minimal.
Checksums-Sha1:
 f4e870e06266cf1f1f7df8d09c4f636a9ad18a54 1755 nplan_0.29~17.04.1.dsc
 46c633fa2851317da65151ddbcaceae403885be1 71936 nplan_0.29~17.04.1.tar.gz
 4b8d243e2c03f896dd3ab8df0158682b3a2d06af 7919 nplan_0.29~17.04.1_source.buildinfo
Checksums-Sha256:
 a842c2c49e1b37863e2765da74fd14428cfeaa14bd3d18d43965e46eb62a0de7 1755 nplan_0.29~17.04.1.dsc
 40065746b053ab3a294193895a8fd40d5578f5b73e667dd99f485b52f6da380c 71936 nplan_0.29~17.04.1.tar.gz
 035bf0318a6dce89ee3dc248824fbae3670a2e004631e77b168a4417f73c1c1b 7919 nplan_0.29~17.04.1_source.buildinfo
Files:
 a7aea742a7c75dd0e66f63bdb7d24f39 1755 net important nplan_0.29~17.04.1.dsc
 8b74e908e2d8900c986f596852439c7c 71936 net important nplan_0.29~17.04.1.tar.gz
 fded695de8c5d60988d2d530db397aff 7919 net important nplan_0.29~17.04.1_source.buildinfo


More information about the Zesty-changes mailing list