[ubuntu/zesty-proposed] nut 2.7.4-5ubuntu1 (Accepted)

Louis Bouchard louis.bouchard at ubuntu.com
Thu Feb 16 18:38:39 UTC 2017


nut (2.7.4-5ubuntu1) zesty; urgency=medium

  * Merge with Debian; remaining changes (LP: #1643618)
    - debian/control:
      + remove Build-Depends on libpowerman0-dev
      + remove nut-powerman-pdu
    - debian/nut-powerman-pdu.{install,manpages}: dropped for now
    - debian/nut-{cgi,server}.postinst: fix 'adduser' logic to be
      unconditional, since adduser is guaranteed to be idempotent.
    - debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
      debian/rules: Install apport hooks for all top-level nut packages.
    - Disable systemd unit; it does not check nut.conf whether nut is
      configured, and thus fails to start (and the package install).  The
      init.d script works well enough for the time being.
    - debian/tests/test-nut.py:
      + In the CVE_2012_2944 test, give nut at most 5 seconds to shut down,
        instead of expecting it to be shut down immediately after sending the
        killall.
      + Additional indication on how to run tests for oneiric, precise to
        vivid and wily+
    - debian/tests/control : Fix dep8 test failures:
      + Drop python-unit from dep8 dependencies since the python-test
        package has now been removed. The unittest module has shipped with
        Python since 2.1.
      + Add dep8 test dependency on python, since Python 2 is required and
        is not necessarily installed by default any more.
  * Dropped changes:
    - Patch libtool.m4 and configure to support ppc64le. (Fixed upstream)
    - Remove unnecessary chmod 755 on files introduced by previous merge,
      assumed to be an error
    - debian/patches/0006-ups-conf-maxretry.patch: documentation tweaks
      (unnecessary Ubuntu delta). This was formerly listed as "Move maxretry
      setting above Examples section" but no longer did this at all.
  * Replace outdated indictions on how to run tests (Oneric, Precise, Vivid,
    Wily+) with proper indications for current version (Xenial+)

nut (2.7.4-5) unstable; urgency=medium

  * debian/control: Build-depends against asciidoc-dblatex, Recommends are not
    pulled automatically by the buildd (Closes: #851015)

nut (2.7.4-4) unstable; urgency=medium

  * debian/libnutclient0.symbols: Update the .symbols file, this should fix
    the FTBFS (Closes: #835703)
  * debian/nut-monitor.install: Install appdata file

nut (2.7.4-3) unstable; urgency=medium

  * debian/libnutclient0.symbols: Really add all the needed symbols (Closes:
    #831725)

nut (2.7.4-2) unstable; urgency=medium

  * debian/libnutclient0.symbols: Adjust .symbols file for arch specific C++
    symbols (Thanks to pkgkde tools)
  * Run wrap-and-sort
  * debian/control: Add systemd to the build-dependencies, we need the
    systemd.pc file to be installed during the build

nut (2.7.4-1) unstable; urgency=low

  [ Arnaud Quette ]
  * New upstream release (Closes: #806255)
  * debian/patches/series: remove 0007-killpower-path.patch
  * debian/control: add new packages libnutclient0 and libnutclient-dev
  * debian/rules: adapted for the new packages
  * debian/libnutclient0.install, debian/libnutclient0.symbols,
    debian/libnutclient-dev.install, debian/libnutclient-dev.manpages:
    created for the new packages

  [ Laurent Bigonville ]
  * debian/gbp.conf: Switch back the branch to the "debian" one
  * Drop d/p/0009-fix-favorites-permissions.patch, merged upstream
  * d/p/0002-nut-monitor-paths.patch, d/p/0006-ups-conf-maxretry.patch:
    Refreshed
  * debian/control: Bump Standards-Version to 3.9.8 (no further changes)
  * debian/control: Add dh-python to the build-dependencies
  * Bump debhelper compatibility to 9
  * d/p/0009-fix-nutshutdown-install.patch: Install the nutshutdown script in
    the correct path
  * debian/nut-server.install: 52-nut-usbups.rules file has been renamed to
    62-nut-usbups.rules
  * debian/libnutclient0.symbols, debian/libupsclient4.symbols: Adjust the
    .symbols files
  * debian/control: Use https:// URL's in Vcs-* fields
  * debian/nut-cgi.README.Debian: Fix typo
  * debian/control: Fix the grammar in nut-ipmi long description
  * Drop debian/nut-monitor.menu and debian/nut-monitor.xpm, not needed
    anymore per tech-ctte decision #741573
  * debian/rules: Enable hardening=+all

Date: Thu, 15 Dec 2016 15:30:05 +0100
Changed-By: Louis Bouchard <louis.bouchard at ubuntu.com>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Signed-By: Robie Basak <robie.basak at canonical.com>
https://launchpad.net/ubuntu/+source/nut/2.7.4-5ubuntu1
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Thu, 15 Dec 2016 15:30:05 +0100
Source: nut
Binary: nut nut-server nut-client nut-cgi nut-snmp nut-ipmi nut-xml nut-doc libupsclient4 libupsclient-dev libnutclient0 libnutclient-dev python-nut nut-monitor libups-nut-perl
Architecture: source
Version: 2.7.4-5ubuntu1
Distribution: zesty
Urgency: medium
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Louis Bouchard <louis.bouchard at ubuntu.com>
Description:
 libnutclient-dev - network UPS tools - development files
 libnutclient0 - network UPS tools - new client library
 libups-nut-perl - network UPS tools - Perl bindings for NUT server
 libupsclient-dev - network UPS tools - development files
 libupsclient4 - network UPS tools - client library
 nut        - network UPS tools - metapackage
 nut-cgi    - network UPS tools - web interface
 nut-client - network UPS tools - clients
 nut-doc    - network UPS tools - documentation
 nut-ipmi   - network UPS tools - IPMI driver
 nut-monitor - network UPS tools - GUI application to monitor UPS status
 nut-server - network UPS tools - core system
 nut-snmp   - network UPS tools - SNMP driver
 nut-xml    - network UPS tools - XML/HTTP driver
 python-nut - network UPS tools - Python bindings for NUT server
Closes: 806255 831725 835703 851015
Launchpad-Bugs-Fixed: 1643618
Changes:
 nut (2.7.4-5ubuntu1) zesty; urgency=medium
 .
   * Merge with Debian; remaining changes (LP: #1643618)
     - debian/control:
       + remove Build-Depends on libpowerman0-dev
       + remove nut-powerman-pdu
     - debian/nut-powerman-pdu.{install,manpages}: dropped for now
     - debian/nut-{cgi,server}.postinst: fix 'adduser' logic to be
       unconditional, since adduser is guaranteed to be idempotent.
     - debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
       debian/rules: Install apport hooks for all top-level nut packages.
     - Disable systemd unit; it does not check nut.conf whether nut is
       configured, and thus fails to start (and the package install).  The
       init.d script works well enough for the time being.
     - debian/tests/test-nut.py:
       + In the CVE_2012_2944 test, give nut at most 5 seconds to shut down,
         instead of expecting it to be shut down immediately after sending the
         killall.
       + Additional indication on how to run tests for oneiric, precise to
         vivid and wily+
     - debian/tests/control : Fix dep8 test failures:
       + Drop python-unit from dep8 dependencies since the python-test
         package has now been removed. The unittest module has shipped with
         Python since 2.1.
       + Add dep8 test dependency on python, since Python 2 is required and
         is not necessarily installed by default any more.
   * Dropped changes:
     - Patch libtool.m4 and configure to support ppc64le. (Fixed upstream)
     - Remove unnecessary chmod 755 on files introduced by previous merge,
       assumed to be an error
     - debian/patches/0006-ups-conf-maxretry.patch: documentation tweaks
       (unnecessary Ubuntu delta). This was formerly listed as "Move maxretry
       setting above Examples section" but no longer did this at all.
   * Replace outdated indictions on how to run tests (Oneric, Precise, Vivid,
     Wily+) with proper indications for current version (Xenial+)
 .
 nut (2.7.4-5) unstable; urgency=medium
 .
   * debian/control: Build-depends against asciidoc-dblatex, Recommends are not
     pulled automatically by the buildd (Closes: #851015)
 .
 nut (2.7.4-4) unstable; urgency=medium
 .
   * debian/libnutclient0.symbols: Update the .symbols file, this should fix
     the FTBFS (Closes: #835703)
   * debian/nut-monitor.install: Install appdata file
 .
 nut (2.7.4-3) unstable; urgency=medium
 .
   * debian/libnutclient0.symbols: Really add all the needed symbols (Closes:
     #831725)
 .
 nut (2.7.4-2) unstable; urgency=medium
 .
   * debian/libnutclient0.symbols: Adjust .symbols file for arch specific C++
     symbols (Thanks to pkgkde tools)
   * Run wrap-and-sort
   * debian/control: Add systemd to the build-dependencies, we need the
     systemd.pc file to be installed during the build
 .
 nut (2.7.4-1) unstable; urgency=low
 .
   [ Arnaud Quette ]
   * New upstream release (Closes: #806255)
   * debian/patches/series: remove 0007-killpower-path.patch
   * debian/control: add new packages libnutclient0 and libnutclient-dev
   * debian/rules: adapted for the new packages
   * debian/libnutclient0.install, debian/libnutclient0.symbols,
     debian/libnutclient-dev.install, debian/libnutclient-dev.manpages:
     created for the new packages
 .
   [ Laurent Bigonville ]
   * debian/gbp.conf: Switch back the branch to the "debian" one
   * Drop d/p/0009-fix-favorites-permissions.patch, merged upstream
   * d/p/0002-nut-monitor-paths.patch, d/p/0006-ups-conf-maxretry.patch:
     Refreshed
   * debian/control: Bump Standards-Version to 3.9.8 (no further changes)
   * debian/control: Add dh-python to the build-dependencies
   * Bump debhelper compatibility to 9
   * d/p/0009-fix-nutshutdown-install.patch: Install the nutshutdown script in
     the correct path
   * debian/nut-server.install: 52-nut-usbups.rules file has been renamed to
     62-nut-usbups.rules
   * debian/libnutclient0.symbols, debian/libupsclient4.symbols: Adjust the
     .symbols files
   * debian/control: Use https:// URL's in Vcs-* fields
   * debian/nut-cgi.README.Debian: Fix typo
   * debian/control: Fix the grammar in nut-ipmi long description
   * Drop debian/nut-monitor.menu and debian/nut-monitor.xpm, not needed
     anymore per tech-ctte decision #741573
   * debian/rules: Enable hardening=+all
Checksums-Sha1:
 17bb0acdf3d9715b16df9ec8b0e45fffa9b4ab3e 3250 nut_2.7.4-5ubuntu1.dsc
 a450382dbfaff2e1bdeefeda8d3c682a36a7fc72 2509831 nut_2.7.4.orig.tar.gz
 7ca6c233d9ec7be17ef626e7e4aed15b91eac668 58888 nut_2.7.4-5ubuntu1.debian.tar.xz
Checksums-Sha256:
 5f2d66fbe6ccd5adbe02e3cbddb9c3ed1e33666f2a2af568f02657294672bbb2 3250 nut_2.7.4-5ubuntu1.dsc
 980e82918c52d364605c0703a5dcf01f74ad2ef06e3d365949e43b7d406d25a7 2509831 nut_2.7.4.orig.tar.gz
 0d7cfe47c6f6e1a45d20c4920309ba82d77045fc0329ed1c53def12284bf87d4 58888 nut_2.7.4-5ubuntu1.debian.tar.xz
Files:
 9d118cbaf138e66fcfcc34ff486a4bc8 3250 admin optional nut_2.7.4-5ubuntu1.dsc
 3ba53656933d7471f95140b32a5b8d5c 2509831 admin optional nut_2.7.4.orig.tar.gz
 67b1f8a3423b26bcc313240e278af8b2 58888 admin optional nut_2.7.4-5ubuntu1.debian.tar.xz
Original-Maintainer: Arnaud Quette <aquette at debian.org>

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=cHON
-----END PGP SIGNATURE-----


More information about the Zesty-changes mailing list