[Bug 428923] [NEW] no support 8Gb ubuntu 64 bit. only 3,2Gb
snapux
snapux at gmail.com
Sun Sep 13 15:55:00 UTC 2009
Public bug reported:
Binary package hint: crash
[ 0.000000] BIOS EBDA/lowmem at: 0009d400/0009d400
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-15-generic (buildd at yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 19:25:34 UTC 2009 (Ubuntu 2.6.28-15.49-generic)
[ 0.000000] Command line: root=UUID=bae12ee9-abb0-46bb-8107-ca2bcf641f77 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x3ffffffff
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009d400 (usable)
[ 0.000000] modified: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] modified: 00000000cfe90000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfe90000 page 4k
[ 0.000000] kernel direct mapping tables up to cfe90000 @ 10000-16000
[ 0.000000] last_map_addr: cfe90000 end: cfe90000
[ 0.000000] RAMDISK: 37857000 - 37fefcb9
[ 0.000000] ACPI: RSDP 000F8010, 0014 (r0 MEDION)
[ 0.000000] ACPI: RSDT CFEE3000, 003C (r1 MEDION MEDIONAG 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP CFEE3080, 0074 (r1 MEDION MEDIONAG 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT CFEE3100, 475A (r1 MEDION AWRDACPI 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS CFE90000, 0040
[ 0.000000] ACPI: HPET CFEE7AC0, 0038 (r1 MEDION MEDIONAG 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG CFEE7B00, 003C (r1 MEDION MEDIONAG 42302E31 AWRD 0)
[ 0.000000] ACPI: SLIC CFEE7880, 0176 (r1 MEDION MEDIONAG 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC CFEE7A00, 0084 (r1 MEDION MEDIONAG 42302E31 AWRD 0)
[ 0.000000] ACPI: SSDT CFEE8460, 0380 (r1 PmRef CpuPm 3000 INTL 20041203)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00cfe90000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000b7bbb0] TEXT DATA BSS ==> [0000200000 - 0000b7bbb0]
[ 0.000000] #3 [0037857000 - 0037fefcb9] RAMDISK ==> [0037857000 - 0037fefcb9]
[ 0.000000] #4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] found SMP MP-table at [ffff8800000f3da0] 000f3da0
[ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff880001200000-ffff880003ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000cfe90
[ 0.000000] On node 0 totalpages: 851485
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2534 pages reserved
[ 0.000000] DMA zone: 1391 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11587 pages used for memmap
[ 0.000000] DMA32 zone: 835917 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 837308
[ 0.000000] Kernel command line: root=UUID=bae12ee9-abb0-46bb-8107-ca2bcf641f77 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2392.612 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] allocated 34078720 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 3300900k/3406400k available (4749k kernel code, 460k absent, 104488k reserved, 2523k data, 532k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4785.22 BogoMIPS (lpj=9570448)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20080926
[ 0.004000] ACPI: Checking initramfs for custom DSDT
[ 0.282949] Setting APIC routing to flat
[ 0.283303] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.322997] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.324001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4784.95 BogoMIPS (lpj=9569912)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.408558] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.408579] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.412110] Booting processor 2 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 4784.99 BogoMIPS (lpj=9569988)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.500558] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.500577] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.504081] Booting processor 3 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 4784.99 BogoMIPS (lpj=9569993)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.592528] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.592548] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.596026] Brought up 4 CPUs
[ 0.596028] Total of 4 processors activated (19140.17 BogoMIPS).
[ 0.596088] CPU0 attaching sched-domain:
[ 0.596090] domain 0: span 0-1 level MC
[ 0.596092] groups: 0 1
[ 0.596095] domain 1: span 0-3 level CPU
[ 0.596096] groups: 0-1 2-3
[ 0.596100] CPU1 attaching sched-domain:
[ 0.596102] domain 0: span 0-1 level MC
[ 0.596103] groups: 1 0
[ 0.596105] domain 1: span 0-3 level CPU
[ 0.596107] groups: 0-1 2-3
[ 0.596110] CPU2 attaching sched-domain:
[ 0.596111] domain 0: span 2-3 level MC
[ 0.596112] groups: 2 3
[ 0.596114] domain 1: span 0-3 level CPU
[ 0.596116] groups: 2-3 0-1
[ 0.596119] CPU3 attaching sched-domain:
[ 0.596120] domain 0: span 2-3 level MC
[ 0.596122] groups: 3 2
[ 0.596124] domain 1: span 0-3 level CPU
[ 0.596125] groups: 2-3 0-1
[ 0.596227] net_namespace: 1400 bytes
[ 0.596227] Booting paravirtualized kernel on bare hardware
[ 0.596252] Time: 14:54:30 Date: 09/13/09
[ 0.596252] regulator: core version 0.5
[ 0.596252] NET: Registered protocol family 16
[ 0.596252] ACPI: bus type pci registered
[ 0.596252] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.596252] PCI: MCFG area at e0000000 reserved in E820
[ 0.605551] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.605553] PCI: Using configuration type 1 for base access
[ 0.606095] ACPI: EC: Look up EC in DSDT
[ 0.612446] ACPI: Interpreter enabled
[ 0.612453] ACPI: (supports S0 S3 S4 S5)
[ 0.612469] ACPI: Using IOAPIC for interrupt routing
[ 0.616745] ACPI: No dock devices found.
[ 0.616759] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.616846] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.616849] pci 0000:00:01.0: PME# disabled
[ 0.616901] pci 0000:00:19.0: reg 10 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.616907] pci 0000:00:19.0: reg 14 32bit mmio: [0xfdfff000-0xfdffffff]
[ 0.616912] pci 0000:00:19.0: reg 18 io port: [0xff00-0xff1f]
[ 0.616932] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.616935] pci 0000:00:19.0: PME# disabled
[ 0.616977] pci 0000:00:1a.0: reg 20 io port: [0xfe00-0xfe1f]
[ 0.617029] pci 0000:00:1a.1: reg 20 io port: [0xfd00-0xfd1f]
[ 0.617082] pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f]
[ 0.617126] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff]
[ 0.617158] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.617161] pci 0000:00:1a.7: PME# disabled
[ 0.617191] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff]
[ 0.617215] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.617218] pci 0000:00:1b.0: PME# disabled
[ 0.617255] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.617258] pci 0000:00:1c.0: PME# disabled
[ 0.617298] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.617301] pci 0000:00:1c.4: PME# disabled
[ 0.617347] pci 0000:00:1d.0: reg 20 io port: [0xfb00-0xfb1f]
[ 0.617399] pci 0000:00:1d.1: reg 20 io port: [0xfa00-0xfa1f]
[ 0.617451] pci 0000:00:1d.2: reg 20 io port: [0xf900-0xf91f]
[ 0.617495] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffd000-0xfdffd3ff]
[ 0.617527] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.617530] pci 0000:00:1d.7: PME# disabled
[ 0.617623] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.617626] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.617661] pci 0000:00:1f.2: reg 10 io port: [0xf800-0xf807]
[ 0.617666] pci 0000:00:1f.2: reg 14 io port: [0xf700-0xf703]
[ 0.617671] pci 0000:00:1f.2: reg 18 io port: [0xf600-0xf607]
[ 0.617675] pci 0000:00:1f.2: reg 1c io port: [0xf500-0xf503]
[ 0.617679] pci 0000:00:1f.2: reg 20 io port: [0xf400-0xf40f]
[ 0.617684] pci 0000:00:1f.2: reg 24 io port: [0xf300-0xf30f]
[ 0.617713] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffc000-0xfdffc0ff]
[ 0.617725] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.617759] pci 0000:00:1f.5: reg 10 io port: [0xf100-0xf107]
[ 0.617764] pci 0000:00:1f.5: reg 14 io port: [0xf000-0xf003]
[ 0.617768] pci 0000:00:1f.5: reg 18 io port: [0xef00-0xef07]
[ 0.617773] pci 0000:00:1f.5: reg 1c io port: [0xee00-0xee03]
[ 0.617777] pci 0000:00:1f.5: reg 20 io port: [0xed00-0xed0f]
[ 0.617782] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f]
[ 0.617820] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.617828] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.617835] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.617840] pci 0000:01:00.0: reg 24 io port: [0xaf00-0xaf7f]
[ 0.617845] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.617884] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
[ 0.617886] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.617890] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.617922] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.617925] pci 0000:00:1c.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.617929] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
[ 0.617969] pci 0000:03:00.0: reg 10 io port: [0xcf00-0xcf07]
[ 0.617976] pci 0000:03:00.0: reg 14 io port: [0xce00-0xce03]
[ 0.617983] pci 0000:03:00.0: reg 18 io port: [0xcd00-0xcd07]
[ 0.617990] pci 0000:03:00.0: reg 1c io port: [0xcc00-0xcc03]
[ 0.617997] pci 0000:03:00.0: reg 20 io port: [0xcb00-0xcb0f]
[ 0.618003] pci 0000:03:00.0: reg 24 32bit mmio: [0xfd9ff000-0xfd9ff3ff]
[ 0.618020] pci 0000:03:00.0: supports D1
[ 0.618021] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.618025] pci 0000:03:00.0: PME# disabled
[ 0.618064] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 0.618067] pci 0000:00:1c.4: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
[ 0.618072] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
[ 0.618104] pci 0000:04:02.0: reg 10 32bit mmio: [0xfdcff000-0xfdcff7ff]
[ 0.618110] pci 0000:04:02.0: reg 14 io port: [0xbf00-0xbf7f]
[ 0.618140] pci 0000:04:02.0: supports D2
[ 0.618141] pci 0000:04:02.0: PME# supported from D2 D3hot D3cold
[ 0.618145] pci 0000:04:02.0: PME# disabled
[ 0.618182] pci 0000:00:1e.0: transparent bridge
[ 0.618185] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[ 0.618188] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.618193] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.618207] bus 00 -> node 0
[ 0.618212] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.618431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.618524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.618614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.633757] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.633864] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.633971] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.634076] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.634180] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.634285] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.634389] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.634496] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.634641] ACPI: WMI: Mapper loaded
[ 0.634680] SCSI subsystem initialized
[ 0.634680] libata version 3.00 loaded.
[ 0.634680] usbcore: registered new interface driver usbfs
[ 0.634680] usbcore: registered new interface driver hub
[ 0.634680] usbcore: registered new device driver usb
[ 0.634680] PCI: Using ACPI for IRQ routing
[ 0.648012] Bluetooth: Core ver 2.13
[ 0.648028] NET: Registered protocol family 31
[ 0.648028] Bluetooth: HCI device and connection manager initialized
[ 0.648028] Bluetooth: HCI socket layer initialized
[ 0.648028] NET: Registered protocol family 8
[ 0.648028] NET: Registered protocol family 20
[ 0.648039] NetLabel: Initializing
[ 0.648041] NetLabel: domain hash size = 128
[ 0.648043] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.648057] NetLabel: unlabeled traffic allowed by default
[ 0.648108] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.648112] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.656066] AppArmor: AppArmor Filesystem Enabled
[ 0.660009] Switched to high resolution mode on CPU 0
[ 0.660622] Switched to high resolution mode on CPU 1
[ 0.660847] Switched to high resolution mode on CPU 3
[ 0.660882] Switched to high resolution mode on CPU 2
[ 0.668033] pnp: PnP ACPI init
[ 0.668042] ACPI: bus type pnp registered
[ 0.670245] pnp: PnP ACPI: found 13 devices
[ 0.670247] ACPI: ACPI bus type pnp unregistered
[ 0.670253] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.670255] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.670257] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.670263] system 00:09: ioport range 0x400-0x4bf could not be reserved
[ 0.670268] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.670272] system 00:0c: iomem range 0xf0000-0xfffff could not be reserved
[ 0.670274] system 00:0c: iomem range 0xcff00000-0xcfffffff has been reserved
[ 0.670275] system 00:0c: iomem range 0xfed00000-0xfed000ff has been reserved
[ 0.670277] system 00:0c: iomem range 0xcfe90000-0xcfefffff could not be reserved
[ 0.670279] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.670281] system 00:0c: iomem range 0x100000-0xcfe8ffff could not be reserved
[ 0.670283] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.670285] system 00:0c: iomem range 0xfed14000-0xfed1dfff has been reserved
[ 0.670287] system 00:0c: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.670288] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.670290] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.670292] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.670294] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[ 0.674928] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.674930] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.674933] pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff
[ 0.674935] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.674939] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.674941] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.674945] pci 0000:00:1c.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.674948] pci 0000:00:1c.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
[ 0.674953] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.674955] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.674958] pci 0000:00:1c.4: MEM window: 0xfd900000-0xfd9fffff
[ 0.674961] pci 0000:00:1c.4: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.674966] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.674968] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 0.674972] pci 0000:00:1e.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.674975] pci 0000:00:1e.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.674985] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.674988] pci 0000:00:01.0: setting latency timer to 64
[ 0.674993] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.674996] pci 0000:00:1c.0: setting latency timer to 64
[ 0.675002] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.675005] pci 0000:00:1c.4: setting latency timer to 64
[ 0.675009] pci 0000:00:1e.0: setting latency timer to 64
[ 0.675012] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.675014] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.675015] bus: 01 index 0 io port: [0xa000-0xafff]
[ 0.675017] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
[ 0.675018] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.675019] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.675021] bus: 02 index 0 io port: [0xd000-0xdfff]
[ 0.675022] bus: 02 index 1 mmio: [0xfdd00000-0xfddfffff]
[ 0.675023] bus: 02 index 2 mmio: [0xfda00000-0xfdafffff]
[ 0.675025] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.675026] bus: 03 index 0 io port: [0xc000-0xcfff]
[ 0.675027] bus: 03 index 1 mmio: [0xfd900000-0xfd9fffff]
[ 0.675028] bus: 03 index 2 mmio: [0xfde00000-0xfdefffff]
[ 0.675030] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.675031] bus: 04 index 0 io port: [0xb000-0xbfff]
[ 0.675032] bus: 04 index 1 mmio: [0xfdc00000-0xfdcfffff]
[ 0.675034] bus: 04 index 2 mmio: [0xfdb00000-0xfdbfffff]
[ 0.675035] bus: 04 index 3 io port: [0x00-0xffff]
[ 0.675036] bus: 04 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.675043] NET: Registered protocol family 2
[ 0.708085] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.708431] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.709770] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.710179] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.710181] TCP reno registered
[ 0.720145] NET: Registered protocol family 1
[ 0.720255] checking if image is initramfs... it is
[ 1.516378] Freeing initrd memory: 7779k freed
[ 1.519216] audit: initializing netlink socket (disabled)
[ 1.519233] type=2000 audit(1252853670.516:1): initialized
[ 1.526154] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.527267] VFS: Disk quotas dquot_6.5.1
[ 1.527324] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.527773] fuse init (API version 7.10)
[ 1.527868] msgmni has been set to 6463
[ 1.528075] alg: No test for stdrng (krng)
[ 1.528095] io scheduler noop registered
[ 1.528097] io scheduler anticipatory registered
[ 1.528098] io scheduler deadline registered
[ 1.528130] io scheduler cfq registered (default)
[ 1.528267] pci 0000:01:00.0: Boot video device
[ 1.530805] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.530830] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.530847] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.530854] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.530865] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.530901] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.530927] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.530946] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.530955] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.530964] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.530974] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.531016] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.531043] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.531062] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X
[ 1.531071] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 1.531080] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 1.531088] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 1.531137] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.531327] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.531431] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.531433] ACPI: Power Button (FF) [PWRF]
[ 1.531467] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.531469] ACPI: Power Button (CM) [PWRB]
[ 1.531507] fan PNP0C0B:00: registered as cooling_device0
[ 1.531511] ACPI: Fan [FAN] (on)
[ 1.531897] ACPI: SSDT CFEE7B80, 022A (r1 PmRef Cpu0Ist 3000 INTL 20041203)
[ 1.532069] processor ACPI_CPU:00: registered as cooling_device1
[ 1.532273] ACPI: SSDT CFEE8040, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
[ 1.532432] processor ACPI_CPU:01: registered as cooling_device2
[ 1.532621] ACPI: SSDT CFEE81A0, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20041203)
[ 1.532780] processor ACPI_CPU:02: registered as cooling_device3
[ 1.532969] ACPI: SSDT CFEE8300, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20041203)
[ 1.533126] processor ACPI_CPU:03: registered as cooling_device4
[ 1.535128] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.535203] ACPI: Thermal Zone [THRM] (22 C)
[ 1.561722] Linux agpgart interface v0.103
[ 1.561729] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.561833] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.562069] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.562644] brd: module loaded
[ 1.562879] loop: module loaded
[ 1.562930] Fixed MDIO Bus: probed
[ 1.562934] PPP generic driver version 2.4.2
[ 1.562976] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.562996] Driver 'sd' needs updating - please use bus_type methods
[ 1.563002] Driver 'sr' needs updating - please use bus_type methods
[ 1.563033] ahci 0000:03:00.0: version 3.0
[ 1.563060] ata_piix 0000:00:1f.2: version 2.12
[ 1.563071] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.563074] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.563102] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.563179] scsi0 : ata_piix
[ 1.563275] scsi1 : ata_piix
[ 1.563797] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 1.563800] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 1.890649] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.218649] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.218669] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.218672] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.218703] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.218750] scsi2 : ata_piix
[ 2.218819] scsi3 : ata_piix
[ 2.219128] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
[ 2.219131] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
[ 2.546632] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.874620] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.874910] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.874930] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 2.874990] scsi4 : pata_marvell
[ 2.875055] scsi5 : pata_marvell
[ 2.875093] ata5: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 16
[ 2.875095] ata6: PATA max UDMA/133 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 16
[ 3.044367] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-H44N, RK00, max UDMA/66
[ 3.045521] ata5.01: ATA-6: WDC WD1600LB-55EDA0, 15.05R15, max UDMA/100
[ 3.045524] ata5.01: 312581808 sectors, multi 0: LBA48
[ 3.060374] ata5.00: configured for UDMA/66
[ 3.077516] ata5.01: configured for UDMA/100
[ 3.300098] ata6.00: ATA-7: ST3160815AS, 3.AAA, max UDMA/133
[ 3.300100] ata6.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 3.375075] ata6.00: configured for UDMA/133
[ 3.375105] isa bounce pool size: 16 pages
[ 3.378500] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H44N RK00 PQ: 0 ANSI: 5
[ 3.390257] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.390261] Uniform CD-ROM driver Revision: 3.20
[ 3.390394] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.390438] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 3.390499] scsi 4:0:1:0: Direct-Access ATA WDC WD1600LB-55E 15.0 PQ: 0 ANSI: 5
[ 3.390571] sd 4:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.390584] sd 4:0:1:0: [sda] Write Protect is off
[ 3.390586] sd 4:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 3.390607] sd 4:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.390649] sd 4:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.390660] sd 4:0:1:0: [sda] Write Protect is off
[ 3.390662] sd 4:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 3.390682] sd 4:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.390685] sda: sda1 sda2 < sda5 >
[ 3.431422] sd 4:0:1:0: [sda] Attached SCSI disk
[ 3.431452] sd 4:0:1:0: Attached scsi generic sg1 type 0
[ 3.431501] scsi 5:0:0:0: Direct-Access ATA ST3160815AS 3.AA PQ: 0 ANSI: 5
[ 3.431563] sd 5:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.431574] sd 5:0:0:0: [sdb] Write Protect is off
[ 3.431576] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.431595] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.431632] sd 5:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.431643] sd 5:0:0:0: [sdb] Write Protect is off
[ 3.431644] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.431664] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.431666] sdb: sdb1
[ 3.448129] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 3.448177] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 3.448371] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.448395] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.448430] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.448433] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.448480] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.452373] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.452387] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
[ 3.468029] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.468096] usb usb1: configuration #1 chosen from 1 choice
[ 3.468127] hub 1-0:1.0: USB hub found
[ 3.468135] hub 1-0:1.0: 6 ports detected
[ 3.468233] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.468240] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.468243] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.468273] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.472178] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.472187] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
[ 3.484024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.484081] usb usb2: configuration #1 chosen from 1 choice
[ 3.484108] hub 2-0:1.0: USB hub found
[ 3.484114] hub 2-0:1.0: 6 ports detected
[ 3.484205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.484215] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.484234] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.484241] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.484243] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.484274] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.484294] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[ 3.484355] usb usb3: configuration #1 chosen from 1 choice
[ 3.484372] hub 3-0:1.0: USB hub found
[ 3.484377] hub 3-0:1.0: 2 ports detected
[ 3.484438] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.484442] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.484444] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.484474] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.484499] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
[ 3.484555] usb usb4: configuration #1 chosen from 1 choice
[ 3.484576] hub 4-0:1.0: USB hub found
[ 3.484580] hub 4-0:1.0: 2 ports detected
[ 3.484639] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.484643] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.484646] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.484683] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.484702] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
[ 3.484756] usb usb5: configuration #1 chosen from 1 choice
[ 3.484773] hub 5-0:1.0: USB hub found
[ 3.484778] hub 5-0:1.0: 2 ports detected
[ 3.484838] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.484843] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.484845] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.484874] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.484893] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[ 3.484945] usb usb6: configuration #1 chosen from 1 choice
[ 3.484963] hub 6-0:1.0: USB hub found
[ 3.484967] hub 6-0:1.0: 2 ports detected
[ 3.485028] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.485032] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.485034] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.485063] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.485082] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[ 3.485137] usb usb7: configuration #1 chosen from 1 choice
[ 3.485154] hub 7-0:1.0: USB hub found
[ 3.485159] hub 7-0:1.0: 2 ports detected
[ 3.485220] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.485225] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.485227] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.485258] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.485277] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[ 3.485330] usb usb8: configuration #1 chosen from 1 choice
[ 3.485349] hub 8-0:1.0: USB hub found
[ 3.485353] hub 8-0:1.0: 2 ports detected
[ 3.485449] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.485451] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.485963] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.496565] mice: PS/2 mouse device common for all mice
[ 3.532587] rtc_cmos 00:04: RTC can wake from S4
[ 3.532627] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.532651] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.532711] device-mapper: uevent: version 1.0.3
[ 3.532817] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel at redhat.com
[ 3.532972] device-mapper: multipath: version 1.0.5 loaded
[ 3.532974] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.533148] cpuidle: using governor ladder
[ 3.533150] cpuidle: using governor menu
[ 3.533478] TCP cubic registered
[ 3.533531] NET: Registered protocol family 10
[ 3.533836] lo: Disabled Privacy Extensions
[ 3.534046] NET: Registered protocol family 17
[ 3.534060] Bluetooth: L2CAP ver 2.11
[ 3.534061] Bluetooth: L2CAP socket layer initialized
[ 3.534063] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.534064] Bluetooth: SCO socket layer initialized
[ 3.534111] Bluetooth: RFCOMM socket layer initialized
[ 3.534119] Bluetooth: RFCOMM TTY layer initialized
[ 3.534120] Bluetooth: RFCOMM ver 1.10
[ 3.534941] registered taskstats version 1
[ 3.535050] Magic number: 9:370:940
[ 3.535121] rtc_cmos 00:04: setting system clock to 2009-09-13 14:54:33 UTC (1252853673)
[ 3.535123] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.535124] EDD information not available.
[ 3.535154] Freeing unused kernel memory: 532k freed
[ 3.535295] Write protecting the kernel read-only data: 6688k
[ 3.551329] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.658888] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 3.658890] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.658937] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.658946] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.659042] e1000e 0000:00:19.0: irq 2300 for MSI/MSI-X
[ 3.722868] ohci1394 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.722877] ohci1394 0000:04:02.0: setting latency timer to 64
[ 3.774581] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fdcff000-fdcff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.864233] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:92:22:ed:17
[ 3.864236] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.864273] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff
[ 3.904067] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 4.023702] PM: Starting manual resume from disk
[ 4.023705] PM: Resume from partition 8:5
[ 4.023706] PM: Checking hibernation image.
[ 4.023874] PM: Resume from disk failed.
[ 4.062992] kjournald starting. Commit interval 5 seconds
[ 4.063001] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.123616] usb 1-4: configuration #1 chosen from 1 choice
[ 4.416042] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 4.611347] usb 3-1: configuration #1 chosen from 1 choice
[ 4.852040] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 5.024313] usb 8-2: configuration #1 chosen from 1 choice
[ 5.052143] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0001394dea]
[ 10.798250] udev: starting version 141
[ 11.041533] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 11.568264] nvidia: module license 'NVIDIA' taints kernel.
[ 11.820129] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.820137] nvidia 0000:01:00.0: setting latency timer to 64
[ 11.820538] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.44 Tue Mar 24 05:46:32 PST 2009
[ 12.099213] iTCO_vendor_support: vendor-support=0
[ 12.100613] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 12.100737] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0460)
[ 12.100805] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.156357] usbcore: registered new interface driver hiddev
[ 12.169219] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input5
[ 12.193124] generic-usb 0003:04F3:0212.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.2-2/input0
[ 12.193148] usbcore: registered new interface driver usbhid
[ 12.193170] usbhid: v2.6:USB HID core driver
[ 12.268210] Initializing USB Mass Storage driver...
[ 12.268295] scsi6 : SCSI emulation for USB Mass Storage devices
[ 12.268407] usbcore: registered new interface driver usb-storage
[ 12.268424] USB Mass Storage support registered.
[ 12.268427] usb-storage: device found at 3
[ 12.268428] usb-storage: waiting for device to settle before scanning
[ 12.339853] Linux video capture interface: v2.00
[ 12.375246] gspca: main v2.3.0 registered
[ 12.380133] gspca: probing 046d:0928
[ 12.439983] gspca: probe ok
[ 12.440004] usbcore: registered new interface driver spca561
[ 12.440020] spca561: registered
[ 12.601337] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.601418] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.634029] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 12.861369] lp: driver loaded but no devices found
[ 12.951140] Adding 6385796k swap on /dev/sda5. Priority:-1 extents:1 across:6385796k
[ 13.490512] EXT3 FS on sda1, internal journal
[ 14.602557] type=1505 audit(1252850084.565:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2117
[ 14.633688] type=1505 audit(1252850084.598:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2121
[ 14.633762] type=1505 audit(1252850084.598:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2121
[ 14.633792] type=1505 audit(1252850084.598:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2121
[ 14.633819] type=1505 audit(1252850084.598:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2121
[ 14.718389] type=1505 audit(1252850084.680:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2126
[ 14.718508] type=1505 audit(1252850084.680:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2126
[ 14.738051] type=1505 audit(1252850084.700:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2130
[ 17.274213] usb-storage: device scan complete
[ 17.278354] scsi 6:0:0:0: Direct-Access Generic Flash HS-CF 5.14 PQ: 0 ANSI: 0
[ 17.281469] scsi 6:0:0:1: Direct-Access Generic Flash HS-MS/SD 5.14 PQ: 0 ANSI: 0
[ 17.284747] scsi 6:0:0:2: Direct-Access Generic Flash HS-SM 5.14 PQ: 0 ANSI: 0
[ 17.289428] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 17.289494] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 17.293654] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 17.293703] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 17.297915] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 17.297965] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 20.352246] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 20.352249] vboxdrv: Successfully done.
[ 20.352250] vboxdrv: Found 4 processor cores.
[ 20.352466] VBoxDrv: dbg - g_abExecMemory=ffffffffa0a61b40
[ 20.352522] vboxdrv: fAsync=0 offMin=0x195 offMax=0x1cdd
[ 20.353180] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 20.353182] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[ 20.557948] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0c00980
[ 21.997608] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.997610] Bluetooth: BNEP filters: protocol multicast
[ 22.020810] Bridge firewalling registered
[ 23.957500] ppdev: user-space parallel port driver
[ 28.168197] e1000e 0000:00:19.0: irq 2300 for MSI/MSI-X
[ 28.225055] e1000e 0000:00:19.0: irq 2300 for MSI/MSI-X
[ 28.225694] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.648859] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 29.648862] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 29.649415] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 39.832026] eth0: no IPv6 routers present
** Affects: crash (Ubuntu)
Importance: Undecided
Status: New
--
no support 8Gb ubuntu 64 bit. only 3,2Gb
https://bugs.launchpad.net/bugs/428923
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs at lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
More information about the universe-bugs
mailing list