[Bug 425927] [NEW] wmaker not detecting usb hard drive after boot

[muenalan]

Public bug reported:

Binary package hint: wmaker

My usb hard drive is detected after boot and is fine in gnome. But when
seleting wmaker as my window manager, it is not available after booting.
Amarok or rhythmbox for example will not find music located on the disk.

TRICK: Once I plug out and in again the drive appears in the gnome-
panel/Place list (still wmaker) and when I open Nautilus once on the
drive it is fully active and I can work with it without problems.

But doing this procedure after each boot is ugly

SUGGESTION: was too stupid to get something after fiddling with pmount.
udev is also up. Actually lsusb lists the drive even so it is not
accessible to other apps.

----
Description:	Ubuntu 9.04
Release:	9.04

~ lsusb
0471:2018 Philips

~lshal
udi = '/org/freedesktop/Hal/devices/usb_device_471_2018_20000000174E'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_2'  (string)
  info.product = 'Philips USB hard disk'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_471_2018_20000000174E'  (string)
  info.vendor = 'Philips'  (string)
  linux.device_file = '/dev/bus/usb/002/003'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-6'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration = 'USB Mass Storage'  (string)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 0  (0x0)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 3  (0x3)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-6'  (string)
  usb_device.max_power = 2  (0x2)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'Philips USB hard disk'  (string)
  usb_device.product_id = 8216  (0x2018)  (int)
  usb_device.serial = '20000000174E'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Philips'  (string)
  usb_device.vendor_id = 1137  (0x471)  (int)
  usb_device.version = 2.0 (2) (double)

** Affects: wmaker (Ubuntu)
     Importance: Undecided
         Status: New

-- 
wmaker not detecting usb hard drive after boot
https://bugs.launchpad.net/bugs/425927
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs at lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs