[Bug 460802] [NEW] package mono-apache-server2 2.4.2-1 failed to install/upgrade: subprocess installed post-installation script killed by signal (Interrupt)
cmorgan
cmorgan at alum.wpi.edu
Mon Oct 26 02:07:01 UTC 2009
Public bug reported:
Ran apt-get install libapache2-mod-mono, apache didn't restart after a
minute or two, hit ctrl-c and then errors were reported about how mono-
apache-server2 was required. Console output below:
cmorgan at cmorgan-laptop:/etc/modprobe.d$ sudo apt-get install libapache2-mod-mono
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
mono-apache-server mono-apache-server2 mono-xsp2-base
The following NEW packages will be installed:
libapache2-mod-mono mono-apache-server mono-apache-server2 mono-xsp2-base
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
Need to get 228kB of archives.
After this operation, 717kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://us.archive.ubuntu.com karmic/universe mono-xsp2-base 2.4.2-1 [67.8kB]
Get:2 http://us.archive.ubuntu.com karmic/universe mono-apache-server2 2.4.2-1 [74.1kB]
Get:3 http://us.archive.ubuntu.com karmic/universe mono-apache-server 2.4.2-1 [38.9kB]
Get:4 http://us.archive.ubuntu.com karmic/universe libapache2-mod-mono 2.4.2-1 [46.9kB]
Fetched 228kB in 1s (176kB/s)
Preconfiguring packages ...
Either mono-apache-server1 or mono-apache-server2 needs
to be installed.
libapache2-mod-mono failed to preconfigure, with exit status 1
Selecting previously deselected package mono-xsp2-base.
(Reading database ... 126443 files and directories currently installed.)
Unpacking mono-xsp2-base (from .../mono-xsp2-base_2.4.2-1_all.deb) ...
Selecting previously deselected package mono-apache-server2.
Unpacking mono-apache-server2 (from .../mono-apache-server2_2.4.2-1_all.deb) ...
Selecting previously deselected package mono-apache-server.
Unpacking mono-apache-server (from .../mono-apache-server_2.4.2-1_all.deb) ...
Selecting previously deselected package libapache2-mod-mono.
Unpacking libapache2-mod-mono (from .../libapache2-mod-mono_2.4.2-1_amd64.deb) ...
Processing triggers for man-db ...
Setting up mono-xsp2-base (2.4.2-1) ...
Setting up mono-apache-server2 (2.4.2-1) ...
* Reloading web server config apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[ OK ]
* Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[ OK ]
^Cdpkg: error processing mono-apache-server2 (--configure):
subprocess installed post-installation script killed by signal (Interrupt)
dpkg: dependency problems prevent configuration of mono-apache-server:
mono-apache-server depends on mono-apache-server2 (= 2.4.2-1); however:
Package mono-apache-server2 is not configured yet.
dpkg: error processing mono-apache-server (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libapache2-mod-mono:
libapache2-mod-mono depends on mono-apache-server (>= 2.4.2) | mono-apache-server2 (>= 2.4.2) | mono-apache-server1 (>= 2.4.2); however:
Package mono-apache-server is not configured yet.
Package mono-apache-server2 is not configured yet.
Package mono-apache-server1 is not installed.
libapache2-mod-mono depends on mono-apache-server (<< 2.4.3) | mono-apache-server2 (<< 2.4.3) | mono-apache-server1 (<< 2.4.3); however:
Package mono-apache-server is not configured yet.
Package mono-apache-sNo apport report written because the error message indicates its a followup error from a previous failure.
No apport report written because the error message indicates its a followup error from a previous failure.
erver2 is not configured yet.
Package mono-apache-server1 is not installed.
dpkg: error processing libapache2-mod-mono (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
mono-apache-server2
mono-apache-server
libapache2-mod-mono
E: Sub-process /usr/bin/dpkg returned an error code (1)
cmorgan at cmorgan-laptop:/etc/modprobe.d$ sudo apt-get install libapache2-mod-mono
Reading package lists... Done
Building dependency tree
Reading state information... Done
libapache2-mod-mono is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
3 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up mono-apache-server2 (2.4.2-1) ...
Setting up mono-apache-server (2.4.2-1) ...
Setting up libapache2-mod-mono (2.4.2-1) ...
Configuration file `/etc/apache2/mods-available/mod_mono.conf'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : background this process to examine the situation
The default action is to keep your current version.
*** mod_mono.conf (Y/I/N/O/D/Z) [default=N] ? y
Installing new version of config file /etc/apache2/mods-available/mod_mono.conf ...
Using mono-apache-server2...
Enabling module mod_mono.
Run '/etc/init.d/apache2 restart' to activate new configuration!
cmorgan at cmorgan-laptop:/etc/modprobe.d$ sudo /etc/init.d/apache2 restart
* Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[ OK ]
cmorgan at cmorgan-laptop:/etc/modprobe.d$
ProblemType: Package
Architecture: amd64
Date: Sun Oct 25 21:50:34 2009
DistroRelease: Ubuntu 9.10
ErrorMessage: subprocess installed post-installation script killed by signal (Interrupt)
NonfreeKernelModules: wl nvidia
Package: mono-apache-server2 2.4.2-1
PackageArchitecture: all
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
SourcePackage: xsp
Title: package mono-apache-server2 2.4.2-1 failed to install/upgrade: subprocess installed post-installation script killed by signal (Interrupt)
Uname: Linux 2.6.31-14-generic x86_64
** Affects: xsp (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-package
--
package mono-apache-server2 2.4.2-1 failed to install/upgrade: subprocess installed post-installation script killed by signal (Interrupt)
https://bugs.launchpad.net/bugs/460802
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs at lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
More information about the universe-bugs
mailing list