[Bug 483580] [NEW] "unknown model" in gsmartcontrol --> lvm2 problem?
LAZA
laza74 at arcor.de
Mon Nov 16 12:47:28 UTC 2009
Public bug reported:
Binary package hint: gsmartcontrol
I have 3 hdds in my PC, they where all correct identified but as you can
see, gsmartcontrol shows a 4 device:
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST31000523AS
Serial Number: 5VP045NP
Firmware Version: CC34
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Nov 16 13:17:42 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST31000523AS
Serial Number: 5VP025WX
Firmware Version: CC34
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Nov 16 13:17:42 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST31500341AS
Serial Number: 9VS1WTVK
Firmware Version: CC1H
User Capacity: 1,500,301,910,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Nov 16 13:17:43 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Smartctl: please specify device type with the -d option.
Use smartctl -h to get a usage summary
laza at ubuntu:~$ sudo fdisk -l
[sudo] password for laza:
Platte /dev/sda: 1000.2 GByte, 1000204886016 Byte
255 Köpfe, 63 Sektoren/Spuren, 121601 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x00025156
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 25 200781 83 Linux
/dev/sda2 26 1241 9767520 83 Linux
/dev/sda3 1242 121601 966791700 8e Linux LVM
Platte /dev/sdb: 1000.2 GByte, 1000204886016 Byte
255 Köpfe, 63 Sektoren/Spuren, 121601 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x00023b68
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 1 121601 976760001 8e Linux LVM
Platte /dev/sdc: 1500.3 GByte, 1500301910016 Byte
255 Köpfe, 63 Sektoren/Spuren, 182401 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x00094521
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdc1 1 973 7815591 82 Linux Swap / Solaris
/dev/sdc2 974 182401 1457320410 83 Linux
laza at ubuntu:~$ gsmartcontrol-root auto -v
<warn> [hz] Warning: exit: Command line did not parse.
<error> [app] StorageDevice::execute_smartctl(): Error while executing smartctl binary.
<warn> [hz] Warning: exit: Command line did not parse.
By clicking 're-scan' the device is also present.
Ubuntu 9.10
Linux ubuntu 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 x86_64 GNU/Linux
gsmartcontrol 0.8.4-2
libgtkmm-2.4-1c2a 1:2.18.2-1
** Affects: gsmartcontrol (Ubuntu)
Importance: Undecided
Status: New
--
"unknown model" in gsmartcontrol --> lvm2 problem?
https://bugs.launchpad.net/bugs/483580
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs at lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
More information about the universe-bugs
mailing list