[Bug 377316] [NEW] led on when camera not in use, usb_submit_urb [0] err -28, lines in picture using cheese, not working with zoneminder

[sam.bowlby]

Public bug reported:

I just upgraded from 8.10 to 9.04, but while I was using 8.10 I had the
2.6.24-21 kernel installed to avoid this problem.  It would be nice to
have a current kernel and let the automatic upgrades do their thing, but
I need my camera to work!

sam at sb-64:~$ lsb_release -rd
Description:	Ubuntu 9.04
Release:	9.04

current kernel version:

sam at sb-64:~$ uname -a
Linux sb-64 2.6.28-12-generic #43-Ubuntu SMP Fri May 1 19:31:32 UTC 2009 x86_64 GNU/Linux

end of dmesg after plugging in camera:

[ 1392.512054] usb 2-7: new full speed USB device using ohci_hcd and address 5
[ 1392.725599] usb 2-7: configuration #1 chosen from 1 choice
[ 1392.727938] gspca: probing 04fc:0561
[ 1393.291983] gspca: probe ok

output of lsusb:

sam at sb-64:~$ lsusb 
Bus 001 Device 004: ID 0402:5668 ALi Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 005: ID 04fc:0561 Sunplus Technology Co., Ltd Flexcam 100
Bus 002 Device 003: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 002 Device 002: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


some stuff that appeared on dmesg while running cheese:

[ 1470.093539] gspca: usb_submit_urb [0] err -28
[ 1470.099352] ohci_hcd 0000:00:0b.0: leak ed ffff880037563230 (#81) state 2
[ 1473.164311] gspca: usb_submit_urb [0] err -28
[ 1473.167331] ohci_hcd 0000:00:0b.0: leak ed ffff880037563280 (#81) state 2

cheese would give me a picture, but it was darker than what I was
getting when running the 2.6.24-21 kernel and there were several lines
moving around on the bottom of the picture.


zoneminder doesn't seem to be working.  Before(with kernel 2.6.24-21) I could start zm and the led would come on and if there were motion it would record it.  I haven't changed anything in the zm configuration since then.  Now the led is on any time that the camera is plugged into the usb port and after I start zm and move around in front of the camera I don't get any events saved.

some more dmesg stuff after starting zoneminder:

[ 1590.106126] gspca: usb_submit_urb [0] err -28
[ 1590.109597] ohci_hcd 0000:00:0b.0: leak ed ffff8800375632d0 (#81) state 2
[ 1590.559087] gspca: usb_submit_urb [0] err -28
[ 1590.562249] ohci_hcd 0000:00:0b.0: leak ed ffff880037563320 (#81) state 2
[ 1595.346574] gspca: usb_submit_urb [0] err -28
[ 1595.349696] ohci_hcd 0000:00:0b.0: leak ed ffff880037563370 (#81) state 2
[ 1605.325577] gspca: usb_submit_urb [0] err -28
[ 1605.329778] ohci_hcd 0000:00:0b.0: leak ed ffff8800375633c0 (#81) state 2

I tried to mark this as "I don't know" for the package because I don't
know if it's gspca(which is now in the kernel) or if it's
libv4l.(launchpad told me to enter a package name, not letting me pick
the "I don't know" option)  I don't think it is cheese or zoneminder.
Something is wrong from the start when I plug it in and the LED comes
on.  This shouldn't happen unless the camera is in use.

** Affects: gspca (Ubuntu)
     Importance: Undecided
         Status: New

-- 
led on when camera not in use, usb_submit_urb [0] err -28, lines in picture using cheese, not working with zoneminder
https://bugs.launchpad.net/bugs/377316
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs at lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs